Taxonomy of the Oenocarpus-Jessenia (Palmae) complex in Brazil

Two genera, Oenocarpus and Jessenia are recognized in this complex of Neotropical palms. They are well represented in Brasil, Oenocarpus with seven species (O. distinchus, O. discolar, O. tarampabo, O. bacaba, O. macrocalyx, O. mapora and O. minor, and Jessenia with one species, J. bataua). Many of these taza are poorly know and under-represented in herbaria, both in Brazil and elsewhere. A great deal of fieldwork is needed to betther undestand the basic biology and extent of variation in the populations of these palms.

Coupling organic substrate removal to methane production in a fully biological microbial electrolysis cell

Microbial electrolysis cells (MECs) are an innovative and emerging technique based on the use of solid-state electrodes to stimulate microbial metabolism for wastewater treatment and simultaneous production of value-added compounds (such as methane). This research studied the performance of a two-chamber MEC in terms of organic matter oxidation (at the anode) and methane production (at the cathode). MEC‟s anode had been previously inoculated with an activated sludge, whereas the cathode chamber inoculum was an anaerobic sludge (containing methanogenic microorganisms). During the experimentation, the bioanode was continuously fed with synthetic solutions in anaerobic basal medium, at an organic load rate (OLR) of around 1 g L-1 d-1, referred to the chemical oxygen demand (COD). At the beginning (Run I), the feeding solution contained acetate and subsequently (Run II) it was replaced with a more complex solution containing soluble organic compounds other than acetate. For both conditions, the anode potential was controlled at -0.1 V vs. standard hydrogen electrode, by means of a potentiostat. During Run I, over 80% of the influent acetate was anaerobically oxidized at the anode, and the resulting electric current was recovered as methane at the cathode (with a cathode capture efficiency, CCE, accounting around 115 %). The average energy efficiency of the system (i.e., the energy captured into methane relative to the electrical energy input) under these conditions was over 170%. However, reactor‟s performance decreased over time during this run. Throughout Run II, a substrate oxidation over 60% (on COD basis) was observed. The electric current produced (57% of coulombic efficiency) was also recovered as methane, with a CCE of 90%. For this run the MEC‟s average energy efficiency accounted for almost 170 %. During all the experimentation, a very low biomass growth was observed at the anode whereas ammonium was transferred through the cationic membrane and concentrated at the cathode. Tracer experiments and scanning electron microscopy analyses were also carried out to gain a deeper insight into the reactor performance and also to investigate the possible reasons for partial loss of performance. In conclusion, this research suggests the great potential of MEC to successfully treat low-strength wastewaters, with high energy efficiency and very low sludge production.

Ajustamento pelo risco : da conceptualização à operacionalização

RESUMO - As organizações de saúde, em geral, e os hospitais, em particular, são frequentemente reconhecidos por terem particularidades e especificidades que conferem uma especial complexidade ao seu processo produtivo e à sua gestão (Jacobs, 1974; Butler, 1995). Neste sentido, na literatura hospitalar emergem alguns temas como prioritários tanto na investigação como na avaliação do seu funcionamento, nomeadamente os relacionados com a produção, com o financiamento, com a qualidade, com a eficiência e com a avaliação do seu desempenho. O estado da arte da avaliação do desempenho das organizações de saúde parece seguir a trilogia definida por Donabedian (1985) — Estrutura, Processo e Resultados. Existem diversas perspectivas para a avaliação do desempenho na óptica dos Resultados — efectividade, eficiência ou desempenho financeiro. No entanto, qualquer que seja a utilizada, o ajustamento pelo risco é necessário para se avaliar a actividade das organizações de saúde, como forma de medir as características dos doentes que podem influenciar os resultados de saúde. Como possíveis indicadores de resultados, existem a mortalidade (resultados finais), as complicações e as readmissões (resultados intermédios). Com excepção dos estudos realizados por Thomas (1996) e Thomas e Hofer (1998 e 1999), praticamente ninguém contesta a relação entre estes indicadores e a efectividade dos cuidados. Chamando, no entanto, a atenção para a necessidade de se definirem modelos de ajustamento pelo risco e ainda para algumas dificuldades conceptuais e operacionais para se atingir este objectivo. Em relação à eficiência técnica dos hospitais, os indicadores tradicionalmente mais utilizados para a sua avaliação são os custos médios e a demora média. Também neste domínio, a grande maioria dos estudos aponta para que a gravidade aumenta o poder justificativo do consumo de recursos e que o ajustamento pelo risco é útil para avaliar a eficiência dos hospitais. Em relação aos sistemas usados para medir a severidade e, consequentemente, ajustar pelo risco, o seu desenvolvimento apresenta, na generalidade, dois tipos de preocupações: a definição dos suportes de recolha da informação e a definição dos momentos de medição. Em última instância, o dilema que se coloca reside na definição de prioridades e daquilo que se pretende sacrificar. Quando se entende que os aspectos financeiros são determinantes, então será natural que se privilegie o recurso quase exclusivo a elementos dos resumos de alta como suporte de recolha da informação. Quando se defende que a validade de construção e de conteúdo é um aspecto a preservar, então o recurso aos elementos dos processos clínicos é inevitável. A definição dos momentos de medição dos dados tem repercussões em dois níveis de análise: na neutralidade económica do sistema e na prospectividade do sistema. O impacto destas questões na avaliação da efectividade e da eficiência dos hospitais não é uma questão pacífica, visto que existem autores que defendem a utilização de modelos baseados nos resumos de alta, enquanto outros defendem a supremacia dos modelos baseados nos dados dos processos clínicos, para finalmente outros argumentarem que a utilização de uns ou outros é indiferente, pelo que o processo de escolha deve obedecer a critérios mais pragmáticos, como a sua exequibilidade e os respectivos custos de implementação e de exploração. Em relação às possibilidades que neste momento se colocam em Portugal para a utilização e aplicação de sistemas de ajustamento pelo risco, verifica-se que é praticamente impossível a curto prazo aplicar modelos com base em dados clínicos. Esta opção não deve impedir que a médio prazo se altere o sistema de informação dos hospitais, de forma a considerar a eventualidade de se utilizarem estes modelos. Existem diversos problemas quando se pretendem aplicar sistemas de ajustamento de risco a populações diferentes ou a subgrupos distintos das populações donde o sistema foi originalmente construído, existindo a necessidade de verificar o ajustamento do modelo à população em questão, em função da sua calibração e discriminação.

LAGO AMAZONAS: FACT OR FANCY?

It has been suggested that a huge lake, Lago Amazonas, covered a large part of the Amazon basin until as recently as two thousand years ago. According to this hypothesis, the topmost sediments in western Amazonia are almost universally young deposite of lacustrine and deltaic origin. The hypothesis has gained some attention among biologists because of its implications for biological phenomena in Amazonia, especially biogeography and biodiversity. According to the available geological data, however, Amazonia is geologically far more complex than assumed by the lake hypothesis. In the following discussion we will point out the weaknesses of the Lago Amazonas hypothesis, and indicate alternative explanations of the surface geology that are based on tectonically controlled fluvial deposition.

Detection of road accident accumulation zones with a visual analytics approach

Nowadays, road accidents are a major public health problem, which increase is forecasted if road safety is not treated properly, dying about 1.2 million people every year around the globe. In 2012, Portugal recorded 573 fatalities in road accidents, on site, revealing the largest decreasing of the European Union for 2011, along with Denmark. Beyond the impact caused by fatalities, it was calculated that the economic and social costs of road accidents weighted about 1.17% of the Portuguese gross domestic product in 2010. Visual Analytics allows the combination of data analysis techniques with interactive visualizations, which facilitates the process of knowledge discovery in sets of large and complex data, while the Geovisual Analytics facilitates the exploration of space-time data through maps with different variables and parameters that are under analysis. In Portugal, the identification of road accident accumulation zones, in this work named black spots, has been restricted to annual fixed windows. In this work, it is presented a dynamic approach based on Visual Analytics techniques that is able to identify the displacement of black spots on sliding windows of 12 months. Moreover, with the use of different parameterizations in the formula usually used to detect black spots, it is possible to identify zones that are almost becoming black spots. Through the proposed visualizations, the study and identification of countermeasures to this social and economic problem can gain new grounds and thus the decision- making process is supported and improved.

Integrated management systems as complex adaptive systems

It is a difficult task to avoid the “smart systems” topic when discussing smart prevention and, similarly, it is a difficult task to address smart systems without focusing their ability to learn. Following the same line of thought, in the current reality, it seems a Herculean task (or an irreparable omission) to approach the topic of certified occupational health and safety management systems (OHSMS) without discussing the integrated management systems (IMSs). The available data suggest that seldom are the OHSMS operating as the single management system (MS) in a company so, any statement concerning OHSMS should mainly be interpreted from an integrated perspective. A major distinction between generic systems can be drawn between those that learn, i.e., those systems that have “memory” and those that have not. These former systems are often depicted as adaptive since they take into account past events to deal with novel, similar and future events modifying their structure to enable success in its environment. Often, these systems, present a nonlinear behavior and a huge uncertainty related to the forecasting of some events. This paper seeks to portray, for the first time as we were able to find out, the IMSs as complex adaptive systems (CASs) by listing their properties and dissecting the features that enable them to evolve and self-organize in order to, holistically, fulfil the requirements from different stakeholders and thus thrive by assuring the successful sustainability of a company. Based on the revision of literature carried out, this is the first time that IMSs are pointed out as CASs which may develop fruitful synergies both for the MSs and for CASs communities. By performing a thorough revision of literature and based on some concepts embedded in the “DNA” of the subsystems implementation standards it is intended, specifically, to identify, determine and discuss the properties of a generic IMS that should be considered to classify it as a CAS.

Conceptual-physical bridging – From BPMN models to physical implementations on kettle

Developing and implementing data-oriented workflows for data migration processes are complex tasks involving several problems related to the integration of data coming from different schemas. Usually, they involve very specific requirements - every process is almost unique. Having a way to abstract their representation will help us to better understand and validate them with business users, which is a crucial step for requirements validation. In this demo we present an approach that provides a way to enrich incrementally conceptual models in order to support an automatic way for producing their correspondent physical implementation. In this demo we will show how B2K (Business to Kettle) system works transforming BPMN 2.0 conceptual models into Kettle data-integration executable processes, approaching the most relevant aspects related to model design and enrichment, model to system transformation, and system execution.

Using the GPU to design complex profile extrusion dies

In the present work the benefits of using graphics processing units (GPU) to aid the design of complex geometry profile extrusion dies, are studied. For that purpose, a3Dfinite volume based code that employs unstructured meshes to solve and couple the continuity, momentum and energy conservation equations governing the fluid flow, together with aconstitutive equation, was used. To evaluate the possibility of reducing the calculation time spent on the numerical calculations, the numerical code was parallelized in the GPU, using asimple programing approach without complex memory manipulations. For verificationpurposes, simulations were performed for three benchmark problems: Poiseuille flow, lid-driven cavity flow and flow around acylinder. Subsequently, the code was used on the design of two real life extrusion dies for the production of a medical catheter and a wood plastic composite decking profile. To evaluate the benefits, the results obtained with the GPU parallelized code were compared, in terms of speedup, with a serial implementation of the same code, that traditionally runs on the central processing unit (CPU). The results obtained show that, even with the simple parallelization approach employed, it was possible to obtain a significant reduction of the computation times.

Methanogens, sulphate and heavy metals: a complex system

Anaerobic digestion (AD) is a well-established technology used for the treatment of wastes and wastewaters with high organic content. During AD organic matter is converted stepwise to methane-containing biogasa renewable energy carrier. Methane production occurs in the last AD step and relies on methanogens, which are rather sensitive to some contaminants commonly found in wastewaters (e.g. heavy metals), or easily outcompeted by other groups of microorganisms (e.g. sulphate reducing bacteria, SRB). This review gives an overview of previous research and pilot-scale studies that shed some light on the effects of sulphate and heavy metals on methanogenesis. Despite the numerous studies on this subject, comparison is not always possible due to differences in the experimental conditions used and parameters explained. An overview of the possible benefits of methanogens and SRB co-habitation is also covered. Small amounts of sulphide produced by SRB can precipitate with metals, neutralising the negative effects of sulphide accumulation and free heavy metals on methanogenesis. Knowledge on how to untangle and balance sulphate reduction and methanogenesis is crucial to take advantage of the potential for the utilisation of biogenic sulphide as a metal detoxification agent with minimal loss in methane production in anaerobic digesters.

Development of a new 3D OpenFOAM® solver to model the cooling stage in profile extrusion

[Excerpt] The advantages resulting from the use of numerical modelling tools to support the design of processing equipment are almost consensual. The design of calibration systems in profile extrusion is not an exception . H owever , the complex geome tries and heat exchange phenomena involved in this process require the use of numerical solvers able to model the heat exchange in more than one domain ( calibrator and polymer), the compatibilization of the heat transfer at the profile - calibrator interface and with the ability to deal with complex geometries. The combination of all these features is usually hard to find in commercial software. Moreover , the dimension of the meshes required to ob tain accurate results, result in computational times prohibitive for industrial application. (...)

Using OpenFOAM to aid the design of complex profile extrusion dies

[Extrat] Thermoplastic profiles are very attractive due to their inherent design freedom. However, the usual methodologies employed to design extrusion forming tools, based on experimental based trial–and–error procedures, are highly dependent on the designer’s experience and lead to high resources consumption. Despite of the relatively low cost of the raw materials employed on the production of this type of profiles, the resources involved in the die design process significantly increase their cost. These difficulties are even more evident when a complex geometry profile has to be produced and there is no previous experience with similar geometries. Therefore, novel design approaches are required, in order to reduce the required resources and guarantee a good performance for the produced profile. (...)

Perceções dos alunos e fatores de influência sobre a escolha da Contabilidade como área de estudo

Dissertação de mestrado em Contabilidade

Patterns of Mycobacterium tuberculosis-complex excretion and characterization of super-shedders in naturally-infected wild boar and red deer

Wild boar (Sus scrofa) and red deer (Cervus elaphus) are the main maintenance hosts for bovine tuberculosis (bTB) in continental Europe. Understanding Mycobacterium tuberculosis complex (MTC) excretion routes is crucial to define strategies to control bTB in free-ranging populations, nevertheless available information is scarce. Aiming at filling this gap, four different MTC excretion routes (oronasal, bronchial-alveolar, fecal and urinary) were investigated by molecular methods in naturally infected hunter-harvested wild boar and red deer. In addition MTC concentrations were estimated by the Most Probable Number method. MTC DNA was amplified in all types of excretion routes. MTC DNA was amplified in at least one excretion route from 83.0% (CI95 70.8-90.8) of wild ungulates with bTB-like lesions. Oronasal or bronchial-alveolar shedding were detected with higher frequency than fecal shedding (p < 0.001). The majority of shedders yielded MTC concentrations <10(3) CFU/g or mL. However, from those ungulates from which oronasal, bronchial-alveolar and fecal samples were available, 28.2% of wild boar (CI95 16.6-43.8) and 35.7% of red deer (CI95 16.3-61.2) yielded MTC concentrations >10(3) CFU/g or mL (referred here as super-shedders). Red deer have a significantly higher risk of being super-shedders compared to wild boar (OR = 11.8, CI95 2.3-60.2). The existence of super-shedders among the naturally infected population of wild boar and red deer is thus reported here for the first time and MTC DNA concentrations greater than the minimum infective doses were estimated in excretion samples from both species.

Widespread environmental contamination with Mycobacterium tuberculosis complex revealed by a molecular detection protocol

Environmental contamination with Mycobacterium tuberculosis complex (MTC) has been considered crucial for bovine tuberculosis persistence in multi-host-pathogen systems. However, MTC contamination has been difficult to detect due to methodological issues. In an attempt to overcome this limitation we developed an improved protocol for the detection of MTC DNA. MTC DNA concentration was estimated by the Most Probable Number (MPN) method. Making use of this protocol we showed that MTC contamination is widespread in different types of environmental samples from the Iberian Peninsula, which supports indirect transmission as a contributing mechanism for the maintenance of bovine tuberculosis in this multi-host-pathogen system. The proportion of MTC DNA positive samples was higher in the bovine tuberculosis-infected than in presumed negative area (0.32 and 0.18, respectively). Detection varied with the type of environmental sample and was more frequent in sediment from dams and less frequent in water also from dams (0.22 and 0.05, respectively). The proportion of MTC-positive samples was significantly higher in spring (p<0.001), but MTC DNA concentration per sample was higher in autumn and lower in summer. The average MTC DNA concentration in positive samples was 0.82 MPN/g (CI95 0.70-0.98 MPN/g). We were further able to amplify a DNA sequence specific of Mycobacterium bovis/caprae in 4 environmental samples from the bTB-infected area.

Modelação de governo electrónico para países emergentes: O caso de São Tomé e Príncipe

Tese de Doutoramento em Tecnologias e Sistemas de Informação