Medidas de dispersão de gás em células mecânicas industriais e seus condicionantes.

A qualidade da dispersão de gás em células de flotação é comumente caracterizada através de parâmetros como velocidade superficial do gás (Jg), hold-up do gás (?g), distribuição de tamanho de bolha (db ou D3,2) e fluxo de superfície de bolha (Sb). Sendo um processo de separação de minerais que é dependente da interação (colisão + adesão) entre partículas hidrofóbicas e bolhas de ar, a flotação tem seu desempenho dependente de uma dispersão de gás apropriada na polpa de minério. Desta forma, este trabalho objetivou caracterizar o estado da dispersão de gás de duas células em um banco composto por quatro células Wemco de 42,5 m³ (subaeradas), operando em série na usina da Vale Fertilizantes (Cajati-SP). Realizaram-se três campanhas de medidas que foram conduzidas sob diferentes condições operacionais: a) Diâmetro do rotor (D) de 1,09 m e rotação (N) entre 145 RPM e 175 RPM; b) D = 0,99 m e N entre 110 RPM e 190 RPM; c) D = 0,99 m e N de 120 RPM e de 130 RPM. Observaram-se os seguintes valores de dispersão de gás: 0,7 <= Jg <= 5,4 cm/s, 7 <= ?g <= 15%, 1,6 <= D3,2 <= 2,4 mm e Sb na faixa de 24 a 162 s-1. A magnitude de Jg medida na 1ª e 2ª campanhas mostrou-se acima dos valores reportados pela literatura, indicando necessidade de modificação de condições operacionais dos equipamentos, assim como cuidadosa manutenção. Posteriormente, a 3ª campanha indicou maior conformidade dos parâmetros de dispersão de gás em relação à literatura, constatando-se uma considerável melhora de desempenho do processo de flotação.

Desenvolvimento de procedimento analítico para determinação de iodato em sal de mesa utilizando sistema com multicomutação e detecção espectrofotométrica

A iodação do sal de mesa é considerada o caminho mais eficiente para controlar os Distúrbios por Deficiência de Iodo. Em países tropicais, o elemento pode ser adicionado na forma de KIO3. Para garantir que os níveis ideais do ânion estejam disponíveis ao consumidor, o controle de qualidade do sal consiste numa estratégia fundamental. Sistemas em fluxo com multicomutação representam uma alternativa versátil para o desenvolvimento de procedimentos simples, rápidos e limpos, minimizando o consumo de reagentes e a geração de resíduos. Nesse contexto, um procedimento analítico utilizando sistema com multicomutação e detecção espectrofotométrica foi desenvolvido para a determinação de iodato em sal de mesa. A reação empregada foi baseada na formação de um composto roxo (540 nm) entre iodato (IO3-) e p-aminofenol (PAP) em meio ácido. O tempo de residência da zona de amostra no percurso analítico foi explorado a fim de favorecer a reação lenta e a frequência de amostragem para a melhoria do desempenho analítico. Foram selecionados 2 pulsos para inserção de amostra, 3 pulsos para reagente (PAP 0,25% (m/v) em HCl 0,025 mol L-1), 7 ciclos de amostragem, 200 pulsos de carregador (água), bolha de ar de 1 s (40 µL), reator de 70 cm (3 mm d.i.) e parada de fluxo de 480 s. Resposta linear foi observada entre 2,28x10-5 e 3,65x10-4 mol L-1, descrita pela equação A = 0,2443 + 2030 C, r = 0,997. Limite de detecção (99,7% de confiança), coeficiente de variação (n = 20) e frequência de amostragem foram estimados em 8,2x10-6 mol L-1, 0,42% e 70 determinações por hora, respectivamente. Houve consumo de 1,05 mg de PAP e geração de 0,70 mL de resíduos por determinação. As principais espécies concomitantes presentes na amostra não interferiram na determinação de iodato em concentrações até 8 vezes maiores que as usualmente encontradas. Estudos de adição e recuperação de iodato foram realizados pelo procedimento proposto, obtendo porcentagens de recuperação entre 88 e 104%. O procedimento analítico desenvolvido apresenta sensibilidade adequada para a determinação de iodato em amostra de sal de mesa e elevada frequência de amostragem quando comparado com procedimentos descritos na literatura

Modelos baseados em agentes aplicados à dinâmica de preços do mercado imobiliário

Um dos aspectos regulatórios fundamentais para o mercado imobiliário no Brasil são os limites para obtenção de financiamento no Sistema Financeiro de Habitação. Esses limites podem ser definidos de forma a aumentar ou reduzir a oferta de crédito neste mercado, alterando o comportamento dos seus agentes e, com isso, o preço de mercado dos imóveis. Neste trabalho, propomos um modelo de formação de preços no mercado imobiliário brasileiro com base no comportamento dos agentes que o compõem. Os agentes vendedores têm comportamento heterogêneo e são influenciados pela demanda histórica, enquanto que os agentes compradores têm o seu comportamento determinado pela disponibilidade de crédito. Esta disponibilidade de crédito, por sua vez, é definida pelos limites para concessão de financiamento no Sistema Financeiro de Habitação. Verificamos que o processo markoviano que descreve preço de mercado converge para um sistema dinâmico determinístico quando o número de agentes aumenta, e analisamos o comportamento deste sistema dinâmico. Mostramos qual é a família de variáveis aleatórias que representa o comportamento dos agentes vendedores de forma que o sistema apresente um preço de equilíbrio não trivial, condizente com a realidade. Verificamos ainda que o preço de equilíbrio depende não só das regras de concessão de financiamento no Sistema Financeiro de Habitação, como também do preço de reserva dos compradores e da memória e da sensibilidade dos vendedores a alterações na demanda. A memória e a sensibilidade dos vendedores podem levar a oscilações de preços acima ou abaixo do preço de equilíbrio (típicas de processos de formação de bolhas); ou até mesmo a uma bifurcação de Neimark-Sacker, quando o sistema apresenta dinâmica oscilatória estável.

Washcoated Pd/Al2O3 monoliths for the liquid phase hydrodechlorination of dioxins

The catalytic activity and durability of 2 wt.% Pd/Al2O3 in powder and washcoated on cordierite monoliths were examined for the liquid phase hydrodechlorination (LPHDC) of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs), also known as dioxins. NaOH was employed as a neutralizing agent, and 2-propanol was used as a hydrogen donor and a solvent. Fresh and spent powder and monolith samples were characterized by elemental analysis, surface area, hydrogen chemisorption, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX), and transmission electron microscopy/energy dispersive X-ray spectroscopy (TEM/EDX). Three reactor configurations were compared including the slurry and monolith batch reactors as well as the bubble loop column resulting in 100, 70, and 72% sample toxicity reduction, respectively, after 5 h of reaction. However, the slurry and monolith batch reactors lead to catalyst sample loss via a filtration process (slurry) and washcoat erosion (monolith batch), as well as rapid deactivation of the powder catalyst samples. The monolith employed in the bubble loop column remained stable and active after four reaction runs. Three preemptive regeneration methods were evaluated on spent monolith catalyst including 2-propanol washing, oxidation/reduction, and reduction. All three procedures reactivated the spent catalyst samples, but the combustion methods proved to be more efficient at eliminating the more stable poisons.

An obscured cluster associated with the H II region RCW173

Context. The discovery of several clusters of red supergiants towards l = 24°−30° has triggered interest in this area of the Galactic plane, where lines of sight are very complex and previous explorations of the stellar content were very preliminary. Aims. We attempt to characterise the stellar population associated with the H ii region RCW 173 (=Sh2-60), located at, as previous studies have suggested that this population could be beyond the Sagittarius arm. Methods. We obtained UBV photometry of a stellar field to the south of the brightest part of RCW 173, as well as spectroscopy of about twenty stars in the area. We combined our new data with archival 2MASS near-infrared photometry and Spitzer/GLIMPSE imaging and photometry, to achieve a more accurate characterisation of the stellar sources and the associated cloud. Results. We find a significant population of early-type stars located at d = 3.0 kpc, in good agreement with the “near” dynamical distance to the H ii region. This population should be located at the near intersection of the Scutum-Crux arm. A luminous O7 II star is likely to be the main source of ionisation. Many stars are concentrated around the bright nebulosity, where GLIMPSE images in the mid infrared show the presence of a bubble of excited material surrounding a cavity that coincides spatially with a number of B0-1 V stars. We interpret this as an emerging cluster, perhaps triggered by the nearby O7 II star. We also find a number of B-type giants. Some of them are located at approximately the same distance, and may be part of an older population in the same area, characterised by much lower reddening. A few have shorter distance moduli and are likely to be located in the Sagittarius arm. Conclusions. The line of sight in this direction is very complex. Optically visible tracers delineate two spiral arms, but seem to be absent beyond d ≈ 3 kpc. Several H ii regions in this area suggest that the Scutum-Crux arm contains thick clouds actively forming stars. All these populations are projected on top of the major stellar complex signposted by the clusters of red supergiants.

La crisis del modelo actual. Los MOOC y la búsqueda de un modelo de negocio

La actual crisis económica ha tenido impacto en prácticamente todos los sectores socioeconómicos, entre los que se incluye la educación como uno de los grandes perjudicados. En este momento de incertidumbre sobre la viabilidad de la educación tradicional y la supuesta burbuja en la enseñanza (agravada por las tasas de paro juvenil), surgen los MOOC como respuesta a la necesidad de acercamiento entre la formación y la sociedad del conocimiento. Pero que los cursos masivos y abiertos marquen el futuro de la educación dependerá en gran medida de su viabilidad económica. Aunque aun no se haya encontrado un modelo de negocio definitivo, las plataformas de MOOC experimentan con diferentes alternativas que, unidas a la escalabilidad de los proyectos, es previsible que generen grandes resultados.

Deep Anterior Lamellar Keratoplasty versus Penetrating Keratoplasty for Macular Corneal Dystrophy: A Randomized Trial

Purpose: To compare outcomes of big-bubble deep anterior lamellar keratoplasty (DALK) and penetrating keratoplasty (PK) for macular corneal dystrophy. Design: Prospective, randomized, interventional case series. Methods: Setting: Single hospital. Patients: Eighty-two eyes of 54 patients requiring keratoplasty for the treatment of macular corneal dystrophy without endothelial involvement were included. Main outcome measures: Operative complications, uncorrected visual acuity, best-corrected visual acuity, contrast sensitivity function, higher-order aberrations, and endothelial cell density were evaluated. Results: The DALK and PK group consisted of 35 and 41 eyes, respectively. Best-corrected visual acuity after surgery was 20/40 or better 68.5% and 70.7% of the eyes in the DALK and PK groups, respectively (P > .05). No statistically significant differences between groups were found in contrast sensitivity function with and without glare for any spatial frequency (P > .05). Significantly higher levels of higher-order aberrations were found in the DALK group (P < .01). In both groups, a progressive and statistically significant reduction in endothelial cell density was found (P < .01). At the last follow-up, the mean endothelial cell loss was 18.1% and 26.9% in DALK and PK groups, respectively (P = .03). Graft rejection episodes were seen in 5 eyes (12.1%) in the PK group, and regrafting was necessary in 3 eyes (7.3%). Recurrence of the disease was documented in 5.7% and 4.8% of the eyes in the DALK and PK groups, respectively. Conclusions: Deep anterior lamellar keratoplasty with the big-bubble technique provided comparable visual and optical results as PK and resulted in less endothelial damage, as well as eliminating endothelial rejection in macular corneal dystrophy. Deep anterior lamellar keratoplasty surgery is a viable option for macular corneal dystrophy without endothelial involvement.

Plastisol foaming process. Decomposition of the foaming agent, polymer behavior in the corresponding temperature range and resulting foam properties

The decomposition of azodicarbonamide, used as foaming agent in PVC—plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min−1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g−1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol−1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse.

How to measure healthiness in buildings: Experiences in teaching with BIM tools

Introducing teaching about healthy solutions in buildings and BIM has been a challenge for the University of Alicante. Teaching attached to very tighten study plans conditioned the types of methods that could be used in the past. The worldwide situation of crisis that especially reached Spain and the bursting of the housing bubble generated a lack of employment that reached universities where careers related to construction, Architecture and Architectural Technologist, suffered a huge reduction in the number of students enrolled. In the case of the University of Alicante, students’ enrolment for Architectural Technology reached an 80% reduction. The necessity of a reaction against this situation made the teachers be innovative and use the new Bologna adapted study plans to develop new teaching experiences introducing new concepts: people wellbeing in buildings and BIM. Working with healthy solutions in buildings provided new approaches for building design and construction as an alternative to sustainability. For many years sustainability was the concept that applied to housing gave buildings an added value and the possibility of having viability in a very complex scenario. But after lots of experiences, the approved methodologies for obtaining sustainable housing were ambiguous and at the end, investors, designers, constructors and purchasers cannot find real and validated criteria for obtaining an effective sustainable house. It was the moment to work with new ideas and concepts and start facing buildings from the users’ point of view. At the same time the development of new tools, BIM, has opened a wide range of opportunities, innovative and suggestive, that allows simulation and evaluation of many building factors. This paper describes the research in teaching developed by the University of Alicante to adapt the current study plans, introducing work with healthy solutions in buildings and the use of BIM, with the aim of attracting students by improving their future employability. Pilot experiences have been carried out in different subjects based on the work with projects and case studies under an international frame with the cooperation of different European partner universities. The use of BIM tools, introduced in 2014, solved the problems that appeared in some subjects, mainly building construction, and helped with the evaluation of some healthy concepts that presented difficulties until this moment as knowledge acquired by the students was hard to be evaluated. The introduction of BIM tools: Vasari, FormIt, Revit and Light Control among others, allowed the study of precise healthy concepts and provided the students a real understand of how these different parameters can condition a healthy architectural space. The analysis of the results showed a clear acceptance by the students and gave teachers the possibility of opening new research lines. At the same time, working with BIM tools to obtain healthy solutions in building has been a good option to improve students’ employability as building market in Spain is increasing the number of specialists in BIM with a wider knowledge.

Una aproximación a los instrumentos económicos de las leyes del suelo del 2008 y 2015. ¿Hacia un cambio en el modelo de desarrollo en España?

Tras la aprobación del Real Decreto Legislativo 2/2008 –Ley del Suelo–, nos encontramos ante un modelo territorial y un modelo de desarrollo, que acaba con el arcaico patrón de ciudad dispersa, encontrándose, no obstante, ante las gravísimas consecuencias espaciales generadas por la denominada “burbuja inmobiliaria”, unida a una crisis de consecuencias insospechadas, en el ámbito de la denominada globalización económica, de la que nuestro país no ha logrado sustraerse con Leyes vacías de instrumentos económicos que se han transferido a las Comunidades Autónomas, nos hallamos ante una oportunidad perdida fruto de una no siempre bien calculada descentralización. De este modo, en el presente artículo nos aproximamos a la importancia que muestran los denominados “instrumentos económicos” en la normativa que recoge los pormenores relacionados con el “suelo”, en España, en la primera de nuestras Leyes, la de 1956, en la de 2008 y en el recién aprobado Texto Refundido de la Ley del Suelo y Rehabilitación Urbana –Real Decreto Legislativo 7/2015–, en el ámbito estatal. Para ello, tras definir y valorar los enfoques conceptuales relativos al “suelo” y sus tipologías, se concretan y estudian los instrumentos económicos que se recogen en la Ley del Suelo española y su relación con las nuevas formas de “hacer ciudad”.

Farm-level Capital: Capital positions, structures, the dynamics of farm-level investments, capital accumulation and leverage positions. Factor Markets Working Paper No. 7, October 2011

This Factor Markets Working Paper describes and highlights the key issues of farm capital structures, the dynamics of investments and accumulation of farm capital, and the financial leverage and borrowing rates on farms in selected European countries. Data collected from the Farm Account Data Network (FADN) suggest that the European farming sector uses quite different farm business strategies, capabilities to generate capital revenues, and segmented agricultural loan market regimes. Such diverse business strategies have substantial, and perhaps more substantial than expected, implications for the financial leverage and performance of farms. Different countries adopt different approaches to evaluating agricultural assets, or the agricultural asset markets simply differ substantially depending on the country in question. This has implications for most of the financial indicators. In those countries that have seen rapidly increasing asset prices at the margin, which were revised accordingly in the accounting systems for the whole stock of assets, firm values increased significantly, even though the firms had been disinvesting. If there is an asset price bubble and it bursts, there may be serious knock-on effects for some countries.

(Table 2) Picked maximum velocities from 3 radars (RAY, SHK, and SUM), showing 10 explosions at Erebus volcano, Antarctica, and their respective directivity vectors

We used a novel system of three continuous wave Doppler radars to successfully record the directivity of i) Strombolian explosions from the active lava lake of Erebus volcano, Antarctica, ii) eruptions at Stromboli volcano, Italy, and iii) a man-made explosion in a quarry. Erebus volcano contains a convecting phonolite lava lake, presumably connected to a magma chamber at depth. It is one of the few open vent volcanoes that allow a direct observation of source processes during explosions. Its lava lake is the source of frequent violent Strombolian explosions, caused by large gas bubbles bursting at the lake surface. The exact mechanism of these bubble bursts is unclear, as is the mechanism of the creation of the infrasound signal accompanying the explosions. We use the Doppler radar data to calculate the directivity of Strombolian eruptions at Erebus. This allows us to derive information about the expected type of infrasound source pattern (i.e. the role of a dipole in addition to the monopole signature) and the physical structure of the volcano. We recorded 10 large explosions simultaneously with three radars, enabling us to calculate time series of 3D directivity vectors (i.e. effectively 4D), which describe the direction of preferred expansion of the gas bubble during an explosion. Such directivity information allows a comparison to dipole infrasound radiation patterns recorded during similar explosions only a few weeks later. Video observations of explosions support our interpretation of the measurements. We conclude that at Erebus, the directivity of explosions is mainly controlled by random processes. Since the geometry of the uppermost conduit is assumed to have a large effect on the directivity of explosions, the results suggest a largely symmetrical uppermost conduit with a vertical axis of symmetry. For infrasound recordings, a significant dipole signature can be expected in addition to the predominant monopole signature.