The Pull of Beauty The Storefront for Art and Architecture

info:eu-repo/semantics/publishedVersion

La migración infantil indocumentada de Centroamérica, un desafío a la reformulación de la política migratoria de Estados Unidos. Estudio de caso de Honduras (2010-2014)

El siguiente estudio de caso analiza la influencia de la llegada de la migración infantil indocumentada centroamericana en la reformulación de la política migratoria de Estados Unidos en el período 2010-2014. Enfocándose en el caso de Honduras para dar a conocer y analizar las causas que crean las dinámicas migratorias por parte de los menores, este trabajo analiza como la llegada de estas poblaciones genera ciertos efectos en el proceso de toma de decisión de las políticas internas de los Estados Unidos. Por un lado, para resaltar las características del fenómeno migratorio, se utilizan las teorías de redes sociales y la teoría push and pull. Por otro, mediante los conceptos de Sensibilidad y Vulnerabilidad expuestos en la teoría de la Interdependencia Compleja de las Relaciones Internacionales, como también el concepto de Seguridad Societal propuesto por Barry Buzan se estudia el nivel de influencia del fenómeno infantil en el gobierno norteamericano.

Let's Dance: A Language for Service Behavior Modeling

In Service-Oriented Architectures (SOAs), software systems are decomposed into independent units, namely services, that interact with one another through message exchanges. To promote reuse and evolvability, these interactions are explicitly described right from the early phases of the development lifecycle. Up to now, emphasis has been placed on capturing structural aspects of service interactions. Gradually though, the description of behavioral dependencies between service interactions is gaining increasing attention as a means to push forward the SOA vision. This paper deals with the description of these behavioral dependencies during the analysis and design phases. The paper outlines a set of requirements that a language for modeling service interactions at this level should fulfill, and proposes a language whose design is driven by these requirements.

"Get new lawyers!"

In James Rubin's account of the Kosovo war, he describes an exchange between Secretary Albright and Robin Cook (the British Foreign Secretary). Cook was explaining that it is difficult for Britain to commit to the war without UN Security Council approval because the legal advice he had received was that such action would be illegal under international law. Albright's response was, simply, "get new lawyers". Rubin "credits" Blair with a "push" that swung the British to "finally agree" that a UN Security Council resolution was "not legally required". Robin Cook later stated in Parliament and that the war was legal. Interestingly, Blair did not. This article does not look at whether or not such an exchange took place; rather look at the ethical issues that such a situation would generate. The article suggests what the ethical obligations of the key legal players in such institutional dramas should be—including governments seeking advice, the lawyers giving it, the ministers reporting it and the opposition in Parliament. The article sets out the particular responsibilities of the lawyers and officials of a Westminster system. It also sets out some of the institutional mechanisms for making it more likely that those obligations are fulfilled—as always through the interaction of obligations by different players that make it more risky for any player to breach his or her ethical obligations. Analogous duties would be faced by the relevant actors in other systems.

'Getting a job' : Aborignal Women's issues and experiences in the health sector

Indigenous participation in employment has long been seen as an indicator of Indigenous economic participation in Australia. Researchers have linked participation in employment to improved health outcomes, increased education levels and greater self-esteem. There has been a dramatic increase in the number of Indigenous workforce policies and employment strategies as employers and industries attempt to employ more Aboriginal and Torres Strait Islander people. Coupled with this has been a push to employ more Indigenous people in specific sectors to address the multiple layers of disadvantage experienced by Indigenous people, for example, the health sector. This paper draws on interview discussions with Aboriginal women in Rockhampton, Central Queensland, along with findings from the research of others to offer a greater understanding of the mixed benefits of increased Indigenous employment. What is demonstrated is that the nature of Indigenous employment is complex and not as simple as ‘just getting a job’.

The measurement of applied forces during anterior single rod correction of adolescent idiopathic scoliosis

Adolescent idiopathic scoliosis (AIS) is the most common form of spinal deformity in paediatrics, prevalent in approximately 2-4% of the general population. While it is a complex three-dimensional deformity, it is clinically characterised by an abnormal lateral curvature of the spine. The treatment for severe deformity is surgical correction with the use of structural implants. Anterior single rod correction employs a solid rod connected to the anterior spine via vertebral body screws. Correction is achieved by applying compression between adjacent vertebral body screws, before locking each screw onto the rod. Biomechanical complication rates have been reported as high as 20.8%, and include rod breakage, screw pull-out and loss of correction. Currently, the corrective forces applied to the spine are unknown. These forces are important variables to consider in understanding the biomechanics of scoliosis correction. The purpose of this study was to measure these forces intra-operatively during anterior single rod AIS correction.

Reading Squadron: Crossing borders in literacy experiences for preservice teachers.

Teaching literacy requires accurate and current knowledge in the field (Commonwealth of Australia, 2005). There have been persistent inquiries into what constitutes specialist knowledge and skills for teaching students to be literate. Preservice teacher education is fundamental to literacy development, which includes the approaches universities employ to prepare graduates for teaching literacy. Indeed, preservice teacher programs and literacy education also elicit insatiable media coverage. There is a continued push to improve literacy outcomes for school students across the nation and prepare the literacy knowledge and skills of Australian teachers. This study mainly focuses on 10 final-year preservice teachers attending a regional university campus who volunteered for further experiences to teach students to read traditional texts. These preservice teachers completed three university literacy units before commencing with practical applications. A literacy program, titled Reading Squadron, was developed in partnership between a local primary school and the university. Primary students were identified by the school as requiring literacy support. Preservice teachers attended a whole day training session run by school staff at the university and then visited the school for two one-hour sessions each week over a six-week period. Each preservice teacher was assigned two students and worked with each student for half an hour twice a week. The aim of this small-scale qualitative study was to investigate the perceptions of the preservice teachers and school staff as a result of their involvement in the Reading Squadron program. The preservice teachers completed a questionnaire to determine their views of the program and ascertain how it assisted their development. Further data were gathered from the preservice teachers through individual face-to-face interviews. Three school staff involved in the program also completed a questionnaire to determine the value of the program. Results indicated that the preservice teachers made links between theory and practice, and felt they gained knowledge about teaching reading. Three preservice teachers noted it was difficult to work around timetable commitments but gained from the experience and suggested embedding such experiences into university literacy units. Data gathered from school staff indicated that six-weeks was not sufficient time to measure improvements in the school students, however, they were supportive of such a program, particularly for its continuation. Collaborations between schools and universities can provide opportunities for preservice teachers to use theoretical knowledge gained from core university subjects with application to assist primary students’ literacy development in schools. Teachers in this study were supportive of the Reading Squadron program, however, more data needed to be collected to understand the literacy improvement of students. Longitudinal studies are required to ascertain specific knowledge and skills gained by preservice teachers to teach reading and how these programs enhance students’ literacy levels.

Intercultural conversation : building understanding together

Classroom talk has long been recognised as central to student learning. Efforts are made therefore to 'stretch', 'extend' or 'push' English-language learners' (ELLS') linguistic and conceptual development by promoting more complex instructional talk. Conversation is a two-way activity, yet the focus is often directed to the ELL. To address this gap, this article suggests ideas for developing the capabilities of all students -- ELLS or otherwise -- for instructional conversations in mainstream classrooms where English is used by some as a first or only language, and by others as a second language.

Australian Association for Exercise and Sport Science position stand : optimising cancer outcomes through exercise

Cancer represents a major public health concern in Australia. Causes of cancer are multifactorial with lack of physical activity being considered one of the known risk factors, particularly for breast and colorectal cancers. Participating in exercise has also been associated with benefits during and following treatment for cancer, including improvements in psychosocial and physical outcomes, as well as better compliance with treatment regimens, reduced impact of disease symptoms and treatment-related side effects, and survival benefits for particular cancers. The general exercise prescription for people undertaking or having completed cancer treatment is of low to moderate intensity, regular frequency (3-5 times/week) for at least 20 minutes per session, involving aerobic, resistance or mixed exercise types. Future work needs to push the boundaries of this exercise prescription, so that we can better understand what constitutes optimal, desirable and necessary frequency, duration, intensity and type, and how specific characteristics of the individual (e.g., age, cancer type, treatment, presence of specific symptoms) influence this prescription. What follows is a summary of the cancer and exercise literature, in particular the purpose of exercise following diagnosis of cancer, the potential benefits derived by cancer patients and survivors from participating in exercise programs, and exercise prescription guidelines and contraindications or considerations for exercise prescription with this special population. This report represents the position stand of the Australian Association of Exercise and Sport Science on exercise and cancer recovery and has the purpose of guiding Accredited Exercise Physiologists in their work with cancer patients.

Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

AITPM Email Newsletter Volume 0905, May 2009: Presidents Message

President’s Message Hello fellow AITPM members, We’ve been offered a lot of press lately about the Federal Government’s plan for the multibillion dollar rollout of its high speed broadband network, which at the moment is being rated to a speed of 100Mb/s. This seems fantastic in comparison to the not atypical 250 to 500kb/s that I receive on my metropolitan cable broadband, which incidentally my service provider rates at theoretical speeds of up to 8 Mb/s. I have no doubt that such a scheme will generate significant advantages to business and consumers. However, I also have some reservations. Only a few of years ago I marvelled at my first 256Mb USB stick, which cost my employer about $90. Last month I purchased a 16Gb stick with a free computer carry bag for $80, which on the back of my envelope has given me about 72 times the value of my first USB stick not including the carry bag! I am pretty sure the technology industry will find a way to eventually push a lot more than 100Mb/s down the optic fibre network just as they have done with pushing several Mb/s ADSL2 down antique copper wire. This makes me wonder about the general problem of inbuilt obsolescence of all things high-tech due to rapid advances in the tech industry. As a transport professional I then think to myself that our industry has been moving forward at somewhat of a slower pace. We certainly have had major milestones having significant impacts, such as the move from horse and cart to the self propelled motor vehicle, sealing and formal geometric design of roads, development of motorways, signalisation of intersections, coordination of networks, to simulation modelling for real time adaptive control (perhaps major change has been at a frequency of 30 years or so?). But now with ITS truly penetrating the transport market, largely thanks to the in-car GPS navigator, smart phone, e-toll and e-ticket, I believe that to avoid our own obsolescence we’re going to need to “plan for ITS” rather than just what we seem to have been doing up until now, that is, to get it out there. And we’ll likely need to do it at a faster pace. It will involve understanding how to data mine enormous data sets, better understanding the human/machine interface, keeping pace with automotive technology more closely, resolving the ethical and privacy chestnuts, and in the main actually planning for ITS to make peoples’ lives easier rather than harder. And in amongst this we’ll need to keep pace with the types of technology advances similar to my USB stick example above. All the while we’ll be making a brand new set of friends in the disciplines that will morph into ITS along with us. Hopefully these will all be “good” problems for our profession to have. I should close in reminding everyone again that AITPM’s flagship event, the 2009 AITPM National Conference, Traffic Beyond Tomorrow, is being held in Adelaide from 5 to 7 August. www.aitpm.com has all of the details about how to register, sponsor a booth, session, etc. Best regards all, Jon Bunker

Developing a best practice framework for implementing public private partnerships (PPP) in Hong Kong

Public Private Partnership (PPP) is a well established methodology for procuring public works projects. By incorporating the private sector’s expertise, efficiency, innovation, business sense, risk sharing, financing etc. into public works projects, the quality of public services and facilities can be uplifted. Like many jurisdictions, Hong Kong is also keen to take aboard this methodology which is so familiar but yet so distant. Although they have been one of the first jurisdictions to utilise the private sector in public works projects, their comfortable financial reserves has meant that there has been no urge to push the movement until recently. PPP has become increasingly popular amongst governments. The Hong Kong Special Administrative Region (HKSAR) government is no exception. Some of the more active works departments have commissioned studies to investigate the best ways to deliver these projects, others have even trialed the method themselves. The efficiency Unit of the HKSAR government has also become an active arm in conducting research in this area. Although so, the information that is currently available is still very broad. Building from their works there is a need to develop a best practice framework for implementing PPP projects in Hong Kong by incorporating international experiences. To develop a best practice framework will require thorough investigation into the benefits, difficulties and critical success factor of PPP. PPP should also be compared with other procurement methods. In order to do so it is important to clearly understand the local situation by an analysis of projects conducted to date. Lessons learnt can further be derived from other countries and incorporated to those derived locally. Finally the best conditions in terms of project nature, complexity, types, and scales for adopting PPP should be derived. The aim and objectives of this study were achieved via a comprehensive literature review, in-depth case analyses, interview survey with experts from both Hong Kong and overseas, and finally a large scale data collection was conducted via a questionnaire survey with PPP practitioners. These findings were further triangulated before they were used as the basis to form the best practice framework presented in this thesis. The framework was then further validated by PPP experts to ensure it is comprehensive, objective, reliable and practical. This study has presented a methodology that can be adopted for future studies. It has also updated our knowledge on the development trends of PPP as well as opened up the experiences of other jurisdictions. The findings have shown that the local industry is familiar with “what” should be done in PPP projects but they are unsure of “how” these goals can be achieved. This framework has allowed this further knowledge to be delivered to PPP practitioners. As a result, the development of this framework can help to resolve the current economic crisis by encouraging more developments and business opportunities for the private sector. In addition, the correct projects can be delivered by PPP, the advantages of PPP can be maximised, and the general public can benefit from the private sector’s participation.

A constructivist approach to media literacy education: The role of the library

An informed citizenry is essential to the effective functioning of democracy. In most modern liberal democracies, citizens have traditionally looked to the media as the primary source of information about socio-political matters. In our increasingly mediated world, it is critical that audiences be able to effectively and accurately use the media to meet their information needs. Media literacy, the ability to access, understand, evaluate and create media content is therefore a vital skill for a healthy democracy. The past three decades have seen the rapid expansion of the information environment, particularly through Internet technologies. It is obvious that media usage patterns have changed dramatically as a result. Blogs and websites are now popular sources of news and information, and are for some sections of the population likely to be the first, and possibly only, information source accessed when information is required. What are the implications for media literacy in such a diverse and changing information environment? The Alexandria Manifesto stresses the link between libraries, a well informed citizenry and effective governance, so how do these changes impact on libraries? This paper considers the role libraries can play in developing media literate communities, and explores the ways in which traditional media literacy training may be expanded to better equip citizens for new media technologies. Drawing on original empirical research, this paper highlights a key shortcoming of existing media literacy approaches: that of overlooking the importance of needs identification as an initial step in media selection. Self-awareness of one’s actual information need is not automatic, as can be witnessed daily at reference desks in libraries the world over. Citizens very often do not know what it is that they need when it comes to information. Without this knowledge, selecting the most appropriate information source from the vast range available becomes an uncertain, possibly even random, enterprise. Incorporating reference interview-type training into media literacy education, whereby the individual will develop the skills to interrogate themselves regarding their underlying information needs, will enhance media literacy approaches. This increased focus on the needs of the individual will also push media literacy education into a more constructivist methodology. The paper also stresses the importance of media literacy training for adults. Media literacy education received in school or even university cannot be expected to retain its relevance over time in our rapidly evolving information environment. Further, constructivist teaching approaches highlight the importance of context to the learning process, thus it may be more effective to offer media literacy education relating to news media use to adults, whilst school-based approaches focus on types of media more relevant to young people, such as entertainment media. Librarians are ideally placed to offer such community-based media literacy education for adults. They already understand, through their training and practice of the reference interview, how to identify underlying information needs. Further, libraries are placed within community contexts, where the everyday practice of media literacy occurs. The Alexandria Manifesto stresses the link between libraries, a well informed citizenry and effective governance. It is clear that libraries have a role to play in fostering media literacy within their communities.

The stimulation of healing within a rat calvarial defect by mPCL–TCP/collagen scaffolds loaded with rhBMP-2

Bone morphogenetic proteins (BMPs) have been widely investigated for their clinical use in bone repair and it is known that a suitable carrier matrix to deliver them is essential for optimal bone regeneration within a specific defect site. Fused deposited modeling (FDM) allows for the fabrication of medical grade poly 3-caprolactone/tricalcium phosphate (mPCL–TCP) scaffolds with high reproducibility and tailor designed dimensions. Here we loaded FDM fabricated mPCL–TCP/collagen scaffolds with 5 mg recombinant human (rh)BMP-2 and evaluated bone healing within a rat calvarial critical-sized defect. Using a comprehensive approach, this study assessed the newly regenerated bone employing microcomputed tomography (mCT), histology/histomorphometry, and mechanical assessments. By 15 weeks, mPCL–TCP/collagen/rhBMP-2 defects exhibited complete healing of the calvarium whereas the non- BMP-2-loaded scaffolds showed significant less bone ingrowth, as confirmed by mCT. Histomorphometry revealed significantly increased bone healing amongst the rhBMP-2 groups compared to non-treated scaffolds at 4 and 15 weeks, although the % BV/TV did not indicate complete mineralisation of the entire defect site. Hence, our study confirms that it is important to combine microCt and histomorphometry to be able to study bone regeneration comprehensively in 3D. A significant up-regulation of the osteogenic proteins, type I collagen and osteocalcin, was evident at both time points in rhBMP-2 groups. Although mineral apposition rates at 15 weeks were statistically equivalent amongst treatment groups, microcompression and push-out strengths indicated superior bone quality at 15 weeks for defects treated with mPCL–TCP/collagen/rhBMP-2. Consistently over all modalities, the progression of healing was from empty defect < mPCL–TCP/collagen < mPCL–TCP/collagen/rhBMP-2, providing substantiating data to support the hypothesis that the release of rhBMP-2 from FDM-created mPCL–TCP/collagen scaffolds is a clinically relevant approach to repair and regenerate critically-sized craniofacial bone defects. Crown Copyright 2008 Published by Elsevier Ltd. All rights reserved.

Girl in the Shadows and resilience and coping strategies in contemporary young adult fiction

The novel manuscript Girl in the Shadows tells the story of two teenage girls whose friendship, safety and sanity are pushed to the limits when an unexplained phenomenon invades their lives. Sixteen-year-old Tash has everything a teenage girl could want: good looks, brains and freedom from her busy parents. But when she looks into her mirror, a stranger’s face stares back at her. Her best friend Mal believes it’s an evil spirit and enters the world of the supernatural to find answers. But spell books and ouija boards cannot fix a problem that comes from deep within the soul. It will take a journey to the edge of madness for Tash to face the truth inside her heart and see the evil that lurks in her home. And Mal’s love and courage to pull her back into life. The exegesis examines resilience and coping strategies in adolescence, in particular, the relationship of trauma to brain development in children and teenagers. It draws on recent discoveries in neuroscience and psychology to provide a framework to examine the role of coping strategies in building resilience. Within this broader context, it analyses two works of contemporary young adult fiction, Freaky Green Eyes by Joyce Carol Oates and Sonya Hartnett’s Surrender, their use of the split persona as a coping mechanism within young adult fiction and the potential of young adult literature as a tool to help build resilience in teen readers.