430 resultados para Fusões e aquisições
Resumo:
O principal objetivo deste estudo é análise da eficiência Econômica-Financeira das empresas siderúrgicas brasileiras no biênio 2004/2005, as quais foram fortemente influenciadas pela reestruturação produtiva do setor siderúrgico provocado pelo programa de privatização na década de 90 seguido de volumosos investimentos com ênfase na eliminação dos gargalos na produção, aumentando a capacidade produtiva do setor, além de aquisições em tecnologia. Portanto indaga-se: A) Os grandes investimentos ocorridos no setor siderúrgico pós-privatizações proporcionaram homogeneidade na eficiência Econômica-Financeira das empresas? B) Quais as empresas que apresentaram os melhores indicadores de eficiência Econômica Financeira no período estudado? Optou-se pelo método de Análise Envoltória de Dados (DEA) para a análise da eficiência proposta, que demonstrou facilidade quando a operabilidade e eficácia para a análise. Os resultados identificaram que os investimentos realizados não levaram a uma distribuição homogênea na eficiência Econômica-Financeira nas empresas estudadas, também foi identificado que as empresas do grupo Arcelor/Belgo e a empresa Villlares Metals dominaram a fronteira de eficiência, as demais empresas foram consideradas ineficientes, sendo que a V&M do Brasil obteve os menores índices de eficiência no setor. O DEA identificou, ainda focos de ineficiência e propôs alvos a serem atingidos pelas empresas em cada variável estudada com objetivo das mesmas alcançarem a fronteira de eficiência.(AU)
Resumo:
Este estudo enfoca a transposição da obra literária Estação Carandiru, de Drauzio Varella, para o cinema, no que tange à construção de suas personagens. Para tanto, fez-se um levantamento das personagens e de suas características, de ambas as obras. O objetivo maior é compreender as escolhas feitas durante este diálogo entre mídias, que originou o filme Carandiru, de Hector Babenco, visto que houve uma grande redução no número de personagens. Para esta análise, adotou-se a pesquisa descritiva como procedimento metodológico. Constatou-se que a maior parte das origens das personagens cinematográficas vem de fusões de personagens literárias. Mas também foram encontradas personagens literárias que foram desmembradas e algumas que foram eliminadas. Não se encontrou nenhuma personagem acrescentada.(AU)
Resumo:
A paralisia cerebral, doença não progressiva, compromete movimentos e postura. A fisioterapia atual volta-se para um tratamento holístico. Brincar proporciona desenvolvimento neuropsicomotor. O presente estudo tem como objetivos investigar a opinião de fisioterapeutas que atuam em neuropediatria sobre a utilização do brinquedo em sua prática clínica e verificar sua possível utilização em intervenções junto a crianças com paralisia cerebral. Utiliza-se inicialmente de questionário de opinião junto a 50 fisioterapeutas das diversas clínicas da Associação de Apoio a Criança com Deficiência, AACD - SP, verificando a utilização de brinquedos face aos diversos objetivos fisioterapeuticos; a seguir, realiza observação de 60 atendimentos, em fisioterapia aquática e de solo, de crianças com paralisia cerebral, identificando a utilização de cada categoria de brinquedo relativo ao objetivo terapêutico. Os dados obtidos no questionário revelaram em ordem decrescente utilização de: brinquedos sensório-motores 57,4%, para ganho de equilíbrio (E); 22,2% para coordenação motora (CM); 18,5% para aquisições posturais (AP) e 2% para relaxamento muscular (RM). Em relação aos jogos de faz-de-conta: 37% (E); 39% (AP) e 24% (CM).Para os jogos de regras: 54% (E); 35% (CM); 11% (AP). Com os jogos de montagem: 52% (CM); 24% (E); 24% (AP). Os dados da observação revelaram que os principais objetivos terapêuticos visados com utilização de brinquedos foram: alongamento, primeiro 10 ; fortalecimento muscular, equilíbrio e treino de marcha de 10 a 40 . Quanto à modalidade de brinquedo observada houve predomínio do faz de conta no início e no fim da sessão e das demais categorias no meio, de forma intercalada. Os dados da observação coincidiram com os do questionário revelando utilização sistemática de brinquedos com objetivos fisioterapeuticos.(AU)
Resumo:
Computer programs have been developed to enable the coordination of fuses and overcurrent relays for radial power systems under estimated fault current conditions. The grading curves for these protection devices can be produced on a graphics terminal and a hard copy can be obtained. Additional programs have also been developed which could be used to assess the validity of relay settings (obtained under the above conditions) when the transient effect is included. Modelling of a current transformer is included because transformer saturation may occur if the fault current is high, and hence the secondary current is distorted. Experiments were carried out to confirm that distorted currents will affect the relay operating time, and it is shown that if the relay current contains only a small percentage of harmonic distortion, the relay operating time is increased. System equations were arranged to enable the model to predict fault currents with a generator transformer incorporated in the system, and also to include the effect of circuit breaker opening, arcing resistance, and earthing resistance. A fictitious field winding was included to enable more accurate prediction of fault currents when the system is operating at both lagging and leading power factors prior to the occurrence of the fault.
Resumo:
This work test the relationship of performance and legal form of microfinance institutions (MFI), in our work MFI can be banks, non-governmental organizations (NGO), cooperatives, non-banks financial institutions (NBFI) or rural banks. We use linear regression model, panel data and variables dummy for the legal forms. Our samples are 243 MFI from all continents, except North America, in the period from 2007 to 2012. We found that bigger MFI generates higher profit, higher returns and higher self-sufficiency rates, so the growing can be a way for consolidation of MFI. For smaller MFI a way can be assimilation or merging with other MFI. Cooperatives, non-bank financial institutions and rural banks can serve more customers, causing greater impact on society, and get higher returns. This suggests the most appropriate legal form for microfinance market can be cooperatives, non-banks financial institutions or rural banks balancing social orientation and profit orientation.
Resumo:
The Acanthuridae family is a representative group from the marine fish that plays a key role in ecological dynamics of coral reefs. Three species are common along coastal reefs of Western Atlantic: Acanthurus coeruleus, Acanthurus bahianus and Acanthurus chirurgus. In the present study, cytogenetic data are presented for these three species Acanthurus based on classical cytogenetic methods and mapping of repetitive sequences such as ribosomal 18S and 5S rDNA and telomeric repeats to improve their karyotype evolutionary analyses. The cytogenetic pattern of these species indicated sequential steps of chromosomal rearrangements dating back 19 to 5 millions of years ago (M.a.) that accounted for their interspecific differences. A. coeruleus (2n=48; 2sm+4st+42a), A. bahianus (2n=36; 12m+2sm+4st+18a) and A. chirurgus (2n=34; 12m+2sm+4st+16a) share an older set of three chromosomal pairs that were originated through pericentric inversions. A set of six large metacentric pairs formed by Robertsonian (Rb) translocations found in A. bahianus and A. chirurgus and a putative in tandem fusion found in A. chirurgus are more recent events. The lack of interstitial telomeric sequences (ITS) in spite of several centric fusions in A. bahianus and A. chirurgus might be related to the long period of time after their occurrence (estimated in 5 M.a.). Furthermore, the homeologies among the chromosome pairs bearing ribosomal genes, in addition to other structural features, highlight large conserved chromosomal regions in the three species. Our findings indicate that macrostructural changes occurred during the cladogenesis of these species were not followed by conspicuous microstructural rearrangements in the karyotypes.
Resumo:
The present proposal for intervention examines the issue of public procurements carried out by a military organization on a Federal Public Administration. The main objective of this paper is to propose a model of strategic planning based on the Balanced Scorecard for the public procurement system, which contributes to increased efficiency, efficacy and effectiveness of acquisitions made in the Air Base of Natal city. Therefore, Structured interviews were used in order to make a diagnosis of the current reality of the procurement system along with the main requirement sectors of BANT, as well as the adaptation of the prospects of the BSC based on literature review. The technique used for the analysis of the interviews was the analysis of content whose results contributed to the preparation of the conceptual Strategic Map which was submitted to validation through a Focal Group. It was concluded through the analysis of the interviews, that the system of purchases of BANT is in a tactical profile because of low interaction between the system of purchases and the requirement sectors, aiming only at the “economicity” of acquisition in opposition of the effectiveness of material acquired, the lack of training of the elements which build the system and the absence of a proper planning. It is intended with thecreation of this proposal to contribute to the improvement of management with a focus on results in public administration as well as increasing efficiency, efficacy and effectiveness of public procurements. Whereas for the particular case the measurement of the results can only be performed after at least a year of its implementation, the present research constitutes a proposal of intervention.
Resumo:
The unprecedented and relentless growth in the electronics industry is feeding the demand for integrated circuits (ICs) with increasing functionality and performance at minimum cost and power consumption. As predicted by Moore's law, ICs are being aggressively scaled to meet this demand. While the continuous scaling of process technology is reducing gate delays, the performance of ICs is being increasingly dominated by interconnect delays. In an effort to improve submicrometer interconnect performance, to increase packing density, and to reduce chip area and power consumption, the semiconductor industry is focusing on three-dimensional (3D) integration. However, volume production and commercial exploitation of 3D integration are not feasible yet due to significant technical hurdles.
At the present time, interposer-based 2.5D integration is emerging as a precursor to stacked 3D integration. All the dies and the interposer in a 2.5D IC must be adequately tested for product qualification. However, since the structure of 2.5D ICs is different from the traditional 2D ICs, new challenges have emerged: (1) pre-bond interposer testing, (2) lack of test access, (3) limited ability for at-speed testing, (4) high density I/O ports and interconnects, (5) reduced number of test pins, and (6) high power consumption. This research targets the above challenges and effective solutions have been developed to test both dies and the interposer.
The dissertation first introduces the basic concepts of 3D ICs and 2.5D ICs. Prior work on testing of 2.5D ICs is studied. An efficient method is presented to locate defects in a passive interposer before stacking. The proposed test architecture uses e-fuses that can be programmed to connect or disconnect functional paths inside the interposer. The concept of a die footprint is utilized for interconnect testing, and the overall assembly and test flow is described. Moreover, the concept of weighted critical area is defined and utilized to reduce test time. In order to fully determine the location of each e-fuse and the order of functional interconnects in a test path, we also present a test-path design algorithm. The proposed algorithm can generate all test paths for interconnect testing.
In order to test for opens, shorts, and interconnect delay defects in the interposer, a test architecture is proposed that is fully compatible with the IEEE 1149.1 standard and relies on an enhancement of the standard test access port (TAP) controller. To reduce test cost, a test-path design and scheduling technique is also presented that minimizes a composite cost function based on test time and the design-for-test (DfT) overhead in terms of additional through silicon vias (TSVs) and micro-bumps needed for test access. The locations of the dies on the interposer are taken into consideration in order to determine the order of dies in a test path.
To address the scenario of high density of I/O ports and interconnects, an efficient built-in self-test (BIST) technique is presented that targets the dies and the interposer interconnects. The proposed BIST architecture can be enabled by the standard TAP controller in the IEEE 1149.1 standard. The area overhead introduced by this BIST architecture is negligible; it includes two simple BIST controllers, a linear-feedback-shift-register (LFSR), a multiple-input-signature-register (MISR), and some extensions to the boundary-scan cells in the dies on the interposer. With these extensions, all boundary-scan cells can be used for self-configuration and self-diagnosis during interconnect testing. To reduce the overall test cost, a test scheduling and optimization technique under power constraints is described.
In order to accomplish testing with a small number test pins, the dissertation presents two efficient ExTest scheduling strategies that implements interconnect testing between tiles inside an system on chip (SoC) die on the interposer while satisfying the practical constraint that the number of required test pins cannot exceed the number of available pins at the chip level. The tiles in the SoC are divided into groups based on the manner in which they are interconnected. In order to minimize the test time, two optimization solutions are introduced. The first solution minimizes the number of input test pins, and the second solution minimizes the number output test pins. In addition, two subgroup configuration methods are further proposed to generate subgroups inside each test group.
Finally, the dissertation presents a programmable method for shift-clock stagger assignment to reduce power supply noise during SoC die testing in 2.5D ICs. An SoC die in the 2.5D IC is typically composed of several blocks and two neighboring blocks that share the same power rails should not be toggled at the same time during shift. Therefore, the proposed programmable method does not assign the same stagger value to neighboring blocks. The positions of all blocks are first analyzed and the shared boundary length between blocks is then calculated. Based on the position relationships between the blocks, a mathematical model is presented to derive optimal result for small-to-medium sized problems. For larger designs, a heuristic algorithm is proposed and evaluated.
In summary, the dissertation targets important design and optimization problems related to testing of interposer-based 2.5D ICs. The proposed research has led to theoretical insights, experiment results, and a set of test and design-for-test methods to make testing effective and feasible from a cost perspective.
Resumo:
[EN]Social robots are receiving much interest in the robotics community. The most important goal for such robots lies in their interaction capabilities. An attention system is crucial, both as a filter to center the robot’s perceptual resources and as a mean of letting the observer know that the robot has intentionality. In this paper a simple but flexible and functional attentional model is described. The model, which has been implemented in an interactive robot currently under development, fuses both visual and auditive information extracted from the robot’s environment, and can incorporate knowledge-based influences on attention.
Resumo:
Dissertação apresentada à Escola Superior de Educação de Paula Frassinetti para a obtenção do grau de mestre em Ciências da Educação, especialização em Educação Especial.
Resumo:
When writing teachers enter the classroom, they often bring with them a deep faith in the power of literacy to rectify social inequalities and improve their students’ social and economic standing. It is this faith—this hope for change—that draws some writing teachers to locations of social and economic hardship. I am interested in how teachers and theorists construct their own narratives of social mobility, possibility, and literacy. My dissertation analyzes the production and expression of beliefs about literacy in the narratives of a diverse group of writing teachers and theorists, from those beginning their careers to those who are published and widely read. The central questions guiding this study are: How do teachers’ and theorists’ narratives of becoming literate intersect with literacy theories? and How do such literacy narratives intersect with beliefs in the power of literacy to improve individuals’ lives socially, economically, and personally? I contend that the professional literature needs to address more fully how teachers’ and theorists’ personal histories with literacy shape what they see as possible (and desirable) for students, especially those from marginalized communities. A central focus of the dissertation is on how teachers and theorists attempt to resolve a paradox they are likely to encounter in narratives about literacy. On one hand, they are immersed in a popular culture that cherishes narrative links between literacy and economic advancement (and, further, between such advancement and a “good life”). On the other hand, in professional discourse and in teacher preparation courses, they are likely to encounter narratives that complicate an assumed causal relationship between literacy and economic progress. Understanding, through literacy narratives, how teachers and theorists chart a practical path through or around this paradox can be beneficial to literacy education in three ways. First, it can offer direction in professional development and teacher education, addressing how teachers negotiate the boundaries between personal experience, theory, and pedagogy. Second, it can help teachers create spaces wherein students can explore the impact of paradoxical views about the role of literacy on their own lives. Finally, it can offer direction in public policy discourse, extending awareness of what we want—and need—from English language arts education in the twenty-first century. To explore these issues, I draw on case studies and ethnographic observation as well as narrative inquiry into teachers’ and theorists’ published literacy narratives. I situate my findings within three interrelated frames: 1) the narratives of new teachers, 2) the published works of literacy educators and theorists, and 3) my own literacy narrative. My first chapter, “Beyond Hope,” explores the tenuous connections between hope and critique in literacy studies and provides a methodological overview of the study. I argue that scholarship must move beyond a singular focus on either hope or critique in order to identify the transformative potential of literacy in particular circumstances. Analyzing literacy narratives provides a way of locating a critically informed sense of possibility. My second chapter, “Making Teachers, Making Literacy,” explores the intersection between teachers’ lives and the theories they study, based on qualitative analysis of a preservice course for secondary education English teachers. I examine how these preservice English teachers understood literacy, how their narratives of becoming literate and teaching English connected—and did not connect—with theoretical and pedagogical positions, and how these stories might inform their future work as practitioners. Centering primarily on preservice teachers who resisted Nancie Atwell’s pedagogy of possibility because they found it too good to be true, this research concentrates on moments of disjuncture, as expressed in class discussion and in one-on-one interviews, when literacy theories failed to align with aspiring teachers’ understandings of their own experiences and also with what they imagined as possible in disadvantaged educational settings. In my third and fourth chapters, I analyze the narratives of celebrated teachers and theorists who put forth an agenda that emphasizes possibilities through literacy, examining how they negotiate the relationship between their own literacy stories and literacy theories. Specifically, I investigate the narratives of three proponents of critical literacy: Mike Rose, Paulo Freire, and Myles Horton, all highly respected literacy teachers whose working-class backgrounds influenced their commitment to teaching in disenfranchised communities. In chapter 3, “Reading Lives on the Boundary,” I demonstrate how Mike Rose’s 1989 autobiographical text, Lives on the Boundary, juxtaposes rhetorics of mobility with critiques of such possibility. Through an analysis of work published in professional journals, I offer a reception history of Rose’s narrative, focusing specifically on how teachers have negotiated the tension between hope and critique. I follow this analysis with three case studies, drawn from a larger sampling, that inquire into the personal connections that writing teachers make with Lives on the Boundary. The teachers in this study, who provided written responses and participated in audio-recorded follow-up interviews, were asked to compare Rose’s story to their own stories, considering how their personal literacy histories influenced their teaching. My findings illustrate how a group of teachers and theorists have projected their own assessments of what literacy and higher education can and cannot accomplish onto this influential text. In my fourth chapter, “Horton and Freire’s Road as Literacy Narrative,” I concentrate on Myles Horton and Paulo Freire’s 1990 collaborative spoken book, We Make the Road by Walking. Central to my analysis are the educators’ stories about their formative years, including their own primary and secondary education experiences. I argue that We Make the Road by Walking demonstrates how theories of literacy cannot be divorced from personal histories. I begin by examining the spoken book as a literacy narrative that fuses personal and theoretical knowledge, focusing specifically on its authors’ ideas on theory. Drawing on Bakhtin’s notion of the chronotope—the intersection of time and space within narrative—I then explore the literacy narratives emerging from the production process of the book, in a video production about Horton and Freire’s meeting, and ultimately in the two men’s reflections on their childhood years (Dialogic). Interspersed with these accounts is archival material on the book’s editorial production that illustrates the value of increased dialogue between personal history and theories of literacy. My fifth chapter is both a reflective analysis and a qualitative study of my work at a men’s medium-high security prison in Illinois, where I conducted research and served as the instructor of an upper-level writing course, “Writing for a Change,” in the spring of 2009. Entitled “Doing Time with Literacy Narratives,” this chapter explores the complex ways in which literacy and incarceration are configured in students’ narratives as well as my own. With and against students’ stories, I juxtapose my own experiences with literacy, particularly in relation to being the son of an imprisoned father. In exploring the intersections between such stories, I demonstrate how literacy narratives can function as a heuristic for exploring beliefs about literacy between teachers and students both inside and outside of the prison-industrial complex. My conclusion pulls together the various themes that emerged in the three frames, from the making of new teachers to the published literacy narratives of teachers and theorists to my own literacy narrative. Writing teachers encounter considerable pressure to align their curricula with one or another theory of literacy, which has the effect of negating the authority of knowledge about literacy gleaned from experience as readers and writers. My dissertation contends that there is much to be gained by finding ways of articulating theories of literacy that encompass teachers’ knowledge of reading and writing as expressed in personal narratives of literacy. While powerful cultural rhetorics of upward social mobility often neutralize the critical potential of teachers’ own narratives of literacy—potential that has been documented by scholars in writing studies and allied disciplines—this is not always the case. The chapters in this dissertation offer evidence that hopeful and critical positions on the transformational possibilities of literacy are not mutually exclusive.
Resumo:
Mestrado, Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico, 21 de Março de 2016, Universidade dos Açores (Relatório de Estágio).
Resumo:
The long-term adverse effects on health associated with air pollution exposure can be estimated using either cohort or spatio-temporal ecological designs. In a cohort study, the health status of a cohort of people are assessed periodically over a number of years, and then related to estimated ambient pollution concentrations in the cities in which they live. However, such cohort studies are expensive and time consuming to implement, due to the long-term follow up required for the cohort. Therefore, spatio-temporal ecological studies are also being used to estimate the long-term health effects of air pollution as they are easy to implement due to the routine availability of the required data. Spatio-temporal ecological studies estimate the health impact of air pollution by utilising geographical and temporal contrasts in air pollution and disease risk across $n$ contiguous small-areas, such as census tracts or electoral wards, for multiple time periods. The disease data are counts of the numbers of disease cases occurring in each areal unit and time period, and thus Poisson log-linear models are typically used for the analysis. The linear predictor includes pollutant concentrations and known confounders such as socio-economic deprivation. However, as the disease data typically contain residual spatial or spatio-temporal autocorrelation after the covariate effects have been accounted for, these known covariates are augmented by a set of random effects. One key problem in these studies is estimating spatially representative pollution concentrations in each areal which are typically estimated by applying Kriging to data from a sparse monitoring network, or by computing averages over modelled concentrations (grid level) from an atmospheric dispersion model. The aim of this thesis is to investigate the health effects of long-term exposure to Nitrogen Dioxide (NO2) and Particular matter (PM10) in mainland Scotland, UK. In order to have an initial impression about the air pollution health effects in mainland Scotland, chapter 3 presents a standard epidemiological study using a benchmark method. The remaining main chapters (4, 5, 6) cover the main methodological focus in this thesis which has been threefold: (i) how to better estimate pollution by developing a multivariate spatio-temporal fusion model that relates monitored and modelled pollution data over space, time and pollutant; (ii) how to simultaneously estimate the joint effects of multiple pollutants; and (iii) how to allow for the uncertainty in the estimated pollution concentrations when estimating their health effects. Specifically, chapters 4 and 5 are developed to achieve (i), while chapter 6 focuses on (ii) and (iii). In chapter 4, I propose an integrated model for estimating the long-term health effects of NO2, that fuses modelled and measured pollution data to provide improved predictions of areal level pollution concentrations and hence health effects. The air pollution fusion model proposed is a Bayesian space-time linear regression model for relating the measured concentrations to the modelled concentrations for a single pollutant, whilst allowing for additional covariate information such as site type (e.g. roadside, rural, etc) and temperature. However, it is known that some pollutants might be correlated because they may be generated by common processes or be driven by similar factors such as meteorology. The correlation between pollutants can help to predict one pollutant by borrowing strength from the others. Therefore, in chapter 5, I propose a multi-pollutant model which is a multivariate spatio-temporal fusion model that extends the single pollutant model in chapter 4, which relates monitored and modelled pollution data over space, time and pollutant to predict pollution across mainland Scotland. Considering that we are exposed to multiple pollutants simultaneously because the air we breathe contains a complex mixture of particle and gas phase pollutants, the health effects of exposure to multiple pollutants have been investigated in chapter 6. Therefore, this is a natural extension to the single pollutant health effects in chapter 4. Given NO2 and PM10 are highly correlated (multicollinearity issue) in my data, I first propose a temporally-varying linear model to regress one pollutant (e.g. NO2) against another (e.g. PM10) and then use the residuals in the disease model as well as PM10, thus investigating the health effects of exposure to both pollutants simultaneously. Another issue considered in chapter 6 is to allow for the uncertainty in the estimated pollution concentrations when estimating their health effects. There are in total four approaches being developed to adjust the exposure uncertainty. Finally, chapter 7 summarises the work contained within this thesis and discusses the implications for future research.