Using cognitive load theory to interpret student difficulties with a problem-based learning approach to engineering education:a case study

This article reports on an investigationwith first year undergraduate ProductDesign and Management students within a School of Engineering and Applied Science. The students at the time of this investigation had studied fundamental engineering science and mathematics for one semester. The students were given an open ended, ill-formed problem which involved designing a simple bridge to cross a river.They were given a talk on problemsolving and given a rubric to follow, if they chose to do so.They were not given any formulae or procedures needed in order to resolve the problem. In theory, they possessed the knowledge to ask the right questions in order tomake assumptions but, in practice, it turned out they were unable to link their a priori knowledge to resolve this problem. They were able to solve simple beam problems when given closed questions. The results show they were unable to visualize a simple bridge as an augmented beam problem and ask pertinent questions and hence formulate appropriate assumptions in order to offer resolutions.

Experiences on dynamic simulation software in chemical engineering education

Commercial process simulators are increasing interest in the chemical engineer education. In this paper, the use of commercial dynamic simulation software, D-SPICE® and K-Spice®, for three different chemical engineering courses is described and discussed. The courses cover the following topics: basic chemical engineering, operability and safety analysis and process control. User experiences from both teachers and students are presented. The benefits of dynamic simulation as an additional teaching tool are discussed and summarized. The experiences confirm that commercial dynamic simulators provide realistic training and can be successfully integrated into undergraduate and graduate teaching, laboratory courses and research. © 2012 The Institution of Chemical Engineers.

Discover the Thracians - An Approach for Use of 2D and 3D Technologies for Digitization of Cultural Heritage in the Field of E-learning

Information and communication technologies (ICT) offer an easier access to and a multi-perspective view of cultural heritage artifacts and may also enrich and improve cultural heritage education through the adoption of innovative learning/teaching methods. This paper examines the different practices and opportunities for digitization of cultural artifacts with historical significance and describes the work on a pilot project concerning the development of e-learning materials in the Thracian cultural and historical heritage. The proposed method presents an approach based on a combination of 2D and 3D technologies to facilitate the overall process of digitization of individual objects. This approach not only provides greater opportunities for presenting the Thracian heritage but also new perspectives for studying it - students, scientists, PhD students will have the opportunity to work with the materials without having access to them.

E-blogspot in the teaching of strategic management

E-learning and e-learning applications/tools are available to all educators thanks to the evolution of technology and the internet. Although a great variety of technologies are available it is not always obvious how these can be integrated in traditional teaching to support and enhance the learning experience. The majority of the existing literature proposes the use of blogging as an activity that students should do in order to increase their active participation in learning. This article presents the use of blogspots in the teaching of Strategic Management as a tool used to create greater linkages between theory and practice, discussing the evolution of its utilisation in my modules, the current state of use and a series of reflections on experience gained from its use so far. Overall, I have found that there is limited literature on how blogging could link to teaching activities and its utilisation should be viewed as learning by doing which is evaluated and improved by critical reflection of the user.

Practice based learning for automotive engineering design students

The automotive industry combines a multitude of professionals to develop a modern car successfully. Within the design and development teams the collaboration and interface between Engineers and Designers is critical to ensure design intent is communicated and maintained throughout the development process. This study highlights recent industry practice with the emergence of Concept Engineers in design teams at Jaguar Land Rover Automotive group. The role of the Concept Engineer emphasises the importance of the Engineering and Design/Styling interface with the Concept engineer able to interact and understand the challenges and specific languages of each specialist area, hence improving efficiency and communication within the design team. Automotive education tends to approach design from two distinct directions, that of engineering design through BSc courses or a more styling design approach through BA and BDes routes. The educational challenge for both types of course is to develop engineers and stylist's who have greater understanding and experience of each other's specialist perspective of design and development. The study gives examples of two such courses in the UK who are developing programmes to help students widen their understanding of the engineering and design spectrum. Initial results suggest the practical approach has been well received by students and encouraged by industry as they seek graduates with specialist knowledge but also a wider appreciation of their role within the design process.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

Teaching economics in Hungary after the crisis

In the wake of the economic crisis, a question arises increasingly often: what is the role of economic culture in overcoming the crisis? Since the mid-2000s, leaders of developed countries have kept pointing out that fostering political and economic education is a driver of growth and development. Curricula are being overhauled; new modules are appearing in the study programmes of secondary schools, colleges, and university-level undergraduate courses; significant curriculum developments have been launched at the world’s leading universities in the last few years. Hungarian higher education cannot exclude itself from this process.

An analysis of the on-time graduation rate in the two-year program at National Taipei Institute of Technology in Taiwan

Taiwan's technical vocational educational system includes three levels: (1) institutes of technology (two and four year programs), (2) junior colleges (two, three and five year programs), and (3) senior vocational schools. Two-year junior colleges enroll their students through two channels: (1) based on results of the Particular Screening Entrance Examination (PSEE), (2) based on the Joint College Entrance Examination (JCEE). The PSEE has two categories: Category I includes on-time graduates with excellent performance, which means that they are within the top ten of their classes; Category II students include award-winning students in talent contests who have achieved a minimum grade point average of 75%. The JCEE is a regular entrance examination given to any senior vocation school graduate.^ Basic courses have a great impact on the students' academic performance. The purpose of the study was to focus on the effectiveness of teaching mathematics in two-year junior colleges and to analyze and correlate the results of two-year junior college students' performance in calculus and on-time graduation. The target group consisted of 521 students enrolled at National Taipei Institute of Technology in 1993.^ Calculus is a very important course for engineering majors in two-year junior colleges and has a great impact on the students' academic performance. This retrospective study showed that there was a correlation between students' performance in calculus and on-time graduation after two years of study.^ The conclusions of the study urge the Ministry of Education to reform two-year junior college curriculum standards to emphasize basic rudimentary courses. It is recommended that engineering majors receive three hours of calculus per week as the current requirement of only two hours per week is inadequate. The future job market will require a technologically advanced labor force that can be trained in a higher education system. More channels of higher education for two-year junior college graduates should be made available for those wishing to pursue bachelor degrees. Additional work in calculus will not only enhance the opportunities for two-year junior college graduates to continue their pursuit of an advanced academic degree, but also serve them well as they seek career advancement. ^

Self -regulated learning: The role of a journal in the learning process for students and teachers

A fundamental goal of education is to equip students with self-regulatory capabilities that enable them to educate themselves. Self directedness not only contributes to success in formal instruction but also promotes lifelong learning (Bandura, 1997). The area of research on self-regulated learning is well grounded within the framework of psychological literature attributed to motivation, metacognition, strategy use and learning. This study explored past research and established the purpose of teaching students to self-regulate their learning and highlighted the fact that teachers are expected to assume a major role in the learning process. A student reflective writing journal activity was sustained for a period of two semesters in two fourth-grade mathematics classrooms. The reflective writing journal was analyzed in search of identifying strategies reported by students. Research questions were analyzed using descriptive statistics, frequency counts, cross-tabs and chi-square analyses. ^ Results based on student-use of the journals and teacher interviews indicated that the use of a reflective writing journal does promote self-regulated learning strategies to the extent which the student is engaged in the journaling process. Those students identified as highly self-regulated learners on the basis of their strategy use, were shown to consistently claim to learn math “as well or better than planned” on a weekly basis. Furthermore, good self-regulators were able to recognize specific strategies that helped them do well and change their strategies across time based on the planned learning objectives. The perspectives of the participating teachers were examined in order to establish the context in which the students were working. The effect of “planned change” and/or the resistance to change as established in previous research, from the teachers point of view, was also explored. The analysis of the journal data did establish a significant difference between students who utilized homework as a strategy. ^ Based on the journals and interviews, this study finds that the systematic use of metacognitive, motivational and/or learning strategies can have a positive effect on student's responsiveness to their learning environment. Furthermore, it reflects that teaching students “how to learn” can be a vital part of the effectiveness of any curriculum. ^

Inclusive pedagogy : from learning to action. Supporting each individual in the context of 'everybody'

Peer reviewed

Inclusive pedagogy : from learning to action. Supporting each individual in the context of 'everybody'

Peer reviewed

Mitigating Social Risk in the Extractive Sector: Developing Intercultural Competence as a Tool for Negotiating Western-Indigenous Perspectives within the Undergraduate Mining Engineering Curriculum

Drawing upon critical, communications, and educational theories, this thesis develops a novel framing of the problem of social risk in the extractive sector, as it relates to the building of respectful relationships with indigenous peoples. Building upon Bakhtin’s dialogism, the thesis demonstrates the linkage of this aspect of social risk to professional education, and specifically, to the undergraduate mining engineering curriculum, and develops a framework for the development of skills related to intercultural competence in the education of mining engineers. The knowledge of social risk, as well as the level of intercultural competence, of students in the mining engineering program, is investigated through a mixture of surveys and focus groups – as is the impact of specific learning interventions. One aspect of this investigation is whether development of these attributes alters graduates’ conception of their identity as mining engineers, i.e. the range and scope of responsibilities, and understanding of to whom responsibilities are owed, and their role in building trusting relationships with communities. Survey results demonstrate that student openness to the perspectives of other cultures increases with exposure to the second year curriculum. Students became more knowledgeable about social dimensions of responsible mining, but not about cultural dimensions. Analysis of focus group data shows that students are highly motivated to improve community perspectives and acceptance. It is observed that students want to show respect for diverse peoples and communities where they will work, but they are hampered by their inability to appreciate the viewpoints of people who do not share their values. They embrace benefit sharing and environmental protection as norms, but they mistakenly conclude that opposition to mining is rooted in a lack of education rather than in cultural values. Three, sequential, threshold concepts are identified as impeding development of intercultural competence: Awareness and Acknowledgement of Different Forms of Knowledge; Recognition that Value Systems are a Function of Culture; Respect for varied perceptions of Social Wellbeing and Quality of Life. Future curriculum development in the undergraduate mining engineering program, as well as in other educational programs relevant to the extractive sector, can be effectively targeted by focusing on these threshold concepts.

Language Teaching Methodologies, Intercultural Awareness and Autonomous Learning

This paper will examine familiar reasons for including the teaching of intercultural competence within Language Teaching before adding some less familiar ones. It will focus in particular on the question of how far intercultural competence can be learned when students are formally studying languages and how far such competence needs to be acquired autono-mously. It will though also ask to what extent being initiated to the very varied facets of in-tercultural competence during formal language study plays an important role in allowing ef-fective autonomous acquisition to take place. The paper will conclude that a significant part of the intercultural development that students need to undertake if they are to be able to communicate effectively in a foreign language must happen autonomously, but that it is, nonetheless, vital that language courses at least sow the seeds of intercultural learning in ways that will facilitate autonomous learning. As such, language courses, if they are genuinely to meet student needs, should incorporate elements of intercultural training. The paper also concludes by outlining the type of empirical research that would need to be carried out for these claims to be fully substantiated.

Interactive Learning in Library Inductions at University for the Creative Arts

Large group library inductions in a lecture theatre at the beginning of term are considered to be one of the more challenging scenarios for delivery. This article describes an activity in which students in groups of 30-90 are introduced to the library and its resources, using an activity to engage them and to connect their ideas with the content presented. The work of several educational theorists embodied in the activity is then described. The session was conceived as a collaboration between the Learning and Teaching Librarian and the Learning Development Tutor, who is responsible for supporting students with their reading, writing and critical skills. This work was done at University for the Creative Arts, where the author formerly held post as Learning and teaching Librarian.

Cooperative or collaborative learning: Is there a difference in university students’ perceptions?

The hypothesis that the same educational objective, raised as cooperative or collaborative learning in university teaching does not affect students’ perceptions of the learning model, leads this study. It analyses the reflections of two students groups of engineering that shared the same educational goals implemented through two different methodological active learning strategies: Simulation as cooperative learning strategy and Problem-based Learning as a collaborative one. The different number of participants per group (eighty-five and sixty-five, respectively) as well as the use of two active learning strategies, either collaborative or cooperative, did not show differences in the results from a qualitative perspective.