Degradation of the resin-dentin bonds after simulated and inhibited cariogenic challenge in an in situ model

The aim of this study was to evaluate the resindentin bonds of two simplified etch-and-rinse adhesive after simulated cariogenic and inhibited cariogenic challenge in situ. Dental cavities (4 mm wide, 4 mm long, and 1.5 mm deep) were prepared in 60 bovine teeth with enamel margins. Restorations were bonded with either adhesive Adper Single Bond 2 (3MESPE) or Optibond Solo Plus (Kerr). Forty restorations were included in an intra-oral palatal appliance that was used for 10 adult volunteers while the remaining 20 dental blocks were not submitted to any cariogenic challenge [NC group] and tested immediately. For the simulated cariogenic challenge [C+DA], each volunteer dropped 20% sucrose solution onto all blocks four times a day during 14 days and distilled water twice a day. In the inhibited cariogenic challenge group [C + FA], the same procedure was done, but slurry of fluoride dentifrice (1.100 ppm) was applied instead of water. The restored bovine blocks were sectioned to obtain a slice for cross-sectional Vickers microhardness evaluation and resindentin bonded sticks (0.8 mm2) for resindentin microtensile evaluation. Data were evaluated by two-way ANOVA and Tukey's tests (a = 0.05). Statistically lower microhardness values and degradation of the resindentin bonds were only found in the C + DW group for both adhesives. The in situ model seems to be a suitable short-term methodology to investigate the degradation of the resindentin bonds under a more realistic condition. (c) 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 100B: 14661471, 2012.

Properties of dental resins submitted to pH catalysed hydrolysis

Objectives: This study evaluated the surface microhardness (SM) and roughness (SR) alterations of dental resins submitted to pH catalysed degradation regimens. Methods: Thirty discs of each TPH Spectrum (Dentsply), Z100 (3M-ESPE), or an unfilled experimental bis-GMA/TEGDMA resin were fabricated, totaling 90 specimens. Each specimen was polymerized for 40 s, finished, polished, and individually stored in deionized water at 37 degrees C for 7 days. Specimens were randomly assigned to the following pH solutions: 1.0, 6.9 or 13, and for SM or SR evaluations (n = 5). Baseline Knoop-hardness of each specimen was obtained by the arithmetic mean of five random micro-indentations. For SR, mean baseline values were obtained by five random surface tracings (R-a). Specimens were then soaked in one of the following storage media at 37 degrees C: (1) 0.1 M, pH 1.0 HCl, (2) 0.1 N, pH 13.0 NaOCl, and (3) deionized water (pH 6.9). Solutions were replaced daily. Repeated SM and SR measurements were performed at the 3-, 7- and 14-day storage time intervals. For each test and resin, data were analysed by two-way ANOVA followed by Tukey's test (alpha = 0.05). Results: There was significant decrease in SM and increase in SR values of composites after storage in alkaline medium. TPH and Z100 presented similar behaviour for SM and SR after immersion in the different media, whereas unfilled resin values showed no significant change. Conclusion: Hydrolytic degradation of resin composites seems to begin with the silanized inorganic particles and therefore depend on their composition. Significance: To accelerate composite hydrolysis and produce quick in vitro microstructural damage, alkaline medium appears to be more suitable than acidic medium. Contemporary resin composite properties seem to withstand neutral and acidic oral environments tolerably well. (C) 2012 Elsevier Ltd. All rights reserved.

Influence of ultrasound or halogen light on microleakage and hardness of enamel adjacent to glass ionomer cement

Background. The use of external sources of energy may accelerate the setting rate of glass ionomer cements (GICs) allowing better initial mechanical properties. Aim. To investigate the influence of ultrasound and halogen light on the microleakage and hardness of enamel adjacent to GIC restorations, after artificial caries challenge. Design. Cavities were prepared in 60 primary canines, restored with GIC, and randomly distributed into three groups: control group (CG), light group (LG) - irradiation with a halogen lightcuring unit for 60 s, and ultrasonic group (UG) application of ultrasonic scaler device for 15 s. All specimens were then submitted to a cariogenic challenge in a pH cycling model. Half of sample in each group were immersed in methylene blue for 4 h and sectioned for dye penetration analysis. The remaining specimens were submitted to Knoop cross-sectional microhardness assessments, and mineral changes were calculated for adjacent enamel. Results. Data were compared using Kruskal-Wallis test and two- way ANOVA with 5% significance. Higher dye penetration was observed for the UG (P < 0.01). No significant mineral changes were observed between groups (P = 0.844). Conclusion. The use of halogen light- curing unit does not seem to interfere with the properties of GICs, whereas the use of ultrasound can affect its marginal sealing.

Myocardial performance in conscious streptozotocin diabetic rats

Abstract Background In spite of a large amount of studies in anesthetized animals, isolated hearts, and in vitro cardiomyocytes, to our knowledge, myocardial function was never studied in conscious diabetic rats. Myocardial performance and the response to stress caused by dobutamine were examined in conscious rats, fifteen days after the onset of diabetes caused by streptozotocin (STZ). The protective effect of insulin was also investigated in STZ-diabetic rats. Methods Cardiac contractility and relaxation were evaluated by means of maximum positive (+dP/dtmax) and negative (-dP/dtmax) values of first derivative of left ventricular pressure over time. In addition, it was examined the myocardial response to stress caused by two dosages (1 and 15 μg/kg) of dobutamine. One-way analysis of variance (ANOVA) was used to compare differences among groups, and two-way ANOVA for repeated measure, followed by Tukey post hoc test, to compare the responses to dobutamine. Differences were considered significant if P < 0.05. Results Basal mean arterial pressure, heart rate, +dP/dtmax and -dP/dtmax were found decreased in STZ-diabetic rats, but unaltered in control rats treated with vehicle and STZ-diabetic rats treated with insulin. Therefore, insulin prevented the hemodynamic and myocardial function alterations observed in STZ-diabetic rats. Lower dosage of dobutamine increased heart rate, +dP/dtmax and -dP/dtmax only in STZ-diabetic rats, while the higher dosage promoted greater, but similar, responses in the three groups. In conclusion, the results indicate that myocardial function was remarkably attenuated in conscious STZ-diabetic rats. In addition, the lower dosage of dobutamine uncovered a greater responsiveness of the myocardium of STZ-diabetic rats. Insulin preserved myocardial function and the integrity of the response to dobutamine of STZ-diabetic rats. Conclusion The present study provides new data from conscious rats showing that the cardiomyopathy of this pathophysiological condition was expressed by low indices of contractility and relaxation. In addition, it was also demonstrated that these pathophysiological features were prevented by the treatment with insulin.

Impact of experimental Nano-HAP pastes on bovine enamel and dentin submitted to a pH cycling model

This in vitro study evaluated the preventive potential of experimental pastes containing 10% and 20% hydroxyapatite nanoparticles (Nano-HAP), with or without fluoride, on dental demineralization. Bovine enamel (n=15) and root dentin (n=15) specimens were divided into 9 groups according to their surface hardness: control (without treatment), 20 Nanop paste (20% HAP), 20 Nanop paste plus (20% HAP + 0.2% NaF), 10 Nanop paste (10% HAP), 10 Nanop paste plus (10% HAP + 0.2% NaF), placebo paste (without fluoride and HAP), fluoride paste (0.2% NaF), MI paste (CPP-ACP, casein phosphopeptide-amorphous calcium phosphate), and MI paste plus (CPP-ACP + 0.2% NaF). Both MI pastes were included as commercial control products containing calcium phosphate. The specimens were treated with the pastes twice a day (1 min), before and after demineralization. The specimens were subjected to a pH-cycling model (demineralization–6-8 h/ remineralization-16-18 h a day) for 7 days. The dental subsurface demineralization was analyzed using cross-sectional hardness (kgf/mm 2 , depth 10-220 µm). Data were tested using repeated-measures two-way ANOVA and Bonferroni's test (p<0.05). The only treatment able to reduce the loss of enamel and dentin subsurface hardness was fluoride paste (0.2% NaF), which differed significantly from the control at 30- and 50-µm depth (p<0.0001). The other treatments were not different from each other or compared with the control. The experimental Nanop pastes, regardless of the addition of fluoride, were unable to reduce dental demineralization in vitro.

SEM analysis and push-out bond strength of fiberglass posts luted with different cements of glass-ionomer in humid environment: pilot test

The objective of this study was to evaluate the push-out bond strength of fiberglass resin reinforced bonded with five ionomer cements. Also, the interface between cement and dentin was inspected by means of SEM. Fifty human canines were chose after rigorous scrutiny process, endodontically treated and divided randomly into five groups (n = 3) according to cement tested: Group I – Ionoseal (VOCO), Group II – Fugi I (GC), Group III – Fugi II Improved (GC), Group IV – Rely X Luting 2 (3M ESPE), Group V – Ketac Cem (3M ESPE). The post-space was prepared to receive a fiberglass post, which was tried before cementation process. No dentin or post surface pretreatment was carried out. After post bonding, all roots were cross-sectioned to acquire 3 thin-slices (1 mm) from three specific regions of tooth (cervical, medium and apical). A Universal test machine was used to carry out the push-out test with cross-head speed set to 0.5mm/mim. All failed specimens were observed under optical microscope to identify the failure mode. Representative specimens from each group was inspected under SEM. The data were analyzed by Kolmogorov-Smirnov and Levene’s tests and by two-way ANOVA, and Tukey’s port hoc test at a significance level of 5%. It was compared the images obtained for determination of types of failures more occurred in different levels. SEM inspection displayed that all cements filled the space between post and dentin, however, some imperfections such bubles and voids were noticed in all groups in some degree of extension. The push-out bond strength showed that cement Ketac Cem presented significant higher results when compared to the Ionoseal (P = 0.02). There were no statistical significant differences among other cements.

CCL3 and CXCL12 production in vitro by dental pulp fibroblasts from permanent and deciduous teeth stimulated by Porphyromonas gingivalis LPS

Objective: The aim of this study was to compare the production of the chemokines CCL3 and CXCL12 by cultured dental pulp fibroblasts from permanent (PDPF) and deciduous (DDPF) teeth under stimulation by Porphyromonas gingivalis LPS (PgLPS). Material and Methods: Primary culture of fibroblasts from permanent (n=3) and deciduous (n=2) teeth were established using an explant technique. After the fourth passage, fibroblasts were stimulated by increasing concentrations of PgLPS (0 – 10 µg/mL) at 1, 6 and 24 h. The cells were tested for viability through MTT assay, and production of the chemokines CCL3 and CXCL12 was determined through ELISA. Comparisons among samples were performed using One-way ANOVA for MTT assay and Two-way ANOVA for ELISA results. Results: Cell viability was not affected by the antigen after 24 h of stimulation. PgLPS induced the production of CCL3 by dental pulp fibroblasts at similar levels for both permanent and deciduous pulp fibroblasts. Production of CXCL12, however, was significantly higher for PDPF than DDPF at 1 and 6 h. PgLPS, in turn, downregulated the production of CXCL12 by PDPF but not by DDPF. Conclusion: These data suggest that dental pulp fibroblasts from permanent and deciduous teeth may present a differential behavior under PgLPS stimulation.

Effect of 2% chlorhexidine digluconate on bond strength of a glass-fibre post to root dentine

Aim: To assess the immediate influence of dentine bonding systems (DBS) associated with 2% chlorhexidine digluconate (CHX) on glass-fibre post-bond strength to root dentine, in terms of coronal, middle and apical thirds. Methodology: Sixty bovine roots were root filled and randomly assigned to 1 of 6 groups (n = 10): SBMP (3-step etch-and-rinse system, Scotchbond Multi-Purpose), SB (2-step etch-and-rinse system, Single Bond 2), SE (2-step self-etching system, Clearfil SE Bond) and SBMP-CHX, SB-CHX and SE-CHX, respectively, associated with CHX. For all groups, a glassfibre post was luted with a dual-cure resin cement, RelyX ARC. After 7-day storage, specimens were subjected to the push-out test. Failure modes were analysed under optical microscopy (40x). Bond strength values were statistically analysed by two-way ANOVA and Bonferroni tests (P < 0.05). Results: The effect of DBS was significant (P < 0.05), and SE reached higher bond strength in comparison with the other DBS tested. CHX association did not show improvement with any DBS (P > 0.05); rather, it negatively affected SE, which was detected for all thirds. There was no difference between thirds (P > 0.05), except for the SE-CHX, which presented lower values for the apical third (P < 0.05). Adhesive cement/dentine adhesive failure was predominant for all groups. CHX did not influence the failure mode for any DBS (P > 0.05). Conclusions: The performance of the dentine bonding systems was material dependent. CHX did not improve immediate bond strength; however, CHX negatively affected the bond strength of the self-etching system, especially in the third apical

Effect of denture cleansers on metal ion release and surface roughness of denture base materials

Chemical disinfectants are usually associated with mechanical methods to remove stains and reduce biofilm formation. This study evaluated the effect of disinfectants on release of metal ions and surface roughness of commercially pure titanium, metal alloys, and heat-polymerized acrylic resin, simulating 180 immersion trials. Disk-shaped specimens were fabricated with commercially pure titanium (Tritan), nickel-chromium-molybdenum-titanium (Vi-Star), nickel-chromium (Fit Cast-SB Plus), and nickel-chromium-beryllium (Fit Cast-V) alloys. Each cast disk was invested in the flasks, incorporating the metal disk to the heat-polymerized acrylic resin. The specimens (n=5) were immersed in these solutions: sodium hypochlorite 0.05%, Periogard, Cepacol, Corega Tabs, Medical Interporous, and Polident. Deionized water was used as a control. The quantitative analysis of metal ion release was performed using inductively coupled plasma mass spectrometry (ELAN DRC II). A surface analyzer (Surftest SJ-201P) was used to measure the surface roughness (µm). Data were recorded before and after the immersions and evaluated by two-way ANOVA and Tukey's test (α=0.05). The nickel release proved most significant with the Vi-Star and Fit Cast-V alloys after immersion in Medical Interporous. There was a significant difference in surface roughness of the resin (p=0.011) after immersion. Cepacol caused significantly higher resin roughness. The immersion products had no influence on metal roughness (p=0.388). It could be concluded that the tested alloys can be considered safe for removable denture fabrication, but disinfectant solutions as Cepacol and Medical Interporous tablet for daily denture immersion should be used with caution because it caused greater resin surface roughness and greater ion release, respectively.

Effect of different surface penetrating sealants on the roughness of a nanofiller composite resin

This study evaluated the effectiveness of different sealants applied to a nanofiller composite resin. Forty specimens of Filtek Z-350 were obtained after inserting the material in a 6x3 mm stainless steel mold followed by light activation for 20 s. The groups were divided (n=10) according to the surface treatment applied: Control group (no surface treatment), Fortify, Fortify Plus and Biscover LV. The specimens were subjected to simulated toothbrushing using a 200 g load and 250 strokes/min to simulate 1 week, 1, 3 and 6 months and 1 and 3 years in the mouth, considering 10,000 cycles equivalent to 1 year of toothbrushing. Oral-B soft-bristle-tip toothbrush heads and Colgate Total dentifrice at a 1:2 water-dilution were used. After each simulated time, surface roughness was assessed in random triplicate readings. The data were submitted to two-way ANOVA and Tukey's test at a 95% confidence level. The specimens were observed under scanning electron microscopy (SEM) after each toothbrushing cycle. The control group was not significantly different (p>0.05) from the other groups, except for Fortify Plus (p<0.05), which was rougher. No significant differences (p>0.05) were observed at the 1-month assessment between the experimental and control groups. Fortify and Fortify Plus presented a rougher surface over time, differing from the baseline (p<0.05). Biscover LV did not differ (p>0.05) from the baseline at any time. None of the experimental groups showed a significantly better performance (p>0.05) than the control group at any time. SEM confirmed the differences found during the roughness testing. Surface penetrating sealants did not improve the roughness of nanofiller composite resin.

Neonatally induced mild diabetes: influence on development, behavior and reproductive function of female Wistar rats

Abstract Background Neonatal STZ treatment induces a state of mild hyperglycemia in adult rats that disrupts metabolism and maternal/fetal interactions. The aim of this study was investigate the effect of neonatal STZ treatment on the physical development, behavior, and reproductive function of female Wistar rats from infancy to adulthood. Methods At birth, litters were assigned either to a Control (subcutaneous (s.c.) citrate buffer, n = 10) or STZ group, (streptozotocin (STZ) - 100 mg/kg-sc, n = 6). Blood glucose levels were measured on postnatal days (PND) 35, 84 and 120. In Experiment 1 body weight, length and the appearance of developmental milestones such as eye and vaginal opening were monitored. To assess the relative contribution of the initial and long term effects of STZ treatment this group was subdivided based on blood glucose levels recorded on PND 120: STZ hyperglycemic (between 120 and 300 mg/dl) and STZ normoglycemic (under 120 mg/dl). Behavioral activity was assessed in an open field on PND 21 and 75. In Experiment 2 estrous cyclicity, sexual behavior and circulating gonadotropin, ovarian steroid, and insulin levels were compared between control and STZ-hyperglycemic rats. In all measures the litter was the experimental unit. Parametric data were analyzed using one-way or, where appropriate, two-way ANOVA and significant effects were investigated using Tukey’s post hoc test. Fisher’s exact test was employed when data did not satisfy the assumption of normality e.g. presence of urine and fecal boli on the open field between groups. Statistical significance was set at p < 0.05 for all data. Results As expected neonatal STZ treatment caused hyperglycemia and hypoinsulinemia in adulthood. STZ-treated pups also showed a temporary reduction in growth rate that probably reflected the early loss of circulating insulin. Hyperglycemic rats also exhibited a reduction in locomotor and exploratory behavior in the open field. Mild hyperglycemia did not impair gonadotropin levels or estrous cylicity but ovarian steroid concentrations were altered. Conclusions In female Wistar rats, neonatal STZ treatment impairs growth in infancy and results in mild hyperglycemia/hypoinsulinemia in adulthood that is associated with changes in the response to a novel environment and altered ovarian steroid hormone levels.

Bonding of simplified adhesive systems to caries-affected dentin of primary teeth.

PURPOSE To evaluate the bonding of simplified adhesive systems to sound and caries-affected dentin of primary teeth with microtensile (µTBS) and nanoleakage (NL) tests. MATERIALS AND METHODS Occlusal cavities were prepared in 36 sound second primary molars. Half of the specimens were submitted to pH cycling to simulate caries-affected dentin. Teeth were randomly restored with one of three materials: the etch-and-rinse adhesive system Adper Single Bond 2 (SB), the two-step self-etching adhesive system Adper SE Plus (SE), and the one-step self-etching adhesive system Adper Easy One (EASY). After storage for 24 h, specimens with cross-sectional areas of 0.8 mm2 were prepared for microtensile testing (1 mm/min). One stick from each tooth was immersed in silver nitrate solution (24 h) and allowed to develop for 8 h in order to score the nano leakage with SEM. The fracture pattern was evaluated using a stereomicroscope (400X). The µTBS means were analyzed by two-way ANOVA and Tukey's post-hoc test. For NL, the Kruskal- Wallis and Mann-Whitney tests were used (α < 0.05). RESULTS SB (35.5 ± 3.5) showed the highest µTBS value to sound dentin, followed by EASY (26.3 ± 1.9) and SE (18.2 ± 6.5) (p < 0.05). No difference among materials was observed for caries-affected dentin (SB: 17.8 ± 4.2; SE: 13.9 ± 3.2; EASY: 14.4 ± 4.2, p > 0.05). For all groups, adhesive/mixed fracture prevailed. Caries affected dentin promoted silver nitrate uptake into the adhesive interface; however, with SE, the nano leakage was more pronounced than in the other adhesive systems, even in sound dentin. CONCLUSION Caries-affected dentin negatively influences the bond strength and nano leakage of the two-step etch-and-rinse and one-step self-etching adhesive systems tested in primary teeth.

Development and evaluation of a video-based modeling strategy for the dissemination phase of a school health tobacco -use prevention program

Even the best school health education programs will be unsuccessful if they are not disseminated effectively in a manner that encourages classroom adoption and implementation. This study involved two components: (1) the development of a videotape intervention to be used in the dissemination phase of a 4-year, NCI-funded diffusion study and (2) the evaluation of that videotape intervention strategy in comparison with a print (information transfer) strategy. Conceptualization has been guided by Social Learning Theory, Diffusion Theory, and communication theory. Additionally, the PRECEDE Framework has been used. Seventh and 8th grade classroom teachers from Spring Branch Independent School District in west Houston participated in the evaluation of the videotape and print interventions using a 57-item preadoption survey instrument developed by the UT Center for Health Promotion Research and Development. Two-way ANOVA was used to study individual score differences for five outcome variables: Total Scale Score (comprised of 57 predisposing, enabling, and reinforcing items), Adoption Characteristics Subscale, Attitude Toward Innovation Subscale, Receptivity Toward Innovation, and Reinforcement Subscale. The aim of the study is to compare the effect upon score differences of video and print interventions alone and in combination. Seventy-three 7th and 8th grade classroom teachers completed the study providing baseline and post-intervention measures on factors related to the adoption and implementation of tobacco-use prevention programs. Two-way ANOVA, in relation to the study questions, found significant scoring differences for those exposed to the videotape intervention alone for both the Attitude Toward Innovation Subscale and the Receptivity to Adopt Subscale. No significant results were found to suggest that print alone influences favorable scoring differences between baseline and post-intervention testing. One interaction effect was found suggesting video and print combined are more effective for influencing favorable scoring differences for the Reinforcement for the Adoption Subscale.^ This research is unique in that it represents a newly emerging field in health promotion communications research with implications for Social Learning Theory, Diffusion Theory, and communication science that are applicable to the development of improved school health interventions. ^

Evaluación de extractos cetónicos de paraíso, eucalipto y ricino sobre Myzus persicae (Homoptera: Aphididae)

En el cultivo de pimiento, Myzus persicae es una plaga cuyo manejo se basa en el uso de agroquímicos de síntesis. Una alternativa de menor impacto ambiental para su control es la aplicación de extractos naturales. El objetivo del trabajo fue evaluar el efecto de extractos provenientes de Melia azedarach, Eucalyptus globulus y Ricinus communis sobre este pulgón. Se escogió la técnica del film residual en papel de filtro, manteniendo los individuos sobre hojas de pimiento ornamental. Se utilizaron extractos acetónicos a una dilución de 10 000 ppm, con 5 individuos en cada una de las 10 réplicas de los tratamiento. Se efectuaron lecturas para mortalidad a los 30 minutos y 24, 48 y 72 horas. Los resultados se analizaron mediante ANOVA de medidas repetidas y prueba de Tukey. El extracto de eucalipto produjo una mortalidad significativa, alcanzando un máximo cercano al 50 % en promedio, para la lectura a las 72 horas. Asimismo se observó un efecto sobre la reproducción, generado por los extractos de eucalipto y ricino, aunque no pudo probarse esto estadísticamente. Para el ricino, se infiere un probable efecto de repelencia. Se propone continuar con los ensayos de extractos, ampliando la evaluación de su efecto sobre el potencial reproductivo del organismo blanco.

Barreras para la práctica de actividad física y deportiva en las personas adultas de la Comunidad de Madrid. Desarrollo y validación de un instrumento

El propósito de este estudio fue la construcción y validación de un instrumento de medición de barreras a la práctica de la actividad física y deportiva por parte de las personas adultas desde la teoría ecológico social y analizar la presencia de las diferentes barreras así como las innovaciones y alternativas de conciliación a las barreras relacionadas con el empleo, el cuidado de hijos e hijas y las tareas del hogar, identificando las posibles diferencias existentes en función del género y del tipo de demanda en la población adulta de la Comunidad de Madrid. Se ha realizado un estudio cuantitativo, descriptivo y transversal en una muestra representativa de la población residente en la Comunidad de Madrid entre 30 y 64 años. El tipo de muestreo fue probabilístico, de tipo polietápico según tamaño demográfico de municipio y género, con un margen de error del ± 5,27% y un intervalo de confianza del 95,5%. El tamaño de la muestra final fue de 360 personas (50,3% mujeres, 49,7% hombres), quienes completaron un cuestionario estructurado mediante entrevista personal cara a cara en su domicilio entre octubre y diciembre de 2011, que incluía una escala de barreras específica, así como sub-cuestionarios de innovaciones y alternativas de conciliación vinculados a los tres ítems relacionados con el empleo, cuidado de hijos e hijas y hogar de la escala de barreras. La escala de barreras fue completada por las personas practicantes de actividad física y deportiva que deseaban realizar otra actividad, es decir, por la Demanda Establecida, así como por las personas no practicantes pero deseosas de hacerlo o Demanda Latente, y las personas no practicantes no interesadas en practicar o Demanda Ausente (n=246). Las personas que alcanzaron elevadas puntuaciones en los tres ítems de la escala de barreras vinculados al empleo, cuidado de hijos e hijas y hogar, completaron sub-cuestionarios específicos de innovaciones y alternativas de conciliación vinculados a estas barreras. Para el estudio métrico de los ítems y la dimesionalidad de la escala de barreras se llevaron a cabo análisis descriptivos de los ítems, análisis correlacionales y análisis factoriales exploratorios (AFE). Como resultado se obtuvo una escala de barreras constituida por 13 ítems que explicaron el 59,1% de la variabilidad total de los datos, agrupados en cuatro dimensiones denominadas: Barreras Interpersonales (2 ítems), Barreras Individuales (4 ítems), Barreras Comunidad-Institucionales (4 ítems) y Barreras Obligaciones-Tiempo (3 ítems). Los datos de la escala de barreras y los sub-cuestionarios de innovaciones y alternativas de conciliación fueron analizados con el SPSS v. 18. Para la comparación de variables cuantitativas y ordinales se utilizaron ANOVAS de dos factores (género por tipo de demanda), el tamaño del efecto para esta prueba se cuantificó mediante eta cuadrado. Los resultados se expresaron como porcentajes para las variables nominales y como medias y desviaciones típicas para las variables ordinales y cuantitativas. El nivel de riesgo se fijó en 0,05. El instrumento presentó una fiabilidad aceptable (α=0,58) en consonancia con el modelo ecológico social presentando dimensiones que explicaron los niveles de influencia de las diferentes esferas. Los resultados obtenidos permitieron avalar tanto la adecuación de las propiedades psicométricas de los ítems, así como la validez y fiabilidad de la escala de barreras para la práctica de actividad física y deportiva. Los distintos análisis realizados han aportado evidencia de la validez de una estructura de cuatro dimensiones acorde a los planteamientos teóricos previos de los modelos ecológicos sociales. En la dimensión barreras Individuales se identificaron diferencias según el tipo de demanda (F2,237=40,28; p<0,001; η2=0,25) y el género (F1,237=8,72; p<0,01; η2=0,84). En la dimensión barreras Interpersonales se identificaron diferencias de género (F1,239 =14,9; p<0,01; η2=0,06) pero no entre demandas (F2,239=2,35; p>0,05; 1-β=0,47). En la dimensión Barreras Obligaciones-Tiempo se identificaron diferencias en función del tipo de demanda (F2,239=3,88; p<0,05; η2=0,03) sin presentar diferencias entre hombres y mujeres (F1,239=1,06; p>0,05; 1-β=0,18). Por último, en la dimensión Comunidad Institucionales, se identificaron diferencias en función del tipo de demanda (F2,240=5,69; p<0,01; η2=0,045) y no hubo diferencias en función del género (F1,240=0,65; p>0,05; 1-β=0,13). Las innovaciones y alternativas de conciliación relacionadas con el empleo más valoradas fueron la de flexibilidad en los horarios de trabajo y adecuación de horarios; las más valoradas relacionadas con la barrera cuidado de hijos fueron que en la instalación deportiva se ofertaran actividades físicas conjuntas, en las en las que pudiesen participar madres e hijos y que la instalación deportiva ofreciera, en el mismo horario, actividades para ellos y sus hijos, y, por último, las más valoradas en relación con las tareas del hogar, una mayor implicación de la pareja seguida por una mayor implicación de los hijos. ABSTRACT The objectives of this study were to build and validate an instrument to measure the barriers of adult people to the practice of sport and physical activities from the perspective of the social-ecological theory, analyse the presence of the different barriers, as well as the innovations and alternatives regarding conciliation with work and the care of children and home as barriers, identifying the possible differences that exist based on gender and the type of demand of the adult population within the Community of Madrid. For this, a quantitative, descriptive and transversal study was carried out on a representative sample of the resident population of the Community of Madrid, ages ranging from 30 to 64 years old. Given that is an infinite or very large population, and working with an interval of confidence of the 95,5%, and assuming in the population variance, the worst case of p equal to q, the margin of sampling error was ± 5,27. The sample consisted of 360 people (50,3% women, 49,7% men), who completed a questionnaire during face-to-face personal interviews between October and December 2011. The questionnaire included a scale of specific barriers, as well as sub-questionnaires on the innovations and alternatives linked to the three items regarding work, the care of children and home of the barriers scale. The barriers scale was completed by people who practice physical and sport activities and wanted to do other activities, i.e. by the Established Demand; by people who do not practice these activities but would like to do so, i.e. Latent Demand; and by people who do not practice these activities and have no desire to do so, i.e. Absent Demand (n=246). The people who peaked on the three items of the barriers scale regarding work, the care of children and home, then completed specific sub-questionnaires on the innovations and alternatives for conciliation related to these barriers. The metric study of the items and the dimensionality of the barriers scale was carried out through descriptive analyses of the items, as well as correlation analyses and exploratory factor analyses (EFA). This resulted in a barriers scale composed of 13 items that explained 59,1% of the total variability of the data, grouped in four dimensions as follows: Interpersonal Barriers (2 items), Individual Barriers (4 items), Community-Institutional Barriers (4 items) and Obligations-Time Barriers (3 items). The data obtained from the barriers scale and sub-questionnaires on the innovations and alternatives for conciliation were analyzed using software SPSS v. 18. Two-way ANOVA (gender by type of demand) was used for the comparison of quantitative and ordinal variables, and the effect size for this test was quantified with eta squared. The results were expressed as percentages for nominal variables, and as means and standard deviations for quantitative and ordinal variables. The level of risk was set at 0,05. The instrument showed an acceptable reliability (α=0,58) in line with the social-ecological model, providing dimensions that explained the influence levels of the different spheres. The results obtained establish both the adaptation of the psychometric properties of the items, and the validity and reliability of the barriers scale for the practice of physical and sport activities. The different analyses have supported the validity of a four-dimensional structure consistent with the previous theoretical approaches on the social-ecological models, while showing adequate statistical indices. The differences identified in the Individual Barriers dimension were based on the type of demand (F2,237=40,28; p<0,001; η2=0,25) and gender (F1,237=8,72; p<0,01; η2=0,84). The differences identified in the Interpersonal Barriers dimension were based on gender (F1,239 =14,9; p<0,01; η2=0,06) but not on demand (F2,239=2,35; p>0,05; 1-β=0,47). The differences identified for the Obligations-Time Barriers dimension were based on the type of demand (F2,239=3,88; p<0,05; η2=0,03) and did not show differences between men and women (F1,239=1,06; p>0,05; 1-β=0,18). Finally, the differences identified for the Community-Institutional Barriers dimension were based on the type of demand (F2,240=5,69; p<0,01; η2=0,045) and provided no differences based on gender (F1,240=0,65; p>,05; 1-β=0,13). The most valued innovations and alternatives for conciliation regarding work were the adaptation and flexibility of working hours and timetables; the most valued related to the care of children were the offer of joint activities for adults and children in sport centres, as well as separate activities within the same timetable; and, finally, the most valued regarding the home was a higher degree of participation and involvement on the part of the spouse or partner, followed by a higher degree of participation and involvement on the part of the children.