Cárie dentária e necessidades de tratamento em adolescentes paulistas

OBJETIVO: Estimar a prevalência de cárie dentária e necessidades de tratamento em crianças de 12 anos e adolescentes. MÉTODOS: Estudo transversal com base nos resultados dos levantamentos epidemiológicos Condições de Saúde Bucal no Estado de São Paulo em 2002 e Pesquisa Nacional de Saúde Bucal (SBBrasil) 2010. Foram analisados os dados secundários de 5.782 crianças (2002) de 12 anos e outras 369 (2010); e para a faixa de 15 a 19 anos foram analisados 880 jovens (2002) e 300 jovens em 2010. A experiência de cárie foi avaliada pelo índice CPOD (dentes cariados, perdidos e obturados) e foram verificadas as necessidades de tratamento odontológico segundo os critérios propostos pela Organização Mundial da Saúde. O índice Significant Caries Index foi empregado para medir a severidade da cárie no terço do grupo que apresentou maior prevalência da doença. Para a análise dos resultados utilizaram-se os testes de Qui-quadrado e Mann-Whitney, com nível de 5% de significância. RESULTADOS: Houve diminuição de 39,3 pontos percentuais no índice CPOD aos 12 anos (p < 0,001) e de 41,1 pontos percentuais nos adolescentes (p < 0,001) entre 2002 e 2010, e aumento de aproximadamente 161,0 pontos percentuais e 303,0 pontos percentuais no grupo livres de cárie, respectivamente. A porcentagem de dentes restaurados diminuiu nos dois grupos etários, mas a prevalência de dentes cariados não se alterou para o grupo de alta experiência de cárie. No grupo de baixa experiência de cárie ocorreu diminuição do componente perdido para os adolescentes e aumento do componente cariado aos 12 anos e adolescentes. Houve aumento da necessidade de tratamento endodôntico no grupo total e no de alta experiência de cárie aos 12 anos; e entre os adolescentes a necessidade de restauração de duas ou mais faces diminuiu no grupo todo e também no de baixa experiência. CONCLUSÕES: A diminuição da necessidade de tratamento de baixa complexidade entre adolescentes sugere que as ações de promoção e prevenção estão afetando positivamente esse grupo. Além disso, os dois levantamentos epidemiológicos no estado de São Paulo mostram melhorias na condição de saúde bucal dos grupos etários estudados e que se faz necessário o monitoramento direcionado também para o grupo de baixa experiência de cárie.

Construção e utilização de equipamentos de baixo custo para ensino de Física

Experimental work has been taking a great importance in Science curricula in several countries. This fact is now changing the conception of the role of the laboratory in the classroom. This role no longer seen as an instrument to illustrate or confirm some concepts but became the essential place of the learning process in Science. However, the implementation of several experimental procedures frequently faces equipment limitations, whether because those indicated in textbooks do not exist in schools due to prohibitive costs for most school budgets, or because their use is far too complex to be done by students. In this dissertation, a few examples of experimental equipment, made with day-today supplies is analyzed, as well as those that can be acquired at low prices and might have high positive effect in the Science learning process. We also discuss some relevant equipment in the teaching of Physics that can be created by teachers and students in schools, as part of curricular or non curricular subject areas such as “Área de Projecto” in the twelfth grade. These equipments, easy to conceive and produce with reasonable costs resources, when compared to the commercial equipment, which are much more expensive, presents very good experimental results.

Radiographers practice concerning breast compression in mammography: gradual versus no gradual

Purpose: Evaluate the type of breast compression (gradual or no gradual) that provides less discomfort to the patient. Methods and Materials: The standard projections were simulated [craniocaudal/(CC) and mediolateral-oblique/(MLO)] with the two breast compressions in 90 volunteers women aged between 19 and 86. The women were organised in groups according to the breast density. The intensity of discomfort was evaluated using the scale that have represented several faces (0-10) proposed by Wong Baker in the end of each simulation. It was also applied an interview using focus group to debate the score that were attributed during pain evaluation and to identify the criteria that were considered to do the classification. Results: The women aged between 19-29y (with higher breast density) classified the pain during no gradual compression as 4 and the gradual compression as 2 for both projections. The MLO projection was considered the most uncomfortable. During the focus group interview applied to this group was highlighted that compression did not promoted pain but discomfort. They considered that the high expectations of pain did not correspond to the discomfort that they felt. Similar results were identified for the older women (30-50y; > 50y). Conclusion: The radiographers should considerer the technique for breast compression. The gradual compression was considered for the majority of the women as the most comfortable regardless of breast density. The MLO projection was considered as uncomfortable due to the positioning (axila and inclusion of pectoral muscle) and due to the higher breast compression compared to the CC projection.

Numerical and experimental study of tensile strength of single and double-strap repairs

Adhesive bonding as a joining or repair method has a wide application in many industries. Repairs with bonded patches are often carried out to re-establish the stiffness at critical regions or spots of corrosion and/or fatigue cracks. Single and double-strap repairs (SS and DS, respectively) are a viable option for repairing. For the SS repairs, a patch is adhesively-bonded on one of the structure faces. SS repairs are easy to execute, but the load eccentricity leads to peel peak stresses at the overlap edges. DS repairs involve the use of two patches, one on each face of the structure. These are more efficient than SS repairs, due to the doubling of the bonding area and suppression of the transverse deflection of the adherends. Shear stresses also become more uniform as a result of smaller differential straining. The experimental and Finite Element (FE) study presented here for strength prediction and design optimization of bonded repairs includes SS and DS solutions with different values of overlap length (LO). The examined values of LO include 10, 20 and 30 mm. The failure strengths of the SS and DS repairs were compared with FE results by using the Abaqus® FE software. A Cohesive Zone Model (CZM) with a triangular shape in pure tensile and shear modes, including the mixed-mode possibility for crack growth, was used to simulate fracture of the adhesive layer. A good agreement was found between the experiments and the FE simulations on the failure modes, elastic stiffness and strength of the repairs, showing the effectiveness and applicability of the proposed FE technique in predicting strength of bonded repairs. Furthermore, some optimization principles were proposed to repair structures with adhesively-bonded patches that will allow repair designers to effectively design bonded repairs.

Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches

In this work, a repair technique with adhesively bonded carbon-epoxy patches is proposed for wood members damaged by horizontal shear and under bending loads. This damage is characterized by horizontal crack growth near the neutral plane of the wood beam, normally originating from checks and shakes. The repair consists of adhesively bonded carbon-epoxy patches on the vertical side faces of the beam at the cracked region to block sliding between the beam arms. An experimental and numerical parametric analysis was performed on the patch length. The numerical analysis used the finite element method (FEM) and cohesive zone models (CZMs), with an inverse modelling technique for the characterization of the adhesive layer. Trapezoidal cohesive laws in each pure mode were used to account for the ductility of the adhesive used. To fully reproduce the tests, horizontal damage propagation within the wood beam was also simulated. A good correlation with the experiments was found. Regarding the effectiveness of the repair, for the conditions selected for this work, a full strength recovery was achieved for the bigger value of patch length tested.

Paula Moura Pinheiro

Faces de Eva, N.º 19, p.p.119-127

Isabel Alçada

Faces de Eva, N.º 19,(2008), p.p.139-145

Simone Schmidt

Faces de Eva, N.º 21,(2008), p.p.223-230

Formação de alunos histórica e geograficamente competentes no ensino básico - contributo das imagens e dos mapas mentais

Relatório de investigação apresentado à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ensino de 1º e 2º ciclo do Ensino Básico

Como escrever um filme de Ficção Científica, das teorias da narrativa ao género

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Audiovisual e Multimédia.

Aplicação do conceito de gestão de ativos físicos numa estação elevatória de águas

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Projecto de parceria entre a ONGD Estímulo e a Rede de Farmácias Portuguesas: a união de esforços entre sectores para a resolução de problemas contemporâneos

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Gestão Estratégica das Relações Públicas.

Meta-analysis of gender and science research - Country report - Portugal

In Portugal, especially starting in the 1970s, women’s studies had implications on the emergency of the concept of gender and the feminist criticism to the prevailing models about differences between sexes. Until then, women had been absent from scientific research both as subject and as object. Feminism brought more reflexivity to the scientific thinking. After the 25th of April 1974, because of the consequent political openness, several innovating themes of research emerged, together with new concepts and fields of study. However, as far as gender and science relationship is concerned, such studies especially concentrate on higher education institutions. The feminist thinking seems to have two main objectives: to give women visibility, on the one hand, and to denunciate men’s domain in the several fields of knowledge. In 1977, the “Feminine Commission” is created and since then it has been publishing studies on women’s condition and contributing to the enhancement of the reflection of female condition at all levels. In the 1980s, the growing feminisation of tertiary education (both of students and academics), favoured the development of women’s studies, especially on their condition within universities with a special focus on the glass ceiling, despite the lack of statistical data by gender, thus making difficult the analysis of women integration in several sectors, namely in educational and scientific research activities. Other agglutinating themes are family, social and legal condition, work, education, and feminine intervention on political and social movements. In the 1990s, Women Studies are institutionalised in the academic context with the creation of the first Master in Women Studies in the Universidade Aberta (Open University), in Lisbon. In 1999, the first Portuguese journal of women studies is created – “Faces de Eva”. Seminars, conferences, thesis, journals, and projects on women’s studies are more and more common. However, results and publications are not so divulgated as they should be, because of lack of comprehensive and coordinated databases. 2. Analysis by topics 2.1. Horizontal and vertical segregation Research questions It is one of the main areas of research in Portugal. Essentially two issues have been considered: - The analysis of vertical gender segregation in educational and professional fields, having reflexes on women professional career progression with special attention to men’s power in control positions and the glass ceiling. - The analysis of horizontal segregation, special in higher education (teaching and research) where women have less visibility than men, and the under-representation of women in technology and technological careers. Research in this area mainly focuses on description, showing the under-representation of women in certain scientific areas and senior positions. Nevertheless, the studies that analyze horizontal segregation in the field of education adopt a more analytical approach which focuses on the analysis of the mechanisms of reproduction of gender stereotypes, especially socialisation, influencing educational and career choices. 1

TV Recommendation and Personalization Systems: Integrating Broadcast and Video On-demand Services

he expansion of Digital Television and the convergence between conventional broadcasting and television over IP contributed to the gradual increase of the number of available channels and on demand video content. Moreover, the dissemination of the use of mobile devices like laptops, smartphones and tablets on everyday activities resulted in a shift of the traditional television viewing paradigm from the couch to everywhere, anytime from any device. Although this new scenario enables a great improvement in viewing experiences, it also brings new challenges given the overload of information that the viewer faces. Recommendation systems stand out as a possible solution to help a watcher on the selection of the content that best fits his/her preferences. This paper describes a web based system that helps the user navigating on broadcasted and online television content by implementing recommendations based on collaborative and content based filtering. The algorithms developed estimate the similarity between items and users and predict the rating that a user would assign to a particular item (television program, movie, etc.). To enable interoperability between different systems, programs characteristics (title, genre, actors, etc.) are stored according to the TV-Anytime standard. The set of recommendations produced are presented through a Web Application that allows the user to interact with the system based on the obtained recommendations.