Optical emission of strained direct-band-gap Ge quantum well embedded inside InGaAs alloy layers

We studied the optical properties of a strain-induced direct-band-gap Ge quantum well embedded in InGaAs. We showed that the band offsets depend on the electronegativity of the layer in contact with Ge, leading to different types of optical transitions in the heterostructure. When group-V atoms compose the interfaces, only electrons are confined in Ge, whereas both carriers are confined when the interface consists of group-III atoms. The different carrier confinement results in different emission dynamics behavior. This study provides a solution to obtain efficient light emission from Ge.

Supporting the Model-Driven Development of Real-time Embedded Systems with Run-Time Monitoring and Animation via Highly Customizable Code Generation

This paper presents a vision that allows the combined use of model-driven engineering, run-time monitoring, and animation for the development and analysis of components in real-time embedded systems. Key building block in the tool environment supporting this vision is a highly-customizable code generation process. Customization is performed via a configuration specification which describes the ways in which input is provided to the component, the ways in which run-time execution information can be observed, and how these observations drive animation tools. The environment is envisioned to be suitable for different activities ranging from quality assurance to supporting certification, teaching, and outreach and will be built exclusively with open source tools to increase impact. A preliminary prototype implementation is described.

Polymer Light-Emitting Electrochemical Cells with Embedded Bipolar Electrodes: Visualizing Bipolar Electrochemistry in Solid State

The work presented in this thesis examines the properties of BPEs of various configurations and under different operating conditions in a large planar LEC system. Detailed analysis of time-lapsed fluorescence images allows us to calculate the doping propagation speed from the BPEs. By introducing a linear array of BPEs or dispersed ITO particles, multiple light-emitting junctions or a bulk homojunction have been demonstrated. In conclusion, it has been observed that both applied bias voltages and sizes of BPEs affected the electrochemical doping from the BPE. If the applied bias voltage was initially not sufficiently high enough, a delay in appearance of doping from the BPE would take place. Experiments of parallel BPEs with different sizes (large, medium, small) demonstrate that the potential difference across the BPEs has played a vital role in doping initiation. Also, the p-doping propagation distance from medium-sized BPE has displayed an exponential growth over the time-span of 70 seconds. Experiments with a linear array of BPEs with the same size demonstrate that the doping propagation speed of each floating BPE was the same regardless of its position between the driving electrodes. Probing experiments under high driving voltages further demonstrated the potential of having a much more efficient light emission from an LEC with multiple BPEs.

Utility of sarcoma-specific fusion gene analysis in paraffin-embedded material for routine diagnosis at a specialist centre.

AIMS: Diagnosis of soft tissue sarcomas can be difficult. It can be aided by detection of specific genetic aberrations in many cases. This study assessed the utility of a molecular genetics/cytogenetics service as part of the routine diagnostic service at the Royal Marsden Hospital. METHODS: A retrospective audit was performed over a 15-month period to evaluate the diagnostic usefulness for soft tissue sarcomas with translocations of fluorescence in situ hybridisation (FISH) and reverse-transcriptase PCR (RT-PCR) in paraffin-embedded (PE) material. Results were compared with histology, and evaluated. RESULTS: Molecular investigations were performed on PE material in 158 samples (total 194 RT-PCR and 174 FISH tests), of which 85 were referral cases. Synovial sarcoma, Ewing sarcoma and low-grade fibromyxoid sarcoma were the most commonly tested tumours. Myxoid liposarcoma showed the best histological and molecular concordance, and alveolar rhabdomyosarcoma showed the best agreement between methods. FISH had a higher sensitivity for detecting tumours (73%, compared with 59% for RT-PCR) with a better success rate than RT-PCR, although the latter was specific in identifying the partner gene for each fusion. In particular, referral blocks in which methods of tissue fixation and processing were not certain resulted in higher RT-PCR failure rates. CONCLUSIONS: FISH and RT-PCR on PE tissue are practical and effective ancillary tools in the diagnosis of soft tissue sarcomas. They are useful in confirming doubtful histological diagnoses and excluding malignant diagnoses. PCR is less sensitive than FISH, and the use of both techniques is optimal for maximising the detection rate of translocation-positive sarcomas.

The making of professionals: Embedded civil society development in a transition country

The paper addresses the development of non-governmental organisations (NGOs) in transition settings. Caught in the balance of knowledge exchange and translation of ideas from abroad, organisations in turbulent setting legitimise their existence by learning through professional networks. By association, organisational actors gain acknowledgement by their sector by traversing the corridors of influence provided by international partnerships. What they learn is how to conduct themselves as agents of change in society, and how to deliver on stated missions and goals, therefore, legitimising their presence in a budding civil society at home. The paper presents a knowledge production and learning practices framework which indicates a presence of dual identity of NGOs - their “embeddedness” locally and internationally. Selected framework dimensions and qualitative case study themes are discussed with respect to the level of independence of organisational actors in the East from their partners in the West in a post-socialist context. A professional global civil society as organisations are increasingly managed in similar, professional ways (Anheier & Themudo 2002). Here knowledge “handling” and knowledge “translation” take place through partnership exchanges fostering capable and/or competitive change-inducing institutions (Czarniawska & Sevon 2005; Hwang & Suarez 2005). How professional identity presents itself in the third sector, as well as the sector’s claim to expertise, need further attention, adding to ongoing discussions on professions in institutional theory (Hwang & Powell 2005; Scott 2008; Noordegraaf 2011). A conceptual framework on the dynamic involved for the construction professional fields follows: • Multiple case analysis provides a taxonomy for understanding what is happening in knowledge transition, adaptation, and organisational learning capacity for NGOs with respect to their role in a networked civil society. With the model we can observe the types of knowledge produced and learning employed by organisations. • There are elements of professionalisation in third sector work organisational activity with respect to its accreditation, sources and routines of learning, knowledge claims, interaction with the statutory sector, recognition in cross-sector partnerships etc. • It signals that there is a dual embeddedness in the development of the sector at the core to the shaping the sector’s professional status. This is instrumental in the NGOs’ goal to gain influence as institutions, as they are only one part of a cross-sector mission to address complex societal problems The case study material highlights nuances of knowledge production and learning practices in partnerships, with dual embeddedness a main feature of the findings. This provides some clues to how professionalisation as expert-making takes shape in organisations: • Depending on the type of organisations’ purpose, over its course of development there is an increase in participation in multiple networks, as opposed to reliance on a single strategic partner for knowledge artefacts and practices; • Some types of organisations are better connected within international and national networks than others and there seem to be preferences for each depending on the area of work; • The level of interpretation or adaptation of the knowledge artefacts is related to an organisation’s embeddedness locally, in turn giving it more influence within the network of key institutions; An overreaching theme across taxonomy categories (Table 1)is “professionalisation” or developing organisational “expertise”, embodied at the individual, organisational, and sector levels. Questions relevant to the exercise of power arise: Is competence in managing a dual embeddedness signals the development of a dual identity in professionalisation? Is professionalisation in this sense a sign of organisations maturing into more capable partners to the arguably more experienced (Western) institutions, shifting the power balance? Or is becoming more professional a sign of domestication to the agenda of certain powerful stakeholders, who define the boundaries of the profession? Which dominant dynamics can be observed in a broadly-defined transition country civil society, where individual participation in the form of activism may be overtaking the traditional forms of organised development work, especially with the spread of social media?

CoO nanoparticles embedded in three-dimensional nitrogen/sulfur co-doped carbon nanofiber networks as a bifunctional catalyst for oxygen reduction/evolution reactions

High-performance and low-cost bifunctional electrocatalysts play crucial roles in oxygen reduction and evolution reactions. Herein, a novel three-dimensional (3D) bifunctional electrocatalyst was prepared by embedding CoO nanoparticles into nitrogen and sulfur co-doped carbon nanofiber networks (denoted as CoO@N/S-CNF) through a facile approach. The carbon nanofiber networks were derived from a nanostructured biological material which provided abundant functional groups to nucleate and anchor nanoparticles while retaining its interconnected 3D porous structure. The composite possesses a high specific surface area and graphitization degree, which favors both mass transport and charge transfer for electrochemical reaction. The CoO@N/S-CNF not only exhibits highly efficient catalytic activity towards oxygen reduction reaction (ORR) in alkaline media with an onset potential of about 0.84 V, but also shows better stability and stronger resistance to methanol than Pt/C. Furthermore, it only needs an overpotential of 1.55 V to achieve a current density of 10 mA cm^-2, suggesting that it is an efficient electrocatalyst for oxygen evolution reaction (OER). The ΔE value (oxygen electrode activity parameter) of CoO@N/S-CNF is calculated to be 0.828 V, which demonstrates that the composite could be a promising bifunctional electrocatalyst for both ORR and OER.

A Phase II Biomarker-Embedded Study of Lapatinib plus Capecitabine as First-line Therapy in Patients with Advanced or Metastatic Gastric Cancer

An exploratory phase II biomarker-embedded trial (LPT109747; NCT00526669) designed to determine the association of lapatinib-induced fluoropyrimidine gene changes with efficacy of lapatinib plus capecitabine as first-line treatment for advanced gastric cancer or gastroesophageal junction adenocarcinoma independent of tumor HER2 status. Tumor biopsies obtained before and after 7-day lapatinib (1,250 mg) to analyze changes in gene expression, followed by a 14-day course of capecitabine (1,000 mg/m(2) twice daily, 14/21 days) plus lapatinib 1,250 mg daily. Blood samples were acquired for pharmacokinetic analysis. Primary clinical objectives were response rate (RR) and 5-month progression-free survival (PFS). Secondary objectives were overall survival (OS), PFS, time to response, duration of response, toxicity, and identification of associations between lapatinib pharmacokinetics and biomarker endpoints. Primary biomarker objectives were modulation of 5-FU-pathway genes by lapatinib, effects of germline SNPs on treatment outcome, and trough steady-state plasma lapatinib concentrations. Sixty-eight patients were enrolled; (75% gastric cancer, 25% gastroesophageal junction). Twelve patients (17.9%) had confirmed partial response, 31 (46.3%) had stable disease, and 16 (23.9%) had progressive disease. Median PFS and OS were 3.3 and 6.3 months, respectively. Frequent adverse events included diarrhea (45%), decreased appetite (39%), nausea (36%), and fatigue (36%). Lapatinib induced no changes in gene expression from baseline and no significant associations were found for SNPs analyzed. Elevated baseline HER3 mRNA expression was associated with a higher RR (33% vs. 0%; P = 0.008). Lapatinib plus capecitabine was well tolerated, demonstrating modest antitumor activity in patients with advanced gastric cancer. The association of elevated HER3 and RR warrants further investigation as an important player for HER-targeted regimens in combination with capecitabine

Generic wind estimation and compensation based on residual generators and higher-order sliding mode schemes

This master thesis proposes a solution to the approach problem in case of unknown severe microburst wind shear for a fixed-wing aircraft, accounting for both longitudinal and lateral dynamics. The adaptive controller design for wind rejection is also addressed, exploiting the wind estimation provided by suitable estimators. It is able to successfully complete the final approach phase even in presence of wind shear, and at the same time aerodynamic envelope protection is retained. The adaptive controller for wind compensation has been designed by a backstepping approach and feedback linearization for time-varying systems. The wind shear components have been estimated by higher-order sliding mode schemes. At the end of this work the results are provided, an autonomous final approach in presence of microburst is discussed, performances are analyzed, and estimation of the microburst characteristics from telemetry data is examined.

Approaches to Developing Educational Resources Using AI Embedded in Computer Game Technology. A Case Study: Primary School Literacy

In this extended abstract, we discuss recent research at Worcester into the inclusion of AI into ‘Serious Games’. Serious Games research intends to harness the power of computer game technology to produce educational and training materials. We prefer the name ‘Immersive Environments’ (IEs) since this emphasises the human psychological dimension. Creation of compelling and convincing learning software requires a rich engagement of the learner, and a convincing learning experience. We believe that various aspects of the AI tradition can inform the production of such learning.

Online Alpha Wave detector: an Embedded hardware-software implementation

The recent trend on embedded system development opens a new prospect for applications that in the past were not possible. The eye tracking for sleep and fatigue detection has become an important and useful application in industrial and automotive scenarios since fatigue is one of the most prevalent causes of earth-moving equipment accidents. Typical applications such as cameras, accelerometers and dermal analyzers are present on the market but have some inconvenient. This thesis project has used EEG signal, particularly, alpha waves, to overcome them by using an embedded software-hardware implementation to detect these signals in real time

Development of a Wireless MEMS Multifunction Sensor System and Field Demonstration of Embedded Sensors for Monitoring Concrete Pavements, TR-637, 2016

Pavements tend to deteriorate with time under repeated traffic and/or environmental loading. By detecting pavement distresses and damage early enough, it is possible for transportation agencies to develop more effective pavement maintenance and rehabilitation programs and thereby achieve significant cost and time savings. The structural health monitoring (SHM) concept can be considered as a systematic method for assessing the structural state of pavement infrastructure systems and documenting their condition. Over the past several years, this process has traditionally been accomplished through the use of wired sensors embedded in bridge and highway pavement. However, the use of wired sensors has limitations for long-term SHM and presents other associated cost and safety concerns. Recently, micro-electromechanical sensors and systems (MEMS) and nano-electromechanical systems (NEMS) have emerged as advanced/smart-sensing technologies with potential for cost-effective and long-term SHM. This two-pronged study evaluated the performance of commercial off-the-shelf (COTS) MEMS sensors embedded in concrete pavement (Final Report Volume I) and developed a wireless MEMS multifunctional sensor system for health monitoring of concrete pavement (Final Report Volume II).

Resistive Embedded Heating for Homogeneous Curing of Composite Damage Repair

Thesis (Ph.D.)--University of Washington, 2016-08

Unlinked Embedded Graphs

This paper is a self-contained development of an invariant of graphs embedded in three-dimensional Euclidean space using the Jones polynomial and skein theory. Some examples of the invariant are computed. An unlinked embedded graph is one that contains only trivial knots or links. Examples show that the invariant is sufficiently powerful to distinguish some different unlinked embeddings of the same graph.

Decision making models embedded into a web-based tool for assessing pest infestation risk

Current practices in agricultural management involve the application of rules and techniques to ensure high quality and environmentally friendly production. Based on their experience, agricultural technicians and farmers make critical decisions affecting crop growth while considering several interwoven agricultural, technological, environmental, legal and economic factors. In this context, decision support systems and the knowledge models that support them, enable the incorporation of valuable experience into software systems providing support to agricultural technicians to make rapid and effective decisions for efficient crop growth. Pest control is an important issue in agricultural management due to crop yield reductions caused by pests and it involves expert knowledge. This paper presents a formalisation of the pest control problem and the workflow followed by agricultural technicians and farmers in integrated pest management, the crop production strategy that combines different practices for growing healthy crops whilst minimising pesticide use. A generic decision schema for estimating infestation risk of a given pest on a given crop is defined and it acts as a metamodel for the maintenance and extension of the knowledge embedded in a pest management decision support system which is also presented. This software tool has been implemented by integrating a rule-based tool into web-based architecture. Evaluation from validity and usability perspectives concluded that both agricultural technicians and farmers considered it a useful tool in pest control, particularly for training new technicians and inexperienced farmers.