Simultaneous measurement of temperature and external refractive index by use of a hybrid grating in D fiber with enhanced sensitivity by HF etching

We propose a dual-parameter optical sensor device achieved by UV inscription of a hybrid long-period grating-fiber Bragg grating structure in D fiber. The hybrid configuration permits the detection of the temperature from the latter's response and measurement of the external refractive index from the former's response. In addition, the host D fiber permits effective modification of the device's sensitivity by cladding etching. The grating sensor has been used to measure the concentrations of aqueous sugar solutions, demonstrating its potential capability to detect concentration changes as small as 0.01%.

Slow-phase onset influence on waveform identification and foveation time measure in congenital nystagmus

Congenital nystagmus (CN) is an ocular-motor disorder characterised by involuntary, conjugated ocular oscillations and its pathogenesis is still under investigation. This kind of nystagmus is termed congenital (or infantile) since it could be present at birth or it can arise in the first months of life. Most of CN patients show a considerable decrease of their visual acuity: image fixation on the retina is disturbed by nystagmus continuous oscillations, mainly horizontal. However, the image of a given target can still be stable during short periods in which eye velocity slows down while the target image is placed onto the fovea (called foveation intervals). To quantify the extent of nystagmus, eye movement recording are routinely employed, allowing physicians to extract and analyse nystagmus main features such as waveform shape, amplitude and frequency. Using eye movement recording, it is also possible to compute estimated visual acuity predictors: analytical functions which estimates expected visual acuity using signal features such as foveation time and foveation position variability. Use of those functions extend the information from typical visual acuity measurement (e.g. Landolt C test) and could be a support for therapy planning or monitoring. This study focuses on detection of CN patients' waveform type and on foveation time measure. Specifically, it proposes a robust method to recognize cycles corresponding to the specific CN waveform in the eye movement pattern and, for those cycles, evaluate the exact signal tracts in which a subject foveates. About 40 eyemovement recordings, either infrared-oculographic or electrooculographic, were acquired from 16 CN subjects. Results suggest that the use of an adaptive threshold applied to the eye velocity signal could improve the estimation of slow phase start point. This can enhance foveation time computing and reduce influence of repositioning saccades and data noise on the waveform type identification.

Detection of foveation windows and analysis of foveation sequences in congenital nystagmus

Congenital nystagmus (CN) is an ocular-motor disorder characterised by involuntary, conjugated ocular oscillations, that can arise since the first months of life. Pathogenesis of congenital nystagmus is still under investigation. In general, CN patients show a considerable decrease of their visual acuity: image fixation on the retina is disturbed by nystagmus continuous oscillations, mainly horizontal. However, image stabilisation is still achieved during the short periods in which eye velocity slows down while the target image is placed onto the fovea (called foveation intervals). To quantify the extent of nystagmus, eye movement recording are routinely employed, allowing physicians to extract and analyse nystagmus main features such as shape, amplitude and frequency. Using eye movement recording, it is also possible to compute estimated visual acuity predictors: analytical functions which estimates expected visual acuity using signal features such as foveation time and foveation position variability. Use of those functions add information to typical visual acuity measurement (e.g. Landolt C test) and could be a support for therapy planning or monitoring. This study focus on robust detection of CN patients' foveations. Specifically, it proposes a method to recognize the exact signal tracts in which a subject foveates, This paper also analyses foveation sequences. About 50 eyemovement recordings, either infrared-oculographic or electrooculographic, from different CN subjects were acquired. Results suggest that an exponential interpolation for the slow phases of nystagmus could improve foveation time computing and reduce influence of breaking saccades and data noise. Moreover a concise description of foveation sequence variability can be achieved using non-fitting splines. © 2009 Springer Berlin Heidelberg.

Comparison of the measurement performance of high precision multi-axis metal cutting machine tools

High precision manufacturers continuously seek out disruptive technologies to improve the quality, cost, and delivery of their products. With the advancement of machine tool and measurement technology many companies are ready to capitalise on the opportunity of on-machine measurement (OMM). Coupled with business case, manufacturing engineers are now questioning whether OMM can soon eliminate the need for post-process inspection systems. Metrologists will however argue that the machining environment is too hostile and that there are numerous process variables which need consideration before traceable measurement on-the-machine can be achieved. In this paper we test the measurement capability of five new multi-axis machine tools enabled as OMM systems via on-machine probing. All systems are tested under various operating conditions in order to better understand the effects of potentially significant variables. This investigation has found that key process variables such as machine tool warm-up and tool-change cycles can have an effect on machine tool measurement repeatability. New data presented here is important to many manufacturers whom are considering utilising their high precision multi-axis machine tools for both the creation and verification of their products.

Uncertainty evaluation of an axi-symmetric measurement machine

This paper describes a method of uncertainty evaluation for axi-symmetric measurement machines which is compliant with GUM and PUMA methodologies. Specialized measuring machines for the inspection of axisymmetric components enable the measurement of properties such as roundness (radial runout), axial runout and coning. These machines typically consist of a rotary table and a number of contact measurement probes located on slideways. Sources of uncertainty include the probe calibration process, probe repeatability, probe alignment, geometric errors in the rotary table, the dimensional stability of the structure holding the probes and form errors in the reference hemisphere which is used to calibrate the system. The generic method is described and an evaluation of an industrial machine is described as a worked example. Type A uncertainties were obtained from a repeatability study of the probe calibration process, a repeatability study of the actual measurement process, a system stability test and an elastic deformation test. Type B uncertainties were obtained from calibration certificates and estimates. Expanded uncertainties, at 95% confidence, were then calculated for the measurement of; radial runout (1.2 µm with a plunger probe or 1.7 µm with a lever probe); axial runout (1.2 µm with a plunger probe or 1.5 µm with a lever probe); and coning/swash (0.44 arc seconds with a plunger probe or 0.60 arc seconds with a lever probe).

A Test of Association between Qualitative Trait and a Set of SNPs

2000 Mathematics Subject Classification: 62P10, 92D10, 92D30, 62F03

Cross-cultural confirmatory factor analysis of the CES-D in Spanish and Mexican dementia caregivers

The Center for Epidemiologic Studies-Depression Scale (CES-D) is the most frequently used scale for measuring depressive symptomatology in caregiving research. The aim of this study is to test its construct structure and measurement equivalence between caregivers from two Spanish-speaking countries. Face-to-face interviews were carried out with 595 female dementia caregivers from Madrid, Spain, and from Coahuila, Mexico. The structure of the CES-D was analyzed using exploratory and confirmatory factor analysis (EFA and CFA, respectively). Measurement invariance across samples was analyzed comparing a baseline model with a more restrictive model. Significant differences between means were found for 7 items. The results of the EFA clearly supported a four-factor solution. The CFA for the whole sample with the four factors revealed high and statistically significant loading coefficients for all items (except item number 4). When equality constraints were imposed to test for the invariance between countries, the change in chi-square was significant, indicating that complete invariance could not be assumed. Significant between-countries differences were found for three of the four latent factor mean scores. Although the results provide general support for the original four-factor structure, caution should be exercised on reporting comparisons of depression scores between Spanish-speaking countries.

VLSI testing and characterization system for micro electro-mechanical (MEM) sensors

The purpose of this investigation was to develop and implement a general purpose VLSI (Very Large Scale Integration) Test Module based on a FPGA (Field Programmable Gate Array) system to verify the mechanical behavior and performance of MEM sensors, with associated corrective capabilities; and to make use of the evolving System-C, a new open-source HDL (Hardware Description Language), for the design of the FPGA functional units. System-C is becoming widely accepted as a platform for modeling, simulating and implementing systems consisting of both hardware and software components. In this investigation, a Dual-Axis Accelerometer (ADXL202E) and a Temperature Sensor (TMP03) were used for the test module verification. Results of the test module measurement were analyzed for repeatability and reliability, and then compared to the sensor datasheet. Further study ideas were identified based on the study and results analysis. ASIC (Application Specific Integrated Circuit) design concepts were also being pursued.

The Emotional Intelligence of National Automatic Merchandising Association (NAMA) Vending and Coffee Services Industries Executives: A Pilot Study

The authors report the pilot study focused on identifying the emotional intelligence (El) of leaders in the automatic merchandising and coffee service industries. The data were collected from 39 executives, members of National Automatic Merchandising Association (NM), who attended 2005 Executive Development Program on the campus of Michigan State University. Three elements of EI- IN, OUT, RELATIONSHIP for these leaders are discussed.

The relationship of aptitude, course grades, and program length, to performance on a standards based test (NCLEX -RN)

The purpose of this study was threefold: first, to investigate variables associated with learning, and performance as measured by the National Council Licensure Examination for Registered Nurses (NCLEX-RN). The second purpose was to validate the predictive value of the Assessment Technologies Institute (ATI) achievement exit exam, and lastly, to provide a model that could be used to predict performance on the NCLEX-RN, with implications for admission and curriculum development. The study was based on school learning theory, which implies that acquisition in school learning is a function of aptitude (pre-admission measures), opportunity to learn, and quality of instruction (program measures). Data utilized were from 298 graduates of an associate degree nursing program in the Southeastern United States. Of the 298 graduates, 142 were Hispanic, 87 were Black, non-Hispanic, 54 White, non-Hispanic, and 15 reported as Others. The graduates took the NCLEX-RN for the first time during the years 2003–2005. This study was a predictive, correlational design that relied upon retrospective data. Point biserial correlations, and chi-square analyses were used to investigate relationships between 19 selected predictor variables and the dichotomous criterion variable, NCLEX-RN. The correlation and chi square findings indicated that men did better on the NCLEX-RN than women; Blacks had the highest failure rates, followed by Hispanics; older students were more likely to pass the exam than younger students; and students who passed the exam started and completed the nursing program with a higher grade point average, than those who failed the exam. Using logistic regression, five statistical models that used variables associated with learning and student performance on the NCLEX-RN were tested with a model adapted from Bloom's (1976) and Carroll's (1963) school learning theories. The derived model included: NCLEX-RNsuccess = f (Nurse Entrance Test and advanced medical-surgical nursing course grade achieved). The model demonstrates that student performance on the NCLEX-RN can be predicted by one pre-admission measure, and a program measure. The Assessment Technologies Institute achievement exit exam (an outcome measure) had no predictive value for student performance on the NCLEX-RN. The model developed accurately predicted 94% of the student's successful performance on the NCLEX-RN.

Methods for modeling and analyzing concurrent software

Concurrent software executes multiple threads or processes to achieve high performance. However, concurrency results in a huge number of different system behaviors that are difficult to test and verify. The aim of this dissertation is to develop new methods and tools for modeling and analyzing concurrent software systems at design and code levels. This dissertation consists of several related results. First, a formal model of Mondex, an electronic purse system, is built using Petri nets from user requirements, which is formally verified using model checking. Second, Petri nets models are automatically mined from the event traces generated from scientific workflows. Third, partial order models are automatically extracted from some instrumented concurrent program execution, and potential atomicity violation bugs are automatically verified based on the partial order models using model checking. Our formal specification and verification of Mondex have contributed to the world wide effort in developing a verified software repository. Our method to mine Petri net models automatically from provenance offers a new approach to build scientific workflows. Our dynamic prediction tool, named McPatom, can predict several known bugs in real world systems including one that evades several other existing tools. McPatom is efficient and scalable as it takes advantage of the nature of atomicity violations and considers only a pair of threads and accesses to a single shared variable at one time. However, predictive tools need to consider the tradeoffs between precision and coverage. Based on McPatom, this dissertation presents two methods for improving the coverage and precision of atomicity violation predictions: 1) a post-prediction analysis method to increase coverage while ensuring precision; 2) a follow-up replaying method to further increase coverage. Both methods are implemented in a completely automatic tool.

Glaisdale Beck diversion scheme - channel change and suspended sediment response

This paper describes the implementation of a novel mitigation approach and subsequent adaptive management, designed to reduce the transfer of fine sediment in Glaisdale Beck; a small upland catchment in the UK. Hydro-meteorological and suspended sediment datasets are collected over a two year period spanning pre- and post-diversion periods in order to assess the impact of the channel reconfiguration scheme on the fluvial suspended sediment dynamics. Analysis of the river response demonstrates that the fluvial sediment system has become more restrictive with reduced fine sediment transfer. This is characterised by reductions in flow-weighted mean suspended sediment concentrations from 77.93 mg/l prior to mitigation, to 74.36 mg/l following the diversion. A Mann-Whitney U test found statistically significant differences (p < 0.001) between the pre- and post-monitoring median SSCs. Whilst application of one-way analysis of covariance (ANCOVA) on the coefficients of sediment rating curves developed before and after the diversion found statistically significant differences (p < 0.001), with both Log a and b coefficients becoming smaller following the diversion. Non-parametric analysis indicates a reduction in residuals through time (p < 0.001), with the developed LOWESS model over-predicting sediment concentrations as the channel stabilises. However, the channel is continuing to adjust to the reconfigured morphology, with evidence of a headward propagating knickpoint which has migrated 120 m at an exponentially decreasing rate over the last 7 years since diversion. The study demonstrates that channel reconfiguration can be effective in mitigating fine sediment flux in upland streams but the full value of this may take many years to achieve whilst the fluvial system, slowly readjusts.

To what extent does the Health Professions Admission Test-Ireland predict performance in early undergraduate tests of communication and clinical skills? – An observational cohort study

Background: Internationally, tests of general mental ability are used in the selection of medical students. Examples include the Medical College Admission Test, Undergraduate Medicine and Health Sciences Admission Test and the UK Clinical Aptitude Test. The most widely used measure of their efficacy is predictive validity.A new tool, the Health Professions Admission Test- Ireland (HPAT-Ireland), was introduced in 2009. Traditionally, selection to Irish undergraduate medical schools relied on academic achievement. Since 2009, Irish and EU applicants are selected on a combination of their secondary school academic record (measured predominately by the Leaving Certificate Examination) and HPAT-Ireland score. This is the first study to report on the predictive validity of the HPAT-Ireland for early undergraduate assessments of communication and clinical skills. Method. Students enrolled at two Irish medical schools in 2009 were followed up for two years. Data collected were gender, HPAT-Ireland total and subsection scores; Leaving Certificate Examination plus HPAT-Ireland combined score, Year 1 Objective Structured Clinical Examination (OSCE) scores (Total score, communication and clinical subtest scores), Year 1 Multiple Choice Questions and Year 2 OSCE and subset scores. We report descriptive statistics, Pearson correlation coefficients and Multiple linear regression models. Results: Data were available for 312 students. In Year 1 none of the selection criteria were significantly related to student OSCE performance. The Leaving Certificate Examination and Leaving Certificate plus HPAT-Ireland combined scores correlated with MCQ marks.In Year 2 a series of significant correlations emerged between the HPAT-Ireland and subsections thereof with OSCE Communication Z-scores; OSCE Clinical Z-scores; and Total OSCE Z-scores. However on multiple regression only the relationship between Total OSCE Score and the Total HPAT-Ireland score remained significant; albeit the predictive power was modest. Conclusion: We found that none of our selection criteria strongly predict clinical and communication skills. The HPAT- Ireland appears to measures ability in domains different to those assessed by the Leaving Certificate Examination. While some significant associations did emerge in Year 2 between HPAT Ireland and total OSCE scores further evaluation is required to establish if this pattern continues during the senior years of the medical course.

The concept of transport capacity and its use in different geomorphic process domains

The notion of sediment-transport capacity has been engrained in geomorphological and related literature for over 50 years, although its earliest roots date back explicitly to Gilbert in fluvial geomorphology in the 1870s and implicitly to eighteenth to nineteenth century developments in engineering. Despite cross fertilization between different process domains, there seem to have been independent inventions of the idea in aeolian geomorphology by Bagnold in the 1930s and in hillslope studies by Ellison in the 1940s. Here we review the invention and development of the idea of transport capacity in the fluvial, aeolian, coastal, hillslope, débris flow, and glacial process domains. As these various developments have occurred, different definitions have been used, which makes it both a difficult concept to test, and one that may lead to poor communications between those working in different domains of geomorphology. We argue that the original relation between the power of a flow and its ability to transport sediment can be challenged for three reasons. First, as sediment becomes entrained in a flow, the nature of the flow changes and so it is unreasonable to link the capacity of the water or wind only to the ability of the fluid to move sediment. Secondly, environmental sediment transport is complicated, and the range of processes involved in most movements means that simple relationships are unlikely to hold, not least because the movement of sediment often changes the substrate, which in turn affects the flow conditions. Thirdly, the inherently stochastic nature of sediment transport means that any capacity relationships do not scale either in time or in space. Consequently, new theories of sediment transport are needed to improve understanding and prediction and to guide measurement and management of all geomorphic systems.

A 'before and after' study of nursing students' self-assessed competence in identifying the needs of older patients in hospital using an educational workbook.

Background: A core component of nurse education is clinical practice in order to support the development of clinical skills and competence. Assessment and measurement of the clinical competence of nursing students is important to gauge their professional development and educational needs.

Aim: To evaluate the impact of an Older Persons’ Assessment Educational Workbook (OPAEW) and explore second year nursing students’ competence and their opinions and use of the workbook.

Methods: A ‘before and after’ pre-experimental design was undertaken with n=6 second year nursing students. Outcome measures were the Nursing Competencies Questionnaire and the Self-efficacy in Clinical Performance Scale. Content analysis of workbooks and a survey (n=5) of opinions regarding the workbook was undertaken.

Findings: Pre and post test results for the study (n=5) were tested to determine if there was a relationship between changes in the NCQ and SECP repeated measures and use of an OPAEW. Testing identified evidence of a statistically significant difference for both SECP measures (SECP28 p=0.043; SECP7 p=0.042), with no clear statistical evidence of a difference for the NCQ (p=0.08). A weak negative association (NCQ ρ=-0.600 p=0.285; SECP28 ρ=-0.300 p=0.624; SECP7 ρ=-0.205 p=0.741), was found indicating that those participants who scored the lowest scores at the start of the study, benefited most from the workbook.

Content analysis of the OPAEW (n=5) found that 3 of the 5 participants completed all components of the workbook, with a mean of 1051 words used (SD 281.8). Through the survey (n=5) students reported the workbook as a useful guide when undertaking a patient assessment.

Conclusions: The OPAEW showed potential as an intervention to support the development of nursing students’ competence in older person assessment skills.