Vocational education and training in schools : career advisers' perceptions and practices

This paper explores the currently highly topical issue of Vocational Education and Training in Schools (VETiS). Specifically, it focuses upon career advisers' perceptions of VETiS, their advising practices as pertaining to this program and their views of others' perceptions of VETiS. It draws upon a national research project and data derived from interviews conducted with career advisers during the course of the project. The paper demonstrates that career advisers perceive VETiS in a favorable light on the whole, and they advocate the practice of advising all students to do VETiS if students desire to do so. That said, the paper goes on to highlight tensions apparent in the career advisers' perceptions of, and subsequent advice-giving practices regarding VETiS - particularly in terms of the potential benefits it affords all students. It becomes clear that careers advisers have different agendas for advising different students - academic and non-academic students - to undertake VETiS as a course of study. Finally, the paper demonstrates the ways in which career advisers become complicit in the marginalisation of VETiS programs and the status of VET.

The effect of various pH, ionic strength and temperature on papain hydrolysis of salivary film

Stimulated human whole saliva (WS) was used to study the dynamics of papain hydrolysis at defined pH, ionic strength and temperature with the view of reducing an acquired pellicle. A quartz crystal microbalance with dissipation (QCM-D) was used to monitor the changes in frequency due to enzyme hydrolysis of WS films and the hydrolytic parameters were calculated using an empirical model. The morphological and conformational changes of the salivary films before and after enzymatic hydrolysis were characterized by atomic force microscopy (AFM) imaging and grazing angle infrared spectroscopy (GA-FTIR) spectra, respectively. The characteristics of papain hydrolysis of WS films were pH-, ionic strength- and temperature-dependent. The WS films were partially removed by the action of enzyme, resulting thinner and smoother surfaces. The IR data suggested that hydrolysis-induced deformation did not occur onto the remnants salivary films. The processes of papain hydrolysis of WS films can be controlled by properly regulating pH, ionic strength and temperature.

Can transfer of learning be enriched by valuing knowledge transformation and co-creation? Exploring new ways to improve training design

This paper argues that a possible cause of issues with management education outcomes is the fact that most training models operate from a limited ‘transfer’ metaphor. This theoretical paper contends that by reconceptualising existing models, specifically Holton’s transfer of learning model, to incorporate multiple processes and acknowledge the importance of educator- or trainer-student interaction in co-creating knowledge, there is potential to improve training design and ultimately achieve more satisfactory training outcomes.

Design and implementation of a virtual world training simulation of ICU first hour handover processes

Nursing training for an Intensive Care Unit (ICU) is a resource intensive process. High demands are made on staff, students and physical resources. Interactive, 3D computer simulations, known as virtual worlds, are increasingly being used to supplement training regimes in the health sciences; especially in areas such as complex hospital ward processes. Such worlds have been found to be very useful in maximising the utilisation of training resources. Our aim is to design and develop a novel virtual world application for teaching and training Intensive Care nurses in the approach and method for shift handover, to provide an independent, but rigorous approach to teaching these important skills. In this paper we present a virtual world simulator for students to practice key steps in handing over the 24/7 care requirements of intensive care patients during the commencing first hour of a shift. We describe the modelling process to provide a convincing interactive simulation of the handover steps involved. The virtual world provides a practice tool for students to test their analytical skills with scenarios previously provided by simple physical simulations, and live on the job training. Additional educational benefits include facilitation of remote learning, high flexibility in study hours and the automatic recording of a reviewable log from the session. To the best of our knowledge, we believe this is a novel and original application of virtual worlds to an ICU handover process. The major outcome of the work was a virtual world environment for training nurses in the shift handover process, designed and developed for use by postgraduate nurses in training.

The development and implementation of the Promoting Resilient Officers (PRO) Program

This article describes the rationale, developmental process, and content of a resilience-building program that has been implemented with new recruits to a police academy. The process of extensive consultation with the police service (consistent with community-based participatory research principles) has helped to provide a sustainable and pragmatic program framework. The Promoting Resilient Officers (PRO) program is a seven-session strength-based program that integrates CBT and interpersonal perspectives within a salutogenic paradigm. PRO also includes two “refresher” sessions delivered online up to 18 months post the initial face-to-face sessions. PRO was delivered with high fidelity as an integral part of police recruit training and made sustainable by using psychologists within the police service to deliver the intervention. Implementation incorporated a Randomized Controlled design by which a rigorous evaluation of program effectiveness is being conducted. Initial data presented indicates a high level of engagement and acceptability of the PRO program.

Outdoor experiential training as a medium for the development of today’s leaders

Outdoor experiential training is often used for the enhancement of generalised workplace skills including those considered relevant for effective leadership. Traditionally, facilitation processes and strategies employed in outdoor experiential training have often relied on theories delivered as part of an outdoor leadership training program. This was premised on the assumption that skills and capabilities developed in such programs transfer to the mainstream business market. In this paper we present data from an International study on the characteristics of outdoor education professionals that adds further insights into the role that outdoor experiential training plays in the development of generic leadership characteristics. Outdoor leaders were found to characterise transformational leadership qualities and considered that the development of these qualities were directly linked to their outdoor experiential training.

New design rules for the shear strength of LiteSteel Beams

Abstract: The LiteSteel Beam (LSB) is a new cold-formed hollow flange channel section produced using dual electric resistance welding and automated continuous roll-forming technologies. The innovative LSB sections have many beneficial characteristics and are commonly used as flexural members in building construction. However, limited research has been undertaken on the shear behaviour of LSBs. Therefore a detailed investigation including both numerical and experimental studies was undertaken to investigate the shear behaviour of LSBs. Finite element models of LSBs in shear were developed to simulate the nonlinear ultimate strength behaviour of LSBs including their elastic buckling characteristics, and were validated by comparing their results with experimental test results. Validated finite element models were then used in a detailed parametric study into the shear behaviour of LSBs. The parametric study results showed that the current design rules in cold-formed steel structures design codes are very conservative for the shear design of LSBs. Significant improvements to web shear buckling occurred due to the presence of torsionally rigid rectangular hollow flanges while considerable post-buckling strength was also observed. This paper therefore proposes improved shear strength design rules for LSBs within the current cold-formed steel code guidelines. It presents the details of the parametric study and the new shear strength equations. The new equations were also developed based on the direct strength method. The proposed shear strength equations have the potential to be used with other conventional cold-formed steel sections such as lipped channel sections.

New design rules for the shear strength of LiteSteel Beams with web openings

Abstract: LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. The LSBs are commonly used as floor joists and bearers with web openings in residential, industrial and commercial buildings. Their shear strengths are considerably reduced when web openings are included for the purpose of locating building services. However, no research has been undertaken on the shear behaviour and strength of LSBs with web openings. Therefore experimental and numerical studies were undertaken to investigate the shear behaviour and strength of LSBs with web openings. In this research, finite element models of LSBs with web openings in shear were developed to simulate the shear behaviour and strength of LSBs including their buckling characteristics. They were then validated by comparing their results with available experimental test results and used in a detailed parametric study. The results showed that the current design rules in cold-formed steel structures design codes are very conservative for the shear design of LSBs with web openings. Improved design equations have been proposed for the shear capacity of LSBs with web openings based on both experimental and parametric study results. An alternative shear design method based on an equivalent reduced web thickness was also proposed. It was found that the same shear strength design rules developed for LSBs without web openings can be used for LSBs with web openings provided the equivalent reduced web thickness equation developed in this paper is used. This is a significant advancement as it simplifies the shear design methods of LSBs with web openings considerably.

Shear behaviour and strength of LiteSteel Beams with web openings

Abstract: The LiteSteel Beam (LSB) is a new cold-formed steel hollow flange channel beam recently developed in Australia. It is commonly used as a floor joist or bearer in buildings. Current practice in flooring systems is to include openings in the web element of floor joists or bearers so that building services can be located within them. Shear behaviour of LSBs with web openings is more complicated while their shear strengths are considerably reduced by the presence of web openings. However, no research has been undertaken on the shear behaviour and strength of LSBs with web openings. Therefore a detailed experimental study involving 26 shear tests was undertaken on simply supported LSB test specimens with web openings and an aspect ratio of 1.5. This paper presents the details of this experimental study and the results of their shear capacities and behavioural characteristics. Experimental results showed that the current design rules in cold-formed steel structures design codes are very conservative for the shear design of LSBs with web openings. Improved design equations have been proposed for the shear strength of LSBs with web openings based on the experimental results from this study.

Strengthening the role of the adult education sector in training workers for the digital content industries in Australia and Singapore

In 2009, QUT’s Office of Research and the Institute for Adult Learning Singapore funded a six-month pilot project that represented the first stage of a larger international comparative study. The study is the first of its kind to investigate to what extent and how digital content workers’ learning needs are being met by adult education and training in Australia and Singapore. The pilot project involved consolidating key theoretical literature, studies, policies, programs and statistical data relevant to the digital content industries in Australia and Singapore. This had not been done before, and represented new knowledge generation. Digital content workers include professionals within and beyond the creative industries as follows: Visual effects and animation (including virtual reality and 3D products); Interactive multimedia (e.g. websites, CD-ROMs) and software development; Computer and online games; and Digital film & TV production and film & TV post-production. In the last decade, the digital content industries have been recognised as an industry sector of strong and increasing significance. The project compared Australia and Singapore on aspects of the digital content industries’ labour market, skill requirements, human capital challenges, the role of adult education in building a workforce for the digital content industries, and innovation policies. The consolidated report generated from the project formed the basis of the proposal for an ARC Linkage Project application submitted in the May 2010 round.

Evaluation of an Australian solar community : implications for education and training

1.1 Background What is renewable energy education and training? A cursory exploration of the International Solar Energy Society website (www.ises.org) reveals numerous references to education and training, referring collectively to concepts of the transfer and exchange of information and good practices, awareness raising and skills development. The purposes of such education and training relate to changing policy, stimulating industry, improving quality control and promoting the wider use of renewable energy sources. The primary objective appears to be to accelerate a transition to a better world for everyone (ISEE), as the greater use of renewable energy is seen as key to climate recovery; world poverty alleviation; advances in energy security, access and equality; improved human and environmental health; and a stabilized society. The Solar Cities project – Habitats of Tomorrow – aims at promoting the greater use of renewable energy within the context of long term planning for sustainable urban development. The focus is on cities or communities as complete systems; each one a unique laboratory allowing for the study of urban sustainability within the context of a low carbon lifestyle. The purpose of this paper is to report on an evaluation of a Solar Community in Australia, focusing specifically on the implications (i) for our understandings and practices in renewable energy education and training and (ii) for sustainability outcomes. 1.2 Methodology The physical context is a residential Ecovillage (a Solar Community) in sub-tropical Queensland, Australia (latitude 28o south). An extensive Architectural and Landscape Code (A&LC) ‘premised on the interconnectedness of all things’ and embracing ‘both local and global concerns’ governs the design and construction of housing in the estate: all houses are constructed off-ground (i.e. on stumps or stilts) and incorporate a hybrid approach to the building envelope (mixed use of thermal mass and light-weight materials). Passive solar design, gas boosted solar water heaters and a minimum 1kWp photovoltaic system (grid connected) are all mandatory, whilst high energy use appliances such as air conditioners and clothes driers are not permitted. Eight families participated in an extended case study that encompassed both quantitative and qualitative approaches to better understand sustainable housing (perceived as a single complex technology) through its phases of design, construction and occupation. 1.3 Results The results revealed that the level of sustainability (i.e. the performance outcomes in terms of a low-carbon lifestyle) was impacted on by numerous ‘players’ in the supply chain, such as architects, engineers and subcontractors, the housing market, the developer, product manufacturers / suppliers / installers and regulators. Three key factors were complicit in the level of success: (i) systems thinking; (ii) informed decision making; and (iii) environmental ethics and business practices. 1.4 Discussion The experiences of these families bring into question our understandings and practices with regard to education and training. Whilst increasing and transferring knowledge and skills is essential, the results appear to indicate that there is a strong need for expanding our education efforts to incorporate foundational skills in complex systems and decision making processes, combined with an understanding of how our individual and collective values and beliefs impact on these systems and processes.

Training the public to collect oral histories of our community : the OHAA Queensland Chapter’s model

In a digital age, the skills required to undertake an oral history project have changed dramatically. For community groups, this shift can be new and exciting, but can also invoke feelings of anxiety when there is a gap in the skill set. Addressing this gap is one of Oral History Association of Australia, Queensland (OHAA Qld) main activities. This paper reports on the OHAA Qld chapter’s oral history workshop program, which was radically altered in 2011.

Assisting ICU training management with virtual worlds

Conventional training methods for nurses involve many physical factors that place limits on potential class sizes. Alternate training methods with lower physical requirements may support larger class sizes, but given the tactile quality of nurse training, are most appropriately applied to supplement the conventional methods. However, where the importance of physical factors are periphery, such alternate training methods can provide an important way to increase upper class-size limits and therefore the rate of trained nurses entering the important role of critical care. A major issue in ICU training is that the trainee can be released into a real-life intensive care scenario with sub optimal preparation and therefore a level of anxiety for the student concerned, and some risk for the management level nurses, as patient safety is paramount. This lack of preparation places a strain on the allocation of human and non-human resources to teaching, as students require greater levels of supervision. Such issues are a concern to ICU management, as they relate to nursing skill development and patient health outcomes, as nursing training is potentially dangerous for patients who are placed in the care of inexperienced staff. As a solution to this problem, we present a prototype ICU handover training environment that has been developed in a socially interactive virtual world. Nurses in training can connect remotely via the Internet to this environment and engage in collaborative ICU handover training classes.