Antibiofilm strategies in the food industry

Biofilms in food processing plants represent not only a problem to human health but also cause economic losses by technical failure in several systems. In fact, many foodborne outbreaks have been found to be associated with biofilms. Biofilms may be prevented by regular cleaning and disinfection, but this does not completely prevent biofilm formation. Besides, due to their diversity and to the development of specialized phenotypes, it is well known that biofilms are more resistant to cleaning and disinfection than planktonic microorganisms. In recent years, a considerable effort has been made in the prevention of microbial adhesion and biofilm formation on food processing surfaces and novel technologies have been introduced. In this context, this chapter discusses the main conventional and emergent strategies that have been employed to prevent bacterial adhesion to food processing surfaces and thus to efficiently maintain good hygiene throughout the food industries.

Introduction [to Food Safety in the Seafood Industry: A practical guide for ISO 22000 and FSSC 22000 implementation]

The prelims comprise: * Half-Title Page * Dedication Page * Title Page * Copyright Page * Table of Contents * Foreword * Acknowledgements * Disclaimer * Introduction

Gestão integrada dos recursos hídricos da região de Fafe: caracterização da qualidade das águas superficiais, potencial hidrogeológico das rochas fraturadas

Dissertação de mestrado em Geociências (área de especialização em Recursos Geológicos)

How does banking industry influence economic growth in Latin American countries?

Mestrado em Finanças

Sustentabilidad del monocultivo de soja y otras alternativas agrícolas, en relación a los recursos suelo y agua, en la Región Centro-Norte de Córdoba. Sustainability of soybean monoculture and another agricultural alternatives, in relation to soil and water natural resources, in the north-central area of Cordoba (Argentina).

En este proyecto se pretende demostrar que existen alternativas sustentables al monocultivo de soja y económicamente factibles si se consideran los costos ambientales.Se cumplirán los siguientes objetivos específicos:- Caracterizar la sensibilidad de indicadores de calidad del suelo: infiltración, densidad aparente, penetrometría, C orgánico, fracciones de la MO y un índice químico de disponibilidad de N. - Medir escurrimiento y erosión en dos microcuencas con manejos contrastantes donde existe instrumental instalado y registros desde hace mas de 10 años.- Establecer rangos para las situaciones encontradas en los suelos representativos de la región.- Integrar los parámetros considerados en un sistema de diagnóstico de calidad/salud del suelo, para las condiciones de la región. - Aplicar el sistema de Calidad/salud del suelo para situaciones con monocultivo de soja y otras alternativas.- Calibrar y aplicar el modelo de simulación de la materia orgánica AMG, al monocultivo de soja y otras alternativas, a distintas escalas temporales y espaciales.- Estimar los costos ambientales de monocultivo a partir de los datos obtenidos.- Extrapolar los resultados del monocultivo y las otras alternativas a los suelos característicos, para estimar la sustentabilidad de los suelos en el centro-norte de la provincia de Córdoba.Se trabajará en dos áreas piloto en campos de productores, con y sin erosión hídrica. Se evaluarán parámetros indicadores del estado de los suelos, se los integrará en un sistema, se evaluarán los suelos con situaciones de monocultivo de soja y manejos contrastantes y se los correlacionará con su historial de intervención antrópica. Se brindará una herramienta apta para el ordenamiento territorial.

Impacto de las prácticas agrícolas en los recursos hídricos de la provincia de Córdoba: aislamiento y caracterización de bacterias degradadoras de pesticidas para su utilización en procesos de biorremediación. Impact of agricultural activities on aquatic environments of Córdoba: isolation and characterization of bacteria with pesticide removal capacities for bioremediation treatments.

Los sistemas de agua dulce constituyen fuentes vitales para el desarrollo de la vida. Entre otras causas, el excesivo y poco controlado uso de pesticidas por las prácticas agrícolas modernas ha contribuido con la degradación de estos ecosistemas en la provincia de Córdoba (Secretaría de Ambiente, 2008). Los pesticidas son compuestos tóxicos y químicamente estables en el ambiente. Diversas especies microbianas presentan la capacidad para mineralizar dichos compuestos, siendo uno de los mecanismos de descomposición más importante. En el presente trabajo se pretende (1) Detectar y cuantificar principios activos de pesticidas en diferentes aguas ambientales de la región centro-sur de la provincia de Córdoba; (2) Aislar y caracterizar especies bacterianas a partir de muestras de aguas superficiales y subterráneas de la región que demuestren ser eficientes en la biodegradación de diferentes pesticidas. Para ello, se estudiará la presencia de 10 pesticidas organoclorados y organofosforados (lindano, 2,4D, DDT, p,p-DDE, �-endosulfán, �-endosulfán, clorpirifós, dimetoato) y herbicidas (atrazina) en muestras de agua superficiales y subterráneas (8 - 12m de profundidad) de la región agrícola centro-sur de Córdoba. Se establecerán diferentes puntos de muestreo en las principales cuencas hidrográficas: Río Tercero y Embalse de Río Tercero, Canal Desviador de Bell Ville, Laguna La Salada, Río Saladillo, Río Carcarañá y Río Cuarto. La determinación de pesticidas se realizará mediante Cromatografía de Gases (GC). Conjuntamente, se realizará el aislamiento de microorganismos a partir de las muestras de agua suplementadas con diferentes concentraciones de pesticidas (López et al., 2005) y se procederá a la caracterización morfológica y bioquímica (Lechevalier, 1989). Se realizarán curvas de crecimiento (DO600) y se determinará la viabilidad celular mediante el método de recuento en placa. El potencial catabólico de cada aislamiento se determinará analizando la concentración residual de pesticidas en el sobrenadante de los cultivos (Benimeli et al, 2003) y mediante ensayos de resting-cell (Hernández et al, 2008). Finalmente se realizará la caracterización genética (Weisburg, 1991) de los aislamientos que demuestren una mayor eficiencia en la biodegradación de pesticidas. El presente estudio pretende abordar una temática prioritaria como es la contaminación ambiental de ecosistemas acuáticos de la provincia de Córdoba. la detección de principios activos de pesticidas sería, por lo tanto, un indicador de contaminación de origen antropológica y brindaría información respecto al deterioro de la calidad del agua. Por otra parte, el aislamiento de bacterias adaptadas a las condiciones ecológicas de la región y capaces de metabolizar eficientemente diferentes pesticidas como fuentes de carbono y energía sería beneficioso para su utilización en futuros ensayos de biorremediación.

Dispersión agrícola y cambio social en las Sierras de Córdoba (ca. 1000 a C.- 1600 d C.) Agricultural spread and social change in Córdoba Hills (ca. 1000 b C- 1600 a D.)

El proceso cultural en las Sierras de Córdoba fue habitualmente concebido como marginal con respecto al Noroeste Argentino. Tras el establecimiento del esquema básico de la secuencia prehispánica, a mediados del siglo pasado, se definió una etapa agroalfarera de cronología tardía, que continuaba a una extensa etapa precerámica cuyos límites se aproximaban a la transición Pleistoceno-Holoceno. Se hacía referencia, de este modo, al advenimiento de un modo de vida agrícola y aldeano, que reemplazaba a otro basado en la caza y recolección. Dicha transformación, alternativamente atribuida a la población cazadora local o a una migración de grupos agricultores desde regiones vecinas, se habría consumado hacia 1500 AP, fijando uno de los límites de la dispersión de la agricultura andina. Es necesario destacar la extremada escasez y el carácter indirecto de las evidencias arqueológicas utilizadas para sustentar la ocurrencia de tal proceso. Asimismo, la vigencia de supuestos que han comenzado a mostrar inconsistencias con los resultados de las recientes investigaciones. Entre ellos, principalmente, el que asume que la introducción de la agricultura dio paso a una transformación radical de las sociedades prehispánicas, constituyendo un hito fundamental en su devenir histórico, el comienzo de una nueva etapa. Nuestros últimos estudios en el sector central de las Sierras de Córdoba apuntaron, entre otros objetivos, a reconocer indicadores arqueológicos directos de producción agrícola, así como de la manipulación y consumo de plantas cultivadas. Los primeros resultados nos permiten vislumbrar un escenario complejo que desafía los modelos vigentes. El consumo de maíz, por ejemplo, parece haber antecedido por muchos siglos a la adopción de prácticas agrícolas. El acceso a este cultígeno, sumado a otros elementos, indicaría cambios entre los cazadores-recolectores serranos, promovidos por su integración en redes macrorregionales que los vincularon con sociedades agricultoras de la vertiente oriental andina y quizás del Chaco Santiagueño, por lo menos desde 2500 AP. En definitiva, la agricultura no parece haber sido adoptada rápidamente ni provocado transformaciones profundas e inmediatas en la organización de los grupos prehispánicos. Se ha observado, por el contrario, la incorporación gradual de distintas innovaciones que incluso permiten relacionar la manipulación y más tarde el cultivo de plantas domesticadas, con procesos de intensificación productiva de mayor escala temporal. Uno de nuestros objetivos en este proyecto consiste, básicamente, en profundizar las investigaciones en curso a fin de ampliar el cuerpo de datos con el cual analizar y discutir el problema de la dispersión agrícola en la región. Ello implica el tratamiento de diferentes líneas de evidencia, en particular: 1) la distribución regional de sitios arqueológicos y las modalidades de ocupación de las tierras cultivables; 2) la búsqueda de superficies de cultivo en sitios estratificados; y 3) estudios arqueobotánicos, polínicos y de isótopos estables. Se entiende que no le corresponde a la arqueología asumir apriorísticamente el significado histórico de la introducción de la agricultura, sino establecerlo en cada caso puntual a través de la investigación concreta. Nuestro segundo objetivo consiste, por lo tanto, en delinear los cambios (económicos, tecnológicos, políticos, sociales) que acompañaron al proceso de dispersión agrícola. Ello implica el tratamiento de diferentes problemas, entre otros: 1) las prácticas de apropiación de los recursos silvestres; 2) la continuidad y cambio tecnológico; 3) la movilidad y la articulación microambiental; y 4) los aspectos políticos y sociales ligados a prácticas como la molienda grupal y la producción del arte rupestre. The radical chage of societies from hunter-gatherers to farmers in 1500 BP was considered a milestone whitin the cultural process of pre-hispanic societies in Cordoba Hill. But there is a shortage of archaeological remains to support this change and there are weak hypotheses of absolute transformations. During the last years, our studies carried out on the central area of Cordoba Hill have tried to recognize direct archaeological signs of agriculture production as well as the handling and consumption of crops. The first results show a complex set that challenges the current theoretical models. For example, the corn was probably eatten prior to its adoption for farm practices. Our first main consists in increasing a corpus of data about the spread of agriculture in Cordoba region that we have been researching for the last years. These researches involve different lines of evidence: 1-regional location of archaeological sites and kinds of occupation on cultivable lands; 2-the search for plots at archaeological sites; 3-archaeobotanical, pollen and stable isotopes studies. Our second main consists in outlining changes within the spread of agriculture. It implies to considering different problems: 1-the practices to gatherer wild resources; 2-the continuity and changes of technologies; 3-the mobility and the articulation on the micro-environment; 4-political and social aspects in connection with activities such as groupal grinding and rock art productions.

An investigation of soil quality parameters relating to agricultural reuse and land disposal options for the management of biosolids

Sludge provides valuable nutrients to soil. Application of sludge to land is subject to a number of limitations. Its use as a soil conditioner represents a "beneficial reuse option". Primary and secondary sludge from Dublin city is treated in Ringsend treatment plant where it undergoes thermal drying. This study investigates the feasibility of land application of thermally dried biosolids (TDB) from Ringsend treatment plant.

Impact of wind power generation on the electricity supply industry

The objective of this dissertation is to investigate the effect wind energy has on the Electricity Supply Industry in Ireland. Wind power generation is a source of renewable energy that is in abundant supply in Ireland and is fast becoming a resource that Ireland is depending on as a diverse and secure of supply of energy. However, wind is an intermittent resource and coupled with a variable demand, there are integration issues with balancing demand and supply effectively. To maintain a secure supply of electricity to customers, it is necessary that wind power has an operational reserve to ensure appropriate backup for situations where there is low wind but high demand. This dissertation examines the affect of this integration by comparing wind generation to that of conventional generation in the national grid. This is done to ascertain the cost benefits of wind power generation against a scenario with no wind generation. Then, the analysis examines to see if wind power can meet the pillars of sustainability. This entails looking at wind in a practical scenario to observe how it meets these pillars under the criteria of environmental responsibility, displacement of conventional fuel, cost competitiveness and security of supply.

A comparison of environmental licensing systems in operation in the wood panel manufacturing industry in the Northern Hemisphere

The objective of this thesis is to compare and contrast environmental licensing systems, for the wood panel industry, in a number of countries in order to determine which system is the best from an environmental and economic point of view. The thesis also examines the impact which government can have on industry and the type of licensing system in operation in a country. Initially, the thesis investigates the origins of the various environmental licensing systems which are in operation in Ireland, Scotland, Wales, France, USA and Canada. It then examines the Environmental Agencies which control and supervise industry in these countries. The impact which the type of government (i.e. unitary or federal) in charge in any particular country has on industry and the Regulatory Agency in that country is then described. Most of the mills in the thesis make a product called OSB (Oriented Strand Board) and the manufacturing process is briefly described in order to understand where the various emissions are generated. The main body of the thesis examines a number of environmental parameters which have emission limit values in the licenses examined, although not all of these parameters have emission limit values in all of the licenses. All of these parameters are used as indicators of the potential impact which the mill can have on the environment. They have been set at specific levels by the Environmental Agencies in the individual countries to control the impact of the mill. Following on from this, the two main types of air pollution control equipment (WESPs and RTOs) are described in regard to their function and capabilities. The mill licenses are then presented in the form of results tables which compare air results and water results separately. This is due to the fact that the most significant emission from this type of industry is to air. A matrix system is used to compare the licenses so that the comparison can be as objective as possible. The discussion examines all of the elements previously described and from this it was concluded that the IPC licensing system is the best from an environmental and economic point of view. It is a much more expensive system to operate than the other systems examined, but it is much more comprehensive and looks at the mill as a whole rather than fragmenting it. It was also seen that the type of environmental licensing system which is in place in a country can play a role in the locating of an industry as certain systems were seen to have more stringent standards attached to them. The type of standard in place in a country is in turn influenced by the type of government which is in place in that country.

Green furniture: sustainable design guidelines for the Irish furniture and wood products industry.

This thesis presents the research and development of sustainable design guidelines for the furniture and wood products industry, suitable for sustainably enhancing design, manufacturing and associated activities. This sustainable guideline is based on secondary research conducted on subject areas such as ‘eco’ design, ‘green’ branding and ‘green’ consumerism, as well as an examination of existing certifications and sustainable tools techniques and methodologies, national and international drivers for sustainable development and an overview of sustainability in the Irish furniture manufacturing context. The guideline was further developed through primary research. This consisted of a focus group attended by leading Irish designers, manufacturers and academics in the area of furniture and wood products. This group explored the question of ‘green branding’ saturation in the market and the viability of investing in sustainability just yet. Participants stated that they felt the market for ‘green’ products is evolving very slowly and that there is no metric or legal framework present to audit whether or not companies are producing products that really embody sustainability. All the participants believed that developing and introducing a new certification process to incorporate a sustainable design process was a viable and necessary solution to protecting Irish furniture and wood manufacturers going forward. For the purposes of the case study, the author investigated a ‘sustainable’ design process for Team woodcraft, Ltd., through the design and development of a ‘sustainable’ children’s furniture range. The case study followed a typical design and development process; detailing customer design specifications, concept development and refinement and cumulating in final prototype, as well as associated engineering drawings. Based on this primary and secondary research, seven fundamental core principles for this sustainable guideline have been identified by the author. The author then used these core principles to expand into guidelines for the basis of proposed new Irish sustainable design guidelines for the furniture and wood products industry, the concept of which the author has named ‘Green Dot’. The author suggests that the ‘Green Dot’ brand or logo could be used to market an umbrella network of Irish furniture designers and manufactures who implement the recommended sustainable techniques.

Computer integrated testing for the transport refrigeration systems industry.

This is a study of a state of the art implementation of a new computer integrated testing (CIT) facility within a company that designs and manufactures transport refrigeration systems. The aim was to use state of the art hardware, software and planning procedures in the design and implementation of three CIT systems. Typical CIT system components include data acquisition (DAQ) equipment, application and analysis software, communication devices, computer-based instrumentation and computer technology. It is shown that the introduction of computer technology into the area of testing can have a major effect on such issues as efficiency, flexibility, data accuracy, test quality, data integrity and much more. Findings reaffirm how the overall area of computer integration continues to benefit any organisation, but with more recent advances in computer technology, communication methods and software capabilities, less expensive more sophisticated test solutions are now possible. This allows more organisations to benefit from the many advantages associated with CIT. Examples of computer integration test set-ups and the benefits associated with computer integration have been discussed.