Heurísticas de pesquisa local para problemas de máquina única

O escalonamento é uma das decisões mais importantes no funcionamento de uma linha de produção. No âmbito desta dissertação foi realizada uma descrição do problema do escalonamento, identificando alguns métodos para a optimização dos problemas de escalonamento. Foi realizado um estudo ao caso do problema de máquina única através do teste de várias instâncias com o objectivo de minimizar o atraso pesado, aplicando uma Meta-Heurística baseada na Pesquisa Local e dois algoritmos baseados no SB. Os resultados obtidos reflectem que os algoritmos baseados no SB apresentaram resultados mais próximos do óptimo, em relação ao algoritmo baseado na PL. Os resultados obtidos permitem sustentar a hipótese de não existirem algoritmos específicos para os problemas de escalonamento. A melhor forma de encontrar uma solução de boa qualidade em tempo útil é experimentar diferentes algoritmos e comparar o desempenho das soluções obtidas.

An Atlas for the future National Park: Las Cumbres de la Sierra de Guadarrama

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Nominations across gender: An empirical investigation of Brazilian municipal elections

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Immunocytochemical identification of leishmania and Trypanosoma cruzi amastigotes in situ with homologous and heterologous polyclonal antibodies

The unlabelled antibody peroxidase-antiperoxidase method was used to study the immunocytochemical properties of Leishmania and Trypanosoma cruzi amastigotes in situ after tissues had been submitted to different fixation procedures. Antisera were obtained from rabbits chronically infected with different strains of T. cruzi or immunized with L. mexicana amazonensis and L. braziliensis guyanensis, and were applied on 5 µm thick sections. T. cruzi antigens were well stained by the three anti-T. cruzi sera and the two anti-heis.hmama.sera at optimum dilution between 1:1,000 and 1:2,000, regardless the parasite strain. Differently, the leishmanial antigens were revealed by Leishmania sera only at low dilutions (between 1:60 -1:160), whereas the anti-T. cruzi sera, at these low dilutions, gave rather weak stainings. Although there is no clear explanation for this immunocytochemical "reverse-monodirectional" cross-reactivity between Leishmania and T. cruzi, the present results show that polyclonal antibodies agains Leishmania species, when used for immunocytochemical detection of these parasites in situ, react more strongly with T. cruzi amastigotes than with the homologous amastigotes.

Study of membrane emulsification process as a pre-step for the microencapsulation of lipid compounds by spray drying

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Customer Lifetime Value: a framework for application in the insurance industry - Building a Business Process to Generate and Maintain an Automatic Estimation Agent

Research Project submited as partial fulfilment for the Master Degree in Statistics and Information Management

Osmo- and thermo-adaptation in hyperthermophilic Archaea: identification of compatible solutes accumulation profiles, and biosynthetic routes in Archaeoglobus spp.

Dissertation presented to obtain the Ph.D degree in Biochemistry

Dependence of IVIM-DWI estimations on acquisition parameters

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Innovation and environmental policy: Clean vs. dirty technical change

We study a two sector endogenous growth model with environmental quality with two goods and two factors of production, one clean and one dirty. Technological change creates clean or dirty innovations. We compare the laissez-faire equilibrium and the social optimum and study first- and second-best policies. Optimal policy encourages research toward clean technologies. In a second-best world, we claim that a portfolio that includes a tax on the polluting good combined with optimal innovation subsidy policies is less costly than increasing the price of the polluting good alone. Moreover, a discriminating innovation subsidy policy is preferable to a non-discriminating one.

Ionic liquids as catalysts of lignocellulosic biomass processing

The present work is devoted to study the pre-treatment of lignocellulosic biomass, especially wheat straw, by the application of the acidic ionic liquid (IL) such as 1-butyl-3-methylimidazolium hydrogen sulphate. The ability of this IL to hydrolysis and conversion of biomass was scrutinised. The pre-treatment with hydrogen sulphate-based IL allowed to obtain a liquor rich in hemicellulosic sugars, furans and organic acids, and a solid fraction mainly constituted by cellulose and lignin. Quantitative and qualitative analyses of the produced liquors were made by capillary electrophoresis and high-performance liquid chromatography. Pre-treatment conditions were set to produce xylose or furfural. Specific range of temperatures from 70 to 175 °C and residence times from 20.0 to 163.3 min were studied by fixing parameters such as biomass/IL ratio (10 % (w/w)) and water content (1.25 % (w/w)) in the pre-treatment process. Statistical modelling was applied to maximise the xylose and furfural concentrations. For the purpose of reaction condition comparison the severity factor for studied ionic liquid was proposed and applied in this work. Optimum conditions for xylose production were identified to be at 125 °C and 82.1 min, at which 16.7 % (w/w) xylose yield was attained. Furfural was preferably formed at higher pre-treatment temperatures and longer reaction time (161 °C and 104.5 min) reaching 30.7 % (w/w) maximum yield. The influence of water content on the optimum xylose formation was also studied. Pre-treatments with 5 and 10 % (w/w) water content were performed and an increase of 100 % and 140 % of xylose yield was observed, respectively, while the conversion into furfural maintained unchanged.

Isolation and encapsulation of a natural colourant using green technologies

The use of natural pigments instead of synthetic colourants is receiving growing interest in the food industry. In this field, cactus pears (Opuntia spp.) have been identified to be a promising betalainic crops covering a wide coloured spectrum. The aim of this work was to develop adequate clean and mild methodologies for the isolation and encapsulation of betacyanins, from cactus pear fruits (Opuntia spp.). Firstly, two different emerging technologies, namely PLE (Pressurized Liquid Extraction) and HPCDAE (High Pressure Carbon Dioxide-Assisted Extraction), were exploited to isolation of betacyanins form cactus pear fruits. Different process conditions were tested for the maximum recovery of betacyanins. Results showed that highest extraction yields were achieved for HPCDAE and mass ratio of pressurized carbon dioxide vs. acidified water was the parameter that most affected the betacyanins extraction. At optimum conditions of HPCDAE, Opuntia spp. extract presented a total betacyanin content of 211 ± 10 mg/100 g whereas extracts obtained using conventional extraction, PLE in static and in dynamic mode presented a total betacyanin content of 85 ± 3, 191 ± 2 and 153 ± 5 mg/100 g, respectively. HPCDAE has proven to be a successful technology to extract betacyanins from Opuntia spp. fruits. Afterward, Supercritical Fluid Technology was exploited to develop lipidic particles of betalain-rich extract. A betacyanin-rich conventional extract was encapsulated by PGSS® (Particles from Gas Saturated Solutions) technique. Different process conditions were tested in order to model the encapsulation of betacyanins. The pressure had a negative effect on betacyanin encapsulation. Lower pressures leads to an increase in the betacyanin encapsulation. This effect was more pronounced at higher temperatures and lower equilibrium time. At these conditions, Opuntia spp. particles presented 64.4 ± 4.5 mg/100 g and high antioxidant capacity. When compared with the Opuntia spp. dried extract, lipidic particles contributed to a better homogenization of the pink colour after incorporation in ice cream.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

Fatores que influenciam a adesão à terapêutica antirretroviral : a perceção dos enfermeiros de um serviço de infeciologia

RESUMO - A investigação no âmbito da infeção por VIH/SIDA tem tido avanços notáveis, nomeadamente no que se refere à evolução da terapêutica antirretroviral, sendo atualmente o único meio de controlar a doença. Nesta área, a compreensão da problemática da adesão torna-se importante para as instituições e para os profissionais de saúde, quer pelas taxas de morbilidade e mortalidade associadas à doença, quer pelos problemas de saúde pública e pelos gastos financeiros das organizações de saúde. A adesão ao regime terapêutico é um conceito que engloba tanto o cumprimento da prescrição medicamentosa, como dos comportamentos promotores de saúde. O presente estudo teve como objetivo identificar como os enfermeiros, a desempenhar funções num serviço de infeciologia, percecionam a adesão à terapêutica antirretroviral, por indivíduos portadores de VIH/SIDA. Participaram neste estudo nove enfermeiras a desempenhar funções no serviço de Medicina 1/Infeciologia/HDI do Hospital Fernando Fonseca, EPE, que reuniam os critérios definidos. Como metodologia para a identificação da perceção dos enfermeiros realizou-se um estudo qualitativo e utilizou-se uma entrevista semi-estruturada. Da análise das entrevistas, resultaram diferentes áreas temáticas. Os resultados obtidos evidenciam a importância atribuída à adesão à terapêutica antirretroviral e demostram que o acompanhamento dos doentes pelos profissionais e instituições de saúde permite o desenvolvimento de estratégias promotoras de adesão. Verifica-se que é ainda necessário percorrer um longo caminho, de forma a se obterem resultados ótimos de adesão. Contudo, os resultados obtidos no presente estudo são um incentivo para o desenvolvimento de estratégias de adesão e para a melhoria da gestão da qualidade.

Prospective system analysis of stationary battery systems under the frame of Constructive Technology Assessment

Based on the report for the unit “Project IV” of the PhD programme on Technology Assessment under the supervision of Dr.-Ing. Marcel Weil and Prof. Dr. António Brandão Moniz. The report was presented and discussed at the Doctorate Conference on Technologogy Assessment in July 2013 at the University Nova Lisboa, Caparica campus.

Analysis and implementation of a multi-ratio switched capacitor DC-DC converter for a supercapacitor power supply

An energy harvesting system requires an energy storing device to store the energy retrieved from the surrounding environment. This can either be a rechargeable battery or a supercapcitor. Due to the limited lifetime of rechargeable batteries, they need to be periodically replaced. Therefore, a supercapacitor, which has ideally a limitless number of charge/discharge cycles can be used to store the energy; however, a voltage regulator is required to obtain a constant output voltage as the supercapacitor discharges. This can be implemented by a Switched-Capacitor DC-DC converter which allows a complete integration in CMOS technology, although it requires several topologies in order to obtain a high efficiency. This thesis presents the complete analysis of four different topologies in order to determine expressions that allow to design and determine the optimum input voltage ranges for each topology. To better understand the parasitic effects, the implementation of the capacitors and the non-ideal effect of the switches, in 130 nm technology, were carefully studied. With these two analysis a multi-ratio SC DC-DC converter was designed with an output power of 2 mW, maximum efficiency of 77%, and a maximum output ripple, in the steady state, of 23 mV; for an input voltage swing of 2.3 V to 0.85 V. This proposed converter has four operation states that perform the conversion ratios of 1/2, 2/3, 1/1 and 3/2 and its clock frequency is automatically adjusted to produce a stable output voltage of 1 V. These features are implemented through two distinct controller circuits that use asynchronous time machines (ASM) to dynamically adjust the clock frequency and to select the active state of the converter. All the theoretical expressions as well as the behaviour of the whole system was verified using electrical simulations.