Advanced Applications of 3D Dosimetry and 3D Printing in Radiation Therapy

As complex radiotherapy techniques become more readily-practiced, comprehensive 3D dosimetry is a growing necessity for advanced quality assurance. However, clinical implementation has been impeded by a wide variety of factors, including the expense of dedicated optical dosimeter readout tools, high operational costs, and the overall difficulty of use. To address these issues, a novel dry-tank optical CT scanner was designed for PRESAGE 3D dosimeter readout, relying on 3D printed components and omitting costly parts from preceding optical scanners. This work details the design, prototyping, and basic commissioning of the Duke Integrated-lens Optical Scanner (DIOS).

The convex scanning geometry was designed in ScanSim, an in-house Monte Carlo optical ray-tracing simulation. ScanSim parameters were used to build a 3D rendering of a convex ‘solid tank’ for optical-CT, which is capable of collimating a point light source into telecentric geometry without significant quantities of refractive-index matched fluid. The model was 3D printed, processed, and converted into a negative mold via rubber casting to produce a transparent polyurethane scanning tank. The DIOS was assembled with the solid tank, a 3W red LED light source, a computer-controlled rotation stage, and a 12-bit CCD camera. Initial optical phantom studies show negligible spatial inaccuracies in 2D projection images and 3D tomographic reconstructions. A PRESAGE 3D dose measurement for a 4-field box treatment plan from Eclipse shows 95% of voxels passing gamma analysis at 3%/3mm criteria. Gamma analysis between tomographic images of the same dosimeter in the DIOS and DLOS systems show 93.1% agreement at 5%/1mm criteria. From this initial study, the DIOS has demonstrated promise as an economically-viable optical-CT scanner. However, further improvements will be necessary to fully develop this system into an accurate and reliable tool for advanced QA.

Pre-clinical animal studies are used as a conventional means of translational research, as a midpoint between in-vitro cell studies and clinical implementation. However, modern small animal radiotherapy platforms are primitive in comparison with conventional linear accelerators. This work also investigates a series of 3D printed tools to expand the treatment capabilities of the X-RAD 225Cx orthovoltage irradiator, and applies them to a feasibility study of hippocampal avoidance in rodent whole-brain radiotherapy.

As an alternative material to lead, a novel 3D-printable tungsten-composite ABS plastic, GMASS, was tested to create precisely-shaped blocks. Film studies show virtually all primary radiation at 225 kVp can be attenuated by GMASS blocks of 0.5cm thickness. A state-of-the-art software, BlockGen, was used to create custom hippocampus-shaped blocks from medical image data, for any possible axial treatment field arrangement. A custom 3D printed bite block was developed to immobilize and position a supine rat for optimal hippocampal conformity. An immobilized rat CT with digitally-inserted blocks was imported into the SmART-Plan Monte-Carlo simulation software to determine the optimal beam arrangement. Protocols with 4 and 7 equally-spaced fields were considered as viable treatment options, featuring improved hippocampal conformity and whole-brain coverage when compared to prior lateral-opposed protocols. Custom rodent-morphic PRESAGE dosimeters were developed to accurately reflect these treatment scenarios, and a 3D dosimetry study was performed to confirm the SmART-Plan simulations. Measured doses indicate significant hippocampal sparing and moderate whole-brain coverage.

Beam Angle Optimization for Automated Coplanar IMRT Lung Plans

Purpose: To investigate the effect of incorporating a beam spreading parameter in a beam angle optimization algorithm and to evaluate its efficacy for creating coplanar IMRT lung plans in conjunction with machine learning generated dose objectives.

Methods: Fifteen anonymized patient cases were each re-planned with ten values over the range of the beam spreading parameter, k, and analyzed with a Wilcoxon signed-rank test to determine whether any particular value resulted in significant improvement over the initially treated plan created by a trained dosimetrist. Dose constraints were generated by a machine learning algorithm and kept constant for each case across all k values. Parameters investigated for potential improvement included mean lung dose, V20 lung, V40 heart, 80% conformity index, and 90% conformity index.

Results: With a confidence level of 5%, treatment plans created with this method resulted in significantly better conformity indices. Dose coverage to the PTV was improved by an average of 12% over the initial plans. At the same time, these treatment plans showed no significant difference in mean lung dose, V20 lung, or V40 heart when compared to the initial plans; however, it should be noted that these results could be influenced by the small sample size of patient cases.

Conclusions: The beam angle optimization algorithm, with the inclusion of the beam spreading parameter k, increases the dose conformity of the automatically generated treatment plans over that of the initial plans without adversely affecting the dose to organs at risk. This parameter can be varied according to physician preference in order to control the tradeoff between dose conformity and OAR sparing without compromising the integrity of the plan.

Les pratiques culturelles des excisions et des infibulations à Bamako au Mali : la contribution de la dignité humaine au respect de l’intégrité physique des femmes

Une des questions les plus débattues dans le domaine de l’éthique en ce XXIème siècle entre l’Afrique et le monde occidental concerne le respect de l’intégrité physique des femmes. Parmi les actions humaines qui touchent le plus l’intégrité corporelle, les excisions et les infibulations sont les plus dénoncées en Afrique. Longtemps considérées comme des rites d’initiation pubertaire des filles, ces pratiques sont maintenant considérées comme néfastes à la santé, et communément désignées par la communauté internationale de « mutilations sexuelles féminines ». Au cours des dernières décennies, ces pratiques ont été progressivement interdites légalement tant dans la plupart des pays d’Afrique que dans les pays occidentaux. Le Comité Inter-Africain (CIAF) contre les mutilations sexuelles demande la « tolérance zéro » par rapport à ces pratiques. La communauté internationale les combat avec des armes juridiques, en se référant aux conséquences médicales et aux droits de l’homme. Notre thèse est née d’une interrogation sur les raisons pour lesquelles ces rites se poursuivent encore en Afrique et plus spécialement au Mali, alors que dans les pays occidentaux, on élève fortement la voix pour les dénoncer comme sévices infligés aux femmes. Sur le plan international, on hésite à imposer des valeurs universelles à un phénomène perçu dans une large mesure comme une tradition conforme aux normes sociales des communautés qui les maintiennent. Afin de mieux cerner le sujet, notre questionnement a été le suivant : « Comment les pratiques culturelles des excisions et des infibulations, dans la ville de Bamako au Mali, interpellent-elles l’éthique : en quoi l’analyse de ces rites constitue-t-elle un domaine légitime d’application des principes de la bioéthique ? » Notre réflexion part du postulat que la dignité humaine est une norme à l’aune de laquelle se mesurent les défis éthiques liés à ces rites. Un proverbe Bambara dit ceci : « Une seule main ne lave pas proprement un éléphant ». La logique de cette sagesse met en évidence qu’une seule approche disciplinaire ne saurait faire ressortir les enjeux éthiques de ces pratiques. Notre analyse bioéthique se veut une démarche interdisciplinaire, qui permet d’articuler les approches philosophiques, anthropologiques, sociologiques et biomédicales de ces pratiques. Le premier chapitre, à travers la revue des écrits, présente la problématique de ces rites. Le deuxième chapitre présente le cadre théorique basé sur la notion de dignité humaine et délimite « ses contours, ses sources, ses formes et ses conséquences » afin de la rendre plus efficace et opérationnelle comme moyen de protection de l’être humain. Le troisième chapitre présente la méthodologie de la recherche basée sur la méthode qualitative et l’induction analytique et décrit le contexte de l’étude. Le quatrième chapitre présente les résultats de la recherche qui font ressortir que ces pratiques se résument essentiellement au contrôle du désir sexuel féminin. Ces pratiques sont par ailleurs déritualisées, touchent de plus en plus des enfants, comportent des risques et des conséquences sur la santé avec des coûts humains et financiers pour la société. Le cinquième chapitre analyse ces pratiques avec les principes éthiques qui démontrent qu’elles constituent un problème de santé publique malgré leur caractère culturel. Enfin, le sixième chapitre présente la portée et la limite de la thèse. Celle-ci montre qu’il est possible de mener un débat sur les excisions et les infibulations à travers une éthique de discussion. Elle offre un moyen pour y parvenir avec une vision de la notion de dignité humaine comme une « valeur éthique universelle » susceptible d’être utilisée dans toutes les actions impliquant l’être humain et dans tous les contextes socio-culturels. Notre démarche élargit ainsi le champ d’application des principes bioéthiques à des pratiques non-médicales. Par cette thèse, nous souhaitons contribuer à enrichir la réflexion éthique sur les excisions et les infibulations et inspirer les politiques de santé publique dans le respect des diversités culturelles. Nous espérons pouvoir inspirer aussi d’autres recherches en vue de rapprocher la bioéthique des pratiques culturelles traditionnelles afin de trouver des compromis raisonnables qui pourraient renforcer le rôle de protection de la dignité humaine.

Troubled Waters Ahead: An Evaluation of Shoreline Land Use Policies for Water Quality Protection in Renfrew County, Ontario

Increases in the rate and extent of lakeshore development along inland lakes in Ontario are adversely impacting water quality. Despite growing awareness, there is a lack of knowledge about the land use policies and tools in place to protect inland lakes in rural Ontario. This research evaluated official plans for water quality protection policies for inland lakes in the County of Renfrew, Ontario to address this gap. The findings suggest that municipalities implicitly link water quality to land use planning policy and fail to incorporate innovative methods to protect water quality.

Adsorption Calorimetry for Energy Conversion Technologies: Applications in Organic Photovoltaics, Catalysis, and Atomic Layer Deposition

Thesis (Ph.D.)--University of Washington, 2016-07

Expanding a Global Company Management System to An Integrated Coverage of Several Standards

This Master’s thesis examines the implementation of management system standard requirements as integrated in the organization. The aim is to determine how requirements from management system standards ISO 14001:2015 and ISO 9001:2015 can be integrated and implemented into the existing ISO 9001:2008 compliant management system. Research was executed as action research by utilizing an operating model about the integrated use of management system standards created by the International Organization for Standardization. Phases of the operating model were applied to the target organization. The similarity and integration potential of relevant standards were assessed by using comparative matrices. Allocation of the requirements and conformity assessment of the processes was executed by gap analysis. The main results indicate that the requirements of the relevant standards are principally equivalent or have the same kind of purpose. The results also show the most important processes of the target organization in terms of requirement compliance, as well as the requirements which affect the process the most. Prioritizing the compliance achievement of the most important processes and implementation of those requirements that have the most effect create an opportunity for organizations to implement the integrated requirements effectively.

Automatisation de la fonction de façonnage de deux têtes d’abatteuses-façonneuses : Effets sur la productivité et le taux de conformité des billes façonnées

Pour rester compétitives, les entreprises forestières cherchent à contrôler leurs coûts d’approvisionnement. Les abatteuses-façonneuses sont pourvues d’ordinateurs embarqués qui permettent le contrôle et l’automatisation de certaines fonctions. Or, ces technologies ne sont pas couramment utilisées et sont dans le meilleur des cas sous-utilisées. Tandis que l’industrie manifeste un intérêt grandissant pour l’utilisation de ces ordinateurs, peu de travaux de recherche ont porté sur l’apport en productivité et en conformité aux spécifications de façonnage découlant de l’usage de ces systèmes. L’objectif de l’étude était de mesurer les impacts des trois degrés d’automatisation (manuel, semi-automatique et automatique) sur la productivité (m3/hmp) et le taux de conformité des longueurs et des diamètre d’écimage des billes façonnées (%). La collecte de données s’est déroulée dans les secteurs de récolte de Produits forestiers résolu au nord du Lac St-Jean entre les mois de janvier et d’août 2015. Un dispositif en blocs complets a été mis en place pour chacun des cinq opérateurs ayant participé à l’étude. Un seuil de 5 % a été employé pour la réalisation de l’analyse des variances, après la réalisation de contrastes. Un seul cas a présenté un écart significatif de productivité attribuable au changement du degré d’automatisation employé, tandis qu’aucune différence significative n’a été détectée pour la conformité des diamètres d’écimage; des tendances ont toutefois été constatées. Les conformités de longueur obtenues par deux opérateurs ont présenté des écarts significatifs. Ceux-ci opérant sur deux équipements distincts, cela laisse entrevoir l’impact que peut aussi avoir l’opérateur sur le taux de conformité des longueurs.

Remolding a company through a compliance program : the case of Siemens

Abstract : Since at least the 1980's, a growing number of companies have set up an ethics or a compliance program within their organization. However, in the field of study of business management, there is a paucity of research studies concerning these management systems. This observation warranted the present investigation of one company's compliance program. Compliance programs are set up so that individuals working within an organization observe the laws and regulations which pertain to their work. This study used a constructivist grounded theory methodology to examine the process by which a specific compliance program, that of Siemens Canada Limited, was implemented throughout its organization. In conformity with this methodology, instead of proceeding with the investigation in accordance to a particular theoretical framework, the study established a number of theoretical constructs used strictly as reference points. The study's research question was stated as: what are the characteristics of the process by which Siemens' compliance program integrated itself into the existing organizational structure and gained employee acceptance? Data consisted of documents produced by the company and of interviews done with twenty-four managers working for Siemens Canada Limited. The researcher used QSR-Nvivo computer assisted software to code transcripts and to help with analyzing interviews and documents. Triangulation was done by using a number of analysis techniques and by constantly comparing findings with extant theory. A descriptive model of the implementation process grounded in the experience of participants and in the contents of the documents emerged from the data. The process was called "Remolding"; remolding being the core category having emerged. This main process consisted of two sub-processes identified as "embedding" and "appraising." The investigation was able to provide a detailed account of the appraising process. It identified that employees appraised the compliance program according to three facets: the impact of the program on the employee's daily activities, the relationship employees have with the local compliance organization, and the relationship employees have with the corporate ethics identity. The study suggests that a company who is entertaining the idea of implementing a compliance program should consider all three facets. In particular, it suggests that any company interested in designing and implementing a compliance program should pay particular attention to its corporate ethics identity. This is because employee's acceptance of the program is influenced by their comparison of the company's ethics identity to their local ethics identity. Implications of the study suggest that personnel responsible for the development and organizational support of a compliance program should understand the appraisal process by which employees build their relationship with the program. The originality of this study is that it points emphatically that companies must pay special attention in developing a corporate ethics identify which is coherent, well documented and well explained.

Simplified design method for energy dissipating devices in retrofitting of seismically isolated bridges

Abstract: Highway bridges have great values in a country because in case of any natural disaster they may serve as lines to save people’s lives. Being vulnerable under significant seismic loads, different methods can be considered to design resistant highway bridges and rehabilitate the existing ones. In this study, base isolation has been considered as one efficient method in this regards which in some cases reduces significantly the seismic load effects on the structure. By reducing the ductility demand on the structure without a notable increase of strength, the structure is designed to remain elastic under seismic loads. The problem associated with the isolated bridges, especially with elastomeric bearings, can be their excessive displacements under service and seismic loads. This can defy the purpose of using elastomeric bearings for small to medium span typical bridges where expansion joints and clearances may result in significant increase of initial and maintenance cost. Thus, supplementing the structure with dampers with some stiffness can serve as a solution which in turn, however, may increase the structure base shear. The main objective of this thesis is to provide a simplified method for the evaluation of optimal parameters for dampers in isolated bridges. Firstly, performing a parametric study, some directions are given for the use of simple isolation devices such as elastomeric bearings to rehabilitate existing bridges with high importance. Parameters like geometry of the bridge, code provisions and the type of soil on which the structure is constructed have been introduced to a typical two span bridge. It is concluded that the stiffness of the substructure, soil type and special provisions in the code can determine the employment of base isolation for retrofitting of bridges. Secondly, based on the elastic response coefficient of isolated bridges, a simplified design method of dampers for seismically isolated regular highway bridges has been presented in this study. By setting objectives for reduction of displacement and base shear variation, the required stiffness and damping of a hysteretic damper can be determined. By modelling a typical two span bridge, numerical analyses have followed to verify the effectiveness of the method. The method has been used to identify equivalent linear parameters and subsequently, nonlinear parameters of hysteretic damper for various designated scenarios of displacement and base shear requirements. Comparison of the results of the nonlinear numerical model without damper and with damper has shown that the method is sufficiently accurate. Finally, an innovative and simple hysteretic steel damper was designed. Five specimens were fabricated from two steel grades and were tested accompanying a real scale elastomeric isolator in the structural laboratory of the Université de Sherbrooke. The test procedure was to characterize the specimens by cyclic displacement controlled tests and subsequently to test them by real-time dynamic substructuring (RTDS) method. The test results were then used to establish a numerical model of the system which went through nonlinear time history analyses under several earthquakes. The outcome of the experimental and numerical showed an acceptable conformity with the simplified method.

Auditoria e identificação de propostas de melhoria no SGA da Funfrap

O compromisso das organizações com as obrigações decretadas ao nível do ambiente, segurança e qualidade emancipa a implementação de Sistemas de Gestão e o processo de auditar. Neste trabalho, decorrente do estágio curricular no âmbito do Mestrado em Engenharia do Ambiente, está evidenciada a importância dos Sistemas de Gestão Ambiental e as razões preponderantes para que sejam auditados. O trabalho pretendeu auditar e avaliar a conformidade do sistema de gestão ambiental, de acordo com a NP EN ISO 14001:2004, de uma indústria de fundição de metais, Funfrap -. Fundição Portuguesa SA, a fim de identificar oportunidades de melhoria no desempenho ambiental da organização. No âmbito do estágio foram ainda realizadas outras atividades, incluindo campanhas de sensibilização, inventário de resíduos sólidos, ferramentas da metodologia World Class Manufacturing, formação sobre a separação de resíduos nos postos de trabalho, acompanhamento de um ensaio na estação de tratamento de águas residuais industriais e apoio para o desenvolvimento do relatório ambiental anual. Da auditoria interna identificaram-se e corrigiram-se nove não conformidades menores e cinco observações. Da auditoria externa foram identificadas apenas duas não conformidades, nenhuma delas relacionadas com as detetadas anteriormente. Além deste resultado foram sugeridas algumas medidas para alcançar um melhor desempenho ambiental da organização.

Influence of the perception of discrimination on women's work motivation

Nowadays, despite anti-discrimination policies, women suffer frequently from a lack of consideration from their male colleagues, altering their well-being and motivation to work. More precisely, perceived personal or groupal discrimination, could have a distinct influence on work motivation. Previous studies showed that the impact on women varies in function of the type of perceived discrimination (Bourguignon et al. 2006). Based on the self-categorization and the social identity theory, work motivation is differently structured as if employees categorized themselves as individuals or as part of a group. As a result, a different impact from personal and group discrimination on work motivation is expected. Moreover, it has been proved that typical men behavior is heavily associated with competence compared to women behavior (Marchand, Saint-Charles & Corbeil, 2007). Therefore, it is hypothesized that women with more masculine traits will suffer from less perceived discrimination, and work motivation. An online survey was created in order to collect data over work motivation, perceived personal and group discrimination. The respondents were also questioned on typical men and women behavior to determine their gender-conformity. To test our hypotheses, data were collected from 57 women stemming from the labour force, aged from 21 to 63 years old. Results indicate that perceived personal discrimination was negatively related to work motivation and that perceived group discrimination was negatively correlated with masculine behavior. Thereby, our study enhances the importance of work environment, and especially discrimination, on work motivation. This research also corroborates the self-categorization and the social identity theory framework to study these issues.

The Role of Feminine and Masculine Norms in College Women's Alcohol Use

Current literature suggests not only that men and women can conform to both feminine and masculine norms, but that women who adhere to certain masculine norms may be at greater risk for problematic alcohol use. This study examined conformity to both masculine and feminine norms, and how conformity to distinct norms influenced heavy episodic drinking and alcohol-related problems among a sample of underage college women (N= 645). Results demonstrated that the masculine norms risk-taking and emotional control were associated with increased HED, while the masculine norm power over women was associated with a decrease in HED. Traditional feminine norms, including modesty and sexual fidelity, were associated with a decrease in HED and alcohol-related problems. The feminine norm relational was associated with increased HED, while the norms thinness and appearance were associated with increased alcohol-related problems. The study’s theoretical and clinical implications are discussed.

Microbiological assessment of indoor air quality at different hospital sites

Poor hospital indoor air quality (IAQ) may lead to hospital-acquired infections, sick hospital syndrome and various occupational hazards. Air-control measures are crucial for reducing dissemination of airborne biological particles in hospitals. The objective of this study was to perform a survey of bioaerosol quality in different sites in a Portuguese Hospital, namely the operating theater (OT), the emergency service (ES) and the surgical ward (SW). Aerobic mesophilic bacterial counts (BCs) and fungal load (FL) were assessed by impaction directly onto tryptic soy agar and malt extract agar supplemented with antibiotic chloramphenicol (0.05%) plates, respectively using a MAS-100 air sampler. The ES revealed the highest airborne microbial concentrations (BC range 240-736 CFU/m(3) CFU/m(3); FL range 27-933 CFU/m(3)), exceeding, at several sampling sites, conformity criteria defined in national legislation [6]. Bacterial concentrations in the SW (BC range 99-495 CFU/m(3)) and the OT (BC range 12-170 CFU/m(3)) were under recommended criteria. While fungal levels were below 1 CFU/m(3) in the OT, in the SW (range 1-32 CFU/m(3)), there existed a site with fungal indoor concentrations higher than those detected outdoors. Airborne Gram-positive cocci were the most frequent phenotype (88%) detected from the measured bacterial population in all indoor environments. Staphylococcus (51%) and Micrococcus (37%) were dominant among the bacterial genera identified in the present study. Concerning indoor fungal characterization, the prevalent genera were Penicillium (41%) and Aspergillus (24%). Regular monitoring is essential for assessing air control efficiency and for detecting irregular introduction of airborne particles via clothing of visitors and medical staff or carriage by personal and medical materials. Furthermore, microbiological survey data should be used to clearly define specific air quality guidelines for controlled environments in hospital settings.

Women at Michigan : the "dangerous experiment," 1870s to the present /

Includes bibliographical references (p. 123-126) and index.

Construir frondoso :uma herança esquecida?

This dissertation of master degree was presented to Post-Graduation Program in Architecture and Planning at UFRN, Brazil. It evaluates 45 one-family housings in the Metropolitan Area of Recife, whose architects consider them to be in conformity with the recommendations contained in Armando de Holanda's book: A Guide to build in the Brazilian Northeast: Architecture as a pleasant place in the sunny tropics , published in 1976 by UFPE. For a long time, it used to be reference in many Architecture and Planning Schools of the Northern Region of Brazil. The research s methodological procedures are based on the Post- Occupancy Evaluation (P.O.E.) with emphasis on the users' thermal comfort of the houses that make part of the sample. Therefore, it has been done technical analyses of the projects, when possible; interviews with the architects; building s inspections; and form applications to the users. The collected data analysis was based on the project recommendations of Holanda s book, they can be synthesized in the principle of Building Leafy". It can not be affirmed that all the houses present the recommendations contained in the guide, but, in many different ways, they exist, sometimes more intensely and sometimes more shyly. However, it can be noticed that in the 45 projects, that the architects perceived the importance of "Building Leafy" on the climatic reality of the Metropolitan Region of Recife