Factors promoting the exposure to bioaerosols among crop workers

Introduction. Agricultural workers are among the professional groups most at risk of developing acute or chronic respiratory problems. Despite this fact, the etiology of these occupational diseases is poorly known, even in important sectors of agriculture such as the crops sector. Cereals can be colonized by a large number of fungal species throughout the plants' growth, but also during grain storage. Some of these fungi deliver toxins that can have a serious impact on human health when they are ingested via wheat products. Although International and European legislation on contaminants in food, including mycotoxins, include measures to ensure protection of public health by setting down the maximum levels for certain contaminants, the risks associated with the inhalation of such molecules during grain handling remains poorly documented. Goal of study. This project's objective was to characterize worker exposure to pathogenic, irritative or allergenic microorganisms and to identify the abiotic or biotic factors that reduce the growth of these microorganisms in crops. Indeed, the proliferation of microorganisms on wheat is dependent on temperature, rainfall and human disturbance (e.g. usage of tillage, addition of fungicides). A change in the concentration of these microorganisms in the substrate will directly result in a change in the concentration of aerosolized particles of the same microorganisms. Therefore, the exposure of worker to bioaérosols will also change. The Vaud region of Switzerland is a perfect region for conduct such a project as weather conditions vary and agricultural land management programs are divers at a small geographic scale. Methods. Bioaerosols and wheat dust have been sampled during wheat harvesting of summer 2010 at 100 sites uniformly distributed in the Vaud region that are representative of the different agriculture practices. Personal exposure has been evaluated for different wheat related activities: harvesting, grain unload, baling straw, the cleaning of harvesters and silos. Aerosols have been sampled at a rate of 2L/min between 15 min to 4 hours (t) on a 5m PVC filter for estimating the total dust inhaled, on gelatine filter for the identification and quantification of molds, and on a 0.45um polycarbonate filter for endotoxin quantification. Altitude, temperature and annual average rainfall were considered for each site. The physical and chemical characteristics of soils were determined using the methods in effect at Sol Council (Nyon). Total dust has been quantified following NIOSH 0500 method. Reactive endotoxine activity has been determined with Limulus Amebocyte Lysate Assay. All molds have been identified by the pyrosequencing of ITS2 amplicons generated from bioaerosol or wheat dust genomic DNA. Results & Conclusions. Our results confirm the previous quantitative data on the worker exposure to wheat dust. In addition, they show that crop workers are systematically exposed to complex mixtures of allergens, irritants or cytotoxic components. The novelty of our study is the systematic detection of molds such as Fusarium - that is a mycotoxins producer - in the bioaerosols. The results are interpreted by taking in account the agriculture practice, the Phosphorus : Carbon : Nitrogen ratio of the soil, the altitude and the average of rainy days per year.

Risques microbiologiques dans les espaces fermés : exemple d'un centre de compostage et de cultures en serres

La manipulation de végétaux ou de débris végétaux dans des espaces fermés (hangar pour le compostage, serres pour les cultures) est fréquemment effectuée en France. Néanmoins, le niveau d'exposition des travailleurs des différentes filières concernées aux bioaérosols dégagés par ces substrats, est peu connu. Dans cette note, deux études ont été choisies pour illustrer l'ampleur de ce type d'exposition dans des espaces fermés. La première publication concerne un centre de compostage et la deuxième publication cible des serres de culture de la tomate et du concombre. L'extrapolation des résultats obtenus à partir de prélèvements d'ambiance à l'exposition professionnelle des travailleurs est tout particulièrement discutée.

Talking to kids about prescription drug abuse, 2010

As a parent you’re concerned about your children’s health and well-being. You teach them about crossing the street safely and about personal safety. You talk with them about the risks of using tobacco, alcohol and other illegal drugs. But did you know that one of the fastest growing threats to youth today is the abuse of prescription and over-the-counter (OTC) drugs? Did you know that nearly one in five teens (19 percent or 4.5 million) nationally report intentionally abusing prescription drugs to get high, and one in ten reports abusing cough medicine to get high.

Occupational asthma in workers exposed to Mesalazine powder inhalation

Background: Due to complains of respiratory symptoms of some employees a pharmaceutical company asked in 2008 the occupational medical department of the Institute for Work and Health in Lausanne to evaluate the health status of their workers exposed to Mesalazine powder, which is the active agent of a drug used for the treatment of bowels inflammation. Therefore we examined the 21 workers exposed to Mesalazine powder. Method: After a visit of the pharmaceutical company in order to investigate the Mesalazine powder production, we performed an individual medical evaluation of the 21 workers. Our medical protocol was based on the safety data sheet of Mesalazine, the data found in the scientific literature and the «Compendium Suisse des Médicaments» and covered upper and lower respiratory tract as well as skin and eyes. Results: Sixty two percent (62%) of the exposed employees had symptoms of skin, eyes and throat irritation. Three employees reported respiratory symptoms such as dyspnoea, cough and expiratory wheezing, which appeared during the working hours. The Peak Flow series performed at the workplace was lowered in the three employees with lower respiratory tract symptoms. None of the three had consulted a physician, even though the symptoms had been present since some months. The pneumological evaluation confirmed for all three cases the asthma diagnoses. Conclusion: It is known that patients who are treated with drugs including Mesalazine can develop adverse health effect such as asthma. However occupational asthma in workers exposed to Mesalazine powder inhalation is until now not described in the literature. Immunologic investigations in order to know if the occupational asthma caused by Mesalazine is of allergic or mechanical irritation nature are still ongoing. Concerning the three workers with asthma, inability to work with Mesalazine was pronounced. Furthermore, the SUVA recognized the three patients with asthma as occupational respiratory diseases. Following our results and recommendations, the company undertook some measures to reduce the exposure to Mesalazine. A new health evaluation of the employees in the Mesalazine production is hence planned in 2009. As each year new causes of occupational asthma are described, the possible work relation of new asthma onset has to be carefully investigated as the consequences for the patient e.g. removal from exposure and for the exposed co-workers are of substantial importance.

Assessment of airborne virus contamination in wastewater treatment plants

INTRODUCTION: Occupational exposure to bioaerosols in wastewater treatment plants (WWTP) and its consequence on workers׳ health are well documented. Most studies were devoted to enumerating and identifying cultivable bacteria and fungi, as well as measuring concentrations of airborne endotoxins, as these are the main health-related factors found in WWTP. Surprisingly, very few studies have investigated the presence and concentrations of airborne virus in WWTP. However, many enteric viruses are present in wastewater and, due to their small size, they should become aerosolized. Two in particular, the norovirus and the adenovirus, are extremely widespread and are the major causes of infectious gastrointestinal diseases reported around the world. The third one, hepatitis E virus, has an emerging status. GOAL AND METHODS: This study׳s objectives were to detect and quantify the presence and concentrations of 3 different viruses (adenovirus, norovirus and the hepatitis E virus) in air samples from 31 WWTPs by using quantitative polymerase chain reaction (qPCR) during two different seasons and two consecutive years. RESULTS: Adenovirus was present in 100% of summer WWTP samples and 97% of winter samples. The highest airborne concentration measured was 2.27×10(6) genome equivalent/m(3) and, on average, these were higher in summer than in winter. Norovirus was detected in only 3 of the 123 air samples, and the hepatitis E virus was not detected. CONCLUSIONS: Concentrations of potentially pathogenic viral particles in WWTP air are non-negligible and could partly explain the work-related gastrointestinal symptoms often reported in employees in this sector.

Characterizing emission and breathing-zone concentrations following exposure cases to fluororesin-based waterproofing spray mists.

Measurements and simulations were performed to assess workers' exposure to solvent vapors and aerosols during the waterproofing of a tiled surface. This investigation followed two recent incidents in the same company where workers experienced acute respiratory illness after spraying a stain-repellent resin containing fluorinated polymers on stone-tiled walls and floors. Because the waterproofing activity had been done for years at the tile company without encountering any exposure problems prior to these cases, it was strongly suspected that the incidents were linked to a recent change in the composition of the coating mixture. Experimental measurements and simulations indicated that the emission rate of particles smaller than 10 microm may be estimated at 0.66 mg/sec (SD 0.10) for the old resin and at 0.37 mg/sec (SD 0.04) for the new one. The measurement of the solvent emission rate from surfaces coated with the two resins indicated that shortly after spraying, the emission was in the range of 18 to 20 mg/sec x m2 and was similar for both products. Solvent and overspray emission rates were introduced in a two-zone compartment model. The results obtained in the near-field indicate significant exposure to overspray mist (7 and 34 mg/m3 for new resin) and solvent vapors (80 to 350 ppm for the new resin). It was also shown that the introduction of the new resin tended to significantly decrease the levels of solvents and particulates in the workers' breathing zone. These results strongly suggest that cases of acute respiratory illness are related to the specific toxicity of the fluorinated polymer itself. The fact that the same polymer is used in various commercial products raises concern regarding other possible occupational and domestic exposures.

Anthropogenic radionuclides in atmospheric air over Switzerland during the last few decades.

The atmospheric nuclear testing in the 1950s and early 1960s and the burn-up of the SNAP-9A satellite led to large injections of radionuclides into the stratosphere. It is generally accepted that current levels of plutonium and caesium radionuclides in the stratosphere are negligible. Here we show that those radionuclides are present in the stratosphere at higher levels than in the troposphere. The lower content in the troposphere reveals that dry and wet deposition efficiently removes radionuclides within a period of a few weeks to months. Since the stratosphere is thermally stratified and separated from the troposphere by the tropopause, radioactive aerosols remain longer. We estimate a mean residence time for plutonium and caesium radionuclides in the stratosphere of 2.5-5 years. Our results also reveal that strong volcanic eruptions like Eyjafjallajökull in 2010 have an important role in redistributing anthropogenic radionuclides from the stratosphere to the troposphere.

Goodpasture's disease presenting with acute renal failure

A 15-year-old boy was admitted for vomiting, diarrhea, fatigue, crampy abdominal pain and oliguria. A renal failure was diagnosed (creatinine 2523 μmol/, urea 53,1 mmol/l) with severe aregenerative anemia (80 g/l), metabolic acidosis, hyperkalemia, elevated inflammatory markers and normal platelet count. A nephrotic proteinuria was noticed (350 g/mol). Patient's creatinine was normal 4 months before. The diagnosis of rapidly progressive glomerulonephritis was suspected. C3 and C4 were normal, ANA and ANCA were negative; anti-glomerular basement membrane antibody (anti-GBM) was positive (1/320) which lead to the diagnosis of Goodpasture's disease. Chest X-ray showed bilateral hilar infiltration and CT-scan revealed multiple alveolar haemorrhages, confirmed by broncho-alveolar lavage. Renal ultrasound showed swollen and hyperechogenous kidneys with loss of corticomedullary differentiation. Renal biopsy revealed a global extracapillary necrotising glomerulonephritis, with IgG lining the membrane at immunofluorescence. The patient was treated with continuous venovenous hemodia- filtration, plasmapheresis and immunosuppressive therapy (cyclophosphamid and corticoids) which lead to normalisation of anti-GBM level and favourable respiratory evolution with no sequelae. The renal evolution was unfavourable and the patient developed end stage renal disease and was treated with haemodialysis. Goodpasture's disease is an autoimmune process in which anti-GBM are produced against collagen IV present in the kidneys and pulmonary alveolae, resulting in acute or rapidly progressive glomerulonephritis and altering the pulmonary alveolae. It is a rare disease concerning mostly infants and young adults. Clinical presentation consists in an acute renal failure with proteinuria. Pulmonary symptoms (60-70% of the total cases) are dyspnea, cough, and haemoptysis. Diagnosis is made with the dosage of immunological anti-GBM and with renal biopsy. Factors of poor prognosis are initial oliguria, alteration of >50% of the glomerulus, very high creatinine or need of dialysis. Anti-GBM dosage is used for follow up. Patients are treated with immunosuppressive therapy for 6 to 9 months and plasmapheresis. Few recurrences are seen. Goodpasture's disease should be evoqued whenever a young patient is seen with glomerulonephritis, especially if pulmonary abnormalities are present. The disease requires an aggressive treatment in order to prevent respiratory and kidney failure.

Does this child have a foreign body aspiration?

Context: Foreign body aspiration (FbA) is a serious problem in children. Accurate clinical and radiographic diagnosis is important because missed or delayed diagnosis can result in respiratory difficulties ranging from life-treatening airway obstruction to chronic wheezing or recurrent pneumonia. Bronchoscopy also has risks and accurate clinical and radiographc diagnosis can support the decision of bronchoscopy. Objective: To rewiev the diagnostic accuracy of clinical presentation (CP) and pulmonary radiograph (PR) for the diagnosis of FbA. There is no previous rewievMethods: A search of Medline is conducted for articles containing data regarding CP and PR signes of FbA. Calculation of likelihood ratios (LR) and pre and post test probability using Bayes theorem were performed for all signs of CP and PR. Inclusion criteria: Articles containing prospective data regarding CP and PR of FbA. Exclusion criteria: Retrospectives studies. Articles containing incomplete data for calculation of LR. Results: Five prospectives studies are included with a total of 585 patients. Prevalence of FbA is 63% in children suspected of FbA. If CP is normal, probability of FbA is 25% and if PR is normal, probability is 14%. If CP is pathologic, probability of FbA is 69-76% with presence of cough (LR = 1.32) or dyspnea (LR = 1.84) or localized crackles (LR = 1.5). Probability is 81-88% if cyanosis (LR = 4.8) or decreased breaths sounds (LR = 4.3) or asymetric auscultation (LR = 2.9) or localized wheezing (LR = 2.5) are present. When CP is anormal and PR show mediatinal shift (LR = 100), pneumomediatin (LR = 100), radio opaque foreign body (LR = 100), lobar distention (LR = 4), atelectasis (LR = 2.5), inspiratory/expiratory abnormal (LR = 7), the probability of FbA is 96-100%. If CP is normal and PR is abnormal the probability is 40-100%. If CP is abnormal and PR is normal the probability is 55-75%. Conclusions: This rewiev of prospective studies demonstrates the importance of CP and PR and an algorithm can be proposed. When CP is abnormal with or without PR pathologic, the probability of FbA is high and bronchoscopy is indicated. When CP and PR are normal the probability of FbA is low and bronchoscopy is not necessary immediatly, observation should be proposed. This approach should be validated with prospective study.

Characterization of surface functional groups present on laboratory-generated and ambient aerosol particles by means of heterogeneous titration reactions

A Knudsen flow reactor has been used to quantify surface functional groups on aerosols collected in the field. This technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. In the first part of this work, the reactivity of different probe gases on laboratory-generated aerosols (limonene SOA, Pb(NO3)2, Cd(NO3)2) and diesel reference soot (SRM 2975) has been studied. Five probe gases have been selected for the quantitative determination of important functional groups: N(CH3)3 (for the titration of acidic sites), NH2OH (for carbonyl functions), CF3COOH and HCl (for basic sites of different strength), and O3 (for oxidizable groups). The second part describes a field campaign that has been undertaken in several bus depots in Switzerland, where ambient fine and ultrafine particles were collected on suitable filters and quantitatively investigated using the Knudsen flow reactor. Results point to important differences in the surface reactivity of ambient particles, depending on the sampling site and season. The particle surface appears to be multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also indicate that the surface of ambient particles was characterized by a high density of carbonyl functions (reactivity towards NH2OH probe in the range 0.26-6 formal molecular monolayers) and a low density of acidic sites (reactivity towards N(CH3)3 probe in the range 0.01-0.20 formal molecular monolayer). Kinetic parameters point to fast redox reactions (uptake coefficient ?0>10-3 for O3 probe) and slow acid-base reactions (?0<10-4 for N(CH3)3 probe) on the particle surface. [Authors]

Effects of bioaerosol exposure on work-related symptoms among Swiss sawmill workers

Objective Exposure to bioaerosols in the occupational environment of sawmills could be associated with a wide range of health effects, in particular respiratory impairment, allergy and organic dust toxic syndrome. The objective of the study was to assess the frequency of medical respiratory and general symptoms and their relation to bioaerosol exposure. Method Twelve sawmills in the French part of Switzerland were investigated and the relationship between levels of bioaerosols (wood dust, airborne bacteria, airborne fungi and endotoxins), medical symptoms and impaired lung function was explored. A health questionnaire was distributed to 111 sawmill workers. Results The concentration of airborne fungi exceeded the limit recommended by the Swiss National Insurance (SUVA) in the twelve sawmills. This elevated fungi level significantly influenced the occurrence of bronchial syndrome (defined by cough and expectorations). No other health effects (irritations or respiratory effects) could be associated to the measured exposures. We observed that junior workers showed significantly more irritation syndrome (defined by itching/running nose, snoring and itching/red eyes) than senior workers. Lung function tests were not influenced by bioaerosol levels nor dust exposure levels. Conclusion Results suggest that occupational exposure to wood dust in a Swiss sawmill does not promote a clinically relevant decline in lung function. However, the occurrence of bronchial syndrome is strongly influenced by airborne fungi levels. [Authors]

The use of heterogeneous chemistry for the characterization of functional groups at the gas/particle interface of soot and TiO(2) nanoparticles

Six gases (N((CH3)3), NH2OH, CF3COOH, HCl, NO2, O3) were selected to probe the surface of seven combustion aerosol (amorphous carbon, flame soot) and three types of TiO2 nanoparticles using heterogeneous, that is gas-surface reactions. The gas uptake to saturation of the probes was measured under molecular flow conditions in a Knudsen flow reactor and expressed as a density of surface functional groups on a particular aerosol, namely acidic (carboxylic) and basic (conjugated oxides such as pyrones, N-heterocycles) sites, carbonyl (R1-C(O)-R2) and oxidizable (olefinic, -OH) groups. The limit of detection was generally well below 1% of a formal monolayer of adsorbed probe gas. With few exceptions most investigated aerosol samples interacted with all probe gases which points to the coexistence of different functional groups on the same aerosol surface such as acidic and basic groups. Generally, the carbonaceous particles displayed significant differences in surface group density: Printex 60 amorphous carbon had the lowest density of surface functional groups throughout, whereas Diesel soot recovered from a Diesel particulate filter had the largest. The presence of basic oxides on carbonaceous aerosol particles was inferred from the ratio of uptakes of CF3COOH and HCl owing to the larger stability of the acetate compared to the chloride counterion in the resulting pyrylium salt. Both soots generated from a rich and a lean hexane diffusion flame had a large density of oxidizable groups similar to amorphous carbon FS 101. TiO2 15 had the lowest density of functional groups among the three studied TiO2 nanoparticles for all probe gases despite the smallest size of its primary particles. The used technique enabled the measurement of the uptake probability of the probe gases on the various supported aerosol samples. The initial uptake probability, g0, of the probe gas onto the supported nanoparticles differed significantly among the various investigated aerosol samples but was roughly correlated with the density of surface groups, as expected. [Authors]