Robotic manipulators with vibrations: short time fourier transform of fractional spectra

This paper analyzes the signals captured during impacts and vibrations of a mechanical manipulator. In order to acquire and study the signals an experimental setup is implemented. The signals are treated through signal processing tools such as the fast Fourier transform and the short time Fourier transform. The results show that the Fourier spectrum of several signals presents a non integer behavior. The experimental study provides valuable results that can assist in the design of a control system to deal with the unwanted effects of vibrations.

A self-healing real-time system based on run-time self-reconfiguration

The new generations of SRAM-based FPGA (field programmable gate array) devices are the preferred choice for the implementation of reconfigurable computing platforms intended to accelerate processing in real-time systems. However, FPGA's vulnerability to hard and soft errors is a major weakness to robust configurable system design. In this paper, a novel built-in self-healing (BISH) methodology, based on run-time self-reconfiguration, is proposed. A soft microprocessor core implemented in the FPGA is responsible for the management and execution of all the BISH procedures. Fault detection and diagnosis is followed by repairing actions, taking advantage of the dynamic reconfiguration features offered by new FPGA families. Meanwhile, modular redundancy assures that the system still works correctly

Digitally programmable delay-locked-loop with adaptive charge pump current for UWB radar system

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e Computadores

Towards Active Course Marks for Autonomous Sailing Competitions

This paper describes the environmental monitoring / regatta beacon buoy under development at the Laboratory of Autonomous Systems (LSA) of the Polytechnic Institute of Porto. On the one hand, environmentalmonitoring of open water bodies in real or deferred time is essential to assess and make sensible decisions and, on the other hand, the broadcast in real time of position, water and wind related parameters allows autonomous boats to optimise their regatta performance. This proposal, rather than restraining the boats autonomy, fosters the development of intelligent behaviour by allowing the boats to focus on regatta strategy and tactics. The Nautical and Telemetric Application (NAUTA) buoy is a dual mode reconfigurable system that includes communications, control, data logging, sensing, storage and power subsystems. In environmental monitoring mode, the buoy gathers and stores data from several underwater and above water sensors and, in regatta mode, the buoy becomes an active course mark for the autonomous sailing boats in the vicinity. During a race, the buoy broadcasts its position, together with the wind and the water current local conditions, allowing autonomous boats to navigate towards and round the mark successfully. This project started with the specification of the requirements of the dual mode operation, followed by the design and building of the buoy structure. The research is currently focussed on the development of the modular, reconfigurable, open source-based control system. The NAUTA buoy is innovative, extensible and optimises the on board platform resources.

Investigation on AUTOSAR-Compliant Solutions for Many-Core Architectures

As of today, AUTOSAR is the de facto standard in the automotive industry, providing a common software architec- ture and development process for automotive applications. While this standard is originally written for singlecore operated Elec- tronic Control Units (ECU), new guidelines and recommendations have been added recently to provide support for multicore archi- tectures. This update came as a response to the steady increase of the number and complexity of the software functions embedded in modern vehicles, which call for the computing power of multicore execution environments. In this paper, we enumerate and analyze the design options and the challenges of porting AUTOSAR-based automotive applications onto multicore platforms. In particular, we investigate those options when considering the emerging many- core architectures that provide a more scalable environment than the traditional multicore systems. Such platforms are suitable to enable massive parallel execution, and their design is more suitable for partitioning and isolating the software components.

Marine Operations with the SWORDFISH Autonomous Surface Vehicle

IEEE Robótica 2007 - 7th Conference on Mobile Robots and Competitions, Paderne, Portugal 2007

Sistema de Controlo Remoto de Luzes de Aeródromo

Este relatório apresenta o trabalho realizado no âmbito da unidade curricular de Dissertação do Mestrado em Engenharia Electrotécnica e de Computadores – área de especialização de Automação e Sistemas. O trabalho realizado consiste no desenvolvimento de um Sistema de Controlo Remoto de Luzes de Aeródromo (SCRLA) que pode ser aplicado em paralelo aos comandos locais de controlo das luzes de aproximação, pista ou circulação, entre outras, de uma infra-estrutura aeroportuária. O objectivo fundamental deste sistema consiste em permitir ao piloto de uma aeronave o acendimento das luzes do aeródromo desde a própria aeronave, recorrendo apenas ao equipamento de rádio VHF existente a bordo da mesma e que é normalmente usado para comunicações com os serviços de controlo de tráfego aéreo. Este sistema, em aeródromos com possível operação nocturna (e.g., heliportos de hospitais), permite uma redução dos custos associados a despesas com eventual pessoal técnico ou a redução da carga de trabalho neste, e uma diminuição do consumo de energia eléctrica, uma vez que as luzes apenas são acendidas quando necessário. Este sistema permite também reduzir a poluição luminosa no ambiente e contribui positivamente para a longevidade dos equipamentos luminosos. No desenvolvimento do sistema, foram adquiridos e/ou aplicados conhecimentos nas áreas de navegação aérea, infra-estruturas aeroportuárias, telecomunicações, normalização e estandardização, electrónicas analógica e digital, programação de baixo nível em microcontroladores, desenho e construção de circuitos impressos, desenho e construção mecânica.

Learning sustainability by developing a solar dryer for microalgae retrieval

The development of nations depends on energy consumption, which is generally based on fossil fuels. This dependency produces irreversible and dramatic effects on the environment, e.g. large greenhouse gas emissions, which in turn cause global warming and climate changes, responsible for the rise of the sea level, floods, and other extreme weather events. Transportation is one of the main uses of energy, and its excessive fossil fuel dependency is driving the search for alternative and sustainable sources of energy such as microalgae, from which biodiesel, among other useful compounds, can be obtained. The process includes harvesting and drying, two energy consuming steps, which are, therefore, expensive and unsustainable. The goal of this EPS@ISEP Spring 2013 project was to develop a solar microalgae dryer for the microalgae laboratory of ISEP. A multinational team of five students from distinct fields of study was responsible for designing and building the solar microalgae dryer prototype. The prototype includes a control system to ensure that the microalgae are not destroyed during the drying process. The solar microalgae dryer works as a distiller, extracting the excess water from the microalgae suspension. This paper details the design steps, the building technologies, the ethical and sustainable concerns and compares the prototype with existing solutions. The proposed sustainable microalgae drying process is competitive as far as energy usage is concerned. Finally, the project contributed to increase the deontological ethics, social compromise skills and sustainable development awareness of the students.

Influence of Prolonged Wearing of Unstable Shoes on Upright Standing Postural Control

Objective: To study the influence of prolonged wearing of unstable shoes on standing postural control in prolonged standing workers. Methods: The participants were divided into two groups: one wore unstable shoes while the other wore conventional shoes for 8 weeks. Stabilometry parameters related to centre of pressure (CoP), rambling (RM) and trembling (TR) as well as the total agonist/antagonist muscle activity, antagonist co-activation and reciprocal activation were evaluated during upright standing, before and after the 8 week period. In both moments, the subjects were evaluated wearing the unstable shoes and in barefoot. Results: The unstable shoe condition presented increased CoP displacement related variables and decreased co-activation command compared to barefoot before and after the intervention. The prolonged wearing of unstable shoes led to: (1) reduction of medial-lateral CoP root mean square and area; (2) decreased anteroposterior RM displacement; (3) increased anteroposterior RM mean velocity and mediolateral RM displacement; (4) decreased anteroposterior TR RMS; and (5) increased thigh antagonist co-activation in the unstable shoe condition. Conclusion: The unstable shoe condition is associated to a higher destabilizing effect that leads to a selection of more efficient and accurate postural commands compared to barefoot. Prolonged wearing of unstable shoes provides increased effectiveness and performance of the postural control system, while wearing of unstable shoes in upright standing, that are reflected by changes in CoP related variables and by a reorganization of postural control commands.

Visualizing control systems performance: A fractional perspective

This article presents a novel method for visualizing the control systems behavior. The proposed scheme uses the tools of fractional calculus and computes the signals propagating within the system structure as a time/frequency-space wave. Linear and nonlinear closed-loop control systems are analyzed, for both the time and frequency responses, under the action of a reference step input signal. Several nonlinearities, namely, Coulomb friction and backlash, are also tested. The numerical experiments demonstrate the feasibility of the proposed methodology as a visualization tool and motivate its extension for other systems and classes of nonlinearities.

Projeto de sistema de gestão técnica centralizada integrando Smart Panels: edifício comercial como caso de estudo

Os Sistemas de Gestão Técnica Centralizada (SGTC) assumem-se como essenciais nos grandes edifícios, já que permitem monitorizar, controlar, comandar e gerir, de forma facilitada, integrada e otimizada, as várias instalações existentes no edifício. O estado da arte de um SGTC baseia-se numa arquitetura distribuída, com recurso a Quadros de Gestão Técnica (QGT) que incluem Automation Servers - equipamentos nativos nos protocolos de comunicação mais comummente utilizados neste âmbito, incorporadores de funcionalidades e programações pré-definidas, e que ficarão responsáveis por integrar na sua área de influência, um conjunto de pontos de SGTC, definidos em projeto. Numa nova filosofia de instalação, integração e comunicação facilitada entre dispositivos que nos quadros elétricos geram dados relevantes para o utilizador e desencadeiam ações úteis na gestão de uma instalação, surge o novo conceito no mercado de Smart Panels, da Schneider Electric. Este sistema baseia-se numa ampla e diversa gama de possibilidades de medição e monitorização energética e da própria aparelhagem, com um sistema de comunicação com o sistema de gestão e controlo da instalação integrado no próprio quadro, dispensando assim a necessidade de um sistema externo (QGT), de recolha, comunicação e processamento de informação. Após o estudo descritivo teórico dos vários tópicos, questões e considerações relacionadas com os SGTC, os Smart Panels e a sua integração, o projeto e estudo comparativo do SGTC sem e com a integração de Smart Panels num grande centro comercial, permitiu concluir que a integração de Smart Panels num SGTC pode conferir vantagens no que diz respeito à implificação do projeto, da instalação, do comissionamento, programação, e da própria exploração da instalação elétrica, traduzindo-se numa redução dos custos normalmente elevados inerentes à mão de obra associada a todos estes processos.

Weekly tracking of stability of the flow of conversations into the subprocesses of the Last Planner System

21st Annual Conference of the International Group for Lean Construction – IGLC 21 – Fortaleza, Brazil

Bullwhip effect, in production control: a comparison between traditional methods and LPS

21th Annual Conference of the International Group for Lean Construction (IGLC 21), July 2013, Fortaleza, Brazil

eVentos 2 - Autonomous sailboat control

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Design of a tool to study the fate of Chlamydia trachomatis infected cells

Chlamydia trachomatis has a unique obligate intracellular developmental cycle that ends by the lysis of the cell and/or the extrusion of the bacteria in order to allow for re-infections. While Chlamydia trachomatis infections are often asymptomatic the diagnosis of Chlamydia trachomatis is usually late, occurring after manifestation of persistency. Investigations on the consequences of long-term infections and the molecular mechanisms behind it will reveal light to what extent bacteria can modulate host cell function and what the ultimate fate of host cells after clearance of an infection is. Such studies on the host cell fate could be greatly facilitated if the infected cells become permanently marked during and after the infection. Therefore, this project intends to develop a new genetic tool that would allow permanently labeling of Chlamydia trachomatis host cells. The plan was to generate a Chlamydia trachomatis strain that encodes a recombinant CRE recombinase, fused to a secretory effector function of the Chlamydia type 3 secretion system (T3SS). Upon translocation into the host cell, this recombinant CRE enzyme could then, owing to its site-specific recombination function, switch a reporter gene contained in the host cell genome. To this end, the reporter line carried a membrane-tagged tdTomato (mT) gene flanked by two LoxP sequences followed by a GFP gene. The translocation of the recombinant CRE recombinase into this cell line was designed to trigger the recombination of the LoxP sites whereby the cells would turn from red fluorescence to green as an irreversible label of the infected cells. Successful execution of this mechanism would allow to draw a direct link between Chlamydia trachomatis infection and the subsequent fate of the infected cell.