Variation of the Group 5 Grass Pollen Allergen Content of Airborne Pollen in Relation to Geographical Location and Time in Season

Allergies to grass pollen are the number one cause of outdoor hay fever. The human immune system reacts with symptoms to allergens from pollen. Objective: We investigated the natural variability in release of the major group 5 allergen from grass pollen across Europe. Methods: Airborne pollen and allergens were simultaneously collected daily with a volumetric spore trap and a high-volume cascade impactor at 10 sites across Europe for 3 consecutive years. Group 5 allergen was determined with a Phl p 5 specific ELISA in two fractions of ambient air: Particulate Matter (PM) >10μm and 10μm>PM>2.5μm. Mediator release by ambient air was determined in FcεR1-humanized basophils. Origin of pollen was modeled and condensed to pollen potency maps. Results: On average grass pollen released 2.3 pg Phl p 5/pollen. Allergen release per pollen (potency) varied substantially, ranging from 0 to 9 pg Phl p 5/pollen (5 to 95% percentile). The main variation was locally day-to-day. Average potency maps across Europe varied between years. Mediator release from basophilic granulocytes correlated better with allergen/m3 (r2=0.80, p<0.001) than with pollen/m3 (r2=0.61, p<0.001). In addition, pollen released different amounts of allergen in the nonpollen bearing fraction of ambient air depending on humidity. Conclusion: Across Europe, the same amount of pollen released substantially different amounts of group 5 grass pollen allergen. This variation in allergen release is on top of variations in pollen counts. Molecular aerobiology, i.e. determining allergen in ambient air, may be a valuable addition to pollen counting.

Forecasting Methodologies for Ganoderma Spore Concentration Using Combined Statistical Approaches and Model Evaluations

High concentration levels of Ganoderma spp. spores were observed in Worcester, UK, during 2006–2010.These basidiospores are known to cause sensitization due to the allergen content and their small dimensions. This enables them to penetrate the lower part of the respiratory tract in humans. Establishment of a link between occurring symptoms of sensitization to Ganoderma spp. and other basidiospores is challenging due to lack of information regarding spore concentration in the air. Hence, aerobiological monitoring should be conducted, and if possible extended with the construction of forecast models. Daily mean concentration of allergenic Ganoderma spp. spores in the atmosphere of Worcester was measured using 7-day volumetric spore sampler through five consecutive years. The relationships between the presence of spores in the air and the weather parameters were examined. Forecast models were constructed for Ganoderma spp. spores using advanced statistical techniques, i.e. multivariate regression trees and artificial neural networks. Dew point temperature along with maximumtemperature was the most important factor influencing the presence of spores in the air of Worcester. Based on these two major factors and several others of lesser importance, thresholds for certain levels of fungal spore concentration, i.e. low (0–49 s m−3), moderate(50–99 s m−3), high (100–149 s m−3) and very high (150

Potential Impact of Climate Change on Fungal Distributions: Analysis of 2 Years of Contrasting Weather in the UK

The impact of climate change on fungal growth and spore production is less well documented than for allergenic pollen grains, although similar implications for respiratory tract diseases in humans occur. Fungal spores are commonly described as either “dry” or “wet” according to the type of weather associated with their occurrence in the air. This study examined the distribution of selected fungal spores (Alternaria spp., Cladosporium spp., Didymella spp., Epicoccum spp., Leptosphaeria spp. and rusts) occurring in the West Midlands of UK during 2 years of contrasting weather. Spore specimens were collected using a 7-day volumetric air sampler and then analysed with the aid of light microscopy. Distributions of spores were then studied using normality tests and Mann–Whitney U test, while relationships with meteorological parameters were investigated using Spearman’s rank test and angular-linear correlation for wind direction analysis. Our results showed that so-called wet spores were more sensitive to the weather changes showing statistically significant differences between the 2 years of study, in contrast to “dry” spores. We predict that in following years we will observe accelerated levels in allergenic fungal spore production as well as changes in species diversity. This study could be a starting point to revise the grouping system of fungal spores as either “dry” or “wet” types and their response to climate change

An Analysis of Local Wind and Air Mass Directions and Their Impact on Cladosporium Distribution Using HYSPLIT and Circular Statistics

Ecological studies that examine species-environment relationships are often limited to several meteorological parameters, i.e. mean air temperature, relative humidity, precipitation, vapour pressure deficit and solar radiation. The impact of local wind, its speed and direction are less commonly investigated in aerobiological surveys mainly due to difficulties related to the employment of specific analytical tools and interpretation of their outputs. Identification of inoculum sources of economically important plant pathogens, as well as highly allergenic bioaerosols like Cladosporium species, has not been yet explored with remote sensing data and atmospheric models such as Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT). We, therefore, performed an analysis of 24 h intra-diurnal cycle of Cladosporium spp. spores from an urban site in connection with both the local wind direction and overall air mass direction computed by HYSPLIT. The observational method was a volumetric air sampler of the Hirst design with 1 h time resolution and corresponding optical detection of fungal spores with light microscopy. The atmospheric modelling was done using the on-line data set from GDAS with 1° resolution and circular statistical methods. Our results showed stronger, statistically significant correlation (p ≤ 0.05) between high Cladosporium spp. spore concentration and air mass direction compared to the local wind direction. This suggested that a large fraction of the investigated fungal spores had a regional origin and must be located more than a few kilometers away from the sampling point.

Investigating and Predicting Atmospheric Concentrations of Allergenic Fungal Spores (Alternaria, Cladosporium, Didymella and Ganoderma)

Air quality is an increasing concern of the European Union, local authorities, scientists and most of all inhabitants that become more aware of the quality of the surrounding environment. Bioaerosols may be consisted of various elements, and the most important are pollen grains, fungal spores, bacteria, viruses. More than 100 genera of fungal spores have been identified as potential allergens that cause immunological response in susceptible individuals. Alternaria and Cladosporium have been recognised as the most important fungal species responsible for respiratory tract diseases, such as asthma, eczema, rhinitis and chronic sinusitis. While a lot of attention has been given to these fungal species, a limited number of studies can be found on Didymella and Ganoderma, although their allergenic properties were proved clinically. Monitoring of allergenic fungal spore concentration in the air is therefore very important, and in particular at densely populated areas like Worcester, UK. In this thesis a five year spore data set was presented, which was collected using a 7-day volumetric spore trap, analysed with the aid of light microscopy, statistical tests and geographic information system techniques. Although Kruskal-Wallis test detected statistically significant differences between annual concentrations of all examined fungal spore types, specific patterns in their distribution were also found. Alternaria spores were present in the air between mid-May/mid-June until September-October with peak occurring in August. Cladosporium sporulated between mid-May and October, with maximum concentration recorded in July. Didymella spores were seen from June/July up to September, while peaks were found in August. Ganoderma produced spores for 6 months (May-October), and maximum concentration could be found in September. With respect to diurnal fluctuations, Alternaria peaked between 22:00h and 23:00h, Cladosporium 13:00-15:00h, Didymella 04:00-05:00h and 22:00h-23:00h and Ganoderma from 03:00h to 06:00h. Spatial analysis showed that sources of all fungal species were located in England, and there was no evidence for a long distance transport from the continent. The maximum concentration of spores was found several hours delayed in comparison to the approximate time of the spore release from the crops. This was in agreement with diurnal profiles of the spore concentration recorded in Worcester, UK. Spores of Alternaria, Didymella and Ganoderma revealed a regional origin, in contrast to Cladosporium, which sources were situated locally. Hence, the weather conditions registered locally did not exhibit strong statistically significant correlations with fungal spore concentrations. This has had also an impact on the performance of the forecasting models. The best model was obtained for Cladosporium with 66% of the accuracy.

Bevacizumab in NF2-related vestibular schwannomas: a nationally coordinated approach to delivery and prospective evaluation

Background: NF2 patients develop multiple nervous system tumors including bilateral vestibular schwannomas (VS). The tumors and their surgical treatment are associated with deafness, neurological disability, and mortality. Medical treatment with bevacizumab has been reported to reduce VS growth and to improve hearing. In addition to evaluating these effects, this study also aimed to determine other important consequences of treatment including patient-reported quality of life and the impact of treatment on surgical VS rates. Methods: Patients treated with bevacizumab underwent serial prospective MRI, audiology, clinical, CTCAE-4.0 adverse events, and NFTI-QOL quality-of-life assessments. Tumor volumetrics were classified according to the REiNs criteria and annual VS surgical rates reviewed. Results: Sixty-one patients (59% male), median age 25 years (range, 10–57), were reviewed. Median follow-up was 23 months (range, 3–53). Partial volumetric tumor response (all tumors) was seen in 39% and 51% had stabilization of previously growing tumors. Age and pretreatment growth rate were predictors of response. Hearing was maintained or improved in 86% of assessable patients. Mean NFTI-QOL scores improved from 12.0 to 10.7 (P < .05). Hypertension was observed in 30% and proteinuria in 16%. Twelve treatment breaks occurred due to adverse events. The rates of VS surgery decreased after the introduction of bevacizumab. Conclusion: Treatment with bevacizumab in this large, UK-wide cohort decreased VS growth rates and improved hearing and quality of life. The potential risk of surgical iatrogenic damage was also reduced due to an associated reduction in VS surgical rates. Ongoing follow-up of this cohort will determine the long-term benefits and risks of bevacizumab treatment.

Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors

We report the results of a study of the sulphurization time effects on Cu2ZnSnS4 absorbers and thin film solar cells prepared from dc-sputtered tackedmetallic precursors. Three different time intervals, 10 min, 30min and 60 min, at maximum sulphurization temperature were considered. The effects of this parameter' change were studied both on the absorber layer properties and on the final solar cell performance. The composition, structure, morphology and thicknesses of the CZTS layers were analyzed. The electrical characterization of the absorber layer was carried out by measuring the transversal electrical resistance of the samples as a function of temperature. This study shows an increase of the conductivity activation energy from 10 meV to 54meV for increasing sulphurization time from 10min to 60min. The solar cells were built with the following structure: SLG/Mo/CZTS/CdS/i-ZnO/ZnO:Al/Ni:Al grid. Several ac response equivalent circuit models were tested to fit impedance measurements. The best results were used to extract the device series and shunt resistances and capacitances. Absorber layer's electronic properties were also determined using the Mott–Schottky method. The results show a decrease of the average acceptor doping density and built-in voltage, from 2.0 1017 cm−3 to 6.5 1015 cm−3 and from 0.71 V to 0.51 V, respectively, with increasing sulphurization time. These results also show an increase of the depletion region width from approximately 90 nm–250 nm.

Estudo da compactabilidade em laboratório de misturas betuminosas com resíduos plásticos

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Vias de Comunicação e Transportes

Optimization of bioplastics production from cheese whey

Dissertation presented in partial fulfillment of the requirements for the degree of Master in Biotechnology

Development of fractional order capacitors based on electrolyte processes

In recent years, significant research in the field of electrochemistry was developed. The performance of electrical devices, depending on the processes of the electrolytes, was described and the physical origin of each parameter was established. However, the influence of the irregularity of the electrodes was not a subject of study and only recently this problem became relevant in the viewpoint of fractional calculus. This paper describes an electrolytic process in the perspective of fractional order capacitors. In this line of thought, are developed several experiments for measuring the electrical impedance of the devices. The results are analyzed through the frequency response, revealing capacitances of fractional order that can constitute an alternative to the classical integer order elements. Fractional order electric circuits are used to model and study the performance of the electrolyte processes.

Controlo e optimização da perfuração em desmonte de maciços rochosos fracturados: avaliação preliminar

O presente trabalho tem por objectivo contribuir para aprofundar o conhecimento da temática que envolve a qualidade de execução da perfuração em maciços rochosos fracturados. A necessidade de conhecimento prévio sobre os resultados que podem ocorrer no desmonte de maciços rochosos após a realização da perfuração, leva a uma procura de indicadores que possibilitem obter mais conhecimento nessa matéria. No encadeamento do processo de análise de projecto, está o conhecimento adquirido, a caracterização do maciço rochoso, a implementação de correcções na componente da perfuração ajustadas ao maciço estudado e uma potencial previsão de granulometria final por emergência de um índice de qualidade, “Índice de Dispersão Volumétrica” que correlacione os elementos constituintes da geometria do diagrama de fogo e da envolvente intrínseca da matriz rochosa e aponte uma expectável granulometria final. Para atingir um nível de qualidade na operação global do processo de desmonte, a perfuração que está no topo da pirâmide assume papel de guia para as seguintes etapas, pelo que a qualidade dos equipamentos e acessórios e a sua correcta operação são fundamentais para obter o rigor da perfuração projectada, com vista a atingir uma determinada granulometria.

Metodologias no Controlo de Compactação em Aterros

O presente trabalho pretende abordar aspectos relacionados com o controlo de compactação em aterros, com base na avaliação de parâmetros “in situ”, tais como: pesos volúmicos, teores em água, graus de compactação e módulos de deformabilidade. Recorrendo aos métodos correntes no controlo de compactação, como o ensaio de carga em placa, gamadensímetro, garrafa e ao ensaio de deflectómetro de impacto portátil. Visa-se comparar os resultados obtidos, nas diferentes condições, de modo a possibilitar alcançar correlações entre os ensaios, bem como determinar aqueles que apresentam maior grau de confiança técnico e vantagens operacionais e económicas. De modo a garantir os índices de qualidade da obra é necessário fazer cumprir os critérios exigidos pelo caderno de encargos, nomeadamente nos parâmetros de avaliação do controlo de compactação, para que estas satisfaçam o seu estado funcional e estrutural. Neste tipo de obras os cadernos de encargos de referência em Portugal são os das Estradas de Portigal (EP) e da Brisa, Auto-estradas de Portugal (Brisa), os quais se baseiam em recomendações de classificações de solos. No contexto experimental, foram efectuados dois estudos com condições e materiais diferentes, em obras pertencentes à empresa Mota-Engil Engenharia e Construções, S.A. Nas campanhas de ensaios foram realizados ensaios “in situ” na obra da Subconcessão do Douro Interior – Lote 6 – IC5 – Troço Murça/ Nó de Pombal nas camadas de sub-base e base num agregado de granulometria extensa, e na obra de modernização do troço ferroviário Bombel e Vidigal a Évora, em solos.

Estudo sobre viabilidade de produção descentralizada de energia à custa do efeito chaminé

A procura por alternativas ao atual paradigma energético, que se caracteriza por uma predominância indiscutível das fontes combustíveis fósseis, é o motivo primário desta investigação. A energia emitida pelo Sol que chega à Terra diariamente ultrapassa em várias ordens de grandeza a energia que a nossa sociedade atual necessita. O efeito chaminé é uma das formas de aproveitar essa energia. Este efeito tem origem no diferencial de temperaturas existente entre o interior e o exterior de uma chaminé, que provoca um gradiente nas massas volúmicas do fluido entre o interior e o exterior da chaminé, induzindo assim um fluxo de ar. Esta diferença de temperaturas radica na exposição da face exterior da chaminé à radiação solar. No sistema que nos propomos estudar, o ar entra na chaminé por pequenos orifícios situados na sua base, e, ao tomar contacto com as paredes internas da chaminé, aquece desde a temperatura ambiente, Ta, até à temperatura interna, Ti . Este aumento de temperatura torna o ar dentro da chaminé mais “leve” em comparação com o ar mais frio do exterior levando-o a ascender ao longo do interior da chaminé. Este escoamento contém energia cinética que pode, por exemplo, ser transformada em energia elétrica por intermédio de turbinas. A eficiência de conversão da energia será tanto maior quanto menor for a velocidade do ar a jusante da turbina. Esta tecnologia poderá ser instalada de forma descentralizada, como acontece com as atuais centrais concentradoras solares térmicas e fotovoltaicas localizadas na periferia de grandes cidades ou, alternativamente, poderá ser inserida no próprio tecido urbanístico. A investigação demonstra que as dimensões da chaminé, a irradiação e a temperatura do ar são os fatores com maior impacto na potência hidráulica gerada.

Production of chitin-glucan complex by Pichia pastoris

Dissertation for the Degree of Master in Biotechnology

Production of bacterial biopolymers from industrial fat-containing wastes

Dissertation presented in partial fulfilment of the Requirements for the Degree of Master in Biotechnology