Theoretical perspectives on motorcycle training: reducing risk taking

Little past empirical support has been found for the efficacy of motorcycle rider training as a road safety countermeasure. However, it has been argued that rider training should focus more particularly on the psychosocial factors that influence risk taking behaviour in addition to the traditional practice of developing vehicle-handling skills. This paper examines how rider training to reduce risk taking could be guided by appropriate theories. Two fundamental perspectives are examined: firstly training can be considered in terms of behaviour change, and secondly in terms of adult learning. Whilst behaviour change theories assume some pre-existing level of dysfunctional behaviour, an adult learning perspective does not necessarily carry this assumption. This distinction in perspectives conceptually aligns with the notions of intervention and prevention (respectively), with possible implications for specific target groups for pre-licence and post-licence training. The application of the Theory of Reasoned Action (Ajzen & Fishbein, 1975, 1980) and Transformative Learning Theory (Mezirow, 1997) to a pre-licence rider training program in Queensland, Australia is discussed.

Measuring the effect of motorcycle rider training on psychosocial influences for risk taking

Aim: Whilst motorcycle rider training is commonly incorporated into licensing programs in many developed nations, little empirical support has been found in previous research to prescribe it as an effective road safety countermeasure. It has been posited that the lack of effect of motorcycle rider training on crash reduction may, in part, be due to the predominant focus on skills-based training with little attention devoted to addressing attitudes and motives that influence subsequent risky riding. However, little past research has actually endeavoured to measure attitudinal and motivational factors as a function of rider training. Accordingly, this study was undertaken to assess the effect of a commercial motorcycle rider training program on psychosocial factors that have been shown to influence risk taking by motorcyclists. Method: Four hundred and thirty-eight motorcycle riders attending a competency-based licence training course in Brisbane, Australia, voluntarily participated in the study. A self-report questionnaire adapted from the Rider Risk Assessment Measure (RRAM) was administered to participants at the commencement of training, then again at the conclusion of training. Participants were informed of the independent nature of the research and that their responses would in no way effect their chance of obtaining a licence. To minimise potential demand characteristics, participants were instructed to seal completed questionnaires in envelopes and place them in a sealed box accessible only by the research team (i.e. not able to be viewed by instructors). Results: Significant reductions in the propensity for thrill seeking and intentions to engage in risky riding in the next 12 months were found at the end of training. In addition, a significant increase in attitudes to safety was found. Conclusions: These findings indicate that rider training may have a positive short-term influence on riders’ propensity for risk taking. However, such findings must be interpreted with caution in regard to the subsequent safety of riders as these factors may be subject to further influence once riders are licensed and actively engage with peers during on-road riding. This highlights a challenge for road safety education / training programs in regard to the adoption of safety practices and the need for behavioural follow-up over time to ascertain long-term effects. This study was the initial phase of an ongoing program of research into rider training and risk taking framed around Theory of Planned Behaviour concepts. A subsequent 12 month follow-up of the study participants has been undertaken with data analysis pending.

Prisons, dietetic services, research and training : win win

Learning Outcome: Gain knowledge in the area of dietetic training in Australia and the benefits of collaborative partnerships between government and universities to achieve improvements in dietetic service delivery, evidenced based practice, and student placements. Prisoners have high rates of chronic disease, however dietetic services and research in this sector is limited. Securing high quality professional practice placements for dietetic training in Australia is competitive, and prisons provide exciting opportunities. Queensland University of Technology (QUT) has a unique twenty year partnership with Queensland Corrective Services (QCS) with a service learning model placing final year dietetic students within prisons. Building on this partnership, in 2007 a new joint position was funded to establish dietetic services to over 5500 prisoners and support viable best practice dietetic education. Evaluation of the past three years of this partnership has shown an expansion of QUT student placements in Queensland prisons, with a third of final year students each undertaking 120 hours of foodservice management practicum. Student evaluations of placement over this period are much higher than the University average. Through the joint position student projects have been targeted on strategic areas to support nutrition and dietetic policy and practice. Projects have been broadened from menu reviews to more comprehensive quality improvement and dietetic research activities, with all student learning activities transferrable to other foodservice settings. Student practice in the prisons has been extended beyond foodservice management to include group education and dietetic counseling. For QCS, student placements have equated to close to a full-time dietitian position, with nutrition policy now being implemented as an outcome of this support. This innovative partnership has achieved a sustainable student placement model, supported research, whilst delivering dietetic services to a difficult to access group. Funding Disclosure: None

Ageing of people with an intellectual disability: Effective training for frontline workers

While the attainment of late life represents a significant achievement for people with an intellectual disability, increased life expectancy has resulted in growing concerns about the extent to which disability service providers are ready to meet the changing needs of increasing numbers of older people and facilitate their ongoing social inclusion. Training of frontline disability staff is widely accepted as an effective strategy for increasing organisational capacity to contribute to improved quality of life for people with an intellectual disability. The study identifies training needs analyses and 'ready-to-deliver' training programs for frontline disability services staff working with adults with an intellectual disability who are ageing, assesses whether the training programs contribute to improved quality of life outcomes for service users, and makes recommendations for future research and development of training for disability services staff who work with older people with intellectual disability.

Education and training of medical physicists in south East Asia: Accomplishments and challenges

John Cameron has made significant contributions to the field of Medical Physics. His contributions encompassed research and development, technical developments and education. He had a particular interest in the education of medical physicists in developing countries. Structured clinical training is also an essential component of the professional development of a medical physicist. This paper considers aspects of the clinical training and education of medical physicists in South-East Asia and the challenges facing the profession in the region if it is to keep pace with the rapid increase in the amount and technical complexity of medical physics infrastructure in the region.

The impact of English as a Foreign Language (EFL) listening comprehension through first language (L1) listening strategy training

Listening is the basic and complementary skill in second language learning. The term listening is used in language teaching to refer to a complex process that allows us to understand spoken language. Listening, the most widely used language skill, is often used in conjunction with the other skills of speaking, reading and writing. Listening is not only a skill area in primary language performance (L1), but is also a critical means of acquiring a second language (L2). Listening is the channel in which we process language in real time – employing pacing, units of encoding and decoding (the 2 processes are central to interpretation and meaning making) and pausing (allows for reflection) that are unique to spoken language. Despite the wide range of areas investigated in listening strategies during training, there is a lack of research looking specifically at how effectively L1 listening strategy training may transfer to L2. To investigate the development of any such transfer patterns the instructional design and implementation of listening strategy of L1 will be critical.

Shear strength of hollow flange channel beams with stiffened web openings

This LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. The LSBs are commonly used as floor joists and bearers with web openings in buildings. Their shear strengths are considerably reduced when web openings are included for the purpose of locating building services. Shear tests of LSBs with web openings have shown that there is up to 60% reduction in the shear capacity. Hence there is a need to improve the shear capacity of LSBs with web openings. A cost effective way to eliminate the shear capacity reduction is to stiffen the web openings using suitable stiffeners. Hence numerical studies were undertaken to investigate the shear capacity of LSBs with stiffened web openings. In this research, finite element models of LSBs with stiffened web openings in shear were developed to simulate the shear behaviour and strength of LSBs. Various stiffening methods using plate and LSB stiffeners attached to LSBs using both welding and screw-fastening were attempted. The developed models were then validated by comparing their results with experimental results and used in further studies. Both finite element and experimental results showed that the stiffening arrangements recommended by past research for cold-formed steel channel beams are not adequate to restore the shear strengths of LSBs with web openings. Therefore new stiffener arrangements were proposed for LSBs with web openings. This paper presents the details of this research project using numerical studies and the results.

Characterisation of flexural bond strength in thin bed concrete masonry

This paper presents an experimental investigation of the flexural bond strength of thin bed concrete masonry. Flexural bond strength of masonry depends upon the mortar type, the techniques of dispersion of mortar and the surface texture (roughness) of concrete blocks. There exists an abundance of literature on the conventional masonry bond containing 10mm thick mortar; however, the 2mm polymer flue mortar bond is not yet well researched. This paper reports a study on the examination of the effect of mortar compositions, dispersion methods and unit surface textures to the flexural bond strength of thin bed concrete masonry. Three types of polymer modified glue mortars, three surface textures and four techniques of mortar dispersion have been used in preparing 108 four point flexural test specimens. All mortar joints have been carefully prepared to ensure achievement of 2mm layer polymer mortar thickness on average. The results exhibit the flexural bond strength of thin bed concrete masonry much is higher than that of the conventional masonry; moreover the unit surface texture and the mortar dispersion methods are found to have significant influence on the flexural bond strength.