A Statistical Analysis of Iowa Premature Concrete Pavement Deterioration, Supplementary Study, HR-1063, 1997

This supplementary project has been undertaken as an effort to continue work previously completed in the Pooled Fund Study of Premature Concrete Pavement Deterioration. As such, it shares the objective of "Identifying the variables that are present in those pavements exhibiting premature deterioration," by collecting additional data and performing statistical analysis of those data. The approach and philosophy of this work are identical to that followed in the above project, and the Pooled Fund Study Final Report provides a detailed description of this process. This project has involved the collection of data for additional sites in the state of Iowa. These sites have then been added to sites collected in the original study, and statistical analysis has been performed on the entire set. It is hoped that this will have two major effects. First, using data from only one state allows for the analysis of a larger set of independent variables with a greater degree of commonality than was possible in the multi-state study, since the data are not limited by state to state differences in data collection and retention. Second, more data on additional sites will increase the degrees of freedom in the model and hopefully add confidence to the results.

Predictive analysis and mapping of indoor radon concentrations in Switzerland

It is estimated that around 230 people die each year due to radon (222Rn) exposure in Switzerland. 222Rn occurs mainly in closed environments like buildings and originates primarily from the subjacent ground. Therefore it depends strongly on geology and shows substantial regional variations. Correct identification of these regional variations would lead to substantial reduction of 222Rn exposure of the population based on appropriate construction of new and mitigation of already existing buildings. Prediction of indoor 222Rn concentrations (IRC) and identification of 222Rn prone areas is however difficult since IRC depend on a variety of different variables like building characteristics, meteorology, geology and anthropogenic factors. The present work aims at the development of predictive models and the understanding of IRC in Switzerland, taking into account a maximum of information in order to minimize the prediction uncertainty. The predictive maps will be used as a decision-support tool for 222Rn risk management. The construction of these models is based on different data-driven statistical methods, in combination with geographical information systems (GIS). In a first phase we performed univariate analysis of IRC for different variables, namely the detector type, building category, foundation, year of construction, the average outdoor temperature during measurement, altitude and lithology. All variables showed significant associations to IRC. Buildings constructed after 1900 showed significantly lower IRC compared to earlier constructions. We observed a further drop of IRC after 1970. In addition to that, we found an association of IRC with altitude. With regard to lithology, we observed the lowest IRC in sedimentary rocks (excluding carbonates) and sediments and the highest IRC in the Jura carbonates and igneous rock. The IRC data was systematically analyzed for potential bias due to spatially unbalanced sampling of measurements. In order to facilitate the modeling and the interpretation of the influence of geology on IRC, we developed an algorithm based on k-medoids clustering which permits to define coherent geological classes in terms of IRC. We performed a soil gas 222Rn concentration (SRC) measurement campaign in order to determine the predictive power of SRC with respect to IRC. We found that the use of SRC is limited for IRC prediction. The second part of the project was dedicated to predictive mapping of IRC using models which take into account the multidimensionality of the process of 222Rn entry into buildings. We used kernel regression and ensemble regression tree for this purpose. We could explain up to 33% of the variance of the log transformed IRC all over Switzerland. This is a good performance compared to former attempts of IRC modeling in Switzerland. As predictor variables we considered geographical coordinates, altitude, outdoor temperature, building type, foundation, year of construction and detector type. Ensemble regression trees like random forests allow to determine the role of each IRC predictor in a multidimensional setting. We found spatial information like geology, altitude and coordinates to have stronger influences on IRC than building related variables like foundation type, building type and year of construction. Based on kernel estimation we developed an approach to determine the local probability of IRC to exceed 300 Bq/m3. In addition to that we developed a confidence index in order to provide an estimate of uncertainty of the map. All methods allow an easy creation of tailor-made maps for different building characteristics. Our work is an essential step towards a 222Rn risk assessment which accounts at the same time for different architectural situations as well as geological and geographical conditions. For the communication of 222Rn hazard to the population we recommend to make use of the probability map based on kernel estimation. The communication of 222Rn hazard could for example be implemented via a web interface where the users specify the characteristics and coordinates of their home in order to obtain the probability to be above a given IRC with a corresponding index of confidence. Taking into account the health effects of 222Rn, our results have the potential to substantially improve the estimation of the effective dose from 222Rn delivered to the Swiss population.

Statistical Analysis of Highway Needs Condition Data: Manual vs. Automated, TR-494

This project examines similarities and differences between the automated condition data collected on and off county paved roads and the manual condition data collected by Iowa Department of Transportation (DOT) staff in 2000 and 2001. Also, the researchers will provide staff support to the advisory committee in exploring other options to the highway need process. The results show that the automated condition data can be used in a converted highway needs process with no major differences between the two methods. Even though the foundation rating difference was significant, the foundation rating weighting factor in HWYNEEDS is minimal and should not have a major impact. In terms of RUTF formula based distribution, the results clearly show the superiority of the condition-based analysis compared to the non-condition based. That correlation can be further enhanced by adding more distress variables to the analysis.

Iowa's Barriers to Prenatal Care Project, August 2013

The findings in this summary are based on the Iowa Barriers to Prenatal Care project. Ongoing since 1991, the purpose of this project is to obtain brief, accurate information about women delivering babies in Iowa hospitals. Specifically, the project seeks to learn about women’s experiences getting prenatal or delivery care during their current pregnancy. Other information is included which may be pertinent to health planners or those concerned with the systematic development of health care services. This project is a cooperative venture of all of Iowa’s maternity hospitals, the University of Northern Iowa Center for Social and Behavioral Research, and the Iowa Department of Public Health. The Robert Wood Johnson Foundation funded the first three years of this project. The current funding is provided by the Iowa Department of Public Health. The Director is Dr. Mary Losch, University of Northern Iowa Center for Social and Behavioral Research. The Coordinator for the project is Rodney Muilenburg. The questionnaire is distributed to nearly ninety maternity hospitals across the state of Iowa. Nursing staff or those responsible for obtaining birth certificate information in the obstetrics unit are responsible for approaching all birth mothers prior to dismissal and requesting their participation in the study. The questionnaire takes approximately ten minutes to complete. Completed questionnaires are returned to the University of Northern Iowa Center for Social and Behavioral Research for data entry and analysis. Returns are made monthly, weekly, or biweekly depending on the number of births per week in a given hospital. Except in the case of a mother who is too ill to complete the questionnaire, all mothers are eligible to be recruited for participation. The present yearly report includes an analysis of large Iowa cities, African American mothers, and a trend analysis of the last ten years. Also presented in this report is a frequency analysis of all variables included in the 2012 questionnaire. Unless otherwise noted, all entries reflect percentages. Please note that because percentages were rounded, total values may not equal 100%. Data presented are based upon 2012 questionnaires received to date (n = 23,674). All analyses reflect unweighted percentages of those responding.

Motivic analysis and its relevance to raga identification in carnatic music

A raga is a collective melodic expression consisting of motifs. A raga can be identified using motifs which areunique to it. Motifs can be thought of as signature prosodic phrases. Different ragas may be composed of the same setof notes, or even phrases, but the prosody may be completely different. In this paper, an attempt is made to determinethe characteristic motifs that enable identification of a raga and distinguish between them. To determine this, motifs are first manually marked for a set of five popular raga by a professional musician. The motifs are then normalisedwith respect to the tonic. HMMs are trained for each motif using 80% of the data and about 20% are used for testing. The results do indicate that about 80% of the motifs are identified as belonging to a specific raga accurately.

Evaluation of transversal competencies: pilot project in a maths course for first-year business

The aim of this communication is to describe the results of a pilot project for the assessment of the transversal competency "the capacity for learning and responsibility". This competency is centred on the capacity for the analysis, synthesis, overview, and practical application of newly acquired knowledge. It is proposed by the University of Barcelona in its undergraduate degree courses,through multidisciplinary teaching teams. The goal of the pilot project is to evaluate this competency.We worked with a group of students in a first-year Business Degree maths course, during the firstsemester of the 2012/2013 academic year. The development of the project was in two stages: (i)design of a specific task to share with the same students in the following semester when the subjectwould be economic history; and (ii) the elaboration of an evaluation rubric in which we defined thecontent, the aspects to evaluate, the evaluation criteria, and the marking scale. The attainment of theexpectations of quality on the specific task was scored following this rubric, which provided a singlebasis for the precise and fair assessment by the instructor and for the students' own self-evaluation.We conclude by describing the main findings of the experience. There particularly stood out the highscore in the students' self-evaluation given to one aspect of the competency – their capacity forlearning – in stark contrast to their instructor's quite negative evaluation. This means that we have towork both to improve teaching practice and to identify the optimal competency evaluationmethodology.

Neutralizing antibodies in Multiple Sclerosis a model-based analysis of Interferon beta signaling pathway in macrophages

Multiple Sclerosis is the most common non-traumatic cause of neurologicaldisability in young people. There is no cure yet, and until recently, few long-termtherapies existed. Interferon beta (IFNβ) was the first treatment, and remains the mostcommonly prescribed. One of the most significant problems of IFNβ therapy is theproduction of drug specific antibodies. Up to 45% of patients develop neutralizingantibodies (NAbs) to IFNβ products. The neutralizing antibody binds to the biologicalagent preventing its interaction with its receptor, inhibiting the biological action of theprotein, which abrogates the clinical efficacy of IFNβ treatment. Interferon-betamediates its response by binding to its high affinity cell surface receptor and initiatingthe JAK/STAT signalling cascade. In this project we have analyzed the IFNβ signalingpathway in macrophages when neutralizing antibodies are present. The response tothis pathway after IFNβ stimulation shows a transient oscillatory rhythm of STAT1phosphorylation, which varies as NAbs concentration increases. To improve ourunderstanding of that behavior, we extended an existing mathematical model based onnonlinear ordinary differential equations of JAK/STAT pathway by including IFN-NAbassociation and IFN-activation receptor. Combining our theoretical model withexperimental data we could study the role of neutralizing antibodies on the molecularresponse and determine its lifetime after cytokine stimulation.

GSVA: gene set variation analysis for microarray and RNA-seq data

Gene set enrichment (GSE) analysis is a popular framework for condensing information from gene expression profiles into a pathway or signature summary. The strengths of this approach over single gene analysis include noise and dimension reduction, as well as greater biological interpretability. As molecular profiling experiments move beyond simple case-control studies, robust and flexible GSE methodologies are needed that can model pathway activity within highly heterogeneous data sets. To address this challenge, we introduce Gene Set Variation Analysis (GSVA), a GSE method that estimates variation of pathway activity over a sample population in an unsupervised manner. We demonstrate the robustness of GSVA in a comparison with current state of the art sample-wise enrichment methods. Further, we provide examples of its utility in differential pathway activity and survival analysis. Lastly, we show how GSVA works analogously with data from both microarray and RNA-seq experiments. GSVA provides increased power to detect subtle pathway activity changes over a sample population in comparison to corresponding methods. While GSE methods are generally regarded as end points of a bioinformatic analysis, GSVA constitutes a starting point to build pathway-centric models of biology. Moreover, GSVA contributes to the current need of GSE methods for RNA-seq data. GSVA is an open source software package for R which forms part of the Bioconductor project and can be downloaded at http://www.bioconductor.org.

Concrete Pavement Mixture Design and Analysis (MDA): An Innovative Approach To Proportioning Concrete Mixtures, TPF-5(205), 2015

Mixture proportioning is routinely a matter of using a recipe based on a previously produced concrete, rather than adjusting the proportions based on the needs of the mixture and the locally available materials. As budgets grow tighter and increasing attention is being paid to sustainability metrics, greater attention is beginning to be focused on making mixtures that are more efficient in their usage of materials yet do not compromise engineering performance. Therefore, a performance-based mixture proportioning method is needed to provide the desired concrete properties for a given project specification. The proposed method should be user friendly, easy to apply in practice, and flexible in terms of allowing a wide range of material selection. The objective of this study is to further develop an innovative performance-based mixture proportioning method by analyzing the relationships between the selected mix characteristics and their corresponding effects on tested properties. The proposed method will provide step-by-step instructions to guide the selection of required aggregate and paste systems based on the performance requirements. Although the provided guidance in this report is primarily for concrete pavements, the same approach can be applied to other concrete applications as well.

Low latitude Paleocene to early Eocene radiolarian systematics, biochronology and paleoenvironmental analysis

Highly diverse radiolarian faunas of latest Maastrichtian to early Eocene age have been recovered from the low latitude realm in order to contribute to the clarification of radiolarian taxonomy, construct a zonation based on a discrete sequence of co-existence intervals of species ranging from the late Paleocene to early Eocene and to describe a rich low latitude latest Cretaceous to late Paleocene fauna. 225 samples of late Paleocene to early Eocene age have been collected from ODP Leg 171 B-Hole 1051 A (Blake Nose), DSDP Leg 43-Site 384 (Northwest Atlantic) and DSDP Leg 10-Sites 86, 94, 95, 96. Sequences consist of mainly pelagic oozes and chalks, with some clay and ash layers. A new imaging technique is devised to perform (in particular on topotypic material) both transmitted light microscopy and SEM imaging on individual radiolarian specimens. SEM precedes transmitted light imaging. Radiolarians are adhered to a cover slip (using nail varnish) which is secured to a stub using conductive levers. Specimens are then photographed in low vacuum (40-50Pa; 0.5mbar), which enables charge neutralization by ionized molecules of the chamber atmosphere. Thus gold coating is avoided and subsequently this allows transmitted light imaging to follow. The conductive levers are unscrewed and the cover slip is simply overturned and mounted with Canada balsam. In an attempt towards a post-Haeckelian classification, the initial spicule (Entactinaria), micro- or macrosphere (Spumellaria) and initial spicule and cephalis (Nassellaria) have been studied by slicing Entactinaria and Spumellaria, and by tilting Nassellaria in the SEM chamber. A new genus of the family Coccodiscidae is erected and Spongatractus HAECKEL is re-located to the subfamily Axopruinae. The biochronology has been carried out using the Unitary Association Method (Guex 1977, 1991). A database recording the occurrences of 112 species has been used to establish a succession of 22 Unitary Associations. Each association is correlated to chronostratigraphy via calcareous microfossils that were previously studied by other authors. The 22 UAs have been united into seven Unitary Associations Zones (UAZones) (JP10- JE4). The established zones permit to distinguish supplementary subdivisions within the existing zonation. The low-latitude Paleocene radiolarian zonation established by Sanfilippo and Nigrini (1998a) is incomplete due to the lack of radiolarian-bearing early Paleocene sediments. In order to contribute to the study of sparsely known low latitude early Paleocene faunas, 80 samples were taken from the highly siliceous Guayaquil Formation (Ecuador). The sequence consists of black cherts, shales, siliceous limestones and volcanic ash layers. The carbonate content increases up section. Age control is supplied by sporadic occurrences of silicified planktonic foraminifera casts. One Cretaceous zone and seven Paleocene zones have been identified. The existing zonation for the South Pacific can be applied to the early-early late Paleocene sequence, although certain marker species have significantly shorter ranges (notably Buryella foremanae and B. granulata). Despite missing marker species in the late Paleocene, faunal distribution correlates reasonably to the Low-Latitude zonation. An assemblage highly abundant in Lithomelissa, Lophophaena and Cycladophora in the upper RP6 zone (correlated by the presence of Pterocodon poculum, Circodiscus circularis, Pterocodon? sp. aff. P. tenellus and Stylotrochus nitidus) shows a close affinity to contemporaneous faunas reported from Site 1121, Campbell Plateau. Coupled with a high diatom abundance (notably Aulacodiscus spp. and Arachnoidiscus spp.), these faunas are interpreted as reflecting a period of enhanced biosiliceous productivity during the late Paleocene. The youngest sample is void of radiolarians, diatoms and sponge spicules yet contains many pyritized infaunal benthic foraminifera which are akin to the midway-type fauna. The presence of this fauna suggests deposition in a neritic environment. This is in contrast to the inferred bathyal slope depositional environment of the older Paleocene sediments and suggests a shoaling of the depositional environment which may be related to a coeval major accretionary event. RESUME DE LA THESE Des faunes de radiolaires de basses latitudes très diversifiées d'âge Maastrichtien terminal à Eocène inférieur, ont été étudiées afin de contribuer à la clarification de leur taxonomie, de construire une biozonation basée sur une séquence discrète d'intervalles de coexistence des espèces d'age Paléocène supérieur à Eocène inférieur et de décrire une riche faune de basse latitude allant du Crétacé terminal au Paléocène supérieur. L'étude de cette faune contribue particulièrement à la connaissance des insaisissables radiolaires de basses latitudes du Paléocène inférieur. 225 échantillons d'âge Paléocène supérieur à Eocène inférieur provenant des ODP Leg 171B-Site 1051A (Blake Nose), Leg DSDP 43-Site 384 (Atlantique Nord -Ouest) et des DSDP Leg 10 -Sites 86, 94, 95, 96, ont été étudiés. Ces séquences sont constituées principalement de « ooze » et de « chalks »pélagiques ainsi que de quelques niveaux de cendres et d'argiles. Une nouvelle technique d'imagerie a été conçue afin de pouvoir prendre conjointement des images en lumière transmise et au Microscope Electronique à Balayage (MEB) de spécimens individuels. Ceci à été particulièrement appliqué à l'étude des topotypes. L'imagerie MEB précède l'imagerie en lumière transmise. Les radiolaires sont collés sur une lame pour micropaléontologie (au moyen de vernis à ongles) qui est ensuite fixée à un porte-objet à l'aide de bras métalliques conducteurs. Les spécimens sont ensuite photographiés en vide partiel (40-50Pa; 0.5mbar), ce qui permet la neutralisation des charges électrostatiques dues à la présence de molécules ionisées dans l'atmosphère de la chambre d'observation. Ainsi la métallisation de l'échantillon avec de l'or n'est plus nécessaire et ceci permet l'observation ultérieure en lumière transmise. Les bras conducteurs sont ensuite dévissés et la lame est simplement retournée et immergée dans du baume du Canada. Dans une approche de classification post Haeckelienne, le spicule initial (Entactinaires), la micro- ou macro -sphère (Spumellaires) et le spicule initial et cephalis (Nassellaires) ont été étudiés. Ceci a nécessité le sectionnement d'Entactinaires et de Spumellaires, et de pivoter les Nassellaires dans la chambre d'observation du MEB. Un nouveau genre de la Famille des Coccodiscidae a été érigé et Spongatractus HAECKEL à été réassigné à la sous-famille des Axopruninae. L'analyse biostratigraphique à été effectuée à l'aide de la méthode des Associations Unitaires {Guex 1977, 1991). Une base de données enregistrant les présences de 112 espèces à été utilisée poux établir une succession de 22 Associations Unitaires. Chaque association est corrélée à la chronostratigraphie au moyen de microfossiles calcaires précédemment étudiés par d'autres auteurs. Les 22 UAs ont été combinées en sept Zones d'Associations Unitaires (UAZones) (JP10- JE4). Ces Zones permettent d'insérer des subdivisions supplémentaires dans la zonation actuelle. La zonation de basses latitudes du Paléocène établie par Sanfilippo et Nigrini (1998a) est incomplète due au manque de sédiments du Paléocène inférieur contenant des radiolaires. Afin de contribuer à l'étude des faunes peu connues des basses latitudes du Paléocène inférieur, 80 échantillons ont été prélevés d'une section siliceuse de la Formation de Guayaquil (Equateur). La séquence est composée de cherts noirs, de shales, de calcaires siliceux et de couches de cendres volcaniques. La fraction carbonatée augmente vers le haut de la section. Des contraintes chronologiques sont fournies par la présence sporadique de moules de foraminifères planctoniques. Une zone d'intervalles du Crétacé et sept du Paléocène ont été mises en évidence. Bien que certaines espèces marqueur ont des distributions remarquablement plus courtes (notamment Buryella foremanae et B. granulata), la zonation existante pour le Pacifique Sud est applicable à la séquence d'age Paléocène inférieure à Paléocène supérieur basal étudiée. Malgré l'absence d'espèces marqueur du Paléocène supérieur, la succession faunistique se corrèle raisonnablement avec la zonation pour les basses latitudes. Un assemblage contenant d'abondants représentant du genre Lithomelissa, Lophophaena et Cycladophora dans la zone RP6 (correlée par la présence de Pterocodon poculum, Circodiscus circularis, Pterocodon? sp. aff. P. tenellus et Stylotrochus nitidus) montre une grande similitude avec certaines faunes issues des hauts latitudes et d'age semblable décrites par Hollis (2002, Site 1121, Campbell Plateau). Ceci, en plus d'une abondance importante en diatomés (notamment Aulacodiscus spp. et Arachnoidiscus spp.) nous mènent à interpréter cette faune comme témoin d'un épisode de productivité biosiliceuse accrue dans le Paléocène supérieur. L'échantillon le plus jeune, dépourvu de radiolaires, de diatomés et de spicules d'éponge contient de nombreux foraminifères benthiques infaunaux pyritisés. Les espèces identifiées sont caractéristiques d'une faune de type midway. La présence de ces foraminifères suggère un environnement de type néritique. Ceci est en contraste avec l'environnement de pente bathyale caractérisent les sédiments sous-jacent. Cette séquence de diminution de la tranche d'eau peut être associée à un événement d'accrétion majeure. RESUME DE LA THESE (POUR LE GRAND PUBLIC) Les radiolaires constituent le groupe de plancton marin le plus divers et le plus largement répandu de l'enregistrement fossile. Un taux d'évolution rapide et une variation géographique considérable des populations font des radiolaires un outil de recherche sans égal pour la biostratigraphie et la paléocéanographie. Néanmoins, avant de pouvoir les utiliser comme outils de travail, il est essentiel d'établir une solide base taxonomique. L'étude des Radiolaires peut impliquer plusieurs techniques d'extraction, d'observation et d'imagerie qui sont dépendantes du degré d'altération diagénétique des spécimens. Le squelette initial, qu'il s'agisse d'un spicule initial (Entactinaria), d'une micro- ou macro -sphère (Spumellaria) ou d'un spicule initial et d'un cephalis (Nassellaria), est l'élément le plus constant au cours de l'évolution et devrait représenter le fondement de la systématique. Des échantillons provenant de carottes de basses latitudes du Deep Sea Drilling Project et de l' Ocean Drilling ont été étudiés. De nouvelles techniques d'imagerie et de sectionnement ont été développées sur des topotypes de radiolaires préservés en opale, dans le but d'étudier les caractéristiques de leur squelette initial qui n'étaient pas visibles dans leur illustration originale. Ceci aide entre autre à comparer des spécimens recristallisés en quartz, provenant de terrains accrétés, avec les holotypes en opale de la littérature. La distribution des espèces étudiés a fourni des données biostratigraphiques qui ont été compilées à l'aide de la méthode des Associations Unitaires (Guez 1977, 1991). Il s'agit d'un modèle mathématique déterministe conçu pour exploiter la totalité de l'assemblage plutôt que de se confiner à l'utilisation de taxons marqueurs individuels. Une séquence de 22 Associations Unitaires a été établie pour la période allant du Paléocène supérieur à l'Éocène inférieur. Chaque Association Unitaire a été corrélée à l'échelle de temps absolue à l'aide de microfossiles calcaires. Les 22 UAs ont été combinées en sept Zones d'Associations Unitaires (JP10- JE4). Ces Zones permettent d'insérer des subdivisions supplémentaires dans la zonation actuelle. Les radiolaires du Paléocène inférieur à moyen des basses latitudes sont rares. Les meilleures sections connues se trouvent dans les hautes latitudes (Nouvelle Zélande). Quelques assemblages épars ont été mentionnés par le passé en Californie, en Équateur et en Russie. Une séquence siliceuse de 190 mètres dans la Formation de Guayaquil (Équateur), s'étendant du Maastrichtien supérieur au Paléocène supérieur, a fourni des faunes relativement bien préservées. L'étude de ces faunes a permis de mettre en évidence la première séquence complète de radiolaires de basses latitudes dans le Paléocène inférieure. Huit zones allant du Crétacé terminal au Paléocène supérieur ont pu être appliqués et la présence de foraminifères planctoniques a fournie plusieurs points d'attache chronologiques. Dans le Paléocène supérieur, un riche assemblage contenant d'abondants diatomés et radiolaires ayant des similitudes faunistiques marquantes avec des assemblages de hautes latitudes de Nouvelle Zélande, témoigne d'un épisode de productivité biosiliceuse accrue pendant cette période. Étant donné que la pointe du continent sud-américain et l'Antarctique étaient plus proches au cours du Paléocène, ce phénomène peut être expliqué par le transport, le long de la côte ouest de l'Amérique du Sud, d'eaux riches en nutriments en provenance de l'Océan Antarctique. Suite à cet épisode, l'enregistrement en radiolaires est interrompu. Ceci peut être associé à des événements tectoniques régionaux qui ont eu pour effet de diminuer la tranche d'eau relative, rendant l'environnement plus favorable aux foraminifères benthiques qui sont abondamment présents dans l'échantillon le plus jeune de la séquence.

Investigation of Rapid Thermal Analysis Procedures for Prediction of the Service Life of PCCP Carbonate Coarse Aggregate, HR-337, 1993

The major objective of this research project was to use thermal analysis techniques in conjunction with x-ray analysis methods to identify and explain chemical reactions that promote aggregate related deterioration in portland cement concrete. Twenty-two different carbonate aggregate samples were subjected to a chemical testing scheme that included: • bulk chemistry (major, minor and selected trace elements) • bulk mineralogy (minor phases concentrated by acid extraction) • solid-solution in the major carbonate phases • crystallite size determinations for the major carbonate phases • a salt treatment study to evaluate the impact of deicer salts Test results from these different studies were then compared to information that had been obtained using thermogravimetric analysis techniques. Since many of the limestones and dolomites that were used in the study had extensive field service records it was possible to correlate many of the variables with service life. The results of this study have indicated that thermogravimetric analysis can play an important role in categorizing carbonate aggregates. In fact, with modern automated thermal analysis systems it should be possible to utilize such methods on a quality control basis. Strong correlations were found between several of the variables that were monitored in this study. In fact, several of the variables exhibited significant correlations to concrete service life. When the full data set was utilized (n = 18), the significant correlations to service life can be summarized as follows ( a = 5% level): • Correlation coefficient, r, = -0.73 for premature TG loss versus service life. • Correlation coefficient, r, = 0.74 for relative crystallite size versus service life. • Correlation coefficient, r, = 0.53 for ASTM C666 durability factor versus service life. • Correlation coefficient, r, = -0.52 for acid-insoluble residue versus service life. Separation of the carbonate aggregates into their mineralogical categories (i.e., calcites and dolomites) tended to increase the correlation coefficients for some specific variables (r sometimes approached 0.90); however, the reliability of such correlations was questionable because of the small number of samples that were present in this study.

Total Cost of Transportation Analysis of Road and Highway Issues, HR-388, 2002

In the administration, planning, design, and maintenance of road systems, transportation professionals often need to choose between alternatives, justify decisions, evaluate tradeoffs, determine how much to spend, set priorities, assess how well the network meets traveler needs, and communicate the basis for their actions to others. A variety of technical guidelines, tools, and methods have been developed to help with these activities. Such work aids include design criteria guidelines, design exception analysis methods, needs studies, revenue allocation schemes, regional planning guides, designation of minimum standards, sufficiency ratings, management systems, point based systems to determine eligibility for paving, functional classification, and bridge ratings. While such tools play valuable roles, they also manifest a number of deficiencies and are poorly integrated. Design guides tell what solutions MAY be used, they aren't oriented towards helping find which one SHOULD be used. Design exception methods help justify deviation from design guide requirements but omit consideration of important factors. Resource distribution is too often based on dividing up what's available rather than helping determine how much should be spent. Point systems serve well as procedural tools but are employed primarily to justify decisions that have already been made. In addition, the tools aren't very scalable: a system level method of analysis seldom works at the project level and vice versa. In conjunction with the issues cited above, the operation and financing of the road and highway system is often the subject of criticisms that raise fundamental questions: What is the best way to determine how much money should be spent on a city or a county's road network? Is the size and quality of the rural road system appropriate? Is too much or too little money spent on road work? What parts of the system should be upgraded and in what sequence? Do truckers receive a hidden subsidy from other motorists? Do transportation professions evaluate road situations from too narrow of a perspective? In considering the issues and questions the author concluded that it would be of value if one could identify and develop a new method that would overcome the shortcomings of existing methods, be scalable, be capable of being understood by the general public, and utilize a broad viewpoint. After trying out a number of concepts, it appeared that a good approach would be to view the road network as a sub-component of a much larger system that also includes vehicles, people, goods-in-transit, and all the ancillary items needed to make the system function. Highway investment decisions could then be made on the basis of how they affect the total cost of operating the total system. A concept, named the "Total Cost of Transportation" method, was then developed and tested. The concept rests on four key principles: 1) that roads are but one sub-system of a much larger 'Road Based Transportation System', 2) that the size and activity level of the overall system are determined by market forces, 3) that the sum of everything expended, consumed, given up, or permanently reserved in building the system and generating the activity that results from the market forces represents the total cost of transportation, and 4) that the economic purpose of making road improvements is to minimize that total cost. To test the practical value of the theory, a special database and spreadsheet model of Iowa's county road network was developed. This involved creating a physical model to represent the size, characteristics, activity levels, and the rates at which the activities take place, developing a companion economic cost model, then using the two in tandem to explore a variety of issues. Ultimately, the theory and model proved capable of being used in full system, partial system, single segment, project, and general design guide levels of analysis. The method appeared to be capable of remedying many of the existing work method defects and to answer society's transportation questions from a new perspective.

The Use of Remote Sensing Techniques Compared to Traditional Archaeological Phase II Testing Methods: A Cost-Benefit Analysis, HR-524, 1986

Remote sensing was utilized in the Phase II Cultural Resources Investigation for this project in lieu of extensive excavations. The purpose of the present report is to compare the costs and benefits of the use of remote sensing to the hypothetical use of traditional excavation methods for this project. Estimates for this hypothetical situation are based on the project archaeologist's considerable past experience in conducting similar investigations. Only that part of the Phase II investigation involving field investigations is addressed in this report. Costs for literature review, laboratory analysis, report preparation, etc., are not included. The project manager proposed the use of this technique for the fol lowing logistic, safety and budgetary reasons.

Simulation and Analysis of Arterial Traffic Operations Along the U.S. 61 Corridor in Burlington, Iowa, 1998

The Center for Transportation Research and Education (CTRE) used the traffic simulation model CORSIM to access proposed capacity and safety improvement strategies for the U.S. 61 corridor through Burlington, Iowa. The comparison between the base and alternative models allow for evaluation of the traffic flow performance under the existing conditions as well as other design scenarios. The models also provide visualization of performance for interpretation by technical staff, public policy makers, and the public. The objectives of this project are to evaluate the use of traffic simulation models for future use by the Iowa Department of Transportation (DOT) and to develop procedures for employing simulation modeling to conduct the analysis of alternative designs. This report presents both the findings of the U.S. 61 evaluation and an overview of model development procedures. The first part of the report includes the simulation modeling development procedures. The simulation analysis is illustrated through the Burlington U.S. 61 corridor case study application. Part I is not intended to be a user manual but simply introductory guidelines for traffic simulation modeling. Part II of the report evaluates the proposed improvement concepts in a side by side comparison of the base and alternative models.

Total Cost of Transportation Analysis of Road and Highway Issues, TR-477, Phase 2, 2003

A prior project, HR-388, (which was entitled "Total Cost of Transportation analysis of road and highway issues"), explored the use of a total economic cost basis for evaluation of road based transportation issues. It was conducted as a proof-of-concept effort between 1996 and 2002, with the final report presented in May 2002. TR-477 rebuilt the analytical model using current data, then performed general, system level, county level, and road segment level analyses. The results are presented herein and will be distributed to all county engineers for information and local use.