Distal extension removable partial denture with resilient attachment connect to an anterior fixed implant-supported prosthesis: a clinical report

Background: Considering the limited qualitative and quantitative bone in the posterior arch, this modality of prosthetic treatment could provide a positive emotional factor reestablished by immovability of the anterior fixed implant-supported segment. Objective: This clinical report demonstrates the possibility of achieving positive results with a removable partial denture connected to an implant-supported fixed prosthesis associated to an extra resilient attachment. Clinical significance: In cases of posterior mandibular and maxilla atrophy added to the patients desire against the bone graft, this kind of prosthetic treatment has an important place as an alternative.

Analysis of association between posterior crossbite, median line deviation and facial asymmetry

Facial asymmetry is a common human characteristic and can occur on many levels, originate of genetic factors, and can be caused by traumas or due to cross bite and/or muscular disability. The aim of this study was to evaluate the relation between posterior crossbite, median line deviation and facial asymmetry. For this study 70 children aged between 3 and 10 years-old were examined and photographed. Using Microsoft Office Power Point 2007, horizontal lines and one vertical line on median line were drawn, to subjectively analyze facial discrepancies. In relation to overjet, the majority of children (78.6%) showed normal relation, followed by high overjet (17.1%), anterior crossbite (4.3%). In relation to overbite, the majority of children (60%) showed normal relation, 27.1% anterior opened bite (negative overbite), and 12.9% showed high overbite. Posterior crossbite was present in 27.1% of children. Among them, 68.4% showed unilateral crossbite on right side, 21.1% bilateral crossbite and 10.5% unilateral crossbite on left side. The relation between posterior crossbite and facial asymmetry, according to Fisher´s Exact Test (p=0.0970), there was no statistically significant association. In relation to median line, the association was statistically significant with posterior crossbite (p=0.0109) and with facial asymmetry (p=0.0310). There was association between posterior crossbite and median line deviation. There was no association between posterior crossbite and facial asymmetry.

Análise da distribuição de tensões em reabilitação com implantes cone morse em maxilar posterior: estudo pelo MEF 3D não linear

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Raphidascaris camura sp. n., Hysterothylacium eurycheilum (Olsen) comb. n. and Comments on Heterotyphlum Spaul (Nematoda: Ascaroidea) in Marine Fishes

Raphidascaris camura sp. n. infected the stomach and intestine of Pomatomus saltatrix (type host), from the northern Gulf of Mexico. It is characterized by having the following combination of features: 31 to 40 pairs of preanal papillae, 10 pairs of postanal papillae with the third papilla from the posterior extremity doubled, nearly equal spicules 1.8 to 2.7% of the body length, and lateral alae abruptly curved near their anterior extremity. Additional species of Raphidascaris were examined and are discussed. Hysterothylacium eurycheilum (Olsen, 1952) comb. n. (=Heterotyphlum e.) from Epinephelus itajara in Florida and the Lesser Antilles, previously known from female worms only, is redescribed as is the anterior end of Heterotyphlum himantolophi Spaul, 1927.

Organization of Sporulated Oocysts of Eimeria funduli in the Gulf Killifish, Fundulus grandis

Oocysts of Eimeria funduli were studied by transmission electron microscopy in naturally-infected livers of the Gulf killifish, Fundulus grandis. Tissues were cryo-processed because membranous structures in the oocyst appear to hinder routine fixation and embedment. The oocyst wall (about 25 nm thick) was adjacent to the host cell and consisted of an outer membrane that limited the host cell cytoplasm and an inner membrane separated from the outer membrane by a narrow space. In some specimens, dense material was applied to the inner face of the inner membrane. Individual sporocysts were surrounded by a membranous "veil" (about 25 nm thick) that consisted of two unit membranes. Sporopodia, projections of the sporocyst wall, supported the veil. The sporocyst wall (130-150 nm thick) consisted of two layers, a thin electron-lucent outer layer (about 10 nm thick) and a thick electron dense inner layer (about 130 nm thick). Depending on the plane of section, the inner layer had transverse striations with periods of 3 to 4 nm or 12 to 15 nm. A narrow fissure, broadest at the anterior pole of the sporocyst, extended about one-third the length of the sporocyst wall. The posterior pole of the sporocyst was characterized by a bulbous swelling. Although this swelling resembled a Stieda body in light microscopic preparations, ultrastructurally, the swelling was a knoblike thickening in the sporocyst wall and did not plug a gap in this wall

Examination of Homalometron elongatum Manter, 1947 and Description of a New Congener from Eucinostomus currani Zahuranec, 1980 in the Pacific Ocean off Costa Rica

Homalometron elongatum is reexamined using heat-killed material that was not subjected to pressure during fixation from Gerres cinereus collected from San Juan Harbor, Puerto Rico, U.S.A. The new material is compared with some paratype specimens and differs by having a much less variable forebody length, and a median rather than submedian genital pore. Tegumental spines reportedly cover the anterior end of the body but we observed tegumental spines covering the entire body surface in both the paratype and new material. Homalometron lesliorum n. sp. is described from Eucinostomus currani from the Pacific coasts of Costa Rica and Nicaragua. The new species has three pairs of oral papillae surrounding the mouth and thus resembles three other congeners: H. elongatum, Homalometron carapevae, and Homalometron papilliferum. Homalometron lesliorum n. sp. is distinguished from the three species by having the anterior extent of the vitelline follicles at or above the base of the ventral sucker, compared with posterior to the ventral sucker at the level of the seminal vesicle (H. elongatum) or further posterior at the posterior margin of the ovary (H. carapevae and H. papilliferum). The four species are further differentiated from one another by sucker width ratio, tegumental spine size and distribution, egg size, host preference, and biogeography. Comparison of nuclear ribosomal DNA (3' end of 18S, internal transcribed spacer [ITS]1, ITS2, and 5' end of 28S) between H. elongatum and H. lesliorum n. sp. revealed one variable base (n = 162) at the 3' end of 18S, 12 variable bases (n = 476) at ITS1, 10 variable bases (n = 310) at ITS2, and 11 variable bases (n = 1,325) at the 5' end fragment of 28S. Nuclear ribosomal DNA from Homalometron pallidum and Homalometron armatum are included for further comparison with H. elongatum and H. lesliorum n. sp.

Taxonomic Status and Redescription of the Gillbacker Sea Catfish (Siluriformes: Ariidae: Sciades parkeri)

The Gillbacker Sea Catfish is a valid species of ariid catfish from the northeastern coast of South America. There are many synonyms In the literature for the Gillbacker Sea Catfish and even recent classifications have used different scientific names. Examination of a wide range of sizes of Individuals from different localities and examination of types and original species descriptions of Silurus parkeri, Bagrus flavescens, B. emphysetus, Arius physacanthus, A. bonneti, A. clavispinosus, and A. despaxi has lead us to the conclusion that all these names refer to the Gillbacker Sea Catfish and the valid name for the species is Sciades parkeri. The species is distinguished from all other ariid species by the following combination of features: body coloration yellow; swim bladder divided Into three chambers, posterior chamber moderately sized; nuchal plate shield-shaped, usually larger than supraocciptal process; anterior notch of nuchal plate absent; head shield exposed and granulated In orbital and postorbital regions; lateral edge of accessory patches not emarginated or shallowly notched; fleshy furrow connecting posterior nares absent; and mesial gill rakers absent from first two gill arches. Striking intraspecific and/or ontogenetic variation In eye size, maxillary-barbel length, supraoccipital-process size, nuchal-plate size and shape, and dorsal-spine thickness contributed to the numerous synonyms and misidentifications for Sciades parkeri. Bagrus albicans, described from French Guiana, has at times been listed as a synonym of Sciades parkeri. Our examination of the holotype of B. albicans, however, led us to conclude that It is a synonym of Sciades proops.

Retrospective Clinical Study of 988 Dual Acid-Etched Implants Placed in Grafted and Native Bone for Single-Tooth Replacement

Purpose: To evaluate the influence of sex, implant characteristics, and bone grafting on the survival rate of dual acid-etched (DAE) implants. Materials and Methods: Patients treated with internal-hex DAE implants for single-tooth replacement in a military dental clinic between January 2005 and December 2010 were included in this study. Clinical data related to implant characteristics, implant location, presence of grafted bone, and implant failures were collected. The primary outcome was implant loss. The survival rate was analyzed using the Kaplan-Meier method. Cox regression modeling was used to determine which factors would predict implant failure. Results: DAE implants were evaluated in a total of 988 patients (80.3% men). Twenty-four (2.4%) implants failed, most were cylindric (54.2%) with regular platforms (70.8%) and were 10 mm long (58.3%). The failure rate was 2.4% for the anterior maxilla, 3.3% for the posterior maxilla, 1.6% for the anterior mandible, and 2.0% for posterior mandible. The cumulative survival rate was 97.6%. The failure rate was 8.8% in implants placed after sinus augmentation, 7.3% in bone block-grafted areas, and 1.6% in native bone. Based on multivariable analysis (Cox regression), sinus augmentation and bone block grafting had a statistically significant effect on implant failure; the hazard ratios were 5.5 and 4.6, respectively. Conclusion: The results revealed that DAE implants had high survival rates, and no influence of sex, location, shape, diameter, or length on failure rates could be observed. However, a significant association was observed between failure and presence of bone graft in the implant area. Int J Oral Maxillofac Implants 2012;27:1243-1248

Influence of pulp condition on the accuracy of an electronic foramen locator in posterior teeth: an in vivo study

The aim of this study was to assess, in vivo, the accuracy of the NovApex (R) electronic foramen locator in determining working length (WL) in vital and necrotic posterior teeth. The NovApex (R) was used in 144 canals: 35 teeth with vital pulps (68 canals) and 42 teeth with necrotic pulps (76 canals). WL was measured with the NovApex (R) locator and confirmed using the radiographic method. Differences between electronic and radiographic measurements ranging between 0.0 and 0.4 millimeters were classified as acceptable; differences equal to or greater than 0.5 millimeter were considered unacceptable. Pearson's chi-square test was used to assess the influence of pulp condition on the accuracy of NovApex (R) (alpha = 0.05). Regardless of pulp condition, differences between electronic and radiographic WL measurements were acceptable in 73.61% of the canals. No statistically significant differences in accuracy were observed when comparing vital and necrotic canals (p > 0.05). There were 38 unacceptable measurements. In none of these cases was the file tip located beyond the radiographic apex; in 32, it was located short of the NovApex (R) measurement. Pulp condition had no significant effect on the accuracy of NovApex (R).

Dentoalveolar comparative study between removable and fixed cribs, associated to chincup, in anterior open bite treatment

Objective: The aim of this prospective study was to compare the dentoalveolar effects produced by two types of palatal crib, removable (Rpc+C) and fixed (Fpc+C), combined with chincup in growing patients with anterior open bite. Material and Methods: Each group comprised 30 patients, in the mixed dentition phase, with similar cephalometric characteristics and skeletal ages. Group 1 (Rpc+ C) presented initial mean age of 8.3 years and mean anterior open bite of 4.0 mm. Group 2 (Fpc+C) presented initial mean age of 8.54 years and mean anterior open bite of 4.3 mm. The evaluation period comprised 12 months between initial (T1) and second lateral radiograph (T2). The T2-T1 changes were compared cephalometrically in the 2 groups using the non-paired t-test. Results: Vertical changes in the posterior dentoalveolar region were similar between the groups (about 1 mm) and no significant differences were found in molar mesialization. The Fpc+C group had in average 1.6 mm more improvement of the overbite as a result of greater maxillary incisor extrusion (1.3 mm). Patients in this group also presented less lingual tipping of maxillary incisors and more mandibular incisors uprighting. Conclusions: The Fpc+C combination was more efficient in the correction of the negative overbite mainly due to greater extrusion of the maxillary incisors. However, the Rpc+C appliance promoted better upper and lower incisor inclination, resulting in a more adequate overjet.

A new species of Anchoviella Fowler, 1911 (Clupeiformes: Engraulidae) from the Amazon basin, Brazil

Anchoviella juruasanga is described from the drainages of rios Negro, Madeira, Tapajós, Trombetas, Tocantins, and Jari, in the Amazon basin, Brazil. The new species is distinguished from its congeners by having a short upper jaw, with its posterior tip extending between the verticals through anterior and posterior margins of the pupil (vs. posterior tip of upper jaw extending beyond the vertical through posterior margin of the pupil). Anchoviella juruasanga is also distinct from other strictly freshwater Amazonian species of the genus by the distance from tip of snout to posterior end of upper jaw between 8 and 11% in standard length (vs. 14% or more in A. alleni, A. carrikeri, A. guianensis, and A. jamesi). The anal-fin origin slightly posterior to or at the vertical through the base of the last dorsal-fin ray further distinguishes the new species from A. alleni (anal-fin origin posterior to the vertical through the last anal-fin ray by at least 14% of head length) and A. jamesi (anal-fin origin anterior to the vertical through the last anal-fin ray). An identification key for the Amazonian species of Anchoviella, including marine and estuarine species known to occur in the lower portion of the basin, is presented.

Stability of maxillary anterior crowding treatment

OBJECTIVE: To evaluate the stability and the relapse of maxillary anterior crowding treatment on cases with premolar extraction and evaluate the tendency of the teeth to return to their pretreatment position. METHODS: The experimental sample consisted of 70 patients of both sex with an initial Class I and Class II maloclusion and treated with first premolar extractions. The initial mean age was 13,08 years. Dental casts' measurements were obtained at three stages (pretreatment, posttreatment and posttreatment of 9 years on average) and the variables assessed were Little Irregularity Index, maxillary arch length and intercanine. Pearson correlation coefficient was used to know if some studied variable would have influence on the crowding in the three stages (LII1, LII2, LII3) and in each linear displacement of the Little irregularity index (A, B, C, D, E) in the initial and post-retention phases. RESULTS: The maxillary crowding relapse ( LII3-2) is influenced by the initial ( LII1), and the teeth tend to return to their pretreatment position. CONCLUSION: The results underline the attention that the orthodontist should be given to the maxillary anterior relapse, primarily on those teeth that are crowded before the treatment.

Biomechanics of sprint running: a methodological contribution

Sports biomechanics describes human movement from a performance enhancement and an injury reduction perspective. In this respect, the purpose of sports scientists is to support coaches and physicians with reliable information about athletes’ technique. The lack of methods allowing for in-field athlete evaluation as well as for accurate joint force estimates represents, to date, the main limitation to this purpose. The investigations illustrated in the present thesis aimed at providing a contribution towards the development of the above mentioned methods. Two complementary approaches were adopted: a Low Resolution Approach – related to performance assessment – where the use of wearable inertial measurement units is exploited during different phases of sprint running, and a High Resolution Approach – related to joint kinetics estimate for injury prevention – where subject-specific, non-rigid constraints for knee joint kinematic modelling used in multi-body optimization techniques are defined. Results obtained using the Low Resolution Approach indicated that, due to their portability and inexpensiveness, inertial measurement systems are a valid alternative to laboratory-based instrumentation for in-field performance evaluation of sprint running. Using acceleration and angular velocity data, the following quantities were estimated: trunk inclination and angular velocity, instantaneous horizontal velocity and displacement of a point approximating the centre of mass, and stride and support phase durations. As concerns the High Resolution Approach, results indicated that the length of the anterior cruciate and lateral collateral ligaments decreased, while that of the deep bundle of the medial collateral ligament increased significantly during flexion. Variations of the posterior cruciate and the superficial bundle of the medial collateral ligament lengths were concealed by the experimental indeterminacy. A mathematical model was provided that allowed the estimate of subject-specific ligament lengths as a function of knee flexion and that can be integrated in a multi-body optimization procedure.

Core-shell macromolecules with dendritic polyphenylene core and polymer shells

Core-shell macromolecules with dendritic polyphenylene core and polymer shell Zusammenfassung / Abstract Core-shell macromolecular structures have become of great interest in materials science because they gave an opportunity to combine a large variety of chemical and physical properties in the single molecule, by combination of different (in terms of chemistry and physics) cores and shells. The interest in such complex structures was provoked by their potential applications in the coating and painting industry (latexes), as supports for catalysts in polymer industry, or as nano-containers and transporters for genes or drug delivery. The aim of this study was the synthesis, characterization and further application of core-shell macromolecules possessing a hydrophobic stiff core (polyphenylene dendrimers) surrounded with a hydrophilic, soft, covalently bonded polymer shell (poly(ethylene oxide) and its copolymers). The requirements for such complex substances were that they should be well-defined in terms of molecular weight (narrow molecular weight distribution) and in molecular structure. The preparation of core-shell molecules containing dendrimer as a core was possible via two synthetic routs: “grafting-onto” and “grafting-from”. The resulting core-shell macromolecules possessed narrow polydispersity as guaranteed by the excellent structural and functional definition of the dendrimer and the narrow polydispersity of the PEO, PS-b-PEO and PI-b-PEO attached to the dendrimer surface. Additional investigation of the size of the particles indicated a relation between both the length and the number of the polymer chains and the hydrodynamic radius determined by Dynamic Light Scattering and Fluorescent Correlation Spectroscopy. Core-shell nano-particles were applied as metallocene supports in heterogeneous olefin polymerizations. Our results indicate that such catalyst systems, that have a size of at least one order of magnitude smaller than the used by now organic supports, could be very useful as model compounds for investigations on catalyst fragmentation and its influence on the product parameters.

Core-shell particles and their application for superhydrophobic surfaces

During the last years great effort has been devoted to the fabrication of superhydrophobic surfaces because of their self-cleaning properties. A water drop on a superhydrophobic surface rolls off even at inclinations of only a few degrees while taking up contaminants encountered on its way. rnSuperhydrophobic, self-cleaning coatings are desirable for convenient and cost-effective maintenance of a variety of surfaces. Ideally, such coatings should be easy to make and apply, mechanically resistant, and long-term stable. None of the existing methods have yet mastered the challenge of meeting all of these criteria.rnSuperhydrophobicity is associated with surface roughness. The lotus leave, with its dual scale roughness, is one of the most efficient examples of superhydrophobic surface. This thesis work proposes a novel technique to prepare superhydrophobic surfaces that introduces the two length scale roughness by growing silica particles (~100 nm in diameter) onto micrometer-sized polystyrene particles using the well-established Stöber synthesis. Mechanical resistance is conferred to the resulting “raspberries” by the synthesis of a thin silica shell on their surface. Besides of being easy to make and handle, these particles offer the possibility for improving suitability or technical applications: since they disperse in water, multi-layers can be prepared on substrates by simple drop casting even on surfaces with grooves and slots. The solution of the main problem – stabilizing the multilayer – also lies in the design of the particles: the shells – although mechanically stable – are porous enough to allow for leakage of polystyrene from the core. Under tetrahydrofuran vapor polystyrene bridges form between the particles that render the multilayer-film stable. rnMulti-layers are good candidate to design surfaces whose roughness is preserved after scratch. If the top-most layer is removed, the roughness can still be ensured by the underlying layer.rnAfter hydrophobization by chemical vapor deposition (CVD) of a semi-fluorinated silane, the surfaces are superhydrophobic with a tilting angle of a few degrees. rnrnrn