Creación de una demo 3D mediante gráficos procedurales

Aquest projecte consisteix en el desenvolupament d’una demo 3D utilitzant exclusivament gràfics procedurals per tal d’avaluar la seva viabilitat en aplicacions més complexes com els videojocs. En aquesta aplicació es genera un terreny aleatori explorable amb vegetació i textures creades proceduralment.

Intracellular nanomanipulation by a photonic-force microscope with real-time acquisition of a 3D stiffness matrix.

A traditional photonic-force microscope (PFM) results in huge sets of data, which requires tedious numerical analysis. In this paper, we propose instead an analog signal processor to attain real-time capabilities while retaining the richness of the traditional PFM data. Our system is devoted to intracellular measurements and is fully interactive through the use of a haptic joystick. Using our specialized analog hardware along with a dedicated algorithm, we can extract the full 3D stiffness matrix of the optical trap in real time, including the off-diagonal cross-terms. Our system is also capable of simultaneously recording data for subsequent offline analysis. This allows us to check that a good correlation exists between the classical analysis of stiffness and our real-time measurements. We monitor the PFM beads using an optical microscope. The force-feedback mechanism of the haptic joystick helps us in interactively guiding the bead inside living cells and collecting information from its (possibly anisotropic) environment. The instantaneous stiffness measurements are also displayed in real time on a graphical user interface. The whole system has been built and is operational; here we present early results that confirm the consistency of the real-time measurements with offline computations.

An analysis of visual adaptation and contrast perception for tone mapping

Tone Mapping is the problem of compressing the range of a High-Dynamic Range image so that it can be displayed in a Low-Dynamic Range screen, without losing or introducing novel details: The final image should produce in the observer a sensation as close as possible to the perception produced by the real-world scene. We propose a tone mapping operator with two stages. The first stage is a global method that implements visual adaptation, based on experiments on human perception, in particular we point out the importance of cone saturation. The second stage performs local contrast enhancement, based on a variational model inspired by color vision phenomenology. We evaluate this method with a metric validated by psychophysical experiments and, in terms of this metric, our method compares very well with the state of the art.

Patient-specific computational hemodynamics of intracranial aneurysms from 3D rotational angiography and CT angiography: an in vivo reproducibility study

Patient-specific simulations of the hemodynamics in intracranial aneurysms can be constructed by using image-based vascular models and CFD techniques. This work evaluates the impact of the choice of imaging technique on these simulations

Temporal diffeomorphic free-form deformation: application to motion and strain estimation from 3D echocardiography

This paper presents a new registration algorithm, called Temporal Di eomorphic Free Form Deformation (TDFFD), and its application to motion and strain quanti cation from a sequence of 3D ultrasound (US) images. The originality of our approach resides in enforcing time consistency by representing the 4D velocity eld as the sum of continuous spatiotemporal B-Spline kernels. The spatiotemporal displacement eld is then recovered through forward Eulerian integration of the non-stationary velocity eld. The strain tensor iscomputed locally using the spatial derivatives of the reconstructed displacement eld. The energy functional considered in this paper weighs two terms: the image similarity and a regularization term. The image similarity metric is the sum of squared di erences between the intensities of each frame and a reference one. Any frame in the sequence can be chosen as reference. The regularization term is based on theincompressibility of myocardial tissue. TDFFD was compared to pairwise 3D FFD and 3D+t FFD, bothon displacement and velocity elds, on a set of synthetic 3D US images with di erent noise levels. TDFFDshowed increased robustness to noise compared to these two state-of-the-art algorithms. TDFFD also proved to be more resistant to a reduced temporal resolution when decimating this synthetic sequence. Finally, this synthetic dataset was used to determine optimal settings of the TDFFD algorithm. Subsequently, TDFFDwas applied to a database of cardiac 3D US images of the left ventricle acquired from 9 healthy volunteers and 13 patients treated by Cardiac Resynchronization Therapy (CRT). On healthy cases, uniform strain patterns were observed over all myocardial segments, as physiologically expected. On all CRT patients, theimprovement in synchrony of regional longitudinal strain correlated with CRT clinical outcome as quanti ed by the reduction of end-systolic left ventricular volume at follow-up (6 and 12 months), showing the potential of the proposed algorithm for the assessment of CRT.

Investigation and monitoring of rock slope instabilities in Norway by terrestrial laser scanning

Long-range Terrestrial Laser Scanning (TLS) is widely used in studies on rock slope instabilities. TLS point clouds allow the creation of high-resolution digital elevation models for detailed mapping of landslide morphologies and the measurement of the orientation of main discontinuities. Multi-temporal TLS datasets enable the quantification of slope displacements and rockfall volumes. We present three case studies using TLS for the investigation and monitoring of rock slope instabilities in Norway: 1) the analysis of 3D displacement of the Oksfjellet rock slope failure (Troms, northern Norway); 2) the detection and quantification of rockfalls along the sliding surfaces and at the front of the Kvitfjellet rock slope instability (Møre og Romsdal, western Norway); 3) the analysis of discontinuities and rotational movements of an unstable block at Stampa (Sogn og Fjordane, western Norway). These case studies highlight the possibilities but also limitations of TLS in investigating and monitoring unstable rock slopes.

Flow-R, a model for susceptibility mapping of debris flows and other gravitational hazards at a regional scale

The development of susceptibility maps for debris flows is of primary importance due to population pressure in hazardous zones. However, hazard assessment by processbased modelling at a regional scale is difficult due to the complex nature of the phenomenon, the variability of local controlling factors, and the uncertainty in modelling parameters. A regional assessment must consider a simplified approach that is not highly parameter dependant and that can provide zonation with minimum data requirements. A distributed empirical model has thus been developed for regional susceptibility assessments using essentially a digital elevation model (DEM). The model is called Flow-R for Flow path assessment of gravitational hazards at a Regional scale (available free of charge under www.flow-r.org) and has been successfully applied to different case studies in various countries with variable data quality. It provides a substantial basis for a preliminary susceptibility assessment at a regional scale. The model was also found relevant to assess other natural hazards such as rockfall, snow avalanches and floods. The model allows for automatic source area delineation, given user criteria, and for the assessment of the propagation extent based on various spreading algorithms and simple frictional laws.We developed a new spreading algorithm, an improved version of Holmgren's direction algorithm, that is less sensitive to small variations of the DEM and that is avoiding over-channelization, and so produces more realistic extents. The choices of the datasets and the algorithms are open to the user, which makes it compliant for various applications and dataset availability. Amongst the possible datasets, the DEM is the only one that is really needed for both the source area delineation and the propagation assessment; its quality is of major importance for the results accuracy. We consider a 10m DEM resolution as a good compromise between processing time and quality of results. However, valuable results have still been obtained on the basis of lower quality DEMs with 25m resolution.

Towards the Automatic Merging of Lexical Resources: Automatic Mapping

Lexical Resources are a critical component for Natural Language Processing applications. However, the high cost of comparing and merging different resources has been a bottleneck to have richer resources with a broad range of potential uses for a significant number of languages.With the objective of reducing cost byeliminating human intervention, we present a new method for automating the merging of resources,with special emphasis in what we call the mapping step. This mapping step, which converts the resources into a common format that allows latter the merging, is usually performed with huge manual effort and thus makes the whole process very costly. Thus, we propose a method to perform this mapping fully automatically. To test our method, we have addressed the merging of two verb subcategorization frame lexica for Spanish, The resultsachieved, that almost replicate human work, demonstrate the feasibility of the approach.

Magnetization transfer-based 3D visualization of foot peripheral nerves.

PURPOSE: To investigate magnetization transfer (MT) effects as a new source of contrast for imaging and tracking of peripheral foot nerves. MATERIALS AND METHODS: Two sets of 3D spoiled gradient-echo images acquired with and without a saturation pulse were used to generate MT ratio (MTR) maps of 260 μm in-plane resolution for eight volunteers at 3T. Scan parameters were adjusted to minimize signal loss due to T2 dephasing, and a dedicated coil was used to improve the inherently low signal-to-noise ratio of small voxels. Resulting MTR values in foot nerves were compared with those in surrounding muscle tissue. RESULTS: Average MTR values for muscle (45.5 ± 1.4%) and nerve (21.4 ± 3.1%) were significantly different (P < 0.0001). In general, the difference in MTR values was sufficiently large to allow for intensity-based segmentation and tracking of foot nerves in individual subjects. This procedure was termed MT-based 3D visualization. CONCLUSION: The MTR serves as a new source of contrast for imaging of peripheral foot nerves and provides a means for high spatial resolution tracking of these structures. The proposed methodology is directly applicable on standard clinical MR scanners and could be applied to systemic pathologies, such as diabetes.

State of Iowa Improving Transition Outcomes Resource Mapping Workshops, 2003-2004

Iowa Vocational Rehabilitation Services, a Division of the State of Iowa Department of Education, in partnership with seven other state agencies, applied for and was awarded funding for “Improving Transition Outcomes for Youth with Disabilities Through the Use of Intermediaries.” This Innovative State Alignment Grant is funded by the Department of Labor, Office of Disability Employment Policy. For clarity and brevity, the Iowa team chose to use “Improving Transition Outcomes” as the project name, thus providing the acronym ITO. Grant funding began October 1, 2003 with the possibility of renewal for five years.

3D-partikkelit aloittelijoille : tarkastelussa 3D-Kalevala-projekti

Opinnäytteeni teososana on 3D-Kalevala projektinimellä tunnetun animaation partikkeliefektit. Tarkastelen tarkemmin elokuvan Lumi-, Kylä-, Paja- ja Luola-kohtauksia. 3D-Kalevala on tietokoneella tehty animaatio, joka kertoo Suomen kansalliseepoksen Kalevalan päähenkilöstä Väinämöisestä. Elokuvassa vanha Väinämöinen muistelee nuoruutensa tapahtumia. 3D-Kalevala-projekti käynnistettiin vuonna 2003, mutta sen alkuperäiset tekijät eivät saaneet sitä valmiiksi, ja projektin teko keskeytettiin vuonna 2005. Vuoden 2006 keväällä projektiin perustettiin uusi kahden verkkoviestinnän opiskelijan projektiryhmä, jonka tehtävänä oli saada elokuva valmiiksi vuoden 2007 kevääseen mennessä. Kun aloitimme projektin tekemisen, olin kolmiulotteisessa mallinnuksessa aloittelija. Tästä johtuen opinnäytteen kirjallinen osa on opas aloittelijoille partikkelien maailmaan. Selvitän raportissani miten elokuvan partikkeliefektit rakennettiin, mitä niiden tekeminen minulta vaati ja miten ne loppujen lopuksi mielestäni onnistuivat. Elokuvan efektit tehtiin 3D Studio Max-ohjelman versiolla 6.0, ja tämän takia kirjoitankin efektien rakentamisesta kyseisen ohjelman keinoin. Projektin suuruuden vuoksi molemmat tekijät pääsivät tekemään monenlaisia töitä, mutta päävastuualueet olivat selvät. Minun osani oli tehdä elokuvaan efektejä. Partikkeliefektit ovat proseduraalisia efektejä, joiden avulla on mahdollista tehdä aidon näköisiä luonnonilmiöitä, kuten tulta, savua, kipinöitä ja veden roiskeita. Koska partikkeliefektit mallintavat reaalimaailman ilmiöitä, on tekijän hyvä olla kiinnostunut selvittämään ilmiöiden käyttäytymistä luonnossa. Raportoin myös projektin aikana huomaamistani hyvistä tavoista opiskella itsenäisesti partikkelien rakentamiseen käytettyjä tekniikoita. On hyvä lukea 3D Studio Maxin tasokasta käyttöohjesovellusta, tutustua Internetissä löytyviin 3D-aiheisiin foorumeihin, käydä aiheesta tutoriaaleja läpi sekä tutustua ohjelman ominaisuuksiin kokeilemalla ja tutkimalla itsenäisesti. Elokuvan efektit onnistuivat mielestäni kiitettävästi ottaen huomioon lähtötasoni. Löysin tapoja kehittää itseäni ja helppoja keinoja toteuttaa realistista jälkeä efektien rakentamisessa. Toivon, että raportistani olisi jollekin 3D-partikkeliefekteistä kiinnostuneelle hyötyä.

Keskeytyneen uusmediatuotannon jatkaminen : kohteena 3D-Kalevala

Opinnäytetyöni aiheena on keskeytyneen uusmediatuotannon jatkaminen. Monimuototyön työosana toteutettiin 7-minuuttinen 3D animaatio, joka kertoo Suomen kansalliseepoksen Kalevalan taruhahmosta Väinämöisestä, muistelemassa menneitä. Projekti käynnistettiin alun perin vuonna 2003, mutta resurssien vähetessä se keskeytyi vuoden 2005 loppupuolella. Keväällä 2006 projekti käynnistettiin uuden projektiryhmän voimin, jossa olin itse mukana vastaten muun muassa tuotannonohjauksesta ja hahmoanimoinneista. Uusi projektiryhmä oli henkilöstöresursseiltaan pieni, joten vastuualueet olivat monipuolisia. Keskeytyneen projektin jatkamisen ja haltuunoton haasteellisuus sai minut kiinnostumaan tutkia aihetta tarkemmin. Tuotannonohjaajana vastasin hyvin pitkälle tuotannon uudesta käynnistämisestä ja projektin saattamisesta vihdoin loppuun. Keskeytyneen projektin haltuunotto oli tilanteena kaikille uusi, mikä heijastui vaikeuksina uudelleen käynnistettyyn tuotantoon. Raportin tarkoituksena ei ole olla projektinhallinnallinen käsikirja, sillä käsittelen vain tämän projektin jatkolle oleellisina pidettyjä asioita. Projekti toivottavasti kuitenkin antaa kuvan huolellisen projektinhallinnan ja onnistuneen tuotannonohjauksen tärkeydestä. Jokainen keskeytynyt projekti ei ole aina välttämättä elvytettävissä - ainakaan alkuperäisessä muodossaan. Projektin jatkamista tulisi katsoa aina tapauskohtaisesti. Keskeytymiseen on useimmiten syynsä, joten ongelmien selvittäminen ja niihin puuttuminen on tärkeää ennen jatkopäätöksen tekemistä. Myös projektityöskentelytavat kehittyvät ja pohdin työssäni uusien projektinhallintatapojen, kuten wikien käyttöä projektinhallinnan työkaluna ja projektiyhteisön välistä viestintää edistävänä työkaluna.

Comparison between standard radiography and spiral CT with 3D reconstruction in the evaluation, classification and management of tibial plateau fractures.

The aim of this study was to compare the diagnostic efficiency of plain film and spiral CT examinations with 3D reconstructions of 42 tibial plateau fractures and to assess the accuracy of these two techniques in the pre-operative surgical plan in 22 cases. Forty-two tibial plateau fractures were examined with plain film (anteroposterior, lateral, two obliques) and spiral CT with surface-shaded-display 3D reconstructions. The Swiss AO-ASIF classification system of bone fracture from Muller was used. In 22 cases the surgical plans and the sequence of reconstruction of the fragments were prospectively determined with both techniques, successively, and then correlated with the surgical reports and post-operative plain film. The fractures were underestimated with plain film in 18 of 42 cases (43%). Due to the spiral CT 3D reconstructions, and precise pre-operative information, the surgical plans based on plain film were modified and adjusted in 13 cases among 22 (59%). Spiral CT 3D reconstructions give a better and more accurate demonstration of the tibial plateau fracture and allows a more precise pre-operative surgical plan.

Mapping the structural core of human cerebral cortex.

Structurally segregated and functionally specialized regions of the human cerebral cortex are interconnected by a dense network of cortico-cortical axonal pathways. By using diffusion spectrum imaging, we noninvasively mapped these pathways within and across cortical hemispheres in individual human participants. An analysis of the resulting large-scale structural brain networks reveals a structural core within posterior medial and parietal cerebral cortex, as well as several distinct temporal and frontal modules. Brain regions within the structural core share high degree, strength, and betweenness centrality, and they constitute connector hubs that link all major structural modules. The structural core contains brain regions that form the posterior components of the human default network. Looking both within and outside of core regions, we observed a substantial correspondence between structural connectivity and resting-state functional connectivity measured in the same participants. The spatial and topological centrality of the core within cortex suggests an important role in functional integration.