The implications of the 2003 Common Agricultural Policy reforms for land use and landscape quality in England

The assessment of the potential landscape impacts of the latest Common Agricultural Policy reforms constitutes a challenge for policy makers and it requires the development of models that can reliably project the likely spatial distribution of land uses. The aim of this study is to investigate the impact of 2003 CAP reforms to land uses and rural landscapes across England. For this purpose we modified an existing economic model of agriculture, the Land-Use Allocation Model (LUAM) to provide outputs at a scale appropriate for informing a semi-quantitative landscape assessment at the level of ‘Joint Character Areas’ (JCAs). Overall a decline in the cereal and oilseed production area is projected but intensive arable production will persist in specific locations (East of England, East Midlands and South East), having ongoing negative effects on the character of many JCAs. The impacts of de-coupling will be far more profound on the livestock sector; extensification of production will occur in traditional mixed farming regions (e.g. the South West), a partial displacement of cattle by sheep in the upland regions and an increase in the sheep numbers is expected in the lowlands (South East, Eastern and East Midlands). This extensification process will affect positively those JCAs of mixed farming conditions, but it will have negative impacts on the JCAs of historically low intensity farming (e.g. the uplands of north-west) because they will suffer from under-management and land idling. Our analysis shows that the territorialisation between intensively and extensively agricultural landscapes will continue.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

Nexus between contracting and construction professional service businesses: empirical evidence from international market

he construction market around the world has witnessed the growing eminence of construction professional services (CPSs), such as urban planning, architecture, engineering, and consultancy, while the traditional contracting sector remains strong. Nowadays, it is not uncommon to see a design firm taking over the work of a traditional main contractor, or vice versa, of overseeing the delivery of a project. Although the two sectors of contracting and CPS share the same purpose of materializing the built environment, they are as different as they are interrelated. Much has been mentioned about the nexus between the two but little has been done to articulate it using empirical evidence. This study examined the nexus between contracting and CPS businesses by offering and testing lead-lag effects between the two sectors in the international market. A longitudinal panel data composed of 23 top international contractors and CPS firms was adopted. Surprisingly, results of the panel data analyses show that CPS business does not have a significant positive causal effect on contracting as a downstream business, and vice versa. CPS and contracting subsidiaries, although within the same company, do not necessarily form a consortium to undertake the same project; rather, they often collaborate with other CPS or contracting counterparts to undertake projects. This paper provides valuable insights into the sophisticated nexus between contracting and CPS in the international construction market. It will support business executives’ rational decision making for selecting proper contracting or CPS allies, or a proper mergers and acquisitions strategy in the international market. The paper also provides a fresh perspective through which researchers can better investigate the diversification strategies adopted by international contracting and CPS firms.

Ventilation performance in a passage between two non-parallel buildings

A great number of studies on wind conditions in passages between slab-type buildings have been conducted in the past. However, wind conditions under different structure and configuration of buildings is still unclear and studies existed still can’t provide guidance on urban planning and design, due to the complexity of buildings and aerodynamics. The aim of this paper is to provide more insight in the mechanism of wind conditions in passages. In this paper, a simplified passage model with non-parallel buildings is developed on the basis of the wind tunnel experiments conducted by Blocken et al. (2008). Numerical simulation based on CFD is employed for a detailed investigation of the wind environment in passages between two long narrow buildings with different directions and model validation is performed by comparing numerical results with corresponding wind tunnel measurements.

The kommuna impulse: collective mechanisms and commune-ists in the early Soviet State

This study examines the creation of the urban kommuna (commune) and the ideals that stimulated this social phenomenon – the kommuna impulse of the nascent Soviet state. Collective idealism affected Soviet housing, architecture and even urban planning, but little is known of social experiments in commune‐ism. As a result, these collective cells have been dismissed as utopian anomalies or the product of a housing shortage. Here it is argued that these discursive assessments are unsatisfactory and isolated from the historical narrative. While utopian ideals and domestic necessity were central to the formation of collective living, the kommuna was also involved in an active discourse with collectivism and socialist ideology. The kommuna cell was a dynamic entity that required considerable formative planning. The activists who forged these cells – the self‐identified ‘communards’ – turned their everyday domestic life into a socialist battleground, in which they struggled with the key debates of the early Soviet state. This article examines the communard as a social activist in order to better understand this phenomenon. It clarifies the coexistence of ideological and idealist trends among Soviet youth with practical contingencies for socialism. Furthermore, it reveals the process by which the kommuna impulse and these contingencies developed throughout the 1920s and early 1930s.

On processing GPS tracking data of car-movements in Borlänge, Sweden

The advancement of GPS technology enables GPS devices not only to be used as orientation and navigation tools, but also to track travelled routes. GPS tracking data provides essential information for a broad range of urban planning applications such as transportation routing and planning, traffic management and environmental control. This paper describes on processing the data that was collected by tracking the cars of 316 volunteers over a seven-week period. The detailed information is extracted. The processed data is further connected to the underlying road network by means of maps. Geographical maps are applied to check how the car-movements match the road network. The maps capture the complexity of the car-movements in the urban area. The results show that 90% of the trips on the plane match the road network within a tolerance.

Analysis Of Semi-Distributed And Global Hydrological Models In The Central Tropical Basins Of The Gulf Of Mexico To The Effects Of Extreme Hydrometeorological Phenomena

In the last years extreme hydrometeorological phenomena have increased in number and intensity affecting the inhabitants of various regions, an example of these effects are the central basins of the Gulf of Mexico (CBGM) that they have been affected by 55.2% with floods and especially the state of Veracruz (1999-2013), leaving economic, social and environmental losses. Mexico currently lacks sufficient hydrological studies for the measurement of volumes in rivers, since is convenient to create a hydrological model (HM) suited to the quality and quantity of the geographic and climatic information that is reliable and affordable. Therefore this research compares the semi-distributed hydrological model (SHM) and the global hydrological model (GHM), with respect to the volumes of runoff and achieve to predict flood areas, furthermore, were analyzed extreme hydrometeorological phenomena in the CBGM, by modeling the Hydrologic Modeling System (HEC-HMS) which is a SHM and the Modèle Hydrologique Simplifié à I'Extrême (MOHYSE) which is a GHM, to evaluate the results and compare which model is suitable for tropical conditions to propose public policies for integrated basins management and flood prevention. Thus it was determined the temporal and spatial framework of the analyzed basins according to hurricanes and floods. It were developed the SHM and GHM models, which were calibrated, validated and compared the results to identify the sensitivity to the real model. It was concluded that both models conform to tropical conditions of the CBGM, having MOHYSE further approximation to the real model. Worth mentioning that in Mexico there is not enough information, besides there are no records of MOHYSE use in Mexico, so it can be a useful tool for determining runoff volumes. Finally, with the SHM and the GHM were generated climate change scenarios to develop risk studies creating a risk map for urban planning, agro-hydrological and territorial organization.

A climatologia aplicada ao ambiente construído : uma contribuição à caracterização climática de Porto Alegre/RS

Com caráter informativo, inicia-se apresentando a relação entre a climatologia e o ambiente construído, em seus campos especificos de aplicação (urbanismo, projeto de edificações, execução de obras, e manutenção e uso das construções), considerando-se os aspectos históricos, econômico-ecológicos e os ligados à súde e ao conforto do usuário, abrangidos por tal relação. A importância da disponibilidade de informações climatológicas é então comentada, bem como diversas metodalagias de análise e representação de dados climáticos. Com caráter aplicativo, apresenta-se uma contribuigão à caracterização climática da cidade de Porto Alegre, RS. São analisadas os valores médios horários-mensais doa principais parâmetros climáticos disponíveis (temperatura, umidade, velocidade e direção do vento, e nebulosidade), propondo-se uma representação gráfica sintética alternativa para os mesmos. A análise é complementada pala execução de dois procedimentos técnicos: avaliação do conforto térmico, com identificação do período critico de verão, e projeto de dispositivo de sombreamento de aberturas retangulares. Embora esteja em foco o caso específico de Porto Alegre, tais metodologias encontram-se descritas de modo a serem aplicadas a qualquer outra localidade, procurando-se ampliar a utilidade prática do presente estudo.

A necessidade da reserva de área para o armazenamento de água no início do crescimento urbano

Atualmente, o desenho urbano tem sido realizado dentro de um âmbito restrito do conhecimento. Este não tem considerado aspectos de drenagem da água que trazem grandes transtornos e custos para a sociedade e o ambiente. O desenvolvimento urbano brasileiro tem produzido um aumento significativo na freqüência de inundações, na produção de sedimentos e na deterioração da qualidade da água. Tal situação é decorrente, na maioria dos casos, da ocupação intensiva do solo urbano. Assim, essa abordagem demonstra, inicialmente, uma visão sobre o desenho urbano e suas interfaces; particularmente as relacionadas com a geografia, o ambiente natural e o construído. Na seqüência, pretendendo atingir o enfoque interdisciplinar, aponta vínculos entre o desenho urbano e a hidrologia através de uma análise ambiental de bairros dos municípios de Porto Alegre e Lindolfo Collor, de modo a identificar relações com a utilização de uma variável - a superfície impermeável, procurando descrever o comportamento ambiental de bacias hidrográficas urbanizadas bem como mostrar a necessidade da reserva de área para armazenar água no início do crescimento urbano. Finalizando, apresenta os principais parâmetros ou características de desenho que deverão garantir a sustentabilidade urbana e hidrológica. Apesar de prematuro, pode-se afirmar que existem indícios para que a dissertação venha suprir algumas deficiências existentes no planejamento urbano-ambientalatualmente adotado.

Qualidade de vida e transporte público urbano: estratégias para melhorar a qualidade do serviço de transporte público urbano por ônibus

If urban planning is to support the equitable distribution of public goods and services, it must recognize and address the dismal condition of millions of poor people who are living in a city. The primary focus of contemporary planners and planning students should be on finding and advocating solutions that help eliminate the problems of today¿s cities. Any meaningful solution will need to be grounded in a thorough understanding of the social class inequities of citizens. With the rapid development of national economy and urbanization process in Brazil over the last two decades, the number of vehicles and their travels are dramatically increased. This is particularly evident in all large cities. Traffic congestion becomes more and more severe. Inadequate parking facilities often result in difficulty to find a parking space in large cities and many illegally parked vehicles can be seen on the crowed streets. These illegally parked vehicles further intensify traffic congestion and also pose a traffic safety hazard. The process of urbanization and motorization in Brazil is likely to continue in a rapid pace. The urban public passengers transport modes problems in large cities are likely to get even worse. There is an urgent need for the development of policy and criteria for public service of urban public passenger transport by bus in large cities. The purpose of survey is to develop policy guidelines for public transport services planning, design, construction and mobility management, that meet community needs for accessibility in large cities. So this thesis will present major comparative characteristics of urban mobility management, urban public passengers transport by bus services planning and the quality of social life in two towns of Brazil: Rio de Janeiro and Curitiba. The study case has been focused on Rio de Janeiro and Curitiba because of the major different results of the survey presented by the two cities. The objectives of this thesis are: a) to analyze and discus existing urban mobility related accessibility and economic development problems in large cities; b) to provide an overview of the relationship within city ¿ quality of social life ¿ urban mobility in Rio and Curitiba; c) to analyze and discuss existing urban mobility management related public transport services in Rio and Curitiba; d) to analyze and discuss existing quality of bus public transport services problems in Rio. Some preliminary recommendations for mobility management policies will also be presented.

Conflito socioambiental e o papel dos conselhos gestores: a experiência de São Sebastião, São Paulo

A popularização dos conselhos de políticas públicas setoriais foi fortemente ampliada na década de 1990, decorrente principalmente das estratégias de descentralização da Constituição de 1988. Os municípios brasileiros tiveram as responsabilidades federativas ampliadas, especialmente no que tange a questão ambiental e o desenvolvimento urbano. O trabalho analisa como as correntes ambientais e de planejamento urbano se fundem no desenvolvimento da cidade a partir do estudo de caso sobre o município de São Sebastião, litoral norte de São Paulo tendo atenção especial à gênese do Conselho Municipal de Meio Ambiente e Desenvolvimento Urbano como arena de planejamento, conflito e negociação dos distintos interesses locais. Procurou-se discutir, a luz da teoria democrática, os conceitos de participação e deliberação, como alguns dos elementos essenciais ao funcionamento dos conselhos como instrumento de planejamento público e, dessa forma, apontar os limites que o objeto estudado apresenta na gestão compartilhada das políticas públicas locais.

Jogos Pan-Americanos de 2007: uma avaliação social

O presente estudo objetivou verificar até que ponto os impactos e o legado da implementação dos Jogos Pan-americanos de 2007 alteraram as condições sociais e a forma de utilização do espaço urbano na cidade do Rio de Janeiro. Considerou-se que a competição das Américas esteja inserida na aplicação dos conceitos da cidade global, uma vez que os festivais esportivos internacionais se transformaram em megaeventos na esteira da consolidação do pensamento do planejamento urbano competitivo. Para contextualizar essa análise foi necessária uma pesquisa sobre a trajetória urbana da cidade-sede na interseção dos dois movimentos: cidade global e megaeventos. Tendo em vista que a decisão da realização do megaevento carioca foi tomada pela esfera pública, assim como o seu financiamento, foram analisados os gastos estatais e reclassificados, segundo a metodologia de O‟Connor (1977), e divididos nas funções de acumulação e de legitimação com o intuito de identificar os favorecidos e os desfavorecidos pela política pública efetivada. Os resultados da investigação sinalizam um aprofundamento da desigualdade social e urbana, via transferências de recursos públicos para o domínio do capital privado

Estado e participação pública em questões ambientais urbanas

Nessa tese relaciona-se a problemática ambiental com a problemática social tal como esta se apresenta em áreas urbanas de sociedades do Sul, particularmente no Brasil. Faz-se um esforço de não confundí-las, apontando suas especificidades e as possibilidades, que a primeira traduz, no sentido de repensar, em termos teóricos, o planejamento e a gestão das cidades. Discute-se o papel do Estado capitalista nessas sociedades, enquanto mediador de conflitos sociais resultantes de políticas públicas excludentes. Discute-se ainda o significado, limites e possibilidades da participação pública na definição e/ou implementação de tais políticas e o papel que a educação ambiental pode assumir neste sentido. Apresenta-se dois estudos de caso tratando da degradação ambiental de bacias hidrográficas localizadas na Região Metropolitana de São Paulo, nos quais a participação pública tem se dado em algum nível, contribuindo para a tomada de decisões. Num caso, esta se dá numa conjuntura política onde as decisões tecnocráticas são determinantes; em outro, está relacionada com a tentativa, por parte do Estado, de implantação de uma gestão mais democrática, que implica no diálogo deste com as organizações civis visando a realização de negociações.