A two-phase composite in simple shear: Effective mechanical anisotropy development and localization potential

We present a combined shape and mechanical anisotropy evolution model for a two-phase inclusion-bearing rock subject to large deformation. A single elliptical inclusion embedded in a homogeneous but anisotropic matrix is used to represent a simplified shape evolution enforced on all inclusions. The mechanical anisotropy develops due to the alignment of elongated inclusions. The effective anisotropy is quantified using the differential effective medium (DEM) approach. The model can be run for any deformation path and an arbitrary viscosity ratio between the inclusion and host phase. We focus on the case of simple shear and weak inclusions. The shape evolution of the representative inclusion is largely insensitive to the anisotropy development and to parameter variations in the studied range. An initial hardening stage is observed up to a shear strain of gamma = 1 irrespective of the inclusion fraction. The hardening is followed by a softening stage related to the developing anisotropy and its progressive rotation toward the shear direction. The traction needed to maintain a constant shear rate exhibits a fivefold drop at gamma = 5 in the limiting case of an inviscid inclusion. Numerical simulations show that our analytical model provides a good approximation to the actual evolution of a two-phase inclusion-host composite. However, the inclusions develop complex sigmoidal shapes resulting in the formation of an S-C fabric. We attribute the observed drop in the effective normal viscosity to this structural development. We study the localization potential in a rock column bearing varying fraction of inclusions. In the inviscid inclusion case, a strain jump from gamma = 3 to gamma = 100 is observed for a change of the inclusion fraction from 20% to 33%.

Atomic force microscopy: probing the nanoworld

Atomic Force Microscope and related techniques have played a key role in the development of the nanotechnology revolution that is taking place in science. This paper reviews the basic principles behind the technique and its different operation modes and applications, pointing out research worksperformed in the Nanometric Techniques Unit of the CCiTUB in order to exemplify the vast array of capabilities of these instruments.

Inhibition in early Alzheimer's disease: an fMRI-based study of effective connectivity.

Changes of functional connectivity in prodromal and early Alzheimer's disease can arise from compensatory and/or pathological processes. We hypothesized that i) there is impairment of effective inhibition associated with early Alzheimer's disease that may lead to ii) a paradoxical increase of functional connectivity. To this end we analyzed effective connectivity in 14 patients and 16 matched controls using dynamic causal modeling of functional MRI time series recorded during a visual inter-hemispheric integration task. By contrasting co-linear with non co-linear bilateral gratings, we estimated inhibitory top-down effects within the visual areas. The anatomical areas constituting the functional network of interest were identified with categorical functional MRI contrasts (Stimuli>Baseline and Co-linear gratings>Non co-linear gratings), which implicated V1 and V3v in both hemispheres. A model with reciprocal excitatory intrinsic connections linking these four regions and modulatory inhibitory effects exerted by V3v on V1 optimally explained the functional MRI time series in both subject groups. However, Alzheimer's disease was associated with significantly weakened intrinsic and modulatory connections. Top-down inhibitory effects, previously detected as relative deactivations of V1 in young adults, were observed neither in our aged controls nor in patients. We conclude that effective inhibition weakens with age and more so in early Alzheimer's disease.

Electric dipole polarizability in 208Pb: insights from the droplet model

We study the electric dipole polarizability α D in 208 Pb based on the predictions of a large and representative set of relativistic and nonrelativistic nuclear mean-field models. We adopt the droplet model as a guide to better understand the correlations between α D and other isovector observables. Insights from the droplet model suggest that the product of α D and the nuclear symmetry energy at saturation density J is much better correlated with the neutron skin thickness r np of 208 Pb than the polarizability alone. Correlations of α D J with r np and with the symmetry energy slope parameter L suggest that α D J is a strong isovector indicator. Hence, we explore the possibility of constraining the isovector sector of the nuclear energy density functional by comparing our theoretical predictions against measurements of both α D and the parity-violating asymmetry in 208 Pb. We find that the recent experimental determination of α D in 208 Pb in combination with the range for the symmetry energy at saturation density J = [31 ± (2) est] MeV suggests r np (208 Pb) = 0 . 165 ± (0 . 009) expt ± (0 . 013) theor ± (0.021) est fm and L = 43 ± (6) expt ± (8) theor ± (12) est MeV

From evidence to clinical practice: effective implementation of therapeutic hypothermia to improve patient outcome after cardiac arrest.

OBJECTIVES: Therapeutic hypothermia has been recommended for postcardiac arrest coma due to ventricular fibrillation. However, no studies have evaluated whether therapeutic hypothermia could be effectively implemented in intensive care practice and whether it would improve the outcome of all comatose patients with cardiac arrest, including those with shock or with cardiac arrest due to nonventricular fibrillation rhythms. DESIGN: Retrospective study. SETTING: Fourteen-bed medical intensive care unit in a university hospital. PATIENTS: Patients were 109 comatose patients with out-of-hospital cardiac arrest due to ventricular fibrillation and nonventricular fibrillation rhythms (asystole/pulseless electrical activity). INTERVENTIONS: We analyzed 55 consecutive patients (June 2002 to December 2004) treated with therapeutic hypothermia (to a central target temperature of 33 degrees C, using external cooling). Fifty-four consecutive patients (June 1999 to May 2002) treated with standard resuscitation served as controls. Efficacy, safety, and outcome at hospital discharge were assessed. Good outcome was defined as Glasgow-Pittsburgh Cerebral Performance category 1 or 2. MEASUREMENTS AND MAIN RESULTS: In patients treated with therapeutic hypothermia, the median time to reach the target temperature was 5 hrs, with a progressive reduction over the 18 months of data collection. Therapeutic hypothermia had a major positive impact on the outcome of patients with cardiac arrest due to ventricular fibrillation (good outcome in 24 of 43 patients [55.8%] of the therapeutic hypothermia group vs. 11 of 43 patients [25.6%] of the standard resuscitation group, p = .004). The benefit of therapeutic hypothermia was also maintained in patients with shock (good outcome in five of 17 patients of the therapeutic hypothermia group vs. zero of 14 of the standard resuscitation group, p = .027). The outcome after cardiac arrest due to nonventricular fibrillation rhythms was poor and did not differ significantly between the two groups. Therapeutic hypothermia was of particular benefit in patients with short duration of cardiac arrest (<30 mins). CONCLUSIONS: Therapeutic hypothermia for the treatment of postcardiac arrest coma can be successfully implemented in intensive care practice with a major benefit on patient outcome, which appeared to be related to the type and the duration of initial cardiac arrest and seemed maintained in patients with shock.

The Iowa plan for atomic energy education, 1950

This is volume 1 of 5 and is the Iowa Plan for Atomic Energy Education. It is the orientation to the Iowa plan for atomic energy education. This plan was presented to teachers, students and the lay public of Iowa with the desire to remove fears and assist in pointing the way toward a sensitive consideration of what American citizens can and should know and do about atomic energy.

Cost-effective measures for diffuse load abatement in forestry

Abstract

Sustained 24-hour blockade of the renin-angiotensin system: a high dose of a long-acting blocker is as effective as a lower dose combined with an angiotensin-converting enzyme inhibitor

Résumé en français Jusqu'alors, il n'avait jamais été formellement démontré qu'une forte dose d'un antagoniste de l'angiotensine II à longue durée d'action pouvait être aussi efficace sur le blocage du système rénine-angiotensine que l'association d'un inhibiteur de l'enzyme de conversion avec le même antagoniste de l'angiotensine II à des doses plus faibles. Dans cette étude randomisée en double aveugle, nous avons étudié le blocage du système rénine-angiotensine obtenu avec trois doses d'olmesartan medoxomil (20, 40 et 80 mg) chez 30 volontaires sains que nous avons comparé au blocage obtenu par du lisinopril (20 mg), seul ou associé à de l'olmesartan medoxomil (20 et 40 mg). L'étude s'est déroulée en deux phases selon un design par crossover. A deux reprises, chaque volontaire à reçu durant une semaine l'un des six traitements possibles. Un intervalle d'une semaine a été respecté entre les deux phases (période de washout). L'objectif principal était d'étudier, 24 heures après la dernière dose, le blocage de l'élévation de la pression systolique en réponse à l'administration d'angiotensine I. Ce blocage était de 58% ± 19% (moyenne ± déviation standard) avec 20 mg de lisinopril, de 58% ± 11% avec 20 mg d'olmesartan medoxomil, de 62% ± 16% avec 40 mg d'olmesartan medoxomil, et de 76% ± 12% avec la plus forte dose d'olmesartan medoxomil (80 mg) (P=.016 versus 20 mg de lisinopril et P=.0015 versus 20 mg d'olmesartan medoxomil). Le blocage était de 80% ± 22% avec 20 mg de lisinopril associé à 20 mg d'olmesartan medoxomil et de 83% ± 9% avec 20 mg de lisinopril associé à 40 mg d'olmesartan medoxomil (P= .3 versus 80 mg d'olmesartan medoxomil). Ces résultats montrent, que chez les volontaires sains, une dose suffisamment élevée d'olmesartan medoxomil peut induire un blocage à 24 heures quasi complet de l'élévation de la pression artérielle en réponse à l'administration d'angiotensine I. De même, en terme de blocage de l'effet vasculaire de l'angiotensine I, une dose suffisamment élevée d'un antagoniste de l'angiotensine II de longue durée d'action est tout aussi efficace que ce même antagoniste à des doses plus faibles associé avec à un inhibiteur de l'enzyme de conversion.

Fuzzy logic algorithm to extract specific interaction forces from atomic force microscopy data

The atomic force microscope is not only a very convenient tool for studying the topography of different samples, but it can also be used to measure specific binding forces between molecules. For this purpose, one type of molecule is attached to the tip and the other one to the substrate. Approaching the tip to the substrate allows the molecules to bind together. Retracting the tip breaks the newly formed bond. The rupture of a specific bond appears in the force-distance curves as a spike from which the binding force can be deduced. In this article we present an algorithm to automatically process force-distance curves in order to obtain bond strength histograms. The algorithm is based on a fuzzy logic approach that permits an evaluation of "quality" for every event and makes the detection procedure much faster compared to a manual selection. In this article, the software has been applied to measure the binding strength between tubuline and microtubuline associated proteins.

Screening of Bacillus thuringiensis strains effective against mosquitoes

The objective of this work was to evaluate 210 Bacillus thuringiensis strains against Aedes aegypti and Culex quinquefasciatus larvae to select the most effective. These strains were isolated from different regions of Brazil and are stored in a Bacillus spp. collection at Embrapa Recursos Genéticos e Biotecnologia, Brasília, Brazil. The selected strains were characterized by morphological (microscopy), biochemical (SDS-PAGE 10%) and molecular (PCR) methods. Six B. thuringiensis strains were identified as mosquito-toxic after the selective bioassays. None of the strains produced the expected PCR products for detection of cry4, cry11 and cyt1A genes. These results indicate that the activity of mosquitocidal Brazilian strains are not related with Cry4, Cry11 or Cyt proteins, so they could be used as an alternative bioinsecticide against mosquitoes.

Constraints on effective field theory parameters for the Lambda N -> NN transition

The relation between the low-energy constants appearing in the effective field theory description of the Lambda N -> NN transition potential and the parameters of the one-meson-exchange model previously developed is obtained. We extract the relative importance of the different exchange mechanisms included in the meson picture by means of a comparison to the corresponding operational structures appearing in the effective approach. The ability of this procedure to obtain the weak baryon-baryon-meson couplings for a possible scalar exchange is also discussed.

Constraints on effective field theory parameters for the Lambda N -> NN transition

The relation between the low-energy constants appearing in the effective field theory description of the Lambda N -> NN transition potential and the parameters of the one-meson-exchange model previously developed is obtained. We extract the relative importance of the different exchange mechanisms included in the meson picture by means of a comparison to the corresponding operational structures appearing in the effective approach. The ability of this procedure to obtain the weak baryon-baryon-meson couplings for a possible scalar exchange is also discussed.

Stiffness tomography by atomic force microscopy.

The atomic force microscope is a convenient tool to probe living samples at the nanometric scale. Among its numerous capabilities, the instrument can be operated as a nano-indenter to gather information about the mechanical properties of the sample. In this operating mode, the deformation of the cantilever is displayed as a function of the indentation depth of the tip into the sample. Fitting this curve with different theoretical models permits us to estimate the Young's modulus of the sample at the indentation spot. We describe what to our knowledge is a new technique to process these curves to distinguish structures of different stiffness buried into the bulk of the sample. The working principle of this new imaging technique has been verified by finite element models and successfully applied to living cells.