815 resultados para Distribution management systems
Resumo:
Safety Management Systems in aviation generate training programs that develop skills needed to perform safety functions. The objective of this study is to show that, in groups, individuals need to have interpersonal skills and, in particular, ability to communicate with others, to listen, and to influence. It is for this reason that Social Skills Training is important in Aviation. Professionals trained in social skills are more likely to identify threats and risks caused by interpersonal situations, be assertive, and take appropriate action. As a contribution, this paper suggests a set of policies, procedures and practices for educating and training future professionals who will work in aviation safety.
Resumo:
Thesis (Master's)--University of Washington, 2016-08
Resumo:
Stormwater management has long been a critical societal and environmental challenge for communities. An increasing number of municipalities are turning to novel approaches such as green infrastructure to develop more sustainable stormwater management systems. However, there is a need to better understand the technological decision-making processes that lead to specific outcomes within urban stormwater governance systems. We used the social-ecological system (SES) framework to build a classification system for identifying significant variables that influence urban stormwater governance decisions related to green infrastructure adoption. To adapt the framework, we relied on findings from observations at national stormwater meetings in combination with a systematic literature review on influential factors related to green infrastructure adoption. We discuss our revisions to the framework that helped us understand the decision by municipal governments to adopt green infrastructure. Remaining research needs and challenges are discussed regarding the development of an urban stormwater SES framework as a classification tool for knowledge accumulation and synthesis.
Resumo:
Oomycete diseases cause significant losses across a broad range of crop and aquaculture commodities worldwide. These losses can be greatly reduced by disease management practices steered by accurate and early diagnoses of pathogen presence. Determinations of disease potential can help guide optimal crop rotation regimes, varietal selections, targeted control measures, harvest timings and crop post-harvest handling. Pathogen detection prior to infection can also reduce the incidence of disease epidemics. Classical methods for the isolation of oomycete pathogens are normally deployed only after disease symptom appearance. These processes are often-time consuming, relying on culturing the putative pathogen(s) and the availability of expert taxonomic skills for accurate identification; a situation that frequently results in either delayed application, or routine ‘blanket’ over-application of control measures. Increasing concerns about pesticides in the environment and the food chain, removal or restriction of their usage combined with rising costs have focussed interest in the development and improvement of disease management systems. To be effective, these require timely, accurate and preferably quantitatve diagnoses. A wide range of rapid diagnostic tools, from point of care immunodiagnostic kits to next generation nucleotide sequencing have potential application in oomycete disease management. Here we review currently-available as well as promising new technologies in the context of commercial agricultural production systems, considering the impacts of specific biotic and abiotic and other important factors such as speed and ease of access to information and cost effectiveness
Resumo:
Strategy is a highly topical subject among managers and since the world is constantlychanging it is also an important subject for companies’ competitive advantage and survival.At the same time experts in the field of strategic management describe western techniques ascomplex and ineffective while the Japanese techniques have been seen as unambiguous andcharacterized by focus on quality, productivity and teamwork. This calls for greaterknowledge in the Japanese management systems. Hoshin Kanri is a collection of Japanesebest strategic management practices and therefore an interesting target for our study. Thus, onthe one hand this study investigates the theory of Hoshin Kanri in order to give structure to itand provide a way for practitioner into the management system. On the other hand this studyinvestigates Hoshin Kanri in order to reveal how Japanese subsidiaries based in Sweden haveimplemented this strategic management system. This is firstly done by reviewing the existingliterature on the subject and secondly by a collective case study with in-depth interviewsconducted with managers at Japanese owned subsidiaries based in Sweden. There are somelimitations in this study. One is that the results of the study do not include all Japanesesubsidiaries in Sweden as not all companies participated in the study. Moreover, the study islimited by one individuals’ knowledge and perception of Hoshin Kanri in each of the threecompanies. The study contributes to the existing literature on the topic of Hoshin Kanri by;(1) structuring the literature and the existing models under one of two categories, namelycyclical or sequential; (2) providing a model that aims at making it more understandable andattractive for practitioner to apply; (3) initiating the mapping of the spread of Hoshin Kanriamong Japanese subsidiaries in Sweden and (4) providing a Swedish model for theapplication of HK in Japanese subsidiaries.
Resumo:
The red deer (Cervus elaphus) is currently one of the most widespread and abundant wild ungulates in the Iberian Peninsula and is extremely important both ecologically, as a key species for the functioning of the ecosystems, and economically, as a major game species. In Iberia, red deer populations are subjected to different management systems that may affect the physical condition of the individuals, with further consequences for population dynamics. Studies investigating the effects of management practices and environmental conditions on the performance of red deer are still rare regarding Mediterranean ecosystems. Much of the knowledge concerning the ecology of red deer and the impact of management on its physical condition is based on studies conducted in northern and central regions of Europe, where climatological features and management practices differ from those observed in the Mediterranean areas of Iberia. Studies on a biogeographical scale can provide important insights into the relationships between species and a particular environment and contribute to the development of more targeted and appropriate management practices. The optimisation of sampling procedures and the fine-tuning of pre-existing analytical techniques are also fundamental to a more cost-effective monitoring and, therefore, are of enormous value to wildlife managers. In this context, the main aims of this thesis were: 1) to optimise the procedures used to assess the physical condition of red deer; and 2) to identify relevant management and environmental factors affecting the nutritional condition and stress physiology of red deer in the Mediterranean ecosystems of Iberia, as well as any potential interactions between those factors. Two studies with a methodological focus, presented in the first part of the thesis, demonstrated that the physical condition of red deer can be evaluated more simply, using more cost- and time-effective procedures than those traditionally used: i) it was shown that only one kidney and its associated fat is enough to assess nutritional condition in red deer; and ii) the feasibility of using near infrared spectroscopy to predict the concentrations of stress hormone metabolites was demonstrated using faeces of red deer for the first time. Subsequently, two large-scale observational studies, conducted in representative red deer populations found in Mediterranean Iberia, highlighted the importance of considering seasonal environmental variations and variables related to hunting management practices to better understand the nutritional and physiological ecology of red deer. High population densities had adverse effects on the nutritional condition of the deer and were associated with increased stress levels in natural populations without supplementary feeding. Massive hunting events involving the use of hounds were also identified as a potential source of chronic stress in red deer. The research presented in this thesis has clear implications regarding the management and monitoring of red deer populations in Mediterranean environments and is intended to help wildlife managers to implement more effective monitoring programmes and sustainable management practices.
Resumo:
Tämän kandidaatintutkimuksen tarkoituksena on löytää vastaus siihen, miten vahva voi olla DRM-systeemi, ennen kuin kuluttajat eivät enää hyväksy sitä. DRM-systeemejä on monen tasoisia, mutta ne eivät ole soveltuvia sellaisenaan kaikille eri alustoille. Peliteollisuuden digitaalisten käyttöoikeuksien hallintajärjestelmillä on omanlaisensa lainalaisuudet kuin esimerkiksi musiikkiteollisuudella. Lisäksi on olemassa tietty tämän hetkinen hyväksytty DRM:n taso, josta voi olla vaarallista poiketa. Tutkimus on luonteeltaan laadullinen tutkimus. Työssä on sovellettu sekä diskurssi- että sisällönanalyysin oppeja. Tutkimuksen aineistona on erilaisten viestiketjujen tekstit, joiden pohjalta pyritään löytämään vastaus tutkimuskysymykseen. Ketjut on jaettu eri vahvuisiksi sen perusteella, miten vahva on DRM:ää koskeva uutinen, jonka pohjalta viestiketju on syntynyt. Koska aineisto on puhuttua kieltä ja sillä on aina oma merkityksensä kontekstissaan, ovat valitut menetelmät soveltuvia analysoimaan aineistoa. Eri ketjujen analyysien tuloksien pohjalta voidaan sanoa, että DRM ei voi olla sitä tasoa suurempi kuin mikä on sen hetkinen vallitseva taso. Jos tästä tasosta poiketaan pikkaisenkin, voi se aiheuttaa suurta närästystä kuluttajien keskuudessa, jopa siihen saakka, että yritys menettää tuloja. Sen hetkiseen tasoon on päästy erinäisten kokeilujen kautta, joista kuluttajat ovat kärsineet, joten he eivät suosiolla hyväksy yhtään sen suurempaa tasoa kuin mikä vallitsee sillä hetkellä. Jos yritys näkee, että tasoa on pakko tiukentaa, täytyy tiukennus tehdä pikkuhiljaa ja naamioida se lisäominaisuuksilla. Kuluttajat ovat tietoisia omista oikeuksistaan, eivätkä he helpolla halua luopua niistä yhtään sen enempää kuin on tarpeellista.
Resumo:
The process of building Data Warehouses (DW) is well known with well defined stages but at the same time, mostly carried out manually by IT people in conjunction with business people. Web Warehouses (WW) are DW whose data sources are taken from the web. We define a flexible WW, which can be configured accordingly to different domains, through the selection of the web sources and the definition of data processing characteristics. A Business Process Management (BPM) System allows modeling and executing Business Processes (BPs) providing support for the automation of processes. To support the process of building flexible WW we propose a two BPs level: a configuration process to support the selection of web sources and the definition of schemas and mappings, and a feeding process which takes the defined configuration and loads the data into the WW. In this paper we present a proof of concept of both processes, with focus on the configuration process and the defined data.
Resumo:
Beef businesses in northern Australia are facing increased pressure to be productive and profitable with challenges such as climate variability and poor financial performance over the past decade. Declining terms of trade, limited recent gains in on-farm productivity, low profit margins under current management systems and current climatic conditions will leave little capacity for businesses to absorb climate change-induced losses. In order to generate a whole-of-business focus towards management change, the Climate Clever Beef project in the Maranoa-Balonne region of Queensland trialled the use of business analysis with beef producers to improve financial literacy, provide a greater understanding of current business performance and initiate changes to current management practices. Demonstration properties were engaged and a systematic approach was used to assess current business performance, evaluate impacts of management changes on the business and to trial practices and promote successful outcomes to the wider industry. Focus was concentrated on improving financial literacy skills, understanding the business’ key performance indicators and modifying practices to improve both business productivity and profitability. To best achieve the desired outcomes, several extension models were employed: the ‘group facilitation/empowerment model’, the ‘individual consultant/mentor model’ and the ‘technology development model’. Providing producers with a whole-of-business approach and using business analysis in conjunction with on-farm trials and various extension methods proved to be a successful way to encourage producers in the region to adopt new practices into their business, in the areas of greatest impact. The areas targeted for development within businesses generally led to improvements in animal performance and grazing land management further improving the prospects for climate resilience.
Resumo:
The research investigates the feasibility of using web-based project management systems for dredging. To achieve this objective the research assessed both the positive and negative aspects of using web-based technology for the management of dredging projects. Information gained from literature review and prior investigations of dredging projects revealed that project performance, social, political, technical, and business aspects of the organization were important factors in deciding to use web-based systems for the management of dredging projects. These factors were used to develop the research assumptions. An exploratory case study methodology was used to gather the empirical evidence and perform the analysis. An operational prototype of the system was developed to help evaluate developmental and functional requirements, as well as the influence on performance, and on the organization. The evidence gathered from three case study projects, and from a survey of 31 experts, were used to validate the assumptions. Baselines, representing the assumptions, were created as a reference to assess the responses and qualitative measures. The deviation of the responses was used to evaluate for the analysis. Finally, the conclusions were assessed by validating the assumptions with the evidence, derived from the analysis. The research findings are as follows: 1. The system would help improve project performance. 2. Resistance to implementation may be experienced if the system is implemented. Therefore, resistance to implementation needs to be investigated further and more R&D work is needed in order to advance to the final design and implementation. 3. System may be divided into standalone modules in order to simplify the system and facilitate incremental changes. 4. The QA/QC conceptual approach used by this research needs to be redefined during future R&D to satisfy both owners and contractors. Yin (2009) Case Study Research Design and Methods was used to develop the research approach, design, data collection, and analysis. Markus (1983) Resistance Theory was used during the assumptions definition to predict potential problems to the implementation of web-based project management systems for the dredging industry. Keen (1981) incremental changes and facilitative approach tactics were used as basis to classify solutions, and how to overcome resistance to implementation of the web-based project management system. Davis (1989) Technology Acceptance Model (TAM) was used to assess the solutions needed to overcome the resistances to the implementation of web-base management systems for dredging projects.
Resumo:
Climate change and carbon (C) sequestration are a major focus of research in the twenty-first century. Globally, soils store about 300 times the amount of C that is released per annum through the burning of fossil fuels (Schulze and Freibauer 2005). Land clearing and introduction of agricultural systems have led to rapid declines in soil C reserves. The recent introduction of conservation agricultural practices has not led to a reversing of the decline in soil C content, although it has minimized the rate of decline (Baker et al. 2007; Hulugalle and Scott 2008). Lal (2003) estimated the quantum of C pools in the atmosphere, terrestrial ecosystems, and oceans and reported a “missing C” component in the world C budget. Though not proven yet, this could be linked to C losses through runoff and soil erosion (Lal 2005) and a lack of C accounting in inland water bodies (Cole et al. 2007). Land management practices to minimize the microbial respiration and soil organic C (SOC) decline such as minimum tillage or no tillage were extensively studied in the past, and the soil erosion and runoff studies monitoring those management systems focused on other nutrients such as nitrogen (N) and phosphorus (P).
Resumo:
Fault tolerance allows a system to remain operational to some degree when some of its components fail. One of the most common fault tolerance mechanisms consists on logging the system state periodically, and recovering the system to a consistent state in the event of a failure. This paper describes a general fault tolerance logging-based mechanism, which can be layered over deterministic systems. Our proposal describes how a logging mechanism can recover the underlying system to a consistent state, even if an action or set of actions were interrupted mid-way, due to a server crash. We also propose different methods of storing the logging information, and describe how to deploy a fault tolerant master-slave cluster for information replication. We adapt our model to a previously proposed framework, which provided common relational features, like transactions with atomic, consistent, isolated and durable properties, to NoSQL database management systems.
Resumo:
This dissertation investigates customer behavior modeling in service outsourcing and revenue management in the service sector (i.e., airline and hotel industries). In particular, it focuses on a common theme of improving firms’ strategic decisions through the understanding of customer preferences. Decisions concerning degrees of outsourcing, such as firms’ capacity choices, are important to performance outcomes. These choices are especially important in high-customer-contact services (e.g., airline industry) because of the characteristics of services: simultaneity of consumption and production, and intangibility and perishability of the offering. Essay 1 estimates how outsourcing affects customer choices and market share in the airline industry, and consequently the revenue implications from outsourcing. However, outsourcing decisions are typically endogenous. A firm may choose whether to outsource or not based on what a firm expects to be the best outcome. Essay 2 contributes to the literature by proposing a structural model which could capture a firm’s profit-maximizing decision-making behavior in a market. This makes possible the prediction of consequences (i.e., performance outcomes) of future strategic moves. Another emerging area in service operations management is revenue management. Choice-based revenue systems incorporate discrete choice models into traditional revenue management algorithms. To successfully implement a choice-based revenue system, it is necessary to estimate customer preferences as a valid input to optimization algorithms. The third essay investigates how to estimate customer preferences when part of the market is consistently unobserved. This issue is especially prominent in choice-based revenue management systems. Normally a firm only has its own observed purchases, while those customers who purchase from competitors or do not make purchases are unobserved. Most current estimation procedures depend on unrealistic assumptions about customer arriving. This study proposes a new estimation methodology, which does not require any prior knowledge about the customer arrival process and allows for arbitrary demand distributions. Compared with previous methods, this model performs superior when the true demand is highly variable.
Resumo:
Nowadays, Power grids are critical infrastructures on which everything else relies, and their correct behavior is of the highest priority. New smart devices are being deployed to be able to manage and control power grids more efficiently and avoid instability. However, the deployment of such smart devices like Phasor Measurement Units (PMU) and Phasor Data Concentrators (PDC), open new opportunities for cyber attackers to exploit network vulnerabilities. If a PDC is compromised, all data coming from PMUs to that PDC is lost, reducing network observability. Our approach to solve this problem is to develop an Intrusion detection System (IDS) in a Software-defined network (SDN). allowing the IDS system to detect compromised devices and use that information as an input for a self-healing SDN controller, which redirects the data of the PMUs to a new, uncompromised PDC, maintaining the maximum possible network observability at every moment. During this research, we have successfully implemented Self-healing in an example network with an SDN controller based on Ryu controller. We have also assessed intrinsic vulnerabilities of Wide Area Management Systems (WAMS) and SCADA networks, and developed some rules for the Intrusion Detection system which specifically protect vulnerabilities of these networks. The integration of the IDS and the SDN controller was also successful. \\To achieve this goal, the first steps will be to implement an existing Self-healing SDN controller and assess intrinsic vulnerabilities of Wide Area Measurement Systems (WAMS) and SCADA networks. After that, we will integrate the Ryu controller with Snort, and create the Snort rules that are specific for SCADA or WAMS systems and protocols.