Processo de produção de composto orgânico derivado de resíduos industriais com aplicação no cultivo de alface

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Irradiação e atmosfera modificada passiva na qualidade pós-colheita de goiabas 'Pedro Sato'

The aim of this study was to evaluate the effect of gamma radiation associated with modified atmosphere on postharvest quality of guavas ‘Pedro Sato’. It was used guavas from the region of Vista Alegre do Alto/São Paulo/Brazil. After harvest, the fruits were immediately transported to the Fruit and Vegetables Laboratory from the Agroindustrial Management and Technology Department, Agronomic Sciences College - UNESP - Botucatu / SP, where they were kept at 10 ° C and 90-95% RH in cold storage, for 28 days. It was used the randomized design, with factorial scheme 5 x 5, three repetitions. The first factor consisted of the following effects: control 1 (without package or irradiation), control 2 (polystyrene package/PS + package low density polyethylene/LDPE and without irradiation), treatment 1 (PS + LDPE and 0.2 kGy ), treatment 2 (PS + LDPE and 0.6 kGy) and treatment 3 (PS + LDPE and 1.0 kGy). The second factor consisted of the evaluation periods: 0, 7, 14, 21 and 28 days. The analyses were: firmness, soluble solids (SS), titratable acidity (TA), maturity index, pH, respiration rate. Concluded that high doses of irradiation promoted a negative effect on physical-chemical characteristics of guava ‘Pedro Sato’, verifying that only the lowest dose associated with modified atmosphere provided fruits with higher quality and acceptability, due to higher maturation rate and soluble solids obtained. Regarding the days of analysis, there were no positive effect of the treatments during storage, where only the early days promoted better values for the variables studied.

Produção de repolho em função da idade das mudas

The seedling transplanting ages is a factor of great importance because it can affect the quality and yield of plants if the volume of the cell is not compatible with the phenology of seedlings at time of transplantation. The experiment was conducted at São Manuel Experimental farm, Faculdade de Ciências Agronômicas da UNESP, from March to August, 2009. The objective of this study was to evaluate the effect of seedling age on cabbage production, hybrid Kenzan. The seedlings were grown in polystyrene trays containing 128 cells. Seedings were done every four days and contained the following treatments: 37, 41, 45, 49 and 53 days after sowing (DAS). The experimental design was randomized blocks, with five replications. On transplantation’s day (11/05/2009), the number of leaves, fresh and dry weight and height, were evaluated to the characterization of seedlings. It was observed that the seedling age had no influence on traits at harvest: number of leaves inside and outside of “head”, fresh weight of shoot and “head”, dry mass of shoot and “head” and length of “heart”.

Características pós-colheita em frutos de pitaya orgânica submetida a diferentes doses de irradiação

The objective was to evaluate the influence of different irradiation doses in post-harvest characteristics of pitaya organic species Hylocereus undatus grown in the municipality of Itajobi - SP. The experiment was conducted at the Fruit and Vegetable Department of Agribusiness Management and Technology - FCA / UNESP - Botucatu - SP from December 2008 to January 2009. The radiation process was conducted at the Institute for Energy and Nuclear Research (IPEN) located in Sao Paulo. The design was randomized blocks with six treatments and three replications. The fruits were harvested on the third day after onset of color, selected, cleaned, packed in polystyrene trays covered with PVC film, pre - cooled (8 ° C for 24 hours) and subjected to different doses of gamma irradiation (0.0; 0.2, 0.4, 0.6, 0.8 and 1.0 kGy of cobalt-60) and subsequently stored in cold temperature of 8 degrees C, with relative humidity of about 85 ± 5%. The fruits were evaluated at twenty days after irradiation for pH, soluble solids (SS), Titratable Acidity (TA), ratio (SS / TA) and percentage loss of mass (weight). Data were subjected to analysis of variance and means compared by Tukey test at 5% probability. There were no statistically significant differences (p <0.05) for pH (4.82), soluble solids (11.33) Titratable acidity (0.12) and ratio (79.42) compared to non-irradiated fruit. Regarding the percentage of loss of mass (weight), the highest among the patients treated irradiated with 0.8 kGy (12.12%), whereas for treatment at a dose of 0.0 kGy (irradiated) showed a lower loss weight (11.59%), a result that differs significantly (P <0.05) from the remaining doses of irradiation. The loss of mass (weight) of fruit irradiated with other doses was not statistically significant (P> 0.05).

Conservação de goiabas ‘Pedro Sato’ minimamente processadas e irradiadas

The aim of this study was to evaluate the effect of gamma irradiation associated with modified atmosphere in cold storage of guava ‘Pedro Sato’ minimally processed, checking their physical-chemical characteristics. Were used guavas from the region of Vista Alegre do Alto/São Paulo/Brazil. After harvest, fruits were immediately transported to the Fruit and Vegetables Laboratory from the Agroindustrial Management and Technology Department, Agronomic Sciences College - UNESP - Botucatu / SP, where they were kept at 10 ° C and 90-95% RH in cold storage, for 12 days. In the laboratory, fruits were selected by size and lack of defects in order to standardize the lot and then were cut into slices 0.5 cm thick. We used the completely randomized design, with factorial design 5 x 5, with three replications. The first factor consisted of the following effects: control 1 (without package or irradiation), control 2 (polystyrene package/PS + package low density polyethylene/LDPE and without irradiation), treatment 1 (PS + LDPE and 0.2 kGy ), treatment 2 (PS + LDPE and 0.6 kGy) and treatment 3 (PS + LDPE and 1.0 kGy). The second factor consisted of the evaluation periods: 0, 3, 6, 9 and 12 days. The analyses were: firmness, soluble solids (SS), titratable acidity (TA), maturity index, pH, breathing behavior. In the end of this work it was concluded that the lower dose of radiation associated with modified atmosphere promoted positive effect on physical-chemical characteristics of guava ‘Pedro Sato’, providing fruits with higher quality and durability, due to higher maintenance of pulp firmness, the highest pH and soluble solids obtained. Regarding the storage days, there were no beneficial effect of the treatments during storage, mainly due to the sensitivity of fruits submitted to gamma irradiation, where only the early days provided better values for the variables.

Avaliação enzimática na pós-colheita do maná cubiu tratados com radiação gama

The objective of this study was to evaluate the effects of gamma radiation on fruit quality and conservation of mana cubiu through its enzymatic characteristics, with 20 days of storage and 5 taken every 4 days. The fruits selected were subjected to different doses of gamma radiation Co60 (0.0; 0.2; 0.4; 0.6 and 0.8 kGy) packaged in trays of expanded polyethylene then covered with stretchable PVC film associated with refrigerated stored at 10 ± 3°C e 85 ± 5% de UR and evaluated in six periods (0, 4, 8, 12, 16 e 20 days). The variables evaluated were: enzymatic activity of pectin (PME), polygalacturonase (PG), polyphenoloxidase (PPO) and peroxidase (POD). For PG there was no interaction between dose and storage on the day 16 the highest value to 640.10 UE min-1 g-1 and 0.8 kGy dose showed the lowest with 376.37 10 UE min-1 g-1. PME now get in 16 days and 0.8 kGy dose the highest values of the experiment, to 290.74 UE min-1 g-1. In POF, the day 16 presented the value of 0.26 min-1 g-1 of dry mass-1. In 20 days the fruits of all treatments provided the highest values of POD during the experiment. The results showed that different doses of gamma radiation does not interfere with the activity of the enzymes determined in this experiment.

Aproveitamento energético de uma planta de sulfatação

Pós-graduação em Engenharia Mecânica - FEG

As vozes e as visões dos catadores de materiais recicláveis sobre o meio ambiente

Pós-graduação em Serviço Social - FCHS

Diretrizes para o gerenciamento de resíduos provenientes de papel na UNESP, câmpus de Rio Claro

As atividades exercidas em uma Instituição acadêmica resultam na formação de diversos tipos de resíduos entre eles um volume considerável daqueles provenientes de celulose, principalmente variedades de papel e papelão, sendo o primeiro utilizado em larga escala para a confecção de objetos para os mais variados fins, de atividades didáticas, usos para fins de limpeza, até documentos. O presente trabalho foi realizado integrado às práticas do projeto PGR (Plano de Gerenciamento de Resíduos) desenvolvido no campus da Unesp de Rio Claro, tendo como objetivo o diagnóstico do gerenciamento dos resíduos de papel e papelão, tais como as práticas de descarte, reciclagem e/ou reutilização vigentes para posterior elaboração de um manual para o gerenciamento ambientalmente correto de tais tipos de resíduos. Para esse levantamento foi elaborado um questionário (Check-list) que foi aplicado nos diferentes setores da UNESP entre Novembro de 2014 e Abril de 2015. A partir desse levantamento preliminar e da quantificação aproximada do montante de resíduos e das porcentagens reutilizadas/recicladas e as descartadas, visou-se propor melhorias no processo de gerenciamento deste tipo de resíduo. O montante de resíduos provenientes de papel gerado nos 50 setores avaliados, sendo 27 do Instituto de Biociências, 21 do Instituto de Geociências e Ciências Exatas e dois de uso comum entre os dois institutos, foi de aproximadamente 190kg de material, embora observado que na maioria das vezes os papéis tenham sido eliminados junto a resíduos de outra natureza, até mesmo orgânicos. Também foram constatadas a proporção de setores que procuram reduzir e reutilizar seus resíduos, sendo que a reutilização de papéis diversos para rascunhos e a utilização de caixas de papelão para o armazenamento de variados objetos foram as práticas mais comumente observadas, sendo apresentadas em maior ou menor grau em 62% dos setores visitados

Potencial de contribuição e importância socioambiental dos 'catadores autônomos' de Rio Claro (SP) para o programa de coleta seletiva municipal

The Urban Solid Residues are the rests of human activity, popularly known by trash and considered by population like useless, undesirable and disposable. On the other hand, for the waste pickers, solid residues are the beginning of a cycle: they see in the other's people trash the only income, an economic value. Currently, in brazilian cities, one million collectors act, alone or in cooperatives, socially excluded by the work they do. The National Policy of Solid Residues (PNRS), instituted in 2010, established guidelines to the execution of integrated residues management, with should be practiced by city halls and other governmental institutions. This policy has, besides other things, goals of residues reduction and inclusion of waste pickers in the mechanism of selective collect and recycling. However, this and other public policies created for residue management are benefic only for cooperated waste pickers. That could negatively affect most of this class, since 90% are waste pickers working in a precarious way on the country's streets. This study has for objective show that most of waste pickers that work in a precarious way on the brazilian territory has a huge potential for the solid residues recycling chain and how they should be valued for the environmental services they provide, so they can be included with dignity on the society, ensuring economic and social benefits for this workers. The methodology adopted was based on the amount of residue collected by the 44 cooperated members of the Rio Claro‟s waste pickers cooperative to estimate the potential of collect and recycling did by 210 autonomous waste pickers who are active on city streets. It was observed that the cooperative collects the equivalent of 10.2% of all recyclable residues generated by city population. However, with the potential that these autonomous waste pickers have, which together could contribute 465 tonnes of solid residues per month, or 5,570 tons a year...

Automação em raspadora de pneus utilizando controle numérico computadorizado com controlador lógico programável integrado

This work studies and develops a machine automation for tyre truing. It is discussed industry development, industrial processes automation, tyre-recycling process, advantages of tyre reuse for preservation of the environment and probable gains from the automation of part of the tyre-recycling process. In this text, it is detailed the work done to configure, program and optimize the truing process through automation components as CNC, PLC and drives. Tests and simulations are performed to determine the payback necessary period in productivity and profit gains

Estudo sobre o uso de agregados reciclados na composição de concretos e argamassas

Two of the major problems caused by construction activity are the production of construction and demolition waste (CDW) and the exploitation of mineral resources, causing big impacts on the environment. Therefore, the recycling has been shown as an alternative to mitigate the harmful effects of waste on the urban environment and prevent the exploitation of new raw materials. This course work aims to study the behavior of recycled aggregates from Vale do Paraíba in concrete and mortar. Initially, it presents the definitions of recycled aggregates according to CONAMA Resolution No. 307/2002, the aggregate settings for concrete and mortar (such as the grain size, its origin and density, and the characterization parameters according to ABNT), and the definition of ACI method of concrete mix design. Afterwards, it presents the characterization of materials separated by assays. After that, it shows the theoretical concrete proportioning applying the ACI method and experimental concrete proportioning. Then, the analysis of results is performed to finally conclude that the materials provided can't be used to replace natural aggregates because they cannot have the same performance. With the studies, it could be observed that the recycled aggregate presents a great complexity and diversity in origin, therefore the form how the material should be handled requires great care

Gerenciamento de resíduos da construção civil: análise e atualização dos estudos realizados na UNESP-FEG para o município de Guaratinguetá

The construction industry is a large consumer of natural resources and one of the largest generators of residues with significant impacts on the environment. Because of the large production of Construction Industry Residues (RCC), it is essential reliable and updated information about generation, composition and classification sources of these residues, especially for management, recycling and final disposal. RCC represent the most part of solid residues generated in a city. In this way, the management of these residues is an issue that is gaining increasing importance in the Brazilian scenario, since the legal and society requirements to internalize the sustainability in the construction process - since the extraction, use, wastage savings, reutilization until the appropriate discard has been increasing in the last years. The present work objective is updating the quantities produced and collected in Guaratinguetá-SP, based on data collected with the municipal administrative entities that act direct or indirectly in the RCC management, elaborate a detailed bibliographic review, with special attention to the graduate works that were realized in FEG about this theme. With this material, scenarios to a better adequacy of the administrative structure to managements RCC activities, as well as was suggested actions to achieve these scenarios

Avaliação da rigidez torcional do chassi de um protótipo Baja SAE através do método de elementos finitos e de ensaio experimental

The torsional stiffness of chassis is one of the most important properties of a vehicle's structure and therefore its measurement is important. For the first time, the torsional stiffness was considered on the design of a prototype Baja SAE of the team from UNESP - FEG, Equipe Piratas do Vale Bardahl. According to the team's opinion, the increase of stiffness on this prototype, called MB1114, made possible a great improvement in its performance during competitions. In this work, the experimental evaluation of the torsional stiffness from this prototype is performed, detailing the analysis of results, as well as, the hysteresis' effect, least-squares regression and uncertainty analysis. It also shows that it is possible to measure the torsional stiffness of chassis with a low experimental uncertainty without expending many resources. The test rig costed R$ 32,50 due the reuse of materials and the use of instrumentation already available on campus. Furthermore, it is simple to produce and can be easily stocked. Those features are important for Baja and Formula SAE teams. Lastly, the measured value is used to validate the finite element analysis performed by the team during this prototype's design, because similar studies will be performed for the new cars. After investigating the finite element analysis, one result 13,5% higher than the measured value was reached. This difference is believed to be occurred due the imperfections of the finite element model, in other words, for not been possible to simulate every phenomena present on the real model

Análise de um trocador de calor tipo serpentina de uma planta de hipoclorito de sódio

This study aims to analyze the capacity of a helical coil heat exchanger to reach the requested heat transfer rates by a sodium hypochlorite production process. This heat exchanger was installed in an experimental way in order to reuse a source of low-temperatures water in such a way to become a more economical alternative than the existing cooling tower. Firstly, the concepts related to the theory of heat transfer applicable to the case were introduced. Then, the mapping of the main information about the production process and the technical specification of the current cooling system equipment's was realized. Using the dimensions of the heat exchanger installed today as reference, the calculations for determining the ideal length of the coil to different flows of hot fluid were performed. Finally, it was concluded that the heat exchanger currently employed does not provide heat transfer rates required for the maximum flow rate value supported by the cooling tower