Avaliação da disponibilidade hídrica e da demanda hídrica no trecho do Rio Piranhas-Açu entre os açudes Coremas-mãe D´água e Armando Ribeiro Gonçalves

Piranhas-Açu basin is a Federal watershed with a drainage area of 43.681,5 km2, sited at Brazilian northeast semi arid, with 60% of your area in Paraiba State and 40% in Rio Grande do Norte State. The main river, Piranhas-Açu, has strategic importance for development of these states, because it s an essential source for many socio-economics activities developed along watercourse. The river s reach between Coremas-Mãe D`água Dam and Armando Ribeiro Gonçalves Dam has many irrigation projects, and supply many riverside cities. All this activities practiced in this river s reach consumes high water volumes. Due the importance of this stream and the necessity of an adequate management, this work aims for an impartial and detailed evaluation of real water supply conditions in this river s reach, by the application of hydrological modeling, including the arrangement of main dams in tributaries, and storage reservoir water balance. The rainfall-discharge model s applied in each sub-basins it was selected the model MODHISA- Hydrological Model of Semi Arid, that is a concentrated model with easy application. The simulation produced 50 years of inflows into the reservoirs, for which, were constructed the guaranties curves; and produced 50 years of synthetic discharge data in relevant points on the river and on its affluents; so it was constructed the permanence curves. Confronting the available discharge with the current and futures volumes of raw water captured in this river s reach, it was verified that de demands have high guaranties. This work concluded that the MODHISA Model is suitable to reproduce the hydrologic characteristics of Piranhas-Açu sub-basins, and showing good results

Síntese e caracterização de óxidos de zinco e de magnésio suportados em A1SBA-15 para produção de biodiesel

To overcome the challenge of meeting growing energy demand in a sustainable way, biodiesel has shown very promising as alternative energy can replace fossil fuels, even partially. Industrially, the biodiesel is produced by homogeneous transesterification reaction of vegetable oils in the presence of basic species used as catalysts. However, this process is the need for purification of the esters obtained and the removal of glycerin formed after the reaction. This context, the alternative catalysts have that can improve the process of biodiesel production, aiming to reduce costs and facilitate its production. In this study, the AlSBA-15 support with Si / Al ratio = 50 was synthesized, as like as the heterogeneous catalysts of zinc oxide and magnesium supported on mesoporous AlSBA-15 silica, in the concentrations of 5, 10, 15 and 30 %, relative to the support. The textural properties and structural characterization of catalysts and supports were determined by techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) coupled to the chemical analyzer, adsorption / desorption of N2, thermal analysis (TG / DTG), absorption spectroscopy in the infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Characterization results indicated that the support AlSBA-15 retained the hexagonal ordered after the incorporation of zinc oxide and magnesium oxide in the holder. For heterogeneous catalysts, ZnO-AlSBA-15, that was observed the presence of zinc oxide nanoparticles dispersed in the surface and interior channels of the mesoporous and microporous support. The catalytic activity was evaluated by the transesterification reaction of sunflower oil via methylic route, and some reaction parameters were optimized with the most active catalyst in biodiesel production by sunflower oil. For the series of heterogeneous catalysts, the sample with 30 % ZnO supported on AlSBA-15 showed a better conversion of triglyceride to methyl esters, about 95.41 % of reaction conditions: temperature 175 °C, with molar ratio of 42:1, stirring at 200 rpm and under a pressure of 14 bar for 6 h. The catalyst MgO-AlSBA-15 showed no catalytic activity in the studied reactions

O Serviço Social e a exclusão/inclusão social dos portadores de HIV/AIDS :demandas e desafios nos hospitais públicos

This research presents the labors developed by the Social Service unto socially excluded HIV/Aids positives at public hospitals in Rio Grande do Norte (RN). It purposes to identify and to analyze the demands brought by the holder onto the Social Service professional as well as the challenges the latter face to minister to the former. It privileges, from the methodological viewpoint, the qualitative and quantitative analysis with the application of questionnaires, direct observation, semi-structured interviews and bibliographic references. Data were collected from 12 (twelve) social assistants who work at Giselda Trigueiro Hospital in Natal (7) and Rafael Fernandes Hospital in Mossoró (5). The central hypothesis that guided this study is that the social inclusion/exclusion process experienced by the HIV/Aids positive on society implies a demand for the Social Service that is inserted in the public health context (specially in HIV-referred public hospitals), whose agents, however, when attempting to answer those demands, meet obstacles due to both the precariousness of public health services and the social complexity that concerns the HIV/Aids epidemic. Results point out that, de facto, the HIV/Aids epidemic, because of the social exclusion/inclusion process to which the holder is subject results a demand for the social agents at hospitals. Demands rise principally from the patient s life condition, considering the increasing pauperization in the epidemic context. As to what it is concerned, social assistants, responding to the needs, come across concrete twofold challenges: the illness in itself, for all social, negative aspects that make part of quotidian life of holders; and the precarious state of the public health service in RN State, since that working conditions are unsatisfactory

Uma abordagem anotativa para gerência de variabilidade em linhas de processos de software: concepção, implementação e avaliação

Nowadays, the importance of using software processes is already consolidated and is considered fundamental to the success of software development projects. Large and medium software projects demand the definition and continuous improvement of software processes in order to promote the productive development of high-quality software. Customizing and evolving existing software processes to address the variety of scenarios, technologies, culture and scale is a recurrent challenge required by the software industry. It involves the adaptation of software process models for the reality of their projects. Besides, it must also promote the reuse of past experiences in the definition and development of software processes for the new projects. The adequate management and execution of software processes can bring a better quality and productivity to the produced software systems. This work aimed to explore the use and adaptation of consolidated software product lines techniques to promote the management of the variabilities of software process families. In order to achieve this aim: (i) a systematic literature review is conducted to identify and characterize variability management approaches for software processes; (ii) an annotative approach for the variability management of software process lines is proposed and developed; and finally (iii) empirical studies and a controlled experiment assess and compare the proposed annotative approach against a compositional one. One study a comparative qualitative study analyzed the annotative and compositional approaches from different perspectives, such as: modularity, traceability, error detection, granularity, uniformity, adoption, and systematic variability management. Another study a comparative quantitative study has considered internal attributes of the specification of software process lines, such as modularity, size and complexity. Finally, the last study a controlled experiment evaluated the effort to use and the understandability of the investigated approaches when modeling and evolving specifications of software process lines. The studies bring evidences of several benefits of the annotative approach, and the potential of integration with the compositional approach, to assist the variability management of software process lines

Simulação de reservatórios de petróleo em ambiente MPSoC

The constant increase of complexity in computer applications demands the development of more powerful hardware support for them. With processor's operational frequency reaching its limit, the most viable solution is the use of parallelism. Based on parallelism techniques and the progressive growth in the capacity of transistors integration in a single chip is the concept of MPSoCs (Multi-Processor System-on-Chip). MPSoCs will eventually become a cheaper and faster alternative to supercomputers and clusters, and applications developed for these high performance systems will migrate to computers equipped with MP-SoCs containing dozens to hundreds of computation cores. In particular, applications in the area of oil and natural gas exploration are also characterized by the high processing capacity required and would benefit greatly from these high performance systems. This work intends to evaluate a traditional and complex application of the oil and gas industry known as reservoir simulation, developing a solution with integrated computational systems in a single chip, with hundreds of functional unities. For this, as the STORM (MPSoC Directory-Based Platform) platform already has a shared memory model, a new distributed memory model were developed. Also a message passing library has been developed folowing MPI standard

Implementação da técnica de software pipelining na rede em chip IPNoSyS

Alongside the advances of technologies, embedded systems are increasingly present in our everyday. Due to increasing demand for functionalities, many tasks are split among processors, requiring more efficient communication architectures, such as networks on chip (NoC). The NoCs are structures that have routers with channel point-to-point interconnect the cores of system on chip (SoC), providing communication. There are several networks on chip in the literature, each with its specific characteristics. Among these, for this work was chosen the Integrated Processing System NoC (IPNoSyS) as a network on chip with different characteristics compared to general NoCs, because their routing components also accumulate processing function, ie, units have functional able to execute instructions. With this new model, packets are processed and routed by the router architecture. This work aims at improving the performance of applications that have repetition, since these applications spend more time in their execution, which occurs through repeated execution of his instructions. Thus, this work proposes to optimize the runtime of these structures by employing a technique of instruction-level parallelism, in order to optimize the resources offered by the architecture. The applications are tested on a dedicated simulator and the results compared with the original version of the architecture, which in turn, implements only packet level parallelism

Estratégias de Produção in vitro de Bioinseticida Viral: influências do Isolado, da Cinética e do Modo de operação

Societal concerns about environmental sustainability has lead to the development of ecologically-friendly alternatives to chemical insecticides for crop protection. One such alternative is biological pest control. In particular, baculoviruses are well suited as insect biopesticides due to their narrow host specificity and relative ease of propagation. In Brazil, the baculovirus Anticarsia gemmatalis nucleopolyhedrovirus (AgMNPV) is the main biological control agent employed for the soybean pest, Anticarsia gemmatalis. This baculovirus biopesticide is currently produced using caterpillars, but increasing market demand for the product has encouraged the development of an in vitro manufacturing process, which can be scaled up to much higher virus productivities. In this study, three wild-type AgMNPV isolates (AgMNPV-2D, AgMNPV-MP2 and AgMNPV-MP5) and a recombinant form (vAgEGT-LacZ) were characterised in terms of occlusion body (OB) production and infection kinetics, to enable future optimisation of the in vitro production process. These viruses were propagated using a Spodoptera frugiperda (IPLB-SF21) insect cell line grown in shaker-flask batch cultures. Among the virus isolates tested, AgMNPV-MP5 was found to be the best producer, yielding (5.3±0.85)x108 OB/mL after 8 days post infection. The characterisation of vAgEGT-LacZ propagation in suspension cell cultures has not been previously reported in the literature; hence it became the main focus for this thesis. In particular, it was carried out a study on the effect of the multiplicity of infection (MOI) on OB production. Five successive batches were performed getting a final production (8.9±1.42)x1014 occlusion bodies, considering that production is related for a bioreactor with final volume of 10m3. A low MOI associated with a fed-batch process for vAgEGT-LacZ production was found to support a 3-fold higher OB yield when compared to the default batch process (1.8x107 and 5.3x107 OB/mL, respectively). This yield is competitive with regards to the production process.

Determinação da demanda química de oxigênio em águas por espectrofotometria simultânea dos íons crômio(III) e dicromato

Propõe-se metodologia analítica para a determinação da demanda química de oxigênio(DQO) em águas e efluentes pouco poluídos, pela espectrofotometria simultânea dos íons crômio(III) e dicromato, após a clássica oxidação sulfocrômica das amostras, à quente e catalisada por íons Ag+. Demonstra-se que a inter-relação entre as concentrações de DQO, de crômio(III) formado e de dicromato residual permite simplificar a resolução numérica do sistema - de multicomponente, envolvendo as concentrações desses dois íons, e medidas de absorbância em pelo menos dois comprimentos de onda para monocomponente, envolvendo diretamente a concentração em DQO, e medida de absorbância num único comprimento de onda.

Oxigênio dissolvido (OD), demanda bioquímica de oxigênio (DBO) e demanda química de oxigênio (DQO) como parâmetros de poluição no ribeirão Lavapés/Botucatu - SP

Oxigênio dissolvido (OD), demanda bioquímica do oxigênio (DBO) e demanda química do oxigênio (DQO) foram utilizados como parâmetros para se avaliar o grau e capacidade de autodepuração do ribeirão Lavapés, que atravessa a cidade de Botucatu - SP. Avaliou-se o perfil de poluição orgânica e identificadas as zonas de autodepuração, e pontualmente foi realizado uma coleta de 24 horas, de hora em hora, onde foi possível correlacionar a poluição orgânica com as atividades domésticas. A DQO mostrou-se como a melhor técnica para avaliar o perfil de poluição orgânica, identificar as zonas de depuração, e para avaliar a poluição orgânica, neste curso d água. A relação DQO/DBO foi em média 3,4 caracterizando um esgoto biodegradável, indicando que praticamente não existe adição de efluentes industriais, permitindo assim estimar a DBO através da DQO. Nos trechos de água limpa, nascente e foz, em que a DQO estava abaixo de 5 mg L-1 O2, foram utilizados os valores de oxigênio consumido (método do permanganato), o que não invalidou a identificação das zonas de depuração. No entanto pesquisas para desenvolver o método de DQO (dicromato) para baixas concentrações, abaixo de 5 mg L-1 são necessárias para uma melhor avaliação da recuperação do curso d água.

Locais de implante de microchips de identificação eletrônica de leitões: seleção e validação por análise de imagem

Nas últimas décadas, a produção de suínos, pressionada por uma crescente demanda por alimentos, tem-se caracterizado pela maior concentração de animais em grandes unidades de produção, dificultando o registro dos dados individuais. Os sistemas automáticos de identificação eletrônica podem auxiliar a detecção de doenças, a avaliação de respostas fisiológicas, o controle de ingestão de alimentos, a atividade física e ainda o impacto ambiental causado pelo sistema de produção, promovendo melhor controle da propriedade. Transponders injetáveis, brincos eletrônicos e o monitoramento por meio da análise de imagem estão sendo utilizados no processo de identificação. O objetivo desta pesquisa foi avaliar os diferentes locais de implante subcutâneo de microchips em leitões, verificando-se possíveis infecções e/ou rejeições, migrações dos microchips em relação ao local de implante e sua validação em relação à análise de imagem.

Protocolo para ensaios físico-químicos de estabilidade de fitocosméticos

The growing demand for stable, safe and effective cosmetics has required increasingly complex studies by the scientific community and the use of more efficient techniques to determine the stability of these products. The use of active principles from the Brazilian flora has led to the development of numerous products, in the most varied pharmaceutical forms, making it, even more difficult to standardize experimental protocols to certify the stability of cosmetic preparations. While in Brazil there is no one protocol that standardizes the tests that should be carried out to determine product stability, several studies have been conducted in academic laboratories to determine the stability of specific raw materials. The rheological properties of topical use products have to be taken into account in their manufacture, storage and application. The determination of the rheological behavior of a formulation helps in evaluating the physicochemical nature of the vehicle, allowing early signs of physical instability to be detected and thus enabling quality control of the constituents, test formulations and final products. Thermal analysis has also been used to assist in the study of cosmetic stability and differential scanning calorimetry to guide the development of new products. Other tools, such as fluorimetry and laser granulometry can be used to help the study and development of both emulsified and non-emulsified systems. The aim of the present study is to develop a protocol for the investigation of the physical and chemical stability of phytocosmetics - systems containing active compounds extracted from the Brazilian biodiversity.

Estímulo de la demanda, las inversiones y la aceleración del ritmo de crecimiento

Documento en inglés (88754) y también en: Gurrieri, Adolfo, comp.: La obra de Prebisch en la CEPAL. México, DF, Fondo de Cultura Económica, 1982, Tomo I, p. 394-423, Lecturas, No 46, (11934), ingresados en Biblioteca

Oferta, demanda e intermediación laboral: aportes para la integración de jóvenes al mercado de trabajo salvadoreño

Incluye Bibliografía

Construir eqüidade desde a infância e a adolescência na Ibero-América

Incluye Bibliografía

Planeamiento de la expansión de sistemas de transmisión considerando contingencias y demanda incierta

This paper presents a methodology and a mathematical model to solve the expansion planning problem that takes into account the effect of contingencies in the planning stage, and considers the demand as a stochastic variable within a specified range. In this way, it is possible to find a solution that minimizes the investment costs guarantying reliability and minimizing future load shedding. The mathematical model of the expansion planning can be represented by a mixed integer nonlinear programming problem. To solve this problem a specialized Genetic Algorithm combined with Linear Programming was implemented.