Spatial and temporal characteristics of rain intensity in the peninsular Malaysia using TRMM rain rate

The present study is focused on the intensity distribution of rainfall in different classes and their contribution to the total seasonal rainfall. In addition, we studied the spatial and diurnal variation of the rainfall in the study areas. For the present study, we retrieved data from TRMM (Tropical Rain Measuring Mission) rain rate available in every 3 h temporal and 25 km spatial resolutions. Moreover, station rainfall data is used to validate the TRMM rain rate and found significant correlation between them (linear correlation coefficients are 0.96, 0.85, 0.75 and 0.63 for the stations Kota Bharu, Senai, Cameron highlands and KLIA, respectively). We selected four areas in the Peninsular Malaysia and they are south coastal, east coastal, west coastal and highland regions. Diurnal variation of frequency of rain occurrence is different for different locations. We noticed bimodal variation in the coastal areas in most of the seasons and unimodal variation in the highland/inland area. During the southwest monsoon period in the west coastal stations, there is no distinct diurnal variation. The distribution of different intensity classes during different seasons are explained in detail in the results

Long term trends of seasonal and monthly rainfall in different intensity ranges over Indian subcontinent

In general Indian summer monsoon rainfall did not show any significant trend in all Indian summer monsoon rainfall series, however, it was reported that the ISMR is subjected to spatial trends. This paper made an attempt to bring out long term trends of different intensity classes of summer monsoon rainfall in different regions of Indian subcontinent. The long term trend of seasonal and monthly rainfall were also made using the India Meteorological Department gridded daily rainfall data with a spatial resolution of 1° × 1° latitude-longitude grid for the period from 1st January, 1901 to 31st December, 2003. The summer monsoon rainfall shows an increasing trend in southeast, northwest and northeast regions, whereas decreasing trend in the central and west coastal regions. In monthly scale, July rainfall shows decreasing trend over west coastal and central Indian regions and significant increasing trend over northeast region at 0.1% significant level. During the month August, decreasing trend is observed in the west coastal stations at 10% significant level. In most of the stations, mean daily rainfall shows an increasing trend for low and very high intense rainfall. For the moderate rainfall, the trend is different for different regions. In the central and southern regions the trend of moderate and moderately high classes show increasing trend. And for the high and very high intensity classes, the trend is decreasing significantly. In the northeastern regions, above 10 mm/day rainfall shows significantly increasing trend with 0.1% significant level.

A New Gridding Technique for High Density Microarray Images Using Intensity Projection Profile of Best Sub Image

As the technologies for the fabrication of high quality microarray advances rapidly, quantification of microarray data becomes a major task. Gridding is the first step in the analysis of microarray images for locating the subarrays and individual spots within each subarray. For accurate gridding of high-density microarray images, in the presence of contamination and background noise, precise calculation of parameters is essential. This paper presents an accurate fully automatic gridding method for locating suarrays and individual spots using the intensity projection profile of the most suitable subimage. The method is capable of processing the image without any user intervention and does not demand any input parameters as many other commercial and academic packages. According to results obtained, the accuracy of our algorithm is between 95-100% for microarray images with coefficient of variation less than two. Experimental results show that the method is capable of gridding microarray images with irregular spots, varying surface intensity distribution and with more than 50% contamination

Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Highly Sensitive Sensor Based On Intracavity Laser Absorption Spectroscopy By Means of Relative Intensity Noise

This thesis concerns with the main aspects of medical trace molecules detection by means of intracavity laser absorption spectroscopy (ICLAS), namely with the equirements for highly sensitive, highly selective, low price, and compact size sensor. A novel two modes semiconductor laser sensor is demonstrated. Its operation principle is based on the competition between these two modes. The sensor sensitivity is improved when the sample is placed inside the two modes laser cavity, and the competition between the two modes exists. The effects of the mode competition in ICLAS are discussed theoretically and experimentally. The sensor selectivity is enhanced using external cavity diode laser (ECDL) configuration, where the tuning range only depends on the external cavity configuration. In order to considerably reduce the sensor cost, relative intensity noise (RIN) is chosen for monitoring the intensity ratio of the two modes. RIN is found to be an excellent indicator for the two modes intensity ratio variations which strongly supports the sensor methodology. On the other hand, it has been found that, wavelength tuning has no effect on the RIN spectrum which is very beneficial for the proposed detection principle. In order to use the sensor for medical applications, the absorption line of an anesthetic sample, propofol, is measured. Propofol has been dissolved in various solvents. RIN has been chosen to monitor the sensor response. From the measured spectra, the sensor sensitivity enhancement factor is found to be of the order of 10^(3) times of the conventional laser spectroscopy.

Effects of tillage intensity on soil C, N, and P pools with different stability

Es ist bekannt, dass die Umsatzdynamik der organischen Substanz von der Bodenbearbeitungsintensität abhängt. Bis jetzt sind nur wenige Daten zum Einfluss der Bearbeitungsintensität und des Zwischenfruchtanbaus auf C-, N-, und P-Dynamik im Ober- (0-5 cm Tiefe) und Unterboden (5-25 cm Tiefe) von Lössböden verfügbar. Hauptziele dieser Arbeit waren die (i) Quantifizierung des Einflusses von verschiedenen langzeitig durchgeführten Bearbeitungssystemen auf labile, intermediäre, und passive C- und N-Pools; (ii) Quantifizierung des Einflusses dieser Systeme auf P-Fraktionen mit unterschiedlicher Verfügbarkeit für die Pflanzenaufnahme; (iii) Quantifizierung des Einflusses des Zwischenfruchtanbaus in Verbindung mit einer unterschiedlichen Einarbeitungstiefe der der Zwischenfrüchte auf mineralisierbares C und N. Die Ergebnisse des 1. und 2. Teilexperiments basieren auf Untersuchungen von 4 Langzeitfeldexperimenten (LFE) in Ost- und Süddeutschland, die zwischen 1990 und 1997 durch das Institut für Zuckerrübenforschung angelegt wurden. Jedes LFE umfasst 3 Bearbeitungssysteme: konventionelle Bearbeitung (CT), reduzierte Bearbeitung (RT) und Direktsaat (NT). Die Ergebnisse des 3. Teilexperiments basieren auf einem Inkubationsexperiment. Entsprechend den Hauptfragestellungen wurden folgende Untersuchungsergebnisse beschrieben: (i) Im Oberboden von NT wurden höhere labile C-Vorräte gefunden (C: 1.76 t ha-1, N: 166 kg ha-1), verglichen mit CT (C: 0.44 t ha-1, N: 52 kg ha-1). Im Gegensatz dazu waren die labile- C-Vorräte höher im Unterboden von CT mit 2.68 t ha-1 verglichen zu NT mit 2 t ha-1 und RT mit 1.87 t ha-1. Die intermediären C-Vorräte betrugen 73-85% der gesamten organischen C-Vorräte, intermediäre N-Vorräte betrugen 70-95% des Gesamt-N im Ober- und Unterboden und waren vielfach größer als die labilen und passiven C- und N-Vorräte. Nur im Oberboden konnte ein Effekt der Bearbeitungsintensität auf die intermediären N-Pools mit höheren Vorräten unter NT als CT festgestellt werden. Die passiven C- und N-Pools waren eng mit den mineralischen Bodeneigenschaften verbunden und unabhängig vom Bearbeitungssystem. Insgesamt hat sich gezeigt, dass 14 bis 22 Jahre durchgängige Direktsaatverfahren nur im Oberboden zu höheren labilen C- und N-Vorräten führen, verglichen zu konventionellen Systemen. Dies lässt eine tiefenabhängige Stärke der Dynamik der organischen Bodensubstanz vermuten. (ii) Die Konzentration des Gesamt-P (Pt) im Oberboden war höher in NT (792 mg kg-1) und ~15% höher als die Pt-Konzentration in CT (691 mg kg 1). Die Abnahme der Pt-Konzentration mit zunehmender Bodentiefe war höher in NT als in CT. Dies gilt auch für die einzelnen P-Fraktionen, ausgenommen der stabilsten P-Fraktion (residual-P). Generell hatte das Bearbeitungssystem nur einen kleinen Einfluss auf die P-Konzentration mit höheren Pt-Konzentrationen in Böden unter NT als CT. Dies resultiert vermutlich aus der flacheren Einarbeitung der Pflanzenreste als in CT. (iii) Im Zwischenfruchtexperiment war der Biomassezuwachs von Senf am höchsten und nimmt in der Reihenfolge ab (oberirdischer Ertrag in t / ha): Senf (7.0 t ha-1) > Phacelia (5.7 t ha-1) > Ölrettich (4.4 t ha-1). Damit war potentiell mineralisierbares C und N am höchsten in Böden mit Senfbewuchs. Kumulative CO2- und N2O-Emissionen während der Inkubation unterschieden sich nicht signifikant zwischen den Zwischenfruchtvarianten und waren unabhängig von der Verteilung der Pflanzenreste im Boden. Die kumulativen ausgewaschenen mineralisierten N (Nmin)-Vorräte waren in den brachliegenden Böden am höchsten. Die Nmin-Vorräte waren 51-72% niedriger in den Varianten mit Zwischenfrucht und Einarbeitung verglichen zur Brache. In den Varianten ohne Einarbeitung waren die Nmin-Vorräte 36-55% niedriger verglichen zur Brache. Dies weißt auf einen deutlichen Beitrag von Zwischenfrüchten zur Reduzierung von Nitrat-Auswaschung zwischen Winter und Frühjahr hin. Insgesamt führte reduzierte Bearbeitung zu einer Sequestrierung von C und N im Boden und der Zwischenfruchtanbau führte zu reduzierten N-Verlusten. Die P-Verfügbarkeit war höher unter Direktsaat verglichen zur konventionellen Bearbeitung. Diese Ergebnisse resultieren aus den höheren Konzentrationen der OS in den reduzierten, als in den konventionellen Systemen. Die Ergebnisse zeigen deutlich das Potential von reduzierter Bearbeitung zur Sequestrierung von intermediärem C und N zur Reduzierung von klimarelevanten Treibhausgasen. Gleichzeitig steigen die Konzentrationen an pflanzenverfügaren P-Gehalten. Zwischenfrüchte führen auch zu einem Anstieg der C- und N-Vorräte im Boden, offensichtlich unabhängig von der Zwischenfruchtart.

Knowledge Building in Landscape Architecture

The objective of this study was to develop an internet-based seminar framework applicable for landscape architecture education. This process was accompanied by various aims. The basic expectation was to keep the main characteristics of landscape architecture education also in the online format. On top of that, four further objectives were anticipated: (1) training of competences for virtual team work, (2) fostering intercultural competence, (3) creation of equal opportunities for education through internet-based open access and (4) synergy effects and learning processes across institutional boundaries. This work started with the hypothesis that these four expected advantages would compensate for additional organisational efforts caused by the online delivery of the seminars and thus lead to a sustainable integration of this new learning mode into landscape architecture curricula. This rationale was followed by a presentation of four areas of knowledge to which the seminar development was directly related (1) landscape architecture as a subject and its pedagogy, (2) general learning theories, (3) developments in the ICT sector and (4) wider societal driving forces such as global citizenship and the increase of open educational resources. The research design took the shape of a pedagogical action research cycle. This approach was constructive: The author herself is teaching international landscape architecture students so that the model could directly be applied in practice. Seven online seminars were implemented in the period from 2008 to 2013 and this experience represents the core of this study. The seminars were conducted with varying themes while its pedagogy, organisation and the technological tools remained widely identical. The research design is further based on three levels of observation: (1) the seminar design on the basis of theory and methods from the learning sciences, in particular educational constructivism, (2) the seminar evaluation and (3) the evaluation of the seminars’ long term impact. The seminar model itself basically consists of four elements: (1) the taxonomy of learning objectives, (2) ICT tools and their application and pedagogy, (3) process models and (4) the case study framework. The seminar framework was followed by the presentation of the evaluation findings. The major findings of this study can be summed up as follows: Implementing online seminars across educational and national boundaries was possible both in term of organisation and technology. In particular, a high level of cultural diversity among the seminar participants has definitively been achieved. However, there were also obvious obstacles. These were primarily competing study commitments and incompatible schedules among the students attending from different academic programmes, partly even in different time zones. Both factors had negative impact on the individual and working group performances. With respect to the technical framework it can be concluded that the majority of the participants were able to use the tools either directly without any problem or after overcoming some smaller problems. Also the seminar wiki was intensively used for completing the seminar assignments. However, too less truly collaborative text production was observed which could be improved by changing the requirements for the collaborative task. Two different process models have been applied for guiding the collaboration of the small groups and both were in general successful. However, it needs to be said that even if the students were able to follow the collaborative task and to co-construct and compare case studies, most of them were not able to synthesize the knowledge they had compiled. This means that the area of consideration often remained on the level of the case and further reflections, generalisations and critique were largely missing. This shows that the seminar model needs to find better ways for triggering knowledge building and critical reflection. It was also suggested to have a more differentiated group building strategy in future seminars. A comparison of pre- and post seminar concept maps showed that an increase of factual and conceptual knowledge on the individual level was widely recognizable. Also the evaluation of the case studies (the major seminar output) revealed that the students have undergone developments of both the factual and the conceptual knowledge domain. Also their self-assessment with respect to individual learning development showed that the highest consensus was achieved in the field of subject-specific knowledge. The participants were much more doubtful with regard to the progress of generic competences such as analysis, communication and organisation. However, 50% of the participants confirmed that they perceived individual development on all competence areas the survey had asked for. Have the additional four targets been met? Concerning the competences for working in a virtual team it can be concluded that the vast majority was able to use the internet-based tools and to work with them in a target-oriented way. However, there were obvious differences regarding the intensity and activity of participation, both because of external and personal factors. A very positive aspect is the achievement of a high cultural diversity supporting the participants’ intercultural competence. Learning from group members was obviously a success factor for the working groups. Regarding the possibilities for better accessibility of educational opportunities it became clear that a significant number of participants were not able to go abroad during their studies because of financial or personal reasons. They confirmed that the online seminar was to some extent a compensation for not having been abroad for studying. Inter-institutional learning and synergy was achieved in so far that many teachers from different countries contributed with individual lectures. However, those teachers hardly ever followed more than one session. Therefore, the learning effect remained largely within the seminar learning group. Looking back at the research design it can be said that the pedagogical action research cycle was an appropriate and valuable approach allowing for strong interaction between theory and practice. However, some more external evaluation from peers in particular regarding the participants’ products would have been valuable.

Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays

Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition techniques which has been used are Plasma Enhanced Chemical Vapor Deposition (PECVD), Physical Vapor Deposition (PVD) and Ion Beam Sputter Deposition (IBSD). The thickness of the SiO2 thin layer was kept constant at 150nm for each deposition process. The surface roughness was measured by Stylus Profilometry and Atomic Force Microscopy (AFM). It was found that the layer which was deposited by IBSD has got the minimum surface roughness value and the layer which was deposited by PECVD process has the highest surface roughness value. During the same investigation, the substrate temperature of PECVD was varied from 80° C to 300° C with the step size of 40° C and it was found that the surface roughness keeps on increasing as the substrate holder temperature increases in the PECVD process. A new insulation layer system was proposed to minimize the dielectric breakdown effect in insulation layer for micromirror arrays. The conventional bilayer system was replaced by five layer system but the total thickness of insulation layer remains the same. It was found that during the actuation of micromirror arrays structure, the dielectric breakdown effect was reduced considerably as compared to the bilayer system. In the second step the fabrication process of the micromirror arrays was successfully adapted and transferred from glass substrates to the flexible PEN substrates by optimizing the conventional process recipe. In the last section, a large module of micromirror arrays was fabricated by electrically interconnecting four 10cm×10cm micromirror modules on a glass pane having dimensions of 21cm×21cm.

Design and Control of an Anthropomorphic Robotic Finger with Multi-point Tactile Sensation

The goal of this research is to develop the prototype of a tactile sensing platform for anthropomorphic manipulation research. We investigate this problem through the fabrication and simple control of a planar 2-DOF robotic finger inspired by anatomic consistency, self-containment, and adaptability. The robot is equipped with a tactile sensor array based on optical transducer technology whereby localized changes in light intensity within an illuminated foam substrate correspond to the distribution and magnitude of forces applied to the sensor surface plane. The integration of tactile perception is a key component in realizing robotic systems which organically interact with the world. Such natural behavior is characterized by compliant performance that can initiate internal, and respond to external, force application in a dynamic environment. However, most of the current manipulators that support some form of haptic feedback either solely derive proprioceptive sensation or only limit tactile sensors to the mechanical fingertips. These constraints are due to the technological challenges involved in high resolution, multi-point tactile perception. In this work, however, we take the opposite approach, emphasizing the role of full-finger tactile feedback in the refinement of manual capabilities. To this end, we propose and implement a control framework for sensorimotor coordination analogous to infant-level grasping and fixturing reflexes. This thesis details the mechanisms used to achieve these sensory, actuation, and control objectives, along with the design philosophies and biological influences behind them. The results of behavioral experiments with a simple tactilely-modulated control scheme are also described. The hope is to integrate the modular finger into an %engineered analog of the human hand with a complete haptic system.

Technological convergence: a strategic perspective

The information and communication technologies (ICT) sectors are in a process of technological convergence. Determinant factors in this process are the liberalisation of the telecommunications markets and technological change. Many firms are engaged in a process of mergers and alliances to position themselves in this new framework. Technological and demand uncertainties are very important. Our objective in this paper is to study the economic determinants of the strategies of the firms. With this aim, we review some key technological and demand aspects. We shed some light on the strategic motivations of the firms by establishing a parallel with the evolution of the retailing sector

Biased Technological Change, Impatience and Welfare

En este artículo utilizamos un modelo de generaciones traslapadas con heterogeneidad en la tasa de impaciencia para mostrar que los efectos de un cambio tecnológico aumentador de capital no son simétricos en los agentes y pueden conllevar una reducci on en el consumo. La asimetría en la tasa de impaciencia de los agentes en un período, tiene consecuencias sobre los beneficios del cambio tecnológico para las generaciones futuras. Menores tasas de impaciencia llevan a mayores niveles de capital y de consumo, si se entiende que la economía tiene el suficiente nivel de capital per capita.

Recognition of static and dynamic facial expressions: Influences of sex, type and intensity of emotion

Ecological validity of static and intense facial expressions in emotional recognition has been questioned. Recent studies have recommended the use of facial stimuli more compatible to the natural conditions of social interaction, which involves motion and variations in emotional intensity. In this study, we compared the recognition of static and dynamic facial expressions of happiness, fear, anger and sadness, presented in four emotional intensities (25 %, 50 %, 75 % and 100 %). Twenty volunteers (9 women and 11 men), aged between 19 and 31 years, took part in the study. The experiment consisted of two sessions in which participants had to identify the emotion of static (photographs) and dynamic (videos) displays of facial expressions on the computer screen. The mean accuracy was submitted to an Anova for repeated measures of model: 2 sexes x [2 conditions x 4 expressions x 4 intensities]. We observed an advantage for the recognition of dynamic expressions of happiness and fear compared to the static stimuli (p < .05). Analysis of interactions showed that expressions with intensity of 25 % were better recognized in the dynamic condition (p < .05). The addition of motion contributes to improve recognition especially in male participants (p < .05). We concluded that the effect of the motion varies as a function of the type of emotion, intensity of the expression and sex of the participant. These results support the hypothesis that dynamic stimuli have more ecological validity and are more appropriate to the research with emotions.

Labor supply, biased technological change and economic growth

Se utiliza un modelo de innovaciones sesgadas para estudiar los efectos de cambios exógenos en la oferta laboral. En un contexto de innovaciones sesgadas, a medida que las economías acumulan capital, el trabajo se hace relativamente más escaso y más caro, por este motivo, hay incentivos para adoptar tecnologías ahorradoras de trabajo. Del mismo modo un cambio en la oferta laboral afecta la abundancia de factores y sus precios relativos. En general, una reducción de la oferta laboral, hace que el trabajo sea más caro y genera incentivos para cambio tecnológico ahorrador de trabajo. Así, el efecto inicial que tiene el cambio en la oferta laboral sobre los precios de los factores es mitigado por el cambio tecnológico. Finalmente, los movimientos en la remuneración a los factores afectan las decisiones de ahorro y, por lo tanto, la dinámica del crecimiento. En este trabajo se exploran las consecuencias de una reducción de la oferta laboral en dos contextos teóricos diferentes: un modelo de agentes homogéneos y horizonte infinito y un modelo de generaciones traslapadas.

Biased technological change, human capital and factor shares

We propose a one-good model where technological change is factor saving and costly. We consider a production function with two reproducible factors: physical capital and human capital, and one not reproducible factor. The main predictions of the model are the following: (a) The elasticity of output with respect to the reproducible factors depends on the factor abundance of the economies. (b) The income share of reproducible factors increases with the stage of development. (c) Depending on the initial conditions, in some economies the production function converges to AK, while in other economies long-run growth is zero. (d) The share of human factors (raw labor and human capital) converges to a positive number lower than one. Along the transition it may decrease, increase or remain constant.

Educational failure in Spain : evolution, intensity and determinants. 'Fracaso escolar en España : evolución, intensidad y factores determinantes'.

Resumen basado en el de la publicación