Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

Downtime reduction analysis of the Australia Post flat mail optical character reader

Machine downtime, whether planned or unplanned, is intuitively costly to manufacturing organisations, but is often very difficult to quantify. The available literature showed that costing processes are rarely undertaken within manufacturing organisations. Where cost analyses have been undertaken, they generally have only valued a small proportion of the affected costs, leading to an overly conservative estimate. This thesis aimed to develop a cost of downtime model, with particular emphasis on the application of the model to Australia Post’s Flat Mail Optical Character Reader (FMOCR). The costing analysis determined a cost of downtime of $5,700,000 per annum, or an average cost of $138 per operational hour. The second section of this work focused on the use of the cost of downtime to objectively determine areas of opportunity for cost reduction on the FMOCR. This was the first time within Post that maintenance costs were considered along side of downtime for determining machine performance. Because of this, the results of the analysis revealed areas which have historically not been targeted for cost reduction. Further exploratory work was undertaken on the Flats Lift Module (FLM) and Auto Induction Station (AIS) Deceleration Belts through the comparison of the results against two additional FMOCR analysis programs. This research has demonstrated the development of a methodical and quantifiable cost of downtime for the FMOCR. This has been the first time that Post has endeavoured to examine the cost of downtime. It is also one of the very few methodologies for valuing downtime costs that has been proposed in literature. The work undertaken has also demonstrated how the cost of downtime can be incorporated into machine performance analysis with specific application to identifying high costs modules. The outcome of this report has both been the methodology for costing downtime, as well as a list of areas for cost reduction. In doing so, this thesis has outlined the two key deliverables presented at the outset of the research.

Assessment of Speech Dialog Systems using Multi-Modal Cognitive Load Analysis and Driving Performance Metrics

In this paper, cognitive load analysis via acoustic- and CAN-Bus-based driver performance metrics is employed to assess two different commercial speech dialog systems (SDS) during in-vehicle use. Several metrics are proposed to measure increases in stress, distraction and cognitive load and we compare these measures with statistical analysis of the speech recognition component of each SDS. It is found that care must be taken when designing an SDS as it may increase cognitive load which can be observed through increased speech response delay (SRD), changes in speech production due to negative emotion towards the SDS, and decreased driving performance on lateral control tasks. From this study, guidelines are presented for designing systems which are to be used in vehicular environments.

Incorporating interdependence in risk likelihood analysis to enhance diagnostics in condition monitoring

This research is aimed at addressing problems in the field of asset management relating to risk analysis and decision making based on data from a Supervisory Control and Data Acquisition (SCADA) system. It is apparent that determining risk likelihood in risk analysis is difficult, especially when historical information is unreliable. This relates to a problem in SCADA data analysis because of nested data. A further problem is in providing beneficial information from a SCADA system to a managerial level information system (e.g. Enterprise Resource Planning/ERP). A Hierarchical Model is developed to address the problems. The model is composed of three different Analyses: Hierarchical Analysis, Failure Mode and Effect Analysis, and Interdependence Analysis. The significant contributions from the model include: (a) a new risk analysis model, namely an Interdependence Risk Analysis Model which does not rely on the existence of historical information because it utilises Interdependence Relationships to determine the risk likelihood, (b) improvement of the SCADA data analysis problem by addressing the nested data problem through the Hierarchical Analysis, and (c) presentation of a framework to provide beneficial information from SCADA systems to ERP systems. The case study of a Water Treatment Plant is utilised for model validation.

Transaction Cost Analysis of PPP Risk Share

PPP (Public Private Partnerships) is a new operation mode of infrastructure projects, which usually undergo long periods and have various kinds of risks in technology, market, politics, policy, finance, society, natural conditions and cooperation. So the government and the private agency should establish the risk-sharing mechanism to ensure the successful implementation of the project. As an important branch of the new institutional economics, transaction cost economics and its analysis method have been proved to be beneficial to the proper allocation of risks between the two parts in PPP projects and the improvement of operation efficiency of PPP risk-sharing mechanism. This paper analyzed the transaction cost of the projects risk-sharing method and the both risk carriers. It pointed out that the risk-sharing method of PPP projects not only reflected the spirit of cooperation between public sector and private agency, but also minimized the total transaction cost of the risk sharing mechanism itself. Meanwhile, the risk takers had to strike a balance between the beforehand cost and the afterwards cost so as to control the cost of risk management. The paper finally suggested three ways which might be useful to reduce the transaction cost: to choose appropriate type of contract of PPP risk-sharing mechanism, to prevent information asymmetry and to establish mutual trust between the two participants.

Views of general practitioners and benzodiazepine users on benzodiazepines : a qualitative analysis

Effectively assisting benzodiazepine users to cease use requires a greater understanding of general practitioners’ (GPs)and benzodiazepine users’ views on using and ceasing benzodiazepines. This paper reports the findings from a qualitative study that examined the views of 28 GPs and 23 benzodiazepine users (BUs) in Cairns, Australia. A semistructured interview was conducted with all participants and the information gained was analysed using the Consensual Qualitative Research Approach, which allowed comparisons to be made between the views of the two groups of interviewees. There was commonality between GPs and BUs on reasons for commencing benzodiazepines, the role of dependence in continued use, and the importance of lifestyle change in its cessation. However, several differences emerged regarding commencement of use and processes of cessation. In particular, users felt there was greater need for GPs to routinely advise patients about non-pharmacological management of their problems and potential adverse consequences of long-term use before commencing benzodiazepines. Cessation could be discussed with all patients who use benzodiazepines for longer than 3 months, strategies offered to assist in management of withdrawal and anxiety, and referral to other health service providers for additional support. Lifestyle change could receive greater focus at all stages of treatment.

Who is publishing in the Journal of Sociology? an analysis of author trends 1965–2008

This paper presents the author characteristics of papers published in The Australian Sociological Association (TASA) journal, the Journal of Sociology (formerly the Australian and New Zealand Journal of Sociology) between 1965 and 2008. The aim of the paper is empirically to identify trends in authorship. The review examines all articles published in the period (excluding book reviews). The rationale of the study is to reveal trends in who publishes in the journal in terms of authors’ academic rank, gender, institution, and country. A table of those who have published the greatest number of papers is also presented. Findings show that over time the gap between the proportion of males and females publishing has closed; more PhD students and research fellows are publishing in the journal in recent decades; the highest proportion of authors consistently come from the Australian National University and The University of Queensland; and most authors are located in Australia. Information such as this can inform editorial practices and serve to inform the membership and readership on the nature of the journal.

Multidisciplinary students on Property core units : comparative analysis of introductory and advanced units

The composition of many professional services firms in the Urban Development area has moved away from a discipline specific ‘silo’ structure to a more multidisciplinary environment. The benefits of multidisciplinarity have been seen in industry by providing synergies across many of the related disciplines. Similarly, the Queensland University of Technology, Bachelor of Urban Development degree has sought to broaden the knowledge base of students and achieve a greater level of synergy between related urban development disciplines through the introduction of generic and multidisciplinary units. This study aims to evaluate the effectiveness of delivering core property units in a multidisciplinary context. A comparative analysis has been undertaken between core property units and more generic units offered in a multidisciplinary context from introductory, intermediate and advanced years within the property program. This analysis was based on data collected from course performance surveys, student performance results, a student focus group and was informed by a reflective process from the student perspective and lecturer/ tutor feedback. The study showed that there are many benefits associated with multidisciplinary unit offerings across the QUT Urban Development program particularly in the more generic units. However, these units require a greater degree of management. It is more difficult to organise, teach and coordinate multidisciplinary student cohorts due to a difference in prior knowledge and experience between each of the discipline groups. In addition, the interaction between lecturers/ tutors and the students frequently becomes more limited. A perception exists within the student body that this more limited face to face contact with academic staff is not valuable which may be exacerbated by the quality of complimentary online teaching materials. For many academics, non-attendance at lectures was coupled with an increase in email communication. From the limited data collected during the study there appears to be no clear correlation between large multidisciplinary student classes and student academic performance or satisfaction.

An Analysis of UK Farmland : 1981-2004

The importance of agriculture in many countries has tended to reduce as their economies move from a resource base to a manufacturing industry base. Although the level of agricultural production in first world countries has increased over the past two decades, this increase has generally been at a less significant rate compared to other sectors of the economies. Despite this increase in secondary and high technology industries, developed countries have continued to encourage and support their agricultural industries. This support has been through both tariffs and price support. Although the average farm production property may require this support to maintain long-term production, the better farms can actually achieve production levels and commodity prices that result in these units being competitive on a free market basis. This paper will analyse the total return performance of UK farmland over the period 1981-2004. This analysis will compare the total return from rural properties in the UK and compare this performance to commercial property returns (total, office, retail, industrial), equities and gilts over this 24-year period. The analysis will be based on the IPD UK let land index and the IPD property index. The portfolio diversification and risk-reduction benefits of UK farmland will be highlighted. The analysis shows that rural property has negative correlations with equities and gilts, as well as insignificant positive correlations with retail, industrial and office property. Rural property also provides portfolio diversification benefits.

Property and valuation education : an analysis of UWS property students from 1994 to 2006

The valuation and property is an evolving industry and the participants within the industry are also changing. This change is due to improved technology and construction, global nature of business today, professional standards, legal and accounting issues and environmental matters. Throughout this change in the property industry, there has also been significant change in the structure and content of tertiary property courses in Australia. Over the past thirteen years each first year cohort commencing study in the property program at the University of Western Sydney have been surveyed in relation to their background, reasons for course selection and job expectations. This paper will review this annual survey and the profile of all first year students who commenced their studies in the Bachelor of Business (Property) degree [formerly Bachelor of Commerce (Property Economics) and Bachelor of Commerce (Land Economy)] for years commencing 1994 to 2006. The paper will also provide a detailed analysis of the type of student entering the property industry and their exposure to the valuation and property sectors prior to commencing their studies.

Real estate agency practice and profitability : an analysis of house sales and agency profitability in Sydney

Large cities provide a broad range of residential property types, as well as a range of socio-economic locations. This results in a significant variation in residential property prices across both the city itself and the individual suburbs. The only constant across such a diverse range of residential property is the need for the majority of residential property owners to employ the services of a real estate agent to sell their property or to purchase a residential property. This paper will analyse the Sydney residential property market over the period 1994 to 2002 to determine the change in real estate offices numbers over the period, the profitability of real estate agency offices based on the residential house price performance of houses and units in these specific locations and the extent of changing residential house prices on agency profitability. Suburbs have been selected to provide a full range of housing types, socio-economic areas, older established and developing residential suburbs and location from the

Changing face of property students : an analysis of UWS property students from 1994 to 2003

Property is an evolving industry and the participants within the industry are also changing. This change is due to improved technology and construction, global nature of business today, professional standards, legal and accounting issues and environmental matters. Throughout this change in the property industry, there has also been significant change in the structure and content of tertiary property courses in Australia. Over the past ten years each first year cohort commencing study in the property program at the University of Western Sydney have been surveyed in relation to their background, reasons for course selection and job expectations. This paper will review the annual survey and the profile of all first year students who commenced their studies in the Bachelor of Business (Property Economics) degree [formerly Bachelor of Commerce (Property Economics) and Bachelor of Commerce (Land Economy)] for years commencing 1994 to 2003.

Calculation of habitable dwelling surfaces : an empirical analysis for the agglomerations of Munich and Sydney

In many countries the calculation of habitable dwelling surface is characterised by a chaotic variety of calculation variants hardly comprehensible for the end user - sometimes not even reproducible for the expert. Therefore dossiers were analysed on the basis of a random choice in order to determine the method according to which the habitable dwelling surface was measured and to find out wether customers can scrutinize the calculations. The paper compares Sydney and Munich, where in both cases property prices are situated at the high end of the market

An analysis and comparison of rural land sales

Rural land prices, in developed, free trade real estate markets, are influenced not only by prevailing economic conditions but also physical factors such as climate, topography and soil type. In broad acre farming and grazing operations, both commodity price and yields determine farm income. Yields, in turn, are a function of climate, topography and soil type. The strength of a rural land market is influenced by the overall rural economy in a Country, State or region. These differences in rural land markets can also vary within smaller regions. It has been held that rural land, in relative safe production areas, is less effected by adverse economic and climatic factors than land in more marginal agricultural areas. This paper will analyse rural land sales in both traditional cropping areas and marginal cropping areas for the period 1975 to 1996. The analysis will determine the overall trend in rural land prices over the period, compare the average annual return between marginal and established farming areas and determine which economic and production factors have influenced this change. The impact of this analysis will also be discussed in relation to rural land appraisal.