Long-term clinical evaluation of the color stability and stainability of acrylic resin denture teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Deriving vegetation indices for phenology analysis using genetic programming

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of hydrogen peroxide concentration on enamel color and microhardness

Objectives: The aim of this study was to investigate the effect of hydrogen peroxide gels with different concentrations (20%, 25%, 30%, and 35%) on enamel Knoop microhardness (KNIT) as well as on changes in dental color (C).Methods: Cylindrical specimens of enamel/dentin (3-nun diameter and 2-nun thickness) were obtained from bovine incisors and randomly divided into six groups (n=20), according to the concentration of the whitening gel (20%, 25%, 30%, 35%, control, thickener). After polishing, initial values of KNH0 and color measurement, assessed by spectrophotometry using the CIE L*a*b* system, were taken from the enamel surface. The gels were applied on the enamel surface for 30 minutes, and immediate values of KNHi were taken. After seven days of being stored in artificial saliva, new measures of KNH7 and color (L-7* a(7)* b(7)*, for calculating Delta E, Delta L, and Delta b) were made. Data were submitted to statistical analysis of variance, followed by Tukey test (p<0.05).Results: Differences in gel concentration and time did not influence the microhardness (p=0.54 and p=0.29, respectively). In relation to color changes, Delta E data showed that the 35% gel presented a higher color alteration than the 20% gel did (p=0.006).Conclusion: Bleaching with 35% hydrogen peroxide gel was more effective than with the 20% gel, without promoting significant adverse effects on enamel surface microhardness.

Effect of different solutions on color stability of acrylic resin-based dentures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of polymerization methods and thermal cycling on color stability of acrylic resin denture teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of soil texture in the recovery of Toxocara canis eggs by a flotation method

In epidemiological surveys, the evaluation of soil contamination by Toxocara canis eggs requires a quick and easy method for the isolation of parasite eggs from soil samples. The efficiency of flotation methods is influenced by sample size, soil texture, degree of soil contamination, pretreatment, flotation solutions and time of flotation. This investigation was designed to evaluate the influence of soil texture in the recovery of T. canis eggs with the centrifugal flotation technique of Dada (Dada, B.J.O., 1979. A new technique for the recovery of Toxocara eggs from soil. J. Helminthol., 53: 141-144). Four types of soil (clay silt, sandy, silty clay and sand) were artificially contaminated with T. canis eggs (200 eggs per gram). Zinc sulphate (specific gravity 1.20) and sodium dichromate (specific gravity 1.35) were used as flotation solutions. Twenty replicated examinations were performed for each type of soil and flotation solution. There was a statistically significant difference in the results depending on soil type. The highest recovery percentages were observed in soils rich in sand (62.5% for sand and 38.0% for sandy soil). Differences were also observed with different flotation solutions. Sodium dichromate solution was more efficient for recovering T. canis eggs, regardless of the soil texture. © 1994.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Effect of postpolymerization method on the color stability of composite resins submitted to ultraviolet aging

The aim of this research was to evaluate the effect of postpolymerization method on the color stability of resin-based composites. Samples of direct and indirect restorative materials were polymerized with two photo-curing units (Visio photo-curing oven system and LED Elipar Freelight 2). All samples were submitted to an initial chromatic analysis using a spectrometer and submitted to ultraviolet-accelerated artificial aging. The direct material showed less color change than the indirect material, independent of the photo-activation method used. Samples photo cured with the LED system showed less change than those photo cured with the Visio system. The postpolymerization oven did not improve the color stability of direct and indirect resin-based composites.

Analysis of the peri-implant soft tissues in contact with zirconia abutments: an evidence-based literature review

The aim of this study is to evaluate through a literature review, the soft tissue response in contact with zirconia abutments, including case reports comparing prosthetics rehabilitations with zirconia and titanium abutments upto 3 years of follow-up as well as the factors that should be considered on implant's abutment selection. Metallic abutments can provide grayish color when in contact with thin soft tissues which may lead the implant prosthetic treatment to failure. In this context, the abutments of zirconia stand out because there is an excellent linking between esthetics and the health of peri-implant soft tissues. A consult of the published researches was made on the PubMed database from 2000 to September 2012. The including criteria were: literature reviews, clinical studies and case reports in English that focused on the response of the soft tissue in contact with zirconia implant abutments. The studies that were not in English and did not match the tackled issue were excluded. A total of 32 articles were found. According to the search strategy, just 16 articles were selected for this review. Three studies affirmed that zirconia abutments have an excellent soft tissue response; one study showed increased gingival recession with zirconia abutments and nine studies do not stand out any difference on biological behavior between titanium and zirconia abutments. Three studies affirmed that zirconia abutments provide natural gingival appearance, anatomic contour and greater esthetics. The use of zirconia abutments is recommended for anterior regions because of their greater optical properties and esthetic results and more studies should be performed and analyzed longitudinally regarding their biological response. The zirconia abutments have been established to be essential in order to achieve great esthetic results in cases of thin peri-implant soft tissues and in regions where the three-dimensional placement of implants is more superficial.

Color stability of the artificial iris button in an ocular prosthesis before and after acrylic resin polymerization

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of residual stress and hardness in regions of pre-manufactured and manual bends in fixation plates for maxillary advancement

The aim of this study was to analyze, through Vickers hardness test and photoelasticity analysis, pre-bent areas, manually bent areas, and areas without bends of 10-mm advancement pre-bent titanium plates (Leibinger system). The work was divided into three groups: group I-region without bend, group II-region of 90° manual bend, and group III-region of 90° pre-fabricated bends. All the materials were evaluated through hardness analysis by the Vickers hardness test, stress analysis by residual images obtained in a polariscope, and photoelastic analysis by reflection during the manual bending. The data obtained from the hardness tests were statistically analyzed using ANOVA and Tukey's tests at a significance level of 5 %. The pre-bent plate (group III) showed hardness means statistically significantly higher (P < 0.05) than those of the other groups (I-region without bends, II-90° manually bent region). Through the study of photoelastic reflection, it was possible to identify that the stress gradually increased, reaching a pink color (1.81 δ / λ), as the bending was performed. A general analysis of the results showed that the bent plate region of pre-bent titanium presented the best results.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Bacterial oxycarotenoids added into broiler chickens ration modify breast meat color

Some markets around the world demand for well pigmented poultry products, what justifies the intentional use of synthetic additives in rations during breeding. The inconvenient for that practice most times is the elevated price of these products, beyond the argument of being chemicals, which may not be viable for some production systems. So, the aim of this experiment was to check on the ability of natural red oxycarotenoids produced by R. gelatinosus to modify broilers breast meat color. Bacterial biomass containing oxycarotenoids were added into Cobb broilers finisher diets at 0, 1.0, 2.0 and 3.0 g/kg and fed during 10 days (35-45 d). Five replicates (10 birds each) were performed. At days 35, 37, 39, 41, 43 and 45, 100 birds were slaughtered scalded, defeathered and eviscerated. Data on live and carcass weights were recorded. After cooling, color parameters of meat were determined on breast surface using a HunterLab XE Plus colorimeter calibrated with black and white standard tiles. Regression analysis was used for the investigation of relationships between days of consumption and biomass concentration on color values, live weight and carcass yield. Results showed that redness of breast meat was significantly influenced by the biomass concentration in a linear effect (P=0.0056) and also by the time of consumption, in a quadratic effect (P=0.0232). Days of consumption also affected yellowness and lightness with significant quadratic responses (P=0.0225 and P<0.0001, respectively). Birds live weight increased significantly during the application of the experimental diets (P<0.0001), showing no negative influence of the biomass administration. Also no deleterious effects derived from the application of the product were observed on carcass yield. So we concluded that R. gelatinosus oxycarotenoids present in the bacterial biomass can modify broilers breast meat color, performing as an alternative pigmenting additive in poultry production.

Yolks color definition by supplementing yellow and red xanthophylls to hen's diets

Egg yolk color may be controlled both by the concentration and the type of xanthophylls added to diets, with the aim of meeting consumers demand. The objectives of this work were to study how yellow and red xanthophylls present in laying hens` diets influence yolks colors and find the concentrations of these ingredients that meet the regional consumer desire. A factorial design 5 x 3 with 5 concentrations of yellow xanthophylls (lutein + zeaxantin 40%; 1.0, 1.25, 1.5, 1.75 and 2.0 mg/hen/d) and 3 concentrations of red xanthophylls (canthaxantin 10%; 0, 0.35, 0.7 mg/hen/d) was used. After a 30 d period receiving corn basal diets and water ad libitum, 60 White Dekalbe hens were distributed to receive the 15 dietary treatments in 4 replicates. Diets were provided daily at 110 g, during 21 d under 16 h light/8 h dark. Yolks colors were evaluated daily using the CIE L, a, b color space and the Roche color index. After the color stabilization, data were analyzed by ANOVA, regression analysis and Response Surface Methodology (MRS). Global acceptance for the Roche colors was evaluated with a 5 points hedonic scale and data were analyzed by Friedman and Dunn tests. Significance was established at 95% (P < 0.05). Regression analysis showed that the red xanthophylls content was the most important factor that defined L, a and b values for yolk color (P < 0.0001; square function), although its effect was significantly affected by the yellow xanthophylls contents (P = 0.0277; P < 0.0001; P = 0.0002 for L, a, b, respectively), providing evidence for a synergistic effect and not for a saturation effect. MRS showed that the highest redness of yolks was reached with 1.5 mg/hen/d of yellow and 0.5 mg/hen/d of red xanthophylls. So, higher supplementations aiming at increasing yolk color would bring an unnecessary cost to the ration. The most accepted yolk color scored 9, which corresponded to mean color attributes L = 65; a = 16; and b = 64. MRS showed that these values could be reached with combinations of yellow:red xanthophylls like 1.0:0.15 or 1.5:0.1 mg/ hen/d or simply with the yellow xanthophylls at 2.0 mg/hen/d. So, it was concluded that both yellow and red xanthophylls are important to define yolks color; that high amounts of xanthophylls are unnecessary to bring changes to color; and that Brazilian consumer requires yolks color attainable with few amounts of red xanthophylls or only with the yellow ones.

Spectrophotometric evaluation of color changes of esthetic brackets stored in potentially staining solutions

The purpose of this study was to evaluate, in vitro, the chromatic behavior of esthetic brackets stored in potentially staining solutions. The sample were divided into four groups according to the commercial brand and stored in four different solutions (distilled water, cola soda, coffee and mouthrinse) at 37°C for 14 days. Possible color changes measured according to the CIE L*a*b* color system with a spectrophotometer at five intervals of time after storage. The statistical analysis was carried out using ANOVA to 1%, Tukey's tests and decomposition of interactions with a significance level of 5%.The color changes were dependent on the solution, storage time and the brand of brackets. The largest color changes were observed in the G3, followed by G2, G1/G4. The esthetic brackets do not present satisfactory and stable chromatic behavior.