From bargaining solutions to claims rules: a proportional approach

Is it important to negotiate on proportions rather than on numbers? To answer this question, we analyze the behavior of well-known bargaining solutions and the claims rules they induce when they are applied to a "proportionally transformed" bargaining set SP -so-called bargaining-in-proportions set. The idea of applying bargaining solutions to claims problems was already developed in Dagan and Volij (1993). They apply the bargaining solutions over a bargaining set that is the one de ned by the claims and the endowment. A comparison among our results and theirs is provided. Keywords: Bargaining problem, Claims problem, Proportional, Constrained Equal Awards, Constrained Equal Losses, Nash bargaining solution. JEL classi fication: C71, D63, D71.

Iowa State Rehabilitation Council 2003-2004 Annual Report

This Council was mandated by the 1992 Amendments to the Rehabilitation Act. Report includes mission, Council duties, accomplishments throughout the year, and member biographies.

Causality and endogeneity: Problems and solutions

Most leadership and management researchers ignore one key design and estimation problem rendering parameter estimates uninterpretable: Endogeneity. We discuss the problem of endogeneity in depth and explain conditions that engender it using examples grounded in the leadership literature. We show how consistent causal estimates can be derived from the randomized experiment, where endogeneity is eliminated by experimental design. We then review the reasons why estimates may become biased (i.e., inconsistent) in non-experimental designs and present a number of useful remedies for examining causal relations with non-experimental data. We write in intuitive terms using nontechnical language to make this chapter accessible to a large audience.

Development of a Mix Design Process for Cold-in-Place Rehabilitation Using Foamed Asphalt, December 2005

Report by Iowa Department of Transportation about pavements materials.

LdShake: learning design solutions sharing and co-edition

Two important challenges that teachers are currently facing are the sharing and the collaborative authoring of their learning design solutions, such as didactical units and learning materials. On the one hand, there are tools that can be used for the creation of design solutions and only some of them facilitate the co-edition. However, they do not incorporate mechanisms that support the sharing of the designs between teachers. On the other hand, there are tools that serve as repositories of educational resources but they do not enable the authoring of the designs. In this paper we present LdShake, a web tool whose novelty is focused on the combined support for the social sharing and co-edition of learning design solutions within communities of teachers. Teachers can create and share learning designs with other teachers using different access rights so that they can read, comment or co-edit the designs. Therefore, each design solution is associated to a group of teachers able to work on its definition, and another group that can only see the design. The tool is generic in that it allows the creation of designs based on any pedagogical approach. However, it can be particularized in instances providing pre-formatted designs structured according to a specific didactic method (such as Problem-Based Learning, PBL). A particularized LdShake instance has been used in the context of Human Biology studies where teams of teachers are required to work together in the design of PBL solutions. A controlled user study, that compares the use of a generic LdShake and a Moodle system, configured to enable the creation and sharing of designs, has been also carried out. The combined results of the real and controlled studies show that the social structure, and the commenting, co-edition and publishing features of LdShake provide a useful, effective and usable approach for facilitating teachers' teamwork.

Iowa Department of Education, Division of Vocational Rehabilitation, Notification Letter, April 14th, 2005

State Audit Reports

Réadaptation cardiovasculaire, un- bien sous-utilisé [Cardiac rehabilitation, a proven intervention underutilized in the French-speaking part of Switzerland].

Cardiac rehabilitation is associated with a reduced risk of recurrence and mortality after an acute coronary syndrome. Cardiac rehabilitation is a multidisciplinary approach which starts during the acute hospital phase, then followed by a four to six weeks home-based or stationary program, in order to maintain long-term lifestyle changes. Despite the important health benefits of cardiac rehabilitation and its cost-effectiveness, only half of the patients in Europe will achieve a cardiovascular prevention program after an acute coronary syndrome. In the French part of Switzerland, one explanation for this low adherence might be the lack of both stationary and home-based program facilities.

Iowa Vocational Rehabilitation Performance Report, FY 2005

Agency Performance Report

Iowa Vocational Rehabilitation Performance Report, FY 2004

Agency Performance Report

Iowa Vocational Rehabilitation Performance Report, FY 2005

Agency Performance Report

Rehabilitation of Concrete Pavements Utilizing Rebblization and Crack and Seat Methods, June 2005

Deterioration in portland cement concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. However, the design of structural overlay thickness for cracked and seated and rubblized pavements is difficult as the resulting structure is neither a “true” rigid pavement nor a “true” flexible pavement. Existing design methodologies use the empirical procedures based on the AASHO Road Test conducted in 1961. But, the AASHO Road Test did not employ any fractured slab technique, and there are numerous limitations associated with extrapolating its results to HMA overlay thickness design for fractured PCC pavements. The main objective of this project is to develop a mechanistic-empirical (ME) design approach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program. A partial validation of the design method with reference to an instrumented trial project (IA-141, Polk County) in Iowa is provided in this report. Tensile strain values at the bottom of the HMA layer collected from the FWD testing at this project site are in agreement with the results obtained from the developed computer program.

Caution on the storage of waters and aqueous solutions in plastic containers for hydrogen and oxygen stable isotope analysis

RATIONALE The choice of containers for storage of aqueous samples between their collection, transport and water hydrogen (2H) and oxygen (18O) stable isotope analysis is a topic of concern for a wide range of fields in environmental, geological, biomedical, food, and forensic sciences. The transport and separation of water molecules during water vapor or liquid uptake by sorption or solution and the diffusive transport of water molecules through organic polymer material by permeation or pervaporation may entail an isotopic fractionation. An experiment was conducted to evaluate the extent of such fractionation. METHODS Sixteen bottle-like containers of eleven different organic polymers, including low and high density polyethylene (LDPE and HDPE), polypropylene (PP), polycarbonate (PC), polyethylene terephthalate (PET), and perfluoroalkoxy-Teflon (PFA), of different wall thickness and size were completely filled with the same mineral water and stored for 659?days under the same conditions of temperature and humidity. Particular care was exercised to keep the bottles tightly closed and prevent loss of water vapor through the seals. RESULTS Changes of up to +5 parts per thousand for d2H values and +2.0 parts per thousand for d18O values were measured for water after more than 1?year of storage within a plastic container, with the magnitude of change depending mainly on the type of organic polymer, wall thickness, and container size. The most important variations were measured for the PET and PC bottles. Waters stored in glass bottles with Polyseal (TM) cone-lined PP screw caps and thick-walled HDPE or PFA containers with linerless screw caps having an integrally molded inner sealing ring preserved their original d2H and d18O values. The carbon, hydrogen, and oxygen stable isotope compositions of the organic polymeric materials were also determined. CONCLUSIONS The results of this study clearly show that for precise and accurate measurements of the water stable isotope composition in aqueous solutions, rigorous sampling and storage procedures are needed both for laboratory standards and for unknown samples. Copyright (c) 2012 John Wiley & Sons, Ltd.

Rehabilitation outcomes for orthopaedic trauma individuals as measured by the INTERMED.

PURPOSE: Bio-psychosocial characteristics of patients after orthopaedic traumas may be a strong predictor of poor outcome. The objective of this prospective study was to assess whether the INTERMED, a measure of bio-psychosocial complexity, identifies complex inpatients during rehabilitation including vocational aspects with a poor outcome 1 year after discharge. METHOD: At entry, the INTERMED scores of 118 inpatients were used to assign patients to the high or low complexity group. A questionnaire evaluated 1 year after discharge whether patients: (1) returned to work, (2) still have therapies, (3) take psychoactive drugs, (4) take medication against pain and (5) were satisfied with vocational therapy. Univariate logistic regressions identified which variables predict INTERMED case complexity during hospitalisation as well as predictors (i.e. INTERMED case complexity, French as preferred language, duration of the disability, accident at work, work qualification, severity of the injury, psychiatric co-morbidities, pain) of the five measured outcomes 1 year after discharge. RESULTS: During hospitalisation, the high complexity group was associated with a high prevalence of psychiatric co-morbidities, a higher level of pain and a weaker perception of treatment effects. One year after discharge, the INTERMED was the sole variable to predict all outcomes. CONCLUSION: The INTERMED identifies complex patients during vocational rehabilitation after orthopaedic trauma and is a good predictor of poor outcome 1 year after discharge.

Iowa State Rehabilitation Council Annual Report 2005-2006, December 31, 2007

Annual Report for Iowa Vocational Rehabilitation Services (IVRS), a division of the Iowa Department of Education, is committed to working for and with individuals who have disabilities to achieve their employment, independence and economic goals. This document contains information highlighting the accomplishments of IVRS this year.

GIS Mapping: Creating Solutions for Rock Creek Lake, 2004

Rock Creek Lake is at risk. The centerpiece of Rock Creek State Park in Jasper County, Rock Creek Lake offers visitors a range of recreational opportunities, including the second busiest campground in Iowa and great fishing. However, many different factors are threatening the lake. Action is being taken to improve the lake for today’s visitors and to preserve the lake for future generations. GIS mapping is helping to make those improvements possible.