Case study: a 3D resistivity and induced polarization imaging from downstream a waste disposal site in Brazil

A contaminated site from a downstream municipal solid waste disposal site in Brazil was investigated by using a 3D resistivity and induced polarization (IP) imaging technique. This investigation purpose was to detect and delineate contamination plume produced by wastes. The area was selected based on previous geophysical investigations, and chemical analyses carried out in the site, indicating the presence of a contamination plume in the area. Resistivity model has successfully imaged waste presence (rho < 20 Omega m), water table depth, and groundwater flow direction. A conductive anomaly (rho < 20 Omega m) outside wastes placement was interpreted as a contamination plume. Chargeability model was also able to imaging waste presence (m > 31 mV/V), water table depth, and groundwater flow direction. A higher chargeability zone (m > 31 mV/V) outside wastes placement and following conductive anomaly was interpreted as a contamination plume. Normalized chargeability (MN = m/rho) confirmed polarizable zone, which could be an effect of a salinity increase (contamination plume), and the clay presence in the environment.

Influence of the combined disposal of sewage and brine on meiofauna

[EN] Confluence of anthropogenic influences is common in coastal areas (e.g., disposal of different pollutants like industrial and domestic sewage, brine, etc.). In this study we assessed whether the combined disposal of domestic sewage and brine altered patterns in the abundance and assemblage structure of subtidal meiofauna inhabiting sandy seabeds. Samples were collected in May 2008 and January 2009 at varying distances (0, 15, and 30 m) from the discharge point. Meiofaunal abundances were consistently larger at 0 m (1663.05 ± 1076.86 ind 10 cm?2, mean ± standard error) than at 15 m (471.21 ± 307.97 ind 10 cm?2) and 30 m (316.50 ± 256.85 ind 10 cm?2) from the discharge outfall. This pattern was particularly accentuated for nematodes. Proximity to the discharge point also altered patterns in meiofaunal assemblage structure, though temporal shifts in the sedimentary composition also contributed to explain differences in the meiofaunal assemblage structure. As a result, meiofauna may be a reliable tool for monitoring studies of the combined disposal of sewage and brine as long as potential confounding factors (here temporal changes in grain size composition) are considered.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Prevalence, predictors, and consequences of long-term refusal of antipsychotic treatment in first-episode psychosis

Studies investigating medication adherence in psychosis are limited by the need of a certain degree of medication adherence and the inclusion of mostly multiple-episode patients. By contrast, noninformed consent, epidemiological studies in first-episode psychosis (FEP) allow the assessment of an important subgroup of patients who persistently refuse antipsychotic medication and thereby never receive an adequate antipsychotic trial. The present study aims to assess the prevalence and predictors of such a "medication refusal" subgroup and its association with illness outcome.

Are there accurate predictors of long-term vital and functional outcomes in cardiac surgical patients requiring prolonged intensive care?

BACKGROUND AND OBJECTIVE: The decision to maintain intensive treatment in cardiac surgical patients with poor initial outcome is mostly based on individual experience. The risk scoring systems used in cardiac surgery have no prognostic value for individuals. This study aims to assess (a) factors possibly related to poor survival and functional outcomes in cardiac surgery patients requiring prolonged (> or = 5 days) intensive care unit (ICU) treatment, (b) conditions in which treatment withdrawal might be justified, and (c) the patient's perception of the benefits and drawbacks of long intensive treatments. METHODS: The computerized data prospectively recorded for every patient in the intensive care unit over a 3-year period were reviewed and analyzed (n=1859). Survival and quality of life (QOL) outcomes were determined in all patients having required > or =5 consecutive days of intensive treatment (n=194/10.4%). Long-term survivors were interviewed at yearly intervals in a standardized manner and quality of life was assessed using the dependency score of Karnofsky. No interventions or treatments were given, withhold, or withdrawn as part of this study. RESULTS: In-hospital, 1-, and 3-year cumulative survival rates reached 91.3%, 85.6%, and 75.1%, respectively. Quality of life assessed 1 year postoperatively by the score of Karnofsky was good in 119/165 patients, fair in 32 and poor in 14. Multivariate logistic regression analysis of 19 potential predictors of poor outcome identified dialysis as the sole factor significantly (p=0.027) - albeit moderately - reducing long-term survival, and sustained neurological deficit as an inconstant predictor of poor functional outcome (p=0.028). One year postoperatively 0.63% of patients still reminded of severe suffering in the intensive station and 20% of discomfort. Only 7.7% of patients would definitely refuse redo surgery. CONCLUSIONS: This study of cardiac surgical patients requiring > or =5 days of intensive treatment did not identify factors unequivocally justifying early treatment limitation in individuals. It found that 1-year mortality and disability rates can be maintained at a low level in this subset of patients, and that severe suffering in the ICU is infrequent.

Prevalence and predictors of suicide attempt in an incidence cohort of 661 young people with first-episode psychosis

Studies investigating suicidal behaviour in psychosis rarely focus on incidence cohorts of first-episode patients. This is important, because patients who refuse study participation have higher rates of comorbid substance use disorders and longer duration of untreated psychosis as well as worse course illness, variables potentially linked to higher prevalence of suicidal behaviour. The aims of the present study were therefore to examine the prevalence and predictors of suicide and suicide attempt before and during the first 18-24 months of treatment.

Knowledge, beliefs, risk behaviors, and social skills for HIV/STD prevention in junior college students (grades 11--12) in Bombay, India

1230 year 11 and 12 college students, modal age 16 and 17, in three colleges in Bombay, India, were studied on sexual behaviors or risk of sexual behaviors, beliefs about sex, HIV/STD knowledge, perceived norms regarding sexual behaviors, and the relationships between social skills/anxieties in HIV/STD prevention and actual and anticipated sexual behaviors. A quantitative questionnaire examining HIV/STD risk behaviors, knowledge, attitudes and beliefs, and the AIDS Social Assertiveness Scale (ASAS) were administered to these 1230 college students. Data indicated that 8% of males and 1% of females had had sexual experience, but over one third were not sure at all of being able to abstain from sexual activity with either steady or casual partners. Perceived norms were slanted toward sexual abstinence for the majority of the sample. Knowledge of protective effects of condoms was high, although half of those who had had sex did not use condoms. Logistic regression showed knowledge was higher among males, those who believed it was OK to have sex with a steady partner and that they should not wait until they were older, those who believed that condoms should be used even if the partner is known, and those who believed it was acceptable to have multiple partners. Gender differences in sexual activity and beliefs about sexual activity showed males were less likely to believe in abstaining from sexual activity. The 5 scales of the ASAS were scored and compared on ANOVA on: those who had had sexual experience (HS), those who anticipated being unable to refuse sex (AS), and those who did not anticipate problems in refusing sex (DS). Those in the AS group had greater anxieties about refusing sexual or other risk behaviors than HS and DS groups. There were greater anxieties about dealing with condoms in the AS and DS groups compared with the HS group. Confiding sexual or HIV/STD-related problems to significant others was more anxiety-provoking for the AS group compared with the HS group, and the AS group were more anxious about interactions with people with HIV. Factor analysis produced the same 5 factors as those found in previous studies. Of these, condom interactions and confiding in significant others were most anxiety provoking, and condom interactions most variable based on demographic and attitudinal factors.^ This age group is appropriate for HIV/STD reduction education given the low rate of sexual activity but despite knowledge of the importance of condom use, social skills to apply this knowledge are lacking. Social skills training in sexual negotiations, condom negotiations, and confiding HIV/STD-related concerns to significant others should reduce the risks of Indian college students having unwanted or unprotected sex. ^

The location of majority and minority populations with respect to commercial treatment, storage, and disposal facilities in Texas

There is a growing interest in the location of Treatment, Storage, and Disposal (TSDF) sites in relation to minority communities. A number of studies have been completed, and the results of these studies have been varied. Some of the studies have shown a strong positive correlation between the location of TSDF sites and minority populations, while a few have shown no significance in that relationship. The major difference between these studies has been in the areal unit used.^ This study compared the minority populations of Texas census tracts and ZIP codes containing a TSDF using the associated county as the comparison population. The hypothesis of this study was that there was no difference between using census tracts and ZIP codes to analyze the relationship of minority populations and TSDF's. The census data used was from 1990, and the initial list of TSDF sites was supplied by the Texas Natural Resource Conservation Commission. The TSDF site locations were checked using graphical information systems (GIS) programs, in order to increase the accuracy of the identity of exposed ZIP codes and census tracts. The minority populations of the exposed areal units were compared using proportional differences, crosstables, maps, and logistic regression. The dependent variable used was the exposure status of the areal units under study, including counties, census tracts, and ZIP codes. The independent variables used included minority group proportion and grouping of the proportions, educational status, household income, and home value.^ In all cases, education was significant or near significant at the.05 level. Education rather than minority proportion was therefore the most significant predictor of the exposure status of a census tract or ZIP code. ^

Ethnography of a Land Grab and Gendered Coping Strategies in Northern Sierra Leone

Despite an increased scientific interest in the relatively new phenomenon of large-scale land acquisition (LSLA), data on the implementation of such projects and their impacts on the heterogeneous group of project-affected people are still sparse and superficial. Our ethnographic in-depth research on a Swiss-based bioenergy project in Sierra Leone generates well-documented data and provides insights into gendered access to land and wage employment. In the area where the project is located, customary land tenure applies. Thereby, women are structurally discriminated since they are not entitled to own land. However, user rights grant women and non-landowning men access to land and associated resources. Following the investing development banks’ guidelines, the company considered the local customary law when implementing its project. Nevertheless, the company only consulted and compensated landowners although women and non-landowning men could previously benefit from acquired land as well. Moreover, the company’s policy to enhance employment possibilities for women is barely implemented, and only few local women are hired. In order to cope with the transformed situation some women and non-landowning men continue to engage in subsistence farming on a reduced area of land. Others are involved in informal petty-trade or cooking food for the labourers whereby they subsidize the capitalist production of the company. In one village, women resisted additional land takes of the company. Acting within the framework of a specific power constellation on community level and simultaneously accommodating their claims within policy paradigms on transnational level, they were able to force a landowner to refuse leasing land to the company.

Mobile Temporalities: Place, Ruination and the Dialectics of Time

In this chapter I explore the ambiguous, contradictory and often transient ways the past enters into our lives. I shed light on the interplay of mobility and temporality in the lifeworlds of two Somalis who left Mogadishu with the outbreak of the war in the 1990s. Looking into the ways they actively make sense of this crucial ‘memory-place’ (Ricoeur 2004), a place that that has been turned into a landscape of ruins and rubble, alternative understandings of memory and temporality will emerge. Instead of producing a continuum between here and there, and now and then, the stories and photographs discussed in this chapter form dialectical images – images that refuse to be woven into a coherent picture of the past. By emphasising the dialectical ways these two individuals make sense of Mogadishu’s past and presence, I am following Walter Benjamin’s cue to rethink deeply modern analytical categories such as history, memory and temporality by highlighting the brief, fragmented moments of their appearance in everyday life.

Use of intranet and other interventions to increase influenza vaccination among health care workers

Influenza (the flu) is a serious respiratory illness that can cause severe complications, often leading to hospitalization and even death. Influenza epidemics occur in most countries every year, usually during the winter months. Despite recommendations from the Centers for Disease Control and Prevention (CDC) and efforts by health care institutions across the United States, influenza vaccination rates among health care workers in the United States remain low. How to increase the number of vaccinated health care workers is an important public health question and is examined in two journal articles included here. ^ The first journal article evaluates the effectiveness of an Intranet intervention in increasing the proportion of health care workers (HCWs) who received influenza vaccination. Hospital employees were required go to the hospital's Intranet and select "vaccine received," "contraindicated," or "declined" from the online questionnaire. Declining employees automatically received an online pop-up window with education about vaccination; managers were provided feedback on employees' participation rates via e-mail messages. Employees were reminded of the Intranet requirement in articles in the employee newsletter and on the hospital's Intranet. Reminders about the Intranet questionnaire were provided through managers and newsletters to the HCWs. Fewer than half the employees (43.7%) completed the online questionnaire. Yet the hospital witnessed a statistically significant increase in the percentage of employees who received the flu vaccine at the hospital – 48.5% in the 2008-09 season as compared to 36.5%, 38.5% and 29.8% in the previous three years (P < 0.05). ^ The second article assesses current interventions employed by hospitals, health systems and nursing homes to determine which policies have been the most effective in boosting vaccination rates among American health care workers. A systematic review of research published between January 1994 and March 2010 suggests that education is necessary but not usually sufficient to increase vaccine uptake. Education about the flu and flu vaccines is most effective when complemented with easy access and making the vaccine free, although this combination may not be sufficient to achieve the desired vaccination levels among HCWs. The findings point toward adding incentives for HCWs to get vaccinated and requiring them to record their vaccination status on a declination/consent form – either written or electronic. ^ Based on these findings, American health care organizations, such as hospitals, nursing homes, and long-term care facilities, should consider using online declination forms as a method for increasing influenza vaccination rates among their employees. These online forms should be used in conjunction with other policies, including free vaccine, mobile distribution and incentives. ^ To further spur health care organizations to adopt policies and practices that will raise influenza vaccination rates among employees, The Joint Commission – an independent, not-for- profit organization that accredits and certifies more than 17,000 health care organizations and programs in the United States – should consider altering its standards. Currently, The Joint Commission does not require signed declination forms from employees who eschew vaccination; it only echoes the CDC's recommendations: "Health care facilities should require personnel who refuse vaccination to complete a declination form." Because participation in Joint Commission accreditation is required for Medicare reimbursement, action taken by the Joint Commission to require interventions such as mandatory declination/consent forms might result in immediate action by health care organizations to follow these new standards and lead to higher vaccination rates among HCWs.^ 1“Frequently Asked Questions for H1N1 and Seasonal Influenza.” The Joint Commission - Infection Control: http://www.jointcommission.org/PatientSafety/InfectionControl/h1n1_faq.htm. ^

A comparison of worker risk of injury while working on fully automated side loaders and other residential collection trucks at a large solid waste collection company

The study aim was to determine whether using automated side loader (ASL) trucks in higher proportions compared to other types of trucks for residential waste collection results in lower injury rates (from all causes). The primary hypothesis was that the risk of injury to workers was lower for those who work with ASL trucks than for workers who work with other types of trucks used in residential waste collection. To test this hypothesis, data were collected from one of the nation’s largest companies in the solid waste management industry. Different local operating units (i.e. facilities) in the company used different types of trucks to varying degrees, which created a special opportunity to examine refuse collection injuries and illnesses and the risk reduction potential of ASL trucks.^ The study design was ecological and analyzed end-of-year data provided by the company for calendar year 2007. During 2007, there were a total of 345 facilities which provided residential services. Each facility represented one observation.^ The dependent variable – injury and illness rate, was defined as a facility’s total case incidence rate (TCIR) recorded in accordance with federal OSHA requirements for the year 2007. The TCIR is the rate of total recordable injury and illness cases per 100 full-time workers. The independent variable, percent of ASL trucks, was calculated by dividing the number of ASL trucks by the total number of residential trucks at each facility.^ Multiple linear regression models were estimated for the impact of the percent of ASL trucks on TCIR per facility. Adjusted analyses included three covariates: median number of hours worked per week for residential workers; median number of months of work experience for residential workers; and median age of residential workers. All analyses were performed with the statistical software, Stata IC (version 11.0).^ The analyses included three approaches to classifying exposure, percent of ASL trucks. The first approach included two levels of exposure: (1) 0% and (2) >0 - <100%. The second approach included three levels of exposure: (1) 0%, (2) ≥ 1 - < 100%, and (3) 100%. The third approach included six levels of exposure to improve detection of a dose-response relationship: (1) 0%, (2) 1 to <25%, (3) 25 to <50%, (4) 50 to <75%, (5) 75 to <100%, and (6) 100%. None of the relationships between injury and illness rate and percent ASL trucks exposure levels was statistically significant (i.e., p<0.05), even after adjustment for all three covariates.^ In summary, the present study shows that there is some risk reduction impact of ASL trucks but not statistically significant. The covariates demonstrated a varied yet more modest impact on the injury and illness rate but again, none of the relationships between injury and illness rate and the covariates were statistically significant (i.e., p<0.05). However, as an ecological study, the present study also has the limitations inherent in such designs and warrants replication in an individual level cohort design. Any stronger conclusions are not suggested.^

PM2.5, PM10, and PM10-associated elements in the air in Bamako, Mali (2012-2013)

Saharan dust incursions and particulates emitted from human activities degrade air quality throughout West Africa, especially in the rapidly expanding urban centers in the region. Particulate matter (PM) that can be inhaled is strongly associated with increased incidence of and mortality from cardiovascular and respiratory diseases and cancer. Air samples collected in the capital of a Saharan-Sahelian country (Bamako, Mali) between September 2012 - July 2013 were found to contain inhalable PM concentrations that exceeded World Health Organization (WHO) and US Environmental Protection Agency (USEPA) PM2.5 and PM10 24-h limits 58 - 98% of days and European Union (EU) PM10 24-h limit 98% of days. Mean concentrations were 1.2-to-4.5 fold greater than existing limits. Inhalable PM was enriched in transition metals, known to produce reactive oxygen species and initiate the inflammatory reaction, and other potentially bioactive and biotoxic metals/metalloids. Eroded mineral dust composed the bulk of inhalable PM, whereas most enriched metals/metalloids were likely emitted from oil combustion, biomass burning, refuse incineration, vehicle traffic, and mining activities. Human exposure to inhalable PM and associated metals/metalloids over 24-h was estimated. The findings indicate that inhalable PM in the Sahara-Sahel region may present a threat to human health, especially in urban areas with greater inhalable PM and transition metal exposure.