Programação linear inteira aplicada ao aproveitamento do palhiço da cana-de-açúcar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação das condições de secagem no rendimento e na qualidade do óleo de linhaça (Linum usitatissimum L.)

De origem asiática, a semente de linhaça (Linum usitatissimum L.) pertence à família das Lináceas e é obtida a partir do linho. A semente da linhaça é ainda a maior fonte alimentar de lignanas, compostos fotoquímicos parecidos com o estrogênio, que podem desempenhar ação anticancerígena. Rica em fibras solúveis tem aproximadamente 40% do seu peso composto por óleos ricos em Ômega 3, entre os quais se destaca o α-linolênico. A secagem é a operação unitária segundo o qual ocorre eliminação da água por evaporação ou sublimação, presente em um material, mediante a aplicação de calor com condições controladas. Visando averiguar o comportamento das sementes de linhaça durante a operação de secagem, o presente trabalho teve como objetivo principal realizar o planejamento experimental e analisar estatísticamente os resultados empregados para quantificar a influência da temperatura do ar (T), tempo de secagem (t), velocidade do ar de fluidização (Uf) e carga de sólidos (Cs), sobre a razão de umidade (Xr), rendimento em óleo (Rend.) e os parâmetros oleoquimicos. A estimativa do ponto ótimo de operação foi determinada em função das variáveis de entrada aplicando o conceito de desejabilidade global. Dentre as condições estabelecidas neste trabalho, o valor ótimo da Função Desejabilidade é quando T é deslocada próximo ao nível alto (72 oC), t para o mínimo (3 h), Uf para o ponto próximo ao central (0,83 m/s) e a Cs para o nível alto (500g), obtendo-se assim: 0,126 para Xr; 36,92 % para Rend.; 4,51 mg KOH/g para IA; 22,52 meqO2/Kg IP e 0,31% para DC. Foram obtidas as isotermas de dessorção das sementes de linhaça nas temperaturas de 40, 60 e 80°C. Os dados experimentais foram avaliados usando seis modelos matemáticos. A entalpia e a entropia diferencial de dessorção foram estimadas por meio das relações de Clausius-Clapeyron e Gibbs-Helmholtz, respectivamente. Os modelos de GAB e Peleg ajustaram adequadamente os dados experimentais. A teoria da compensação entalpia-entropia foi aplicada com sucesso às isotermas de dessorção e indica que o mecanismo de dessorção de umidade das sementes de linhaça pode ser considerado como controlado pela entalpia. A secagem das sementes de linhaça previamente umidificadas foram avaliadas em um secador de leito fixo e fluidizado, as corridas experimentais foram realizadas nas temperaturas de 40, 60 e 80°C, dentre dos cinco modelos propostos, o modelo de Midilli et al, foi o melhor modelo que melhor ajustou aos dados experimentais. Foi observado que a difusividade efetiva para as sementes de linhaça aumentou com a elevação da temperatura do ar de secagem para a secagem em leito fixo e fluidizado. A dependência da difusividade em relação à temperatura foi descrita pela equação de Arrhenius, por meio da qual se estimou para ambos os processos de secagem.

Simulação da dispersão de poluentes atmosféricos e avaliação da qualidade do ar na área de abrangência do Distrito Industrial de Barcarena-PA

A poluição atmosférica é considerada atualmente um dos maiores problemas da sociedade contemporânea, por ameaçar sua qualidade de vida, pois gera impactos negativos no meio ambiente natural e antrópico. Dentre as formas de controle da poluição atmosférica de fontes fixas podem-se destacar a diluição das emissões na atmosfera devido aos efeitos de dispersão, a adoção de equipamentos de controle antes do lançamento dos gases ou a realocação de fonte, visto ser uma possibilidade a ser sugerida durante o procedimento de licenciamento ambiental de empreendimentos com potencial poluidor do ar. Atualmente modelos computacionais de dispersão de poluentes na atmosfera vêm sendo amplamente utilizados na simulação da concentração de poluentes, visando auxiliar órgãos ambientais no prognóstico da qualidade do ar ou suprir deficiências de monitoramento de emissões atmosféricas. O presente trabalho estudou a qualidade do ar e avaliou a dispersão de poluentes atmosféricos sobre Vila do Conde e áreas de influência do Distrito Industrial de Barcarena, no município de Barcarena, estado do Pará, com auxílio do modelo AERMOD View, visto a possibilidade de se estabelecer uma relação entre os níveis de emissões dos poluentes na fonte, com as concentrações dos mesmos no ar, bem como identificar pontos críticos de poluição. O Índice de Qualidade do Ar – IQA e as fragilidades das populações humanas das áreas afetadas pelos poluentes atmosféricos, também foram mensurados na pesquisa. A metodologia empregada permitiu mensurar a concentração média de poluentes atmosféricos durante um determinado tempo de modelagem, informações quanto ao alcance da pluma de poluentes foram alcançados também. São fornecidos ainda informações quanto à relação entre o valor de pico e o valor médio da concentração nas áreas receptoras, provocadas por empreendimentos com características operacionais similares ao modelado. Os resultados demostram que a influência de parâmetros meteorológicos, na dispersão de poluentes são indispensáveis e determinantes na previsão do impacto na qualidade do ar e no planejamento do uso e ocupação do solo de áreas que abrigam atividades poluidoras da atmosfera.

Drying kinetics and quality of natural coffee

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Epidemiological Models of Directly Transmitted Diseases: An Approach via Fuzzy Sets Theory

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estimativa das emissões de monóxido de carbono por veículos automotivos na cidade de Campinas/SP utilizando o modelo CAL3QHCR

Air pollution is an environmental issue worldwide and frequently cause negative effects on population health and ecosystems on cities. The relationship between climate and atmospheric pollution can be used as a surrogate to the intensity of air pollution. The present and quantity of some gases can be used as indicators to air quality: particulate matter (PM), sulfur dioxide (SO2), carbon monoxide (CO), ozone (O3), and nitrogen dioxide (NO2). Among those gases, CO has its major source within the cities, where automobiles are the main emitter. But measure pollutant concentration are challenging, sometimes because the lack of good equipments due to high costs and of the large variability of models that varies in precision, way of measure and distribution of sellers. Modeling are useful when there are an intend to evaluate air pollution, its sources and evaluate scenarios. This work aims to use CAL3QHCR model developed by the U.S Environmental Protection Agency (EPA) to generate predictive surfaces of CO concentration distribution on a site within Campinas city, located in São Paulo state, Brazil. CAL3QHCR model use data urban automobile circulation to generate spatial results for CO distribution. We observed that the pollution concentration was lower on our modeling than the concentrations measured by Companhia Ambiental do Estado de São Paulo (CETESB), the main environmental company on the São Paulo state. Also the correlation between average estimates of our model and the measure by CETESB was weak, indicating that the model used on this study need to be or better parameterized, or the scale we measured of CO emissions need to be rescaled. Although the model failed to correlate to CETESB data, maybe one that explore the estimated emissions distributed within the sites to understand spatial distributions of CO on the regions. Also, the generated information can also be used to other studies, and come to be useful to explain heat island

Despacho ótimo de potências ativa e reativa de sistema elétricos multi-áreas considerando restrições físicas, econômicas e ambientais =: Envronmentally constrained active-reactive optimal power flow-a compromising strategy for economic-emission dispatch and a multi-area paradigm

Pós-graduação em Engenharia Elétrica - FEIS

Mathematical modeling of a continuous alcoholic fermentation process in a two-stage tower reactor cascade with flocculating yeast recycle

Experiments of continuous alcoholic fermentation of sugarcane juice with flocculating yeast recycle were conducted in a system of two 0.22-L tower bioreactors in series, operated at a range of dilution rates (D (1) = D (2) = 0.27-0.95 h(-1)), constant recycle ratio (alpha = F (R) /F = 4.0) and a sugar concentration in the feed stream (S (0)) around 150 g/L. The data obtained in these experimental conditions were used to adjust the parameters of a mathematical model previously developed for the single-stage process. This model considers each of the tower bioreactors as a perfectly mixed continuous reactor and the kinetics of cell growth and product formation takes into account the limitation by substrate and the inhibition by ethanol and biomass, as well as the substrate consumption for cellular maintenance. The model predictions agreed satisfactorily with the measurements taken in both stages of the cascade. The major differences with respect to the kinetic parameters previously estimated for a single-stage system were observed for the maximum specific growth rate, for the inhibition constants of cell growth and for the specific rate of substrate consumption for cell maintenance. Mathematical models were validated and used to simulate alternative operating conditions as well as to analyze the performance of the two-stage process against that of the single-stage process.

Development of a simple method for determination of NO2 in air using digital scanner images

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adsorção de cádmio em Latossolos sob vegetação de mata nativa e cultivados

Heavy metals are found naturally in soils at low concentrations, but their content may be increased by human activity, making them one of the barriers in management of tropical soils. These chemical elements can be found in the composition of organic and inorganic fertilizers, insecticides, fungicides, mine tailings, and urban waste, and may cause serious damage to the environment and human health. Thus, adsorption studies are essential in assessing the behavior of heavy metals in the soil. The objective of this study was to evaluate the influence of soil chemical, particle size, and mineralogical properties on adsorption of cadmium (Cd), evaluated by Langmuir and Freundlich models, in Latossolos (Oxisols) with or without human activity. Soil samples were collected from the surface layer, 0.00-0.20 m, and chemical, particle size, and mineralogical analyzes were performed. In the adsorption study, concentrations of 0, 5, 25, 50, 100, 200, 300, and 400 mu g L-1 of Cd were used in the form of Cd(NO3)(2). The empirical mathematical models of Langmuir and Freundlich were used for construction of adsorption isotherms. Data were analyzed by means of multivariate statistical techniques, Cluster Analysis and Principal Component Analysis. The data from the adsorption experiment showed a good fit to the Langmuir and Freundlich models. Soils with a lower goethite/hematite ratio and greater cation exchange capacity and pH, showed higher maximum adsorption capacity of Cd.

Theoretical approaches to forensic entomology: I. Mathematical model of postfeeding larval dispersal

An overall theoretical approach to model phenomena of interest for forensic entomology is advanced. Efforts are concentrated in identifying biological attributes at the individual, population and community of the arthropod fauna associated with decomposing human corpses and then incorporating these attributes into mathematical models. In particular in this paper a diffusion model of dispersal of post feeding larvae is described for blowflies, which are the most common insects associated with corpses.

Utilização da modelagem sistêmica para analisar o efeito da variação climática no parâmetro produtividade da água na laranja Natal (Citrus sinensis L. Osbeck) no Estado de São Paulo

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

The role of clouds in improving the regression model for hourly values of diffuse solar radiation

The study introduces a new regression model developed to estimate the hourly values of diffuse solar radiation at the surface. The model is based on the clearness index and diffuse fraction relationship, and includes the effects of cloud (cloudiness and cloud type), traditional meteorological variables (air temperature, relative humidity and atmospheric pressure observed at the surface) and air pollution (concentration of particulate matter observed at the surface). The new model is capable of predicting hourly values of diffuse solar radiation better than the previously developed ones (R-2 = 0.93 and RMSE = 0.085). A simple version with a large applicability is proposed that takes into consideration cloud effects only (cloudiness and cloud height) and shows a R-2 = 0.92. (C) 2011 Elsevier Ltd. All rights reserved.

Urban Air Pollutants are Significant Risk Factors for Asthma and Pneumonia in Children: The Influence of Location on the Measurement of Pollutants

Background: Air pollution is associated with a substantial burden on human health; however, the most important pollutants may vary with location. Proper monitoring is necessary to determine the effect of these pollutants on respiratory health. Objectives: This study was designed to evaluate the role of outdoor, indoor and personal exposure to combustion-related pollutants NO2 and O-3 on respiratory health of children in a non-affluent urban area of Sao Paulo, Brazil. Methods: Levels of NO2 and O-3 were continuously measured in outdoor and indoor air, as well as personal exposure, for 30 days using passive measurement monitors. Respiratory health was assessed with a Brazilian version of the ISAAC questionnaire. Results: Complete data were available from 64 children, aged 6-10 years. Respiratory morbidity was high, with 43 (67.2%) reporting having had wheezing at any time, 27 (42.2%) wheezing in the last month, 17 (26.6%) asthma at any time and 21(32.8%) pneumonia at any time. Correlations between levels of NO2 and O-3 measured in the three locations evaluated were poor. Levels of NO2 in indoor air and personal exposure to O-3 were independently associated with asthma (both cases P=.02), pneumonia (O-3, P=.02) and wheezing at any time (both cases P<.01). No associations were seen between outdoor NO2 and O-3 and respiratory health. Conclusions: Exposure to higher levels of NO2 and O-3 was associated with increased risk for asthma and pneumonia in children. Nonetheless, the place where the pollutants are measured influences the results. The measurements taken in indoor and personal exposure were the most accurate. (C) 2012 SEPAR. Published by Elsevier Espana, S.L. All rights reserved.

Impact of urban atmospheric environment on hospital admissions in the elderly

OBJECTIVE: To analyze the impact of intra-urban atmospheric conditions on circulatory and respiratory diseases in elder adults. METHODS: Cross-sectional study based on data from 33,212 hospital admissions in adults over 60 years in the city of Sao Paulo, southeastern Brazil, from 2003 to 2007. The association between atmospheric variables from Congonhas airport and bioclimatic index, Physiological Equivalent Temperature, was analyzed according to the district's socioenvironmental profile. Descriptive statistical analysis and regression models were used. RESULTS: There was an increase in hospital admissions due to circulatory diseases as average and lowest temperatures decreased. The likelihood of being admitted to the hospital increased by 12% with 1 degrees C decrease in the bioclimatic index and with 1 degrees C increase in the highest temperatures in the group with lower socioenvironmental conditions. The risk of admission due to respiratory diseases increased with inadequate air quality in districts with higher socioenvironmental conditions. CONCLUSIONS: The associations between morbidity and climate variables and the comfort index varied in different groups and diseases. Lower and higher temperatures increased the risk of hospital admission in the elderly. Districts with lower socioenvironmental conditions showed greater adverse health impacts.