Spectral measurement of diode lasers with a single-mode birefringent fibre

A new, and very simple spectrometer based on birefringent fiber is described. A resolution of 0.02 angstrom has been achieved, and the system has been used to measure diode laser chirp. A length of 10km of fiber would be sufficient to resolve single mode line widths.

中国古牡丹资源调查及衰老相关研究

牡丹（Paeonia suffruticosa Andr.）是芍药科芍药属牡丹组植物，花大、色艳、型美、香郁、药用范围广、文化内涵丰富，被尊为“国色天香”、“花中之王”。我国植牡丹、赏牡丹有1600多年的历史，培育了许多价值高的品种，遗憾的是个别黄色、鲜红色、绿色等珍贵品种不断消失，而且现有的一些文化价值与观赏价值极高的古牡丹、著名的牡丹园的老牡丹均出现了衰弱现象，有的已奄奄一息。为了探索传统牡丹品种消失及牡丹衰老的原因，本研究在充分调查、整理国内品种资源的基础上，总结了牡丹品种的传承和消失情况，掌握了古牡丹的资源状况。通过连作土壤栽培试验证明了牡丹连作障碍的存在，并选定了生长在同一区域的5、10、15、20、25、30年生6个株龄的‘洛阳红（Luo Yang Hong）’为研究对象，从形态指标的调查、生理指标的测定、根际土壤及根系浸提液的化感成分分析三个方面着手，确定了牡丹开始衰老的时期;揭示了牡丹衰老机理;总结了古牡丹保留、复壮、养护办法;为牡丹专类园的管理及可持续性发展提供了理论和技术指导。本研究主要结果如下： 1、牡丹品种和古牡丹资源 通过对中国牡丹品种资源的文献查阅和实地考察，系统整理了我国不同时代的品种状况，调查结果表明：宋、元、明、清共有品种1109种，目前仅存143种，品种资源消失十分严重。收集整理了49处古牡丹资料，并据此绘制了我国目前古牡丹分布图;实地调查了17处24株古牡丹，详细介绍了部分品种的来历传说、生长状况和衰亡原因。5个优良传统品种在中国科学院植物研究所牡丹种质资源圃内得以保存，其中潞城古牡丹，植株最大（高2.3 m，冠径5.6 m），且生长旺盛;西溪牡丹属丰花品种，40年植株可开花811朵。 2、牡丹连作障碍 利用牡丹连作根际土壤及其浸出液栽培牡丹，结果表明，播种苗及分株苗的生长均受到了抑制;连作年限越久的处理抑制作用越强;根际土壤浸出液对牡丹生长的影响较大，对前期地下部和后期地上部都有很强的抑制作用，而且还抑制了上胚轴休眠的解除;根际土壤对后期株高和展叶幅的影响较大，对播种苗前期生根影响不大。牡丹存在连作障碍现象，连作障碍是牡丹衰弱的重要原因。 3、牡丹衰老时间及机理 通过对6 个株龄‘洛阳红’的形态、生理指标及根际土壤化感成分的比较得出，牡丹在同一地方大约栽植15 年后开始衰弱，20 年以内应该采取复壮措施。利用气相色谱—质谱联用技术（Gas Chromatograph-Mass Spectrometer, GC-MS）检测到根际土壤及根系浸提液中主要存在：烷烃、烯烃、芳香烃、醇、醚、酚醌、有机酸、醛、酮、酯、苯、胺等12 类有机物。对比分析得出有12 种物质可能是根系分泌物，根际土壤中可能具毒害作用的物质有40 种，栽植牡丹使土壤中增加的物质有24 种。 4、古牡丹复壮技术及应用 栽培基质中添加活性炭、沙子、麦饭石等均能有效的促进牡丹的生长，以活性炭的效果最好。对“汉牡丹”实施了综合复壮措施，效果明显。

The deposition of small particles from a turbulent air flow in a curved duct

The paper describes an experimental and theoretical study of the deposition of small spherical particles from a turbulent air flow in a curved duct. The objective was to investigate the interaction between the streamline curvature of the primary flow and the turbulent deposition mechanisms of diffusion and turbophoresis. The experiments were conducted with particles of uranine (used as a fluorescent tracer) produced by an aerosol generator. The particles were entrained in an air flow which passed vertically downwards through a long straight channel of rectangular cross-section leading to a 90° bend. The inside surfaces of the channel and bend were covered with tape to collect the deposited particles. Following a test run the tape was removed in sections, the uranine was dissolved in sodium hydroxide solution and the deposition rates established by measuring the uranine concentration with a luminescence spectrometer. The experimental results were compared with calculations of particle deposition in a curved duct using a computer program that solved the ensemble-averaged particle mass and momentum conservation equations. A particle density-weighted averaging procedure was used and the equations were expressed in terms of the particle convective, rather than total, velocity. This approach provided a simpler formulation of the particle turbulence correlations generated by the averaging process. The computer program was used to investigate the distance required to achieve a fully-developed particle flow in the straight entry channel as well as the variation of the deposition rate around the bend. The simulations showed good agreement with the experimental results. © 2012 Elsevier Ltd.

Spectroscopy of neutron-rich Dy168,170: Yrast band evolution close to the NpNn valence maximum

The yrast sequence of the neutron-rich dysprosium isotope Dy168 has been studied using multinucleon transfer reactions following collisions between a 460-MeV Se82 beam and an Er170 target. The reaction products were identified using the PRISMA magnetic spectrometer and the γ rays detected using the CLARA HPGe-detector array. The 2+ and 4+ members of the previously measured ground-state rotational band of Dy168 have been confirmed and the yrast band extended up to 10+. A tentative candidate for the 4+→2+ transition in Dy170 was also identified. The data on these nuclei and on the lighter even-even dysprosium isotopes are interpreted in terms of total Routhian surface calculations and the evolution of collectivity in the vicinity of the proton-neutron valence product maximum is discussed. © 2010 The American Physical Society.

Gamma-ray spectroscopy at TRIUMF-ISAC

The 8π spectrometer at TRIUMF-ISAC consists of 20 Compton-suppressed germanium detectors and various auxiliary devices. The Ge array, once used for studies of nuclei at high angular momentum, has been transformed into the world's most powerful device dedicated to radioactive-decay studies. Many improvements in the spectrometer have been made, including a high-throughput data acquisition system, installation of a moving tape collector, incorporation of an array of 20 plastic scintillators for β-particle tagging, 5 Si(Li) detectors for conversion electrons, and 10 BaF2 detectors for fast-lifetime measurements. Experiments can be performed where data from all detectors are collected simultaneously, resulting in a very detailed view of the nucleus through radioactive decay. A number of experimental programmes have been launched that take advantage of the versatility of the spectrometer, and the intense beams available at TRIUMF-ISAC. © 2006 American Institute of Physics.

High-resolution γ-ray spectroscopy: A versatile tool for nuclear β-decay studies at TRIUMF-ISAC

High-resolution γ-ray spectroscopy is essential to fully exploit the unique, high-quality beams available at the next generation of radioactive ion beam facilities such as the TRIUMF isotope separator and accelerator (ISAC). The 8π spectrometer, which consists of 20 Compton-suppressed HPGe detectors, has recently been reconfigured for a vigorous research programme in weak interaction and nuclear structure physics. With the addition of a variety of ancillary detectors it has become the world's most powerful device dedicated to β-decay studies. This paper provides a brief overview of the apparatus and highlights from recent experiments. © 2005 IOP Publishing Ltd.

Discovery of a new 2.3 s isomer in neutron-rich 174Tm

A new program of K-isomer research has been initiated with the 8π spectrometer sited at the ISAC facility of TRIUMF. We discuss in this paper the identification of a new 2.3 s isomer in 174Tm and its implications. © Società Italiana di Fisica / Springer-Verlag 2005.

Polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs), polybrominated diphenyl ethers (PBDEs), and polychlorinated biphenyls (PCBs) monitored by tree bark in an E-waste recycling area

To investigate the environmental levels and profiles of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polybrominated diphenyl ethers (PBDEs), and polychlorinated biphenyls (PCBs), tree bark samples (n = 22) were collected from Luqiao, an E-waste recycling area, in east China in July 11-13, 2006. The average concentrations of PCDD/Fs, PBDEs, and PCBs determined by isotope dilution-high resolution gas chromatography (HRGC) coupled with high resolution mass spectrometer (HRMS) were 0.1 +/- 0.0, 1.4 +/- 0.2, and 6.5 +/- 0.8 lg g (1) lipid weight, respectively. PCDD/F-toxic equivalent (TEQ, WHO-1998), PCB-TEQs, and total dioxin-like TEQs were 1.3 +/- 0.1, 0.5 +/- 0.0, and 1.8 +/- 0.2 ng g (1) lipid weight, respectively. The profiles of these pollutants in the tree bark were also discussed. Tetra-CDFs, deca-BDE and tri-CBs were the main homologues and accounted for 47% of total PCDD/Fs, 79.3% of total PBDEs, and 33.2% of total PCBs, respectively; As for TEQs, 2,3,4,7,8-PeCDF and PCB126 were the main contributors and accounted for 36% of the total PCDD/F-TEQs and 81.2% of the total PCB-TEQs, respectively. High accumulation of PCDD/Fs, PBDEs, and PCBs detected in the tree bark indicated heavy contaminations of these pollutants in Luqiao area. (C) 2008 Elsevier Ltd. All rights reserved.

Design and modeling of an integrated device for acoustic resonance spectroscopy

This paper investigates the design and modelling of an integrated device for acoustic resonance spectroscopy (ARS). Miniaturisation of such platforms can be achieved using MEMS technology thereby enabling scaling of device dimensions to investigate smaller specimens while simultaneously operating at higher frequencies. We propose an integrated device where the transducers are mounted in close proximity with the specimen to be analysed (e.g. by integrating ultrasound transducers within a microfluidic channel). A finite element (FE) model and a simplified analytical model have been constructed to predict the acoustic response of a sample embedded in such a device configuration. A FE simulation is performed in COMSOL by embedding the piezoelectric transducers in representative fluid media. Resonant frequencies associated with the measurement can be extracted from this data. The response of various media modelled through FEA matches with analytical predictions for a range of biological media. A variety of biological media may be identified by using the measured resonant frequencies as a signature of relevant physical characteristics. The paper establishes the modelling basis of an integrated acoustic resonant spectrometer that is then applied to examine the impact of geometrical scaling on system resolution. © 2013 IEEE.

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in surface sediment and bivalve from the Changjiang Estuary, China

Surface sediments and bivalves were collected from the Changjiang Estuary in December 2003 and November 2004, respectively. Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in these samples were measured with high-resolution chromatography (HRGC)/High Resolution Mass Spectrometer (HRMS). The concentrations of total PCDD/Fs and toxic equivalent (TEQ) were 169.83 +/- 119.63 and 0.81 +/- 0.36 pg/g dry weight (dw) in sediments, and 580.33 +/- 240.17 and 7.24 +/- 3.65 pg/g dw in bivalves. The homolog compositions of PCDD/Fs were similar among samples, the most abundant congener was octa-chlorinated dibenzo-p-dioxin (OCDD) and then octa-chlorinated dibenzofuran (OCDF) and 1,2,3,4,6,7,8-hepta-chlorinated dibenzo-p-dioxin (HOCDD). The herbicide pentachlorophenol (PCP) and sodium pentachlorophenol (Na-PCP) were proved the main source of PCDD/Fs in this area.

Preferential orientation growth of AIN thin films on Si (111) substrates by LP-MOCVD

Aluminum nitride (AIN) thin films were deposited on Si (111) substrates by low pressure metalorganic chemical vapor deposition system. The effects of the V/III ratios on the film structure and surface morphology were systematically studied. The chemical states and vibration modes of AIN films were characterized by X-ray photoelectron spectroscopy and Fourier transform infrared spectrometer. The optical absorption property of the AIN films, characterized by ultraviolet-visible-near infrared spectrophotometer, exhibited a sharp absorption near the wavelength of 206 mm. The AIN (002) preferential orientation growth was obtained at the V/III ratio of 10,000 and the preferential growth mechanism is presented in this paper according to the thermodynamics and kinetics process of the AIN growth.

Ga1-xMnxSb grown on GaSb substrate by liquid phase epitaxy

The Gal(1-x)Mn(x)Sb epilayer was prepared on the n-type GaSb substrate by liquid phase epitaxy. The structure of the Gal(1-x)Mn(x)Sb epilayer was analyzed by double-crystal X-ray diffraction. From the difference of the lattice constant between the GaSb substrate and the Ga1-xMnxSb epilayer, the Mn content in the Ga1-xMnxSb epilayer were calculated as x = 0.016. The elemental composition of Ga1-xMnxSb epilayer was analyzed by energy dispersive spectrometer. The carrier concentration was obtained by Hall measurement. The hole concentration in the Ga1-xMnxSb epilayer is 4.06 x 10(19)cm(-3). It indicates that most of the Mn atoms in Ga1-xMnxSb take the site of Ga, and play a role of acceptors. The current-voltage curve of the Ga1-xMnxSb/GaSb heterostructure was measured, and the rectifying effect is obvious. (C) 2003 Elsevier B.V. All rights reserved.

Metal alloy and monoelemental nanoclusters in silica formed by sequential ion implantation and annealing in selected atmosphere

The preparation of metal alloy and monoelemental nanoclusters in silica by Ag, Cu ion sequential implantation and annealing in selected oxidizing or reducing atmosphere is studied. The formation of metastable Ag-Cu alloy is verified in the as-implanted samples by optical absorption spectra, selected area electron diffraction and energy dispersive spectrometer spectrum. The alloy is discomposed at elevated annealing temperature in both oxidizing and reducing atmospheres. The different effects of annealing behaviors on the Ag Cu alloy nanoclusters are investigated. (C) 2004 Elsevier B.V. All rights reserved.

Material growth and device fabrication of highly strained InGaAs/InGaAsP long wavelength distributed feedback lasers

1.6-1.7 mu m highly strained InGaAs/InGaAsP distributed feedback lasers was grown and fabricated by low pressure mentalorganic chemical vapor deposition. High quality highly strained InGaAs/InP materials were obtained by using strain buffer layer. Four pairs of highly strained quantum wells were used in the devices and carrier blocking layer was used to improve the temperature characteristics of the devices. The uncoated 1.66 mu m and 1.74 mu m lasers with ridge wave guide 3 mu m wide have low threshold current (< 15mA) and high output power (> 14mW at 100mA). In the temperature range from 10 degrees C to 40 degrees C, the characteristic temperature T-0 of the 1.74 mu m laser is 57K, which is comparable to that of the 1.55 mu m-wavelength InGaAsP/InP-DFB laser.

Experimental investigation of slow light phenomenon in photonic crystal waveguide line defect laser

The guide mode whose frequency locates in the band edge in photonic crystal single line defect waveguide has very low group velocity. So the confinement and gain of electromagnetic field in the band edge are strongly enhanced. Photonic crystal waveguide laser is fabricated and the slow light phenomenon is investigated. The laser is pumped by pulsed pumping light at 980nm whose duty ratio is 0.05%. The active layer in photonic crystal slab is InGaAsP multiple quantum well. Light is transimited by a photonic crystal chirp waveguide in one facet of the laser. Then the output light is coupled to a fiber and the character of laser is analysis by an optical spectrometer. It is found that single mode and multimode happens with different power of pumping light. Meanwhile the plane wave expansion and finite-difference time-domain methods are used to simulate the phenomenon of slow light. And the result of the experiment is compared with the theory which proves the slow light results in lasing oscillation.