Phase transformation, oxidation and hydration of raseodymium sesquioxide

The C→A transformation of Pr2O3 has been examined. The transformation is sluggish and takes place at and above 750°C. C-Pr2O3 is oxidized at a lower temperature than the A-form and oxidation proceeds in two stages in both cases. A hydrate Pr 2O3 . H2O, formed by the interaction of C-Pr2O3 and water at relatively high temperature, is described and its behaviour compared with that of Pr(OH)3. The C-form undergoes hydration at 40°C while the A-form does not. All the observations have been explained in terms of the defect structure of C-Pr2O 3.

Ferrolysis induced soil transformation by natural drainage in Vertisols of sub-humid South India

In sub-humid South India, recent studies have shown that black soil areas (Vertisols and vertic Intergrades), located on flat valley bottoms, have been rejuvenated through the incision of streambeds, inducing changes in the pedoclimate and soil transformation. Joint pedological, geochemical and geophysical investigations were performed in order to better understand the ongoing processes and their contribution to the chemistry of local rivers. The seasonal rainfall causes cycles of oxidation and reduction in a perched watertable at the base of the black soil, while the reduced solutions are exported through a loamy sand network. This framework favours a ferrolysis process, which causes low base saturation and protonation of clay, leading to the weathering of 2:1 then 1:1 clay minerals. Maximum weathering conditions occur at the very end of the wet season, just before disappearance of the perched watertable. Therefore, the by-products of soil transformation are partially drained off and calcareous nodules, then further downslope, amorphous silica precipitate upon soil dehydration. The ferrolysed area is fringing the drainage system indicating that its development has been induced by the streambed incision. The distribution of C-14 ages of CaCO3 nodules suggests that the ferrolysis process started during the late Holocene, only about 2 kyr B.P. at the studied site and about 5 kyr B.P. at the watershed outlet. The results of this study are applied to an assessment of the physical erosion rate (4.8x10(-3) m/kyr) since the recent reactivation of the erosion process. (C) 2010 Elsevier B.V. All rights reserved.

Mechanism of crystal structure transformations. Part 3. - Factors affecting the anatase-rutile transformation

The particle size and crystallite size of anatase increase markedly in the region of the crystal structure transformation. The unit cell of anatase seems to expand prior to the transformation to rutile. This expansion has been attributed to a displacive transformation of the type defined by Buerger. Smaller particle size and larger surface area seem to favour the transformation. The kinetics of the transformation of anatase prepared by the hydrolysis of titanium sulphate have been studied at different temperatures and are found to be considerably different from the kinetics of the transformation of pure anatase. The transformation becomes immeasurably slow below ∼695 ± 10°C compared to ∼610°C for pure anatase. An induction period is observed in the transformation of anatase obtained from sulphate hydrolysis and the duration decreases with increase in temperature. The activation energy is ∼120 kcal/mole, a value higher than that for the pure anatase-rutile transformation. The results have been interpreted in terms of the relative rates of nucleation and propagation processes. The activation energy for the nucleation process seems to be much larger than for the propagation process. The kinetics of the transformation of anatase samples doped with different amounts of sulphate ion impurity have also been studied and the transformation is found to be progressively decelerated with increase in the impurity concentration. The energy of activation for the transformation appears to increase progressively with increase in impurity concentration.

Studies on the brookite-rutile transformation

Brookite, the orthorhombic modification of titanium dioxide, transforms to the tetragonal modification, rutile, on heating. The kinetics and energetics of the transformation have been studied. Below 715±10°C, the rate of transformation is extremely slow. There appears to be little or no induction time. The kinetic data can be fitted reasonably well by the first-order equation. The energy of activation is about 60 kcal/mole and the frequency factor is of the order of 1013 h-1. The entropy of activation from Eyring's theory is about -18 cal/mole deg. at 800°C. The heat of this transformation is -100±75 cal/mole. The kinetic results may be explained qualitatively in terms of various analogies but more clearly by the application of the order-disorder theory to diffusionless transformation in solids. It has been shown that the ratio of propagation rate constant to the nucleation rate constant is small and that there is little or negligible phase aggregation.

The Feminist Transformation of Bioethics : An Analysis of Theoretical Perspectives and Practical Applications in Feminist Bioethics

The purpose of this study is to examine how transformation is defining feminist bioethics and to determine the nature of this transformation. Behind the quest for transformation is core feminism and its political implications, namely, that women and other marginalized groups have been given unequal consideration in society and the sciences and that this situation is unacceptable and should be remedied. The goal of the dissertation is to determine how feminist bioethicists integrate the transformation into their respective fields and how they apply the potential of feminism to bioethical theories and practice. On a theoretical level, feminist bioethicists wish to reveal how current ways of knowing are based on inequality. Feminists pay special attention especially to communal and political contexts and to the power relations endorsed by each community. In addition, feminist bioethicists endorse relational ethics, a relational account of the self in which the interconnectedness of persons is important. On the conceptual level, feminist bioethicists work with beliefs, concepts, and practices that give us our world. As an example, I examine how feminist bioethicists have criticized and redefined the concept of autonomy. Feminist bioethicists emphasize relational autonomy, which is based on the conviction that social relationships shape moral identities and values. On the practical level, I discuss stem cell research as a test case for feminist bioethics and its ability to employ its methodologies. Analyzing these perspectives allowed me first, to compare non-feminist and feminist accounts of stem cell ethics and, second, to analyze feminist perspectives on the novel biotechnology. Along with offering a critical evaluation of the stem cell debate, the study shows that sustainable stem cell policies should be grounded on empirical knowledge about how donors perceive stem cell research and the donation process. The study indicates that feminist bioethics should develop the use of empirical bioethics, which takes the nature of ethics seriously: ethical decisions are provisional and open for further consideration. In addition, the study shows that there is another area of development in feminist bioethics: the understanding of (moral) agency. I argue that agency should be understood to mean that actions create desires.

Commercialization of sustainable energy technologies

Commercialization efforts to diffuse sustainable energy technologies (SETs1) have so far remained as the biggest challenge in the field of renewable energy and energy efficiency. Limited success of diffusion through government driven pathways urges the need for market based approaches. This paper reviews the existing state of commercialization of SETs in the backdrop of the basic theory of technology diffusion. The different SETs in India are positioned in the technology diffusion map to reflect their slow state of commercialization. The dynamics of SET market is analysed to identify the issues, barriers and stakeholders in the process of SET commercialization. By upgrading the ‘potential adopters’ to ‘techno-entrepreneurs’, the study presents the mechanisms for adopting a private sector driven ‘business model’ approach for successful diffusion of SETs. This is expected to integrate the processes of market transformation and entrepreneurship development with innovative regulatory, marketing, financing, incentive and delivery mechanisms leading to SET commercialization.

Synthesis, structure, transformation studies and catalytic properties of open-framework cadmium thiosulfate compounds

Five new thiosulfate based inorganic-organic hybrid open-framework compounds have been synthesized employing mild reaction conditions. Of the five compounds, [Na-2(H2O)(8)][Cd(C10H8N2)( S2O3)(2)]center dot 2H(2)O, I and [Cd-2(C10H8N2)(2)(HS2O3)(2)(S2O3)(2)][(C10H9N2)(2)(C10H8N2)(2)]center dot 8H(2)O, II have one-dimensional (1D) structures and [Cd(C10H8N2)(H2O)(2)(S2O3)]center dot 2H(2)O, III, [Cd-2(C10H8N2)(3)(S2O3)(2)], IV and [Cd-2(C10H8N2)(2.5)(S2O3)(2)], V have three- dimensional (3D) structures. The 1D structures are somewhat related, formed by the bonding between tetrahedral Cd centers (CdN2S2) and 4,4'-bipyridine (bpy) units. The inter-chain spaces are occupied by the hanging thiosulfate units in both the cases along with Na(H2O)(6) chains in I and free bpy units in II. The three 3D structures have one-dimensional cadmium thiosulfate chains linked by bpy units. Interpenetration has been observed in all the 3D structures. The 3D structures appear to be related and can be derived from fgs net. Transformation studies on the 1D compound, [Na-2(H2O)(8)][Cd(C10H8N2)(S2O3)(2)]center dot 2H(2)O, I, indicated a facile formation of [Cd(C10H8N2)(H2O)(2)(S2O3)]center dot 2H(2)O, III. Prolonged heating of I gave rise to a 3D cadmium sulfate phase, [Cd-2(C10H8N2)(2)(H2O)(3)(SO4)(2)]center dot 2H(2)O, VI. Compound VI has one-dimensional cadmium sulfate chains formed by six-membered rings connected by bpy units to form a 3D structure, which appears to resemble the topological arrangement of III. Transformation studies of III indicates the formation of IV and V, and at a higher temperature a new 3D cadmium sulfate, [Cd(C10H8N2)(SO4)], VII. Compound VII has a 4 x 4 grid cadmium sulfate layers pillared by bpy units. All the compounds were characterized by PXRD, TGA, IR and UV-visible studies. Preliminary studies on the possible use of the 3D compounds (III-VII) in heterogeneous cyanosilylation of imines appear to be promising.

On the use of a coordinate transformation for analysis of axisymmetric vibration of polar orthotropic annular plates

Estimates of natural frequencies corresponding to axisymmetric modes of flexural vibration of polar orthotropic annular plates have been obtained for various combinations of clamped, simply supported and free edge conditions. A coordinate transformation in the radial direction has been used to obtain effective solutions by the classical Rayleigh-Ritz method. The analysis with this transformation has been found to be advantageous in computations, particularly for large hole sizes, over direct analysis. Numerical results have been obtained for various values of hole sizes and rigidity ratio. The eigenvalue parameter has been found to vary more or less linearly with the rigidity ratio. A comparison with the results for isotropic plates has brought out some interesting features.

Growth and Convergence: The case of China

Growth and Convergence: The Case of China Since the initiation of economic reforms in 1978, China has become one of the world’s fast-growing economies. The rapid growth, however, has not been shared equally across the different regions in China. The prominent feature of substantial differences in incomes and growth rates across the different Chinese regions has attracted the attention of many researchers. This book focuses on issues related to economic growth and convergence across the Chinese regions over the past three decades. The book has eight chapters. Apart from an introduction chapter and a concluding chapter, all the other chapters each deal with some certain aspects of the central issue of regional growth and convergence across China over the past three decades. The whole book is organized as follows. Chapter 1 provides an introduction to the basic issues involved in this book. Chapter 2 tests economic growth and convergence across 31 Chinese provinces during 1981-2005, based on the theoretical framework of the Solow growth model. Chapter 3 investigates the relationship between openness to foreign economic activities, such as foreign trade and foreign direct investment, and the regional economic growth in the case of China during 1981-2005. Chapter 4, based on data of 31 Chinese provinces over the period 1980-2004, presents new evidence on the effects of structural shocks and structural transformation on growth and convergence among the Chinese regions. Chapter 5, by building up an empirical model that takes account of different potential effects of foreign direct investment, focuses on the impacts of foreign direct investment on China’s regional economic performance and growth. Chapter 6 reconsiders the growth and convergence problem of the Chinese regions in an alternative theoretical framework with endogenous saving behavior and capital mobility across regions. Chapter 7, by building up a theoretical model concerning comparative advantage and transaction efficiency, focuses on one of the potential mechanisms through which China achieves its fast economic growth over the past few decades. Chapter 8 concludes the book by summarizing the results from the previous chapters and suggesting directions for further studies.

Towards optimum diffraction efficiency for methylene blue sensitized dichromated gelatin holograms

A systematic investigation has been carried out into the optimization of diffraction efficiency (η) of methylene blue sensitized dichromated gelatin (MBDCG) holograms. The influence of the following parameters on η have been studied: prehardener concentration (CH), concentrations of ammonium dichromate (CA) and methylene blue (CM) as photosensitizers, and exposure (E). This study revealed that with CH similar, equals 0.5, CA similar, equals 30, CM similar, equals 0.3, and E similar, equals 400–600, optimum diffraction efficiency of over 80%, can be easily achieved in MBDCG holograms.