Possibilities of advanced MAG-welding processes in shipbuilding

In shipbuilding industry welding of primer coated and tack welded steel products cause different issues. Primer coated steel products are commonly used at shipyards to ensure corrosion free storage of products in outdoor conditions. However usage of primer can cause imperfections to welds. To prevent porosity primed steel products are usually welded with tubular welding wires. Tack welds cause commonly interferences in mechanized welding when over welded, which increases costs related to welding due to increased need of preparing and repairing. The aim of this study is to research possibilities of advanced solid wire MAG-welding processes to deal with these two previously mentioned problems. This study concentrates to examine possibilities of MAG-welding, pulse MAG-welding, double pulse MAG-welding, RapidArc and ForceArc processes. Large amount of experiments were made to find out the produced porosity and the ability to over weld tack welds with each process in different circumstances. In welding of primed steel products porosity is caused mainly by hydrogen, CO, CO2, nitrous gases and zinc fumes. It was found in experiments that porosity of MAG-welding can be greatly decreased by using pulse MAG-welding instead. Also reduction of welding speed, usage of air gap and usage of solid wire product with higher amount of alloying elements reduces porosity. Researched advanced MAG-welding processes did not have an improvement into over welding of tack welds. With studied throat thicknesses and welding positions conventional MAG-welding managed better over welding of tack welds than the four studied advanced MAG-welding processes. Studied solid wire MAG-welding processes would be best suited at shipyard for mechanized welding in welding position PB. In welding positions PD and PG tubular welding wires are clearly more productive.

A contribuição de técnicas modernas de reabilitação estrutural para autenticidade e integridade de edificações patrimoniais

This work discusses the study of the application of structural reinforcement and rehabilitation using modern techniques for interventions in repair works of historical buildings as well as the verification of the behavior of works that have already undergone different structural intervention techniques, with the objective of obtaining data to allow a comparative analysis of the advantages/disadvantages of techniques adapted in each case, regarding the interferences related the authenticity and integrity of the buildings belong to the constructed patrimony so as to obtain a basis for the theoretical foundation for choosing the best solution to be adopted in the case study which consists in an intervention of structural rehabilitation of the old historic building in the primary school "Augusto Severo"

Caracterização in vitro de um dosímetro de fibra ótica para braquiterapia de HDR

Recentemente foi desenvolvido um dosímetro baseado em fibras cintilantes (BCF-12 da companhia Saint Gobain Crystals com 1 e 0,5 mm de diâmetro e 5 mm de comprimento) para braquiterapia de baixa taxa de dose, em particular a braquiterapia direcionada para o tratamento do cancro da próstata. Este utiliza um novo fotomultiplicador de estado sólido dado pelo nome de MPPC - MultiPixel Photon Counter da companhia Hamamatsu Photonics (Japão). Nesta dissertação é estudado o mesmo dosímetro para a modalidade de braquiterapia de elevada taxa de dose (HDR). A informação sobre a dose neste tipo de dosímetros é obtida a partir de sinais óticos (em vez de sinais elétricos), que são imunes a interferências elétricas e eletromagnéticas. Adicionalmente as pequenas dimensões das fibras oferecem uma excelente resolução espacial e uma invasão mínima para uso em dosimetria in vivo, permitindo medir a dose diretamente ou próximo ao tumor e em tempo real. A sua utilização em braquiterapia para o cancro da próstata constitui-se assim como uma vantagem, uma vez que as fibras podem ser inseridas diretamente nos aplicadores utilizados neste tipo de tratamentos. Apesar de tudo, este tipo de dosímetros possui algumas desvantagens, como por exemplo a luz de Cherenkov e a fluorescência (forma de ruído dada pelo nome de stem effect) que, e a contrário da luz produzida pela fibra cintilante, não são diretamente proporcionais à energia depositada. Contudo, e para energias praticadas em braquiterapia de HDR, nesta dissertação, mostrou-se que este problema é pouco significativo dado que a percentagem de contribuição destes efeitos para o sinal medido é menor que 1% (ou 5% para distâncias menores que 25 mm). Ao longo desta dissertação é feita a caraterização do dosímetro (em modo corrente e impulso) e das suas várias partes em ambiente de laboratório e clínico. Nestes estudos o dosímetro, além de exibir uma boa reprodutibilidade (variação máxima de 3% entre medidas), mostrou uma alta linearidade para uma ampla gama de doses, assim como uma sensibilidade (µGy) semelhante à de uma câmara de ionização, tornando-o adequado para braquiterapia de HDR (tratamento que envolve altos gradientes de dose). Complementarmente, a sua grande versatilidade e simples utilização possibilita a sua aplicação prática em outras modalidades radioterapêuticas.

O equilíbrio entre o trabalho e a vida privada: A adequação das práticas organizacionais às necessidades dos trabalhadores

Dissertação de Mestrado apresentada ao ISPA - Instituto Universitário

An electroanalytical application of 2-aminothiazole-modified silica gel after adsorption and separation of Hg(II) from heavy metals in aqueous solution

2-Aminothiazole covalently attached to a silica gel surface was prepared in order to obtain an adsorbent for Hg(II) ions having the following characteristics: good sorption capacity, chemical stability under conditions of use, and, especially, high selectivity. The accumulation voltammetry of mercury(II) was investigated at a carbon paste electrode chemically modified with silica gel functionalized with 2-aminothiazole (SIAMT-CPE). The repetitive cyclic voltammogram of mercury(II) solution in the potential range -0.2 to + 0.6 V versus Ag/AgCl (0.02 mol L-1 KNO3; V = 20 mV s(-1)) show two peaks one at about 0.1 V and other at 0.205 V. The anodic wave peak at 0.205 V is well defined and does not change during the cycles and it was therefore further investigated for analytical purposes using differential pulse anodic stripping voltammetry in differents supporting electrolytes. The mercury response was evaluated with respect to pH, electrode composition, preconcentration time, mercury concentration, cleaning solution, possible interferences and other variables. The precision for six determinations (n = 6) of 0.02 and 0.20 mg L-1 Hg(II) was 4.1 and 3.5% (relative standard deviation), respectively. The detection limit was estimated as 0.10 mu g L-1 mercury(II) by means of 3:1 current-to-noise ratio in connection with the optimization of the various parameters involved and using the highest-possible analyser sensitivity. (c) 2006 Elsevier Ltd. All rights reserved.

Análise de volatilidade, integração de preços e previsibilidade para o mercado brasileiro de camarão

The present paper has the purpose of investigate the dynamics of the volatility structure in the shrimp prices in the Brazilian fish market. Therefore, a description of the initial aspects of the shrimp price series was made. From this information, statistics tests were made and selected univariate models to be price predictors. Then, it was verified the existence of relationship of long-term equilibrium between the Brazilian and American imported shrimp and if, confirmed the relationship, whether or not there is a causal link between these assets, considering that the two countries had presented trade relations over the years. It is presented as an exploratory research of applied nature with quantitative approach. The database was collected through direct contact with the Companhia de Entrepostos e Armazéns Gerais de São Paulo (CEAGESP) and on the official website of American import, National Marine Fisheries Service - National Oceanic and Atmospheric Administration (NMFS- NOAA). The results showed that the great variability in the active price is directly related with the gain and loss of the market agents. The price series presents a strong seasonal and biannual effect. The average structure of price of shrimp in the last 12 years was R$ 11.58 and external factors besides the production and marketing (U.S. antidumping, floods and pathologies) strongly affected the prices. Among the tested models for predicting prices of shrimp, four were selected, which through the prediction methodologies of one step forward of horizon 12, proved to be statistically more robust. It was found that there is weak evidence of long-term equilibrium between the Brazilian and American shrimp, where equivalently, was not found a causal link between them. We concluded that the dynamic pricing of commodity shrimp is strongly influenced by external productive factors and that these phenomena cause seasonal effects in the prices. There is no relationship of long-term stability between the Brazilian and American shrimp prices, but it is known that Brazil imports USA production inputs, which somehow shows some dependence productive. To the market agents, the risk of interferences of the external prices cointegrated to Brazilian is practically inexistent. Through statistical modeling is possible to minimize the risk and uncertainty embedded in the fish market, thus, the sales and marketing strategies for the Brazilian shrimp can be consolidated and widespread

Voltammetric determination of isoprenaline in pharmaceutical preparations using a copper(II) hexacyanoferrate(III) modified carbon paste electrode

The electroanalytical determination of isoprenaline in pharmaceutical preparations of a homemade carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) was studied by cyclic voltammetry. Several parameters were studied for the optimization of the sensor such as electrode composition, electrolytic solution, pH effect, potential scan rate and interferences in potential. The optimum conditions were found in an electrode composition (in mass) of 15% CuHCF, 60% graphite and 25% mineral oil in 0.5 mol l(-1) acetate buffer solution at pH 6.0. The analytical curve for isoprenaline was linear in the concentration range from 1.96 x 10(-4) to 1.07 x 10(-3) mol l(-1) with a detection limit of 8.0 x 10(-5) mol l(-1). The relative standard deviation was 1.2% for 1.96 x 10(-4) mol l(-1) isoprenaline solution (n=5). The procedure was successfully applied to the determination of isoprenaline in pharmaceutical preparations; the CuHCF modified carbon paste electrode gave comparable results to those results obtained using a UV spectrophotometric method. (C) 2004 Elsevier B.V. All rights reserved.

A contribuição de técnicas modernas de reabilitação estrutural para autenticidade e integridade de edificações patrimoniais

This work discusses the study of the application of structural reinforcement and rehabilitation using modern techniques for interventions in repair works of historical buildings as well as the verification of the behavior of works that have already undergone different structural intervention techniques, with the objective of obtaining data to allow a comparative analysis of the advantages/disadvantages of techniques adapted in each case, regarding the interferences related the authenticity and integrity of the buildings belong to the constructed patrimony so as to obtain a basis for the theoretical foundation for choosing the best solution to be adopted in the case study which consists in an intervention of structural rehabilitation of the old historic building in the primary school "Augusto Severo"

IONIC LIQUID EXTRACTION UNVEILS PREVIOUSLY OCCLUDED HUMICBOUND IRON IN PEAT POREWATER

Extracellular iron reduction has been suggested as a candidate metabolic pathway that may explain a large proportion of carbon respiration in temperate peatlands. However, the o-phenanthroline colorimetric method commonly employed to quantitate iron and partition between redox species is known to be unreliable in the presence of humic and fulvic acids, both of which represent a considerable proportion of peatland dissolved organic matter. We propose ionic liquid extraction as a more accurate iron quantitation and redox speciation method in humic-rich peat porewater. We evaluated both o-phenanthroline and ionic liquid extraction in four distinct peatland systems spanning a gradient of physico-chemical conditions to compare total iron recovery and Fe2+:Fe3+ ratios determined by each method. Ionic liquid extraction was found to provide more accurate iron quantitation and speciation in the presence of dissolved organic matter. A multivariate approach utilizing fluorescence- and UV-Vis spectroscopy was used to identify dissolved organic matter characteristics in peat porewater that lead to poor performance of the o-phenanthroline method. Where these interferences are present, we offer an empirical correction factor for total iron quantitation by o-phenanthroline, as verified by ionic liquid extraction. The written work presented in this thesis is in preparation for submission to Soil Biology and Biochemisrty by T.J. Veverica, E.S. Kane, A.M. Marcarelli, and S.A. Green.

O crescimento urbano e a problemática da conservação das características do acervo arquitectonico: O caso das alçadas da Rua Grande, São Luís-Maranhão-Brasil

Esta dissertação estuda a problemática da conservação dos alçados da Rua Grande, localizada no Centro antigo da cidade de São Luís, capital do Estado do Maranhão, Brasil, a partir do crescimento urbano ocorrido principalmente a partir do século XIX à atualidade, com interferências devido às alterações do uso do solo. Iniciado com pesquisa in loco e nos departamentos de preservação do património arquitetónico do Município, Estado e Governo Federal, este estudo busca elaborar estratégias de intervenção adaptadas às necessidades locais, visando a participação da população, com cursos de educação patrimonial e consultas públicas. Esta proposta foi possível a partir da realização de diversas etapas de trabalho, partindo do enquadramento geral e histórico de São Luís, com foco específico na Rua Grande, discorrendo sobre a importância desta via ao desenvolvimento urbano da cidade. Desta forma, com vistas a possibilitar um melhor entendimento da morfologia urbana do Centro da cidade, analisou-se a malha delimitada pelo Anel Viário, importante via perimetral à zona central. Posteriormente, seguiu-se com a caracterização do acervo arquitetónico, com pesquisa acerca dos materiais e sistemas construtivos, permitindo o entendimento das diversas anomalias observadas a partir de análise laboratorial das amostras coletadas em algumas edificações. A elaboração de Cartas Temáticas permitiu um melhor entendimento de situações como uso do solo, gabarito, estilos arquitetónicos e dos estados de conservação e preservação, contando com o estudo da legislação local, o que permitiu, posteriormente, delinear-se as estratégias de intervenção. /SUMMARY: This dissertation examines the problems related to the conservation of the facades of the Grande street, located in the old city center of São Luis, capital of the northeastern state of Maranhão, Brazil, caused by the extensive urban growth that occurred from the XIX century to the current days, with numerous interferences due to changes in the building codes. The study began with a research in the federal, state and municipal departments of architectural heritage. The main objective was to suggest strategies of intervention adapted to the local needs, with community participation such as educational courses and public consultations. This proposal was made possible after completing several phases of work, starting with the general framing and historical background of São Luis, focusing on the Grande street, portraying the important role played by this street in the urban development of the city. Thus, with the intention of allowing a better understanding of the urban morphology in the city center, an analysis was made within the area limited by the road ring that surrounds the center. The study continued with the characterization of the architectural estate, with a research about the materials and construction systems, allowing the understanding of the several anomalies observed in the laboratorial analysis on the samples gathered from some buildings. The elaboration of the Thematic Charts allowed for a better understanding of the situation, such as land use, building codes, architectural styles and level of conservation and preservation, taking into account the local regulations, which made possible to set out some strategies of intervention.

Procedimento applicativo delle misure di prevenzione personale e rito penale: un rapporto controverso

La tesi si prefigge di far luce sui rapporti intercorrenti tra il procedimento applicativo delle misure di prevenzione personale di competenza giudiziale e il processo penale. Nello specifico, l’obiettivo è quello di mettere in evidenza tanto le interferenze, quanto le somiglianze e le inaccettabili divergenze tra i due riti. Nonostante dall’art. 29 cod. ant. traspaia un’apparente indifferenza tra azione penale e azione di prevenzione, infatti, le due sfere di tutela sono così intrecciate da rendere estremamente difficile sostenere che l’una in qualche modo non sia almeno condizionata dall’andamento dell’altra. Il fatto poi che l’unica disposizione contenente la disciplina del procedimento preventivo rinvii, per quanto non espressamente previsto e sempreché vi sia compatibilità, a quella dell’incidente di esecuzione ex art. 666 c.p.p., rimarca la vicinanza con il rito penale; una vicinanza che obbliga dottrina e giurisprudenza a interrogarsi per comprendere se almeno le principali tra le regole e i principi dettati per il processo penale possano valere anche per quello di prevenzione. Il cuore del lavoro sarà dunque dedicato a questa controversa opera di ricostruzione, al fine di individuare le garanzie che devono (o almeno dovrebbero) essere riconosciute al proposto.

Design and characterization of wideband Hall current sensors in BCD technology for smart power and metering applications

Power electronic circuits are moving towards higher switching frequencies, exploiting the capabilities of novel devices to shrink the dimension of passive components. This trend demands sensors capable enough to operate at such high frequencies. This thesis aims to demonstrate through experimental characterization, the broadband capability of a fully integrated CMOS X-Hall current sensor in current mode interfaced with a transimpedance amplifier (TIA), chip CH09, realized in CMOS technology for power electronics applications such as power converters. The system exploits a common-mode control system to operate the dual supply system, 5-V for the X-Hall probe and 1.2-V for the readout. The developed prototype achieves a maximum acquisition bandwidth of 12 MHz, a power consumption of 11.46 mW, resolution of 39 mArms, a sensitivity of 8 % /T, and a FoM of 569-MHz/A2mW, significantly higher than current state-of-the-art. Further enhancements were proposed to CH09 as a new chip CH100, aiming for accuracy levels prerequisite for a real-time power electronic application. The TIA was optimized for a wider bandwidth of 26.7 MHz with nearly 30% reduction of the integrated input referred noise of 26.69 nArms at the probe-AFE interface in the frequency band of DC-30 MHz, and a 10% improvement in the dynamic range. The expected input range is 5-A. The chip incorporates a dual sensing chain for differential sensing to overcome common mode interferences. A novel offset cancellation technique is proposed that would require switching of polarity of bias currents. Thermal gain drift was improved by a factor of 8 and will be digitally calibrated utilizing a new built-in temperature sensor with a post calibration measurement accuracy greater than 1%. The estimated power consumption of the entire system is 55.6 mW. Both prototypes have been implemented through a 90-nm microelectronic process from STMicroelectronics and occupy a silicon area of 2.4 mm2.

Dispositivos de cuidados intermediários e a reestruturação produtiva em saúde - Os hospitais comunitários na Itália

A pesquisa-intervenção pretendeu cartografar e analisar os processos de trabalho e a produção de cuidados nos Hospitais Comunitários, enquanto dispositivos de cuidados intermediários da Região Emilia-Romagna, Itália. Nos diferentes encontros do percurso cartográfico, foram-se tecendo sentidos e contextos para aproximação do campo micropolítico, que na organização do estudo compõem as “pausas”, adensamentos que construíram ferramentas de intervenção e leituras. Estas “pausas” apresentaram os processos de aproximação cultural, de construção metodológica, de invenção e reinvenção dos modos de investigar cartografando encontros e afetos; além da construção de sentidos que impactaram nas intervenções produzidas pelo estudo. As interferências produzidas durante o percurso da pesquisa formação, a partir da realização do projeto de cooperação internacional - RERSUS, relevaram o campo micropolítico do cotidiano do Hospitais Comunitários e estão apresentadas pelos “platôs” nesta tese. São estas zonas de intensidades, que a partir coletivo marcaram os agenciamentos enquanto dispositivos presentes que disputam novos modos de fazer. Tais dispositivos, linhas de fugas visibilizados no percurso da pesquisa, são lançados à luz do contexto da pandemia Covid-19, em transposição atual e necessária aos sistemas de saúde, reapresentando à discussão recolocação das cogentes demandas de transição tecnológica e completa reestruturação produtiva da saúde.

Analytical pyrolysis to study microplastics and other polymers in the environment

Synthetic polymers constitute a wide class of materials which has enhanced the quality of human life, providing comforts and innovations. Anyway, the increasing production and the incorrect waste management, are leading to the occurrence of polymers in the environment, generating concern. To understand the extent of this issue, analytical investigation holds an essential position. Standardised methods have not established yet, and additional studies are required to improve the present knowledge. The main aim of this thesis was to provide comprehensive information about the potential of pyrolysis coupled with gas-chromatography and mass spectrometry (Py-GC-MS) for polymers investigation, from their characterisation to their identification and quantification in complex matrices. Water-soluble (poly(dimethylsiloxanes), PDMS bearing poly(ethylene glycol), PEG, side chains) and water-insoluble polymers (microplastics, MPs, and bioplastics) were studied. The different studies revealed the possibility to identify heterogeneous classes of polymers, fingerprinting the presence of PDMS copolymers and distinguishing chemically different polyurethanes (PURs). The occurrence of secondary reactions in pyrolysis of polymer mixtures was observed as possible drawback. Pyrolysis products indicative of secondary reactions and their reaction mechanisms were identified. Py-GC-MS also revealed its fundamental role for the identification of polymers composing commercial bioplastics items based. The results aided to identify chemicals that have the potential to migrate in sea waters. Investigations of environmental samples demonstrated the capability of Py-GC-MS to provide reliable, reproducible and comparable results about polymers in complex matrices (PEG-PDMS in sewage sludges and PURs and other MPs in road dusts and spider webs). Criticisms were especially found in quantitation, such as the retrieval reference materials, the construction of reliable calibration protocols and the occurrence of bias due to interferences between pyrolysis products. This thesis pursues the greater purpose to develop harmonised and standardised methods for environmental investigations of polymers, that is fundamental to assess the real state of the environment.

Giurisdizione ordinaria civile e autorità amministrative indipendenti nel sistema integrato di tutela dei diritti

L’elaborato si propone di analizzare i principali punti di contatto, nell’ordinamento domestico, tra le funzioni esercitate dalla giurisdizione ordinaria civile e le attribuzioni delle Autorità amministrative indipendenti, nel tentativo di delineare un quadro sistematico dei rapporti. Nella prima parte dell’indagine, ci si sofferma sui variegati strumenti di risoluzione delle controversie coniati in seno alle Autorità indipendenti, cercando di sviluppare un’essenziale classificazione per categorie omogenee, al fine di vagliare la compatibilità dei diversi modelli con il dato costituzionale. Successivamente, si sposta l’indagine sulle interferenze emergenti con riferimento a quelle attività delle Authorities assimilabili all’applicazione della legge al caso concreto nel contesto del pubblic enforcement. Tra queste, spicca la delicata questione del valore dei provvedimenti delle Authorities nei (correlati) processi civili risarcitori, soprattutto a seguito dell’entrata in vigore dell’art. 7, d.lgs. 3/2017, che ha plasmato un inedito «vincolo» per il giudice ordinario all’accertamento dell’AGCM. Alla previsione normativa si associa la tendenza giurisprudenziale a riconoscere una particolare “attitudine probatoria” anche ai provvedimenti di altre Autorità indipendenti, pur in assenza di specifica previsione normativa. Nel corso della trattazione, più che limitarsi ad esprimere una preferenza tra le diverse soluzioni già proposte dalla dottrina, si cerca di gettare le basi per un’interpretazione autonoma e sistematica del fenomeno. Adottando un approccio quanto più possibile interdisciplinare, si cercano di coniugare i punti di approdo della teoria generale dell’accertamento giuridico con quelli, gius-pubblicistici, della categoria dell’accertamento amministrativo. Si passa, infine, a vagliare le condizioni affinché tale ipotetico modello unitario possa ritenersi compatibile con altri valori di rilievo costituzionale e non solo, utilizzando quale parametro di riferimento l’art. 6 Cedu, come interpretato dalla Corte di Strasburgo.