Report on Rest Area Water Systems for Interstate Highways, 1967

Introduction: As part of the roadside development along the Interstate Highway System, the Iowa State Highway Commission has constructed eight pair of rest area facilities. Furthermore, two pair are presently under construction with an additional two pair proposed for letting in 1967. An additional nine and one-half pairs of rest areas are in the planning phase, a grand total of 45 rest Brea buildings. The facilities existing were planned and designed in a relatively short period of time. The rest area facilities are unusual in terms of water use, water demand rates, and the fact that there are no applicable guidelines from previous installations. Such facilities are a pioneering effort to furnish a service -which the travelling public desires and will use. The acceptance and current use of the existing facilities shows that the rest areas do provide a service the public will use and appreciate. The Iowa State Highway Commission is to be congratulated for this· pioneering effort. However there are problems, as should be expected when design of a new type of facility has no past operating experience to use as a guide. Another factor which enters is that a rest area facility is quite different and rather unrelated to engineering in the highway field of practice. Basically, the problems encountered can be resolved into several areas, namely 1) maintenance problems in equipment due to 2) insufficient capacity of several other elements of the water systems, and 3) no provisions for water quality control. This study and report is supposed to essentially cover the review of the rest areas, either existing and under construction or letting. However, the approach used has been somewhat different. Several basic economically feasible water system schemes have been developed which are· adaptable to the different well capacities and different water qualities encountered. These basic designs are used as a guide in recommending modifications to the existing rest area water systems, anticipating that the basic designs will be used for future facilities. The magnitude of the problems involved is shown by the fact that the projected water use and demand variations of each rest area building is equivalent to the water supply for a community of about 100 people. The problems of proper operation and maintenance of an eventual thirty to forty-five such facilities are gigantic. For successful operation the rest area water systems must have a high degree of standardization and interchangeability of all elements of the water systems, even if it means a limited degree of over-design in some rest area facilities.

Development of Craniofacial Bone Defect Reconstruction Implant Based on Fibre-Reinforced Composite with Photopolymerisable Resin Systems. Experimental studies in vitro and in vivo.

Reconstruction of defects in the craniomaxillofacial (CMF) area has mainly been based on bone grafts or metallic fixing plates and screws. Particularly in the case of large calvarial and/or craniofacial defects caused by trauma, tumours or congenital malformations, there is a need for reliable reconstruction biomaterials, because bone grafts or metallic fixing systems do not completely fulfill the criteria for the best possible reconstruction methods in these complicated cases. In this series of studies, the usability of fibre-reinforced composite (FRC) was studied as a biostable, nonmetallic alternative material for reconstructing artificially created bone defects in frontal and calvarial areas of rabbits. The experimental part of this work describes the different stages of the product development process from the first in vitro tests with resin-impregnated fibrereinforced composites to the in vivo animal studies, in which this FRC was tested as an implant material for reconstructing different size bone defects in rabbit frontal and calvarial areas. In the first in vitro study, the FRC was polymerised in contact with bone or blood in the laboratory. The polymerised FRC samples were then incubated in water, which was analysed for residual monomer content by using high performance liquid chromatography (HPLC). It was found that this in vitro polymerisation in contact with bone and blood did not markedly increase the residual monomer leaching from the FRC. In the second in vitro study, different adhesive systems were tested in fixing the implant to bone surface. This was done to find an alternative implant fixing system to screws and pins. On the basis of this study, it was found that the surface of the calvarial bone needed both mechanical and chemical treatments before the resinimpregnated FRC could be properly fixed onto it. In three animal studies performed with rabbit frontal bone defects and critical size calvarial bone defect models, biological responses to the FRC implants were evaluated. On the basis of theseevaluations, it can be concluded that the FRC, based on E-glass (electrical glass) fibres forming a porous fibre veil enables the ingrowth of connective tissues to the inner structures of the material, as well as the bone formation and mineralization inside the fibre veil. Bone formation could be enhanced by using bioactive glass granules fixed to the FRC implants. FRC-implanted bone defects healed partly; no total healing of defects was achieved. Biological responses during the follow-up time, at a maximum of 12 weeks, to resin-impregnated composite implant seemed to depend on the polymerization time of the resin matrix of the FRC. Both of the studied resin systems used in the FRC were photopolymerised and the heat-induced postpolymerisation was used additionally.

Hybrid turbo FEC/ARQ systems and distributed space-time coding for cooperative transmission

Cooperative transmission can be seen as a "virtual" MIMO system, where themultiple transmit antennas are in fact implemented distributed by the antennas both at the source and the relay terminal. Depending on the system design, diversity/multiplexing gainsare achievable. This design involves the definition of the type of retransmission (incrementalredundancy, repetition coding), the design of the distributed space-time codes, the errorcorrecting scheme, the operation of the relay (decode&forward or amplify&forward) and thenumber of antennas at each terminal. Proposed schemes are evaluated in different conditionsin combination with forward error correcting codes (FEC), both for linear and near-optimum(sphere decoder) receivers, for its possible implementation in downlink high speed packetservices of cellular networks. Results show the benefits of coded cooperation over directtransmission in terms of increased throughput. It is shown that multiplexing gains areobserved even if the mobile station features a single antenna, provided that cell wide reuse of the relay radio resource is possible.

Product costing in SAP environment

Kustannuslaskennan ala on muuttumassa. IT teknologian hämmästyttävän nopea kehitys viime vuosina on luonut kustannuslaskennalle uusia mahdollisuuksia. Toisaalta myös kustannuslaskennalle asetetut vaatimukset ovat muuttuneet. Nykyisin kustannustietoutta tarvitaan erityisesti päätöksenteon tueksi. Kaikesta huolimatta yleisesti käytetyt laskentamenetelmät eivät ole muuttuneet. Työn tavoite on tutkia mahdollisia tapoja tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP toiminnanohjausjärjestelmän avulla. Erityisesti toiminnanohjausjärjestelmien nopea kehitys on mahdollistanut aikaisempaa nopeamman ja tarkemman kustannuslaskennan. On kuitenkin muistettava, että järjestelmät ovat vaintyökaluja. On siis erittäin tärkeää valita tarkoituksenmukainen laskentamenetelmä. Työn perimmäinen tarkoitus onkin valita kyseessä olevaan tilanteeseen sopivin menetelmä.Viime vuosien akateemisessa kirjoittelussa on esitelty useita uusia kustannuslaskentamenetelmiä. Toimintolaskennan uusi versio, Time-Driven Activity-Based Costing, on eräs varteenotettava vaihtoehto tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP-ympäristössä. Toinen hyvin soveltuva menetelmä on Resource Consumption Accounting (RCA), joka soveltuu erityisen hyvin SAP-ympäristöön.Molemmilla menetelmillä on hyvät ja huonot puolet, mutta tässä tapauksessa RCA soveltuu tehtävään paremmin. RCA on joustava ja tarjoaa laaja-alaista tietoa. Tästä syystä Resource Consumption Accounting oli paras vaihtoehto.Työssä rakennettu RCA malli testattiin kolmen erilaisen tuotteen historiallisella datalla. RCA:ntuomia mahdollisuuksia pohdittiin ja ongelmia selvitettiin. RCA on hyvin saman tyyppinen yrityksessä jo käytettävän laskentamenetelmän kanssa. Implementointi ei siis olisi mahdoton tehtävä. RCA kuitenkin tarjoaa mahdollisuuksia, joita nykyisellä menetelmällä ei voida saavuttaa.

Design of adjustable packaging line

Diplomityön tavoite oli tutkia, mitä toimintoja ja tekniikoita uusi, joustava kartonkipakkauslinja sisältää ja mitkä suuntaukset pakkausteollisuudessa tulevat olemaan tärkeitä tulevaisuudessa. Pakkauslinjan päätoimintoja tarkasteltiin nykyisten jatulevaisuuden tekniikoiden pohjalta. Erityisesti tarkasteltiin laser-sovellusten käytön mahdollisuutta pakkauslinjan eri osatoiminnoissa. Katsaus pakkausteollisuuden tulevaisuuden näkymiin luotiin kirjallisuuden ja aikaisempien tutkimusten pohjalta, minkä perusteella työssä oletetaan, että yksilölliset ja monitoimipakkaukset tulevat lisääntymään tulevaisuudessa. Eri tuotantoerien välillä olevat asetusajat tulee saada minimoitua, mutta millä keinoin joustavuus on saavutettavissa? Yksi ratkaisu pakkausten valmistamisessa on käyttää robottisolua, mikä on mahdollista luultavasti ainakin kuppimuotoisten pakkausten kohdalla. Muutenkin robotiikka on lisääntymässä pakkausteollisuudessa. Digitaalisten painotekniikoiden kehitys on mahdollistanut yksilölliset painatukset. Tulevaisuudessa painatus on mahdollista tehdä pakkauslinjan loppupäässä, jopa vasta täytön ja suljennan jälkeen. Laserleikkaus on jo nyt käytössä, mutta tulevaisuudessa myös saumaus ja perinteinen nuuttaus on mahdollista tehdä lasersovelluksia käyttäen. Kehittynyt, väyläpohjainen ohjausjärjestelmä on tulevaisuudessa välttämätön joustavassa pakkauslinjassa. Internetin välityksellä toimiva etäohjattu virheenkorjausdiagnostiikka tulee myös olemaan itsestäänselvyys tulevaisuudessa. Kustannussäästöjä voidaan saavuttaa käyttämälläpakkauslinjassa modulaarista rakennetta. Standardiosien ja standardiosajärjestelmien käyttäminen pienentää myös käyttö- ja huoltokustannuksia. Tärkeää on kuitenkin muistaa, ettei joustavuutta voida saavuttaa pelkästään yhtä ominaisuutta tai tekniikkaa hyödyntäen vaan monia menetelmiä yhdistäen. Suunniteltavan pakkauslinjan toiminta on myös hyvä varmistaa käyttäen apuna mallinnusta ja simulointia.

Developing Service Promise Concept Based on Supply Chain

Diplomityön tavoitteena on analysoida ja kehittää palvelulupauskonseptia toimitusketjuun perustuen Halton Oy:ssä. Työ toteutettiin, koska asiakaslähtöinen liiketoimintatapa on voimakkaasti valtaamassa alaa tuote- ja tuotantopainotteiselta toimintatavalta. Tuotteiden erinomaisuus koetaan markkinoilla yhä useammin itsestään selvyytenä. Prosessien tehokas hallitseminen ja asiakkaan kokeman lisäarvon muodostaminen ovat muodostuneet ratkaisevimmaksi kilpailuedun luojaksi. Toimitusketjun hallinnalla ja sähköisellä kaupankäynnillä on tärkeä rooli tämän kilpailuedun muodostumisessa.Diplomityö käsittelee uuden palvelulupauskonseptin tarjoamia etuja Halton Oy:lle. Työssä pureudutaan toimitusketjun ja sähköisen kaupankäynnin integraatiomahdollisuuksiin. Tarkoituksena on selvittää parhaat mahdolliset kriteerit Haltonin palvelulupauskonseptilleja luoda menetelmät yrityksen materiaalivirtojen sekä uuden konseptin analysoinnille ja kehittämiselle jatkossa.

Metsäteollisuuden prosessien suunnittelu simulointiympäristössä

Prosessisimulointiohjelmistojen käyttö on yleistynyt paperiteollisuuden prosessien kartoituksessa ja kyseiset ohjelmistot ovat jo pitkään olleet myös Pöyry Engineering Oy:n työkaluja prosessisuunnittelussa. Tämän työn tavoitteeksi määritettiin prosessisimulointiohjelmistojen käytön selvittäminen suomalaisissa paperitehtaissa sekä prosessisimuloinnin tulevaisuuden näkymien arviointi metsäteollisuuden suunnittelupalveluissa liiketoiminnan kehittämiseksi. Työn teoriaosassa selvitetään mm. seuraavia asioita: mitä prosessisimulointi on, miksi simuloidaan ja mitkä ovat simuloinnin hyödyt ja haasteet. Teoriaosassa esitellään yleisimmät käytössä olevat prosessisimulointiohjelmistot, simulointiprosessin eteneminen sekä prosessisimuloinnin tuotteistamisen vaatimuksia. Työn kokeellisessa osassa selvitettiin kyselyn avulla prosessisimulointiohjelmistojen käyttöä Suomen paperitehtaissa. Kysely lähetettiin kaikille Suomen tärkeimmille paperitehtaille. Kyselyn avulla selvitettiin mm, mitä ohjelmia käytetään, mitä on simuloitu, mitä pitää vielä simuloida ja kuinka tarpeellisena prosessisimulointia pidetään. Työntulokset osoittavat, että kaikilla kyselyyn vastanneilla suomalaisilla paperitehtailla on käytetty prosessisimulointia. Suurin osa simuloinneista on tehty konelinjoihin sekä massa- ja vesijärjestelmiin. Tulevaisuuden tärkeimpänä kohteena pidetään energiavirtojen simulointia. Simulointimallien pitkäjänteisessä hyödyntämisessä ja ylläpidossa on kehitettävää, jossa simulointipalvelujen hankkiminen palveluna on tehtaille todennäköisin vaihtoehto. Johtopäätöksenä on se, että tehtailla on tarvetta prosessisimuloinnille. Ilmapiiri on kyselytuloksien mukaan suotuisa ja simulointi nähdään tarpeellisena työkaluna. Prosessisimuloinnin markkinointia, erillispalvelutuotteen lisäksi, kannattaisi kehittää siten, että simulointimallin ylläpito jatkuisi projektin jälkeen lähipalveluna. Markkinointi pitäisi tehdä jo projektin alkuvaiheessa tai projektin aikana. Simulointiohjelmien kirjosta suunnittelutoimiston kannattaa valita simulointiohjelmistoja, jotka sopivat sille parhaiten. Erityistapauksissa muiden ohjelmien hankintaa kannattaa harkita asiakkaan toivomusten mukaisesti.

Developing of Service Platform Thinking in Modern Electricity Distribution Business

Palvelukehitystoiminta sitoo huomattavan määrän resursseja ja on pitkäkestoista toimintaa. Innovatiivisuuteen tähtäämällä ja systemaattisella tuotekehitystyöllä yritys parantaa jatkuvuutta omassa liiketoiminnassaan. Alusta-ajattelu tuo uuden ulottuvuuden tuotteiden ja palveluiden kehitykseen. Alustan kehittäminen tukemaan tuote- ja palvelukehitystoimintaa ja yksinkertaistamaan tuote/palvelurakenteita antaa yrityksissä lisäpotentiaalia esimerkiksi lyhentyneiden kehitysaikojen, paremman kompleksisuuden hallinnan ja kustannustehokkuuden nousun myötä. Toimintojen tehostuminen yritystasolla saa aikaan mahdollisuuksien lisääntymisen nykyisillä liiketoimintasektoreilla. Palvelualustan kehityksellä päästään palvelurakenteen mallintamisen kautta parempaan liiketoiminnan hallitsemiseen ja systemaattisempaan tuotekehityksen läpivientiin. Palvelualustan yhtenä tärkeimpänä hyötynä on, että palvelun rakenteellisuus saadaan kuvattua alustaan. Lisäksi on tärkeää määritellä vastuutukset alustan kehityksessä, sekä pystyä mallintamaan informaation kulku (rajapinnat) prosesseissa.

Value added logistical support service. Part 1 : Trends and new concept model

The aim of `Valssi' study was to find out the service requirements in `business-to-business' (B2B) markets and to present a new logistics service concept, where the traditional logistics service is expanded with significant manufacturing and value addedfacilities. The traditional third-party logistics service providers are not necessarily able to offer services, which cover widely the needs of potential customers. The study has been outlined to spare part markets in metal industry. In the second phase of the Valssi-project the aim is to examine the economical conditions and potentiality of the new logistics business concept. This research report (Part 1) concentrates on examining current trends in global and domestic logistics markets. Based on detailed survey among the participating companies, the study presents basis for a new logistics business concept model. The developed concept consists of 12 different service modules, which are split into deeper details of processes. The integration of worldwide supplier and service provider network together with customer companies systems is a challenge. The report focuses on evaluating the requirements for the new business concept from the customer-companies point of view. The study paints an overall picture of distribution and service provider network including an abstract about the software and system integration possibilities. As a result of the survey, it can be concluded that thereis need for the new business concept among the participating companies, and a modular service concept meets the requirements of them, because the new sophisticated concept considers the specialities involved in spare part logistics in metal industry.

Distribution systems of the food sector in Russia: the perspective of Finnish food industry

Finnish food producers' trade with Russia has experienced profound changes since the collapse of the Soviet Union. Simultaneously, the distribution systems of foodstuffs have changed remarkably. This study sheds some light into these changes and analyses the current situation in distribution systems of foodstuffs in Russia. In addition, the study discusses the possibilities of Finnish food producers to get more of their products to the shelves of Russian food retail stores. Before the 1998 financial crisis, the import of foreign foodstuffs was booming in Russia due to the overvalued rouble. As a result of the financial crisis, food import collapsed. The export of Finnish foodstuffs to Russia has been slowly recovering during the past few years, but in the most important product categories the pre-crisis levels have so far not been reached and maybe will not be reached. In certain product categories the growth has been only marginal. It seems that starting localproduction will become increasingly important in the future. This is further encouraged by the fact that Russian consumers favour domestic food products. Russian consumers are very price conscious and demand quality in food products. The perceived price-quality ratio is an important criterion in the purchase decision.The majority of foodstuff retail is still conducted via unorganised forms of trade (e.g. kiosks and marketplaces) but modern retail chains are developing at a fast pace in Russia. They are also expected to dominate the retail trade in foodstuffs over the unorganised forms of trade in the future. This will change the distribution systems as well. The retail chains are trying to shorten the distribution chain, similarly to what has been seen in the Western countries. This together with the strengthening of retail chains is likely to shrink the role of wholesalers, as the chains increasingly want to work directly with the producers. Many large retail chains are acquiring or have already acquired a distribution centre or centres in order to boost efficiency and control the flow of products. The strengthening of the retail chains also gives them power in negotiations, which the producers and distributors have to adjust to. For example store entry fees and retail chains' own private label products pose challenges to the food producers. In the food production sector the competition is fierce, as large Russianand foreign producers want to ensure their piece of the market. The largest producers utilise their size: they invest in big marketing campaigns and are willing to pay high entry fees to retail chains in order to secure a place on the store shelves and to build a strong brand in Russia. This complicates the situation from the viewpoint of small producers. Currently, the most popular type of distribution system among the interviewed Finnish food producers is based on a network of local distributors. There is, however, a strong consensus on the importanceof starting local production in order to be a serious actor in Russia in the future. Factors that hinder the starting of local production include the lack of local infrastructure and qualified staff, and the low risk tolerance of Finnish firms. Major barriers for entry in Russia are the actions of authorities, fierce competition, fragmented market and Finnish producers' heavy production costs. The suggested strategies for increasing the market share include focusing geographically or segment-wise, introducing new products, starting local production, andcooperation between Finnish producers. Smallness was one reason why Finnish producers had to cut down their operations in Russia due to the 1998 crisis. Smaller producers had fewer resources to tolerate losses during the period of crisis. Smallness is reflected also on trade negotiations with retail chains and distributors. It makes it harder to cope with the store entry fees and to differentiatefrom the mass of products propped up by expensive advertising. Finally, it makes it harder for Finnish producers to start or expand local production, as it is more difficult for a small producer to get financing and to tolerate the increased risks. Compensating for the smallness might become the crucial factor determining the future success of Finnish food producers in the Russian market.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Technology selection and group decision support systems: Case studies on supporting strategic technology selection processes

The objective of the dissertation is to increase understanding and knowledge in the field where group decision support system (GDSS) and technology selection research overlap in the strategic sense. The purpose is to develop pragmatic, unique and competent management practices and processes for strategic technology assessment and selection from the whole company's point of view. The combination of the GDSS and technology selection is approached from the points of view of the core competence concept, the lead user -method, and different technology types. In this research the aim is to find out how the GDSS contributes to the technology selection process, what aspects should be considered when selecting technologies to be developed or acquired, and what advantages and restrictions the GDSS has in the selection processes. These research objectives are discussed on the basis of experiences and findings in real life selection meetings. The research has been mainly carried outwith constructive, case study research methods. The study contributes novel ideas to the present knowledge and prior literature on the GDSS and technology selection arena. Academic and pragmatic research has been conducted in four areas: 1) the potential benefits of the group support system with the lead user -method,where the need assessment process is positioned as information gathering for the selection of wireless technology development projects; 2) integrated technology selection and core competencies management processes both in theory and in practice; 3) potential benefits of the group decision support system in the technology selection processes of different technology types; and 4) linkages between technology selection and R&D project selection in innovative product development networks. New type of knowledge and understanding has been created on the practical utilization of the GDSS in technology selection decisions. The study demonstrates that technology selection requires close cooperation between differentdepartments, functions, and strategic business units in order to gather the best knowledge for the decision making. The GDSS is proved to be an effective way to promote communication and co-operation between the selectors. The constructs developed in this study have been tested in many industry fields, for example in information and communication, forest, telecommunication, metal, software, and miscellaneous industries, as well as in non-profit organizations. The pragmatic results in these organizations are some of the most relevant proofs that confirm the scientific contribution of the study, according to the principles of the constructive research approach.

Potential health-care service utilization substitution effects induced by case management for emergency department frequent users

BACKGROUND: In most of the emergency departments (ED) in developed countries, a subset of patients visits the ED frequently. Despite their small numbers, these patients are the source of a disproportionally high number of all ED visits, and use a significant proportion of healthcare resources. They place a heavy economic burden on hospital and healthcare systems budgets overall. Several interventions have been carried out to improve the management of these ED frequent users. Case management has been shown in some North American studies to reduce ED utilization and costs. In these studies, cost analyses have been carried out from the hospital perspective without examining the costs induced by healthcare consumed in the community. However, case management might reduce ED visits and costs from the hospital's perspective, but induce substitution effects, and increase health service utilization outside the hospital. This study examined if an interdisciplinary case-management intervention-compared to standard ED care -reduced costs generated by frequent ED users not only from the hospital perspective, but also from the healthcare system perspective-that is, from a broader perspective taking into account the costs of healthcare services used outside the hospital. METHODS: In this randomized controlled trial, 250 adult frequent emergency department users (5 or more visits during the previous 12 months) who visited the ED of the University Hospital of Lausanne, Switzerland, between May 2012 and July 2013 were allocated to one of two groups: case management intervention (CM) or standard ED care (SC), and followed up for 12 months. Depending on the perspective of the analysis, costs were evaluated differently. For the analysis from the hospital's perspective, the true value of resources used to provide services was used as a cost estimate. These data were obtained from the hospital's analytical accounting system. For the analysis from the health-care system perspective, all health-care services consumed by users and charged were used as an estimate of costs. These data were obtained from health insurance providers for a subsample of participants. To allow comparisons in a same time period, individual monthly average costs were calculated. Multivariate linear models including a fixed effect "group" were run using socio-demographic characteristics and health-related variables as controlling variables (age, gender, educational level, citizenship, marital status, somatic and mental health problems, and risk behaviors).

Pientalon teknisen tilan tuotteistus

Diplomityön tavoitteena on selvittää asiakkaiden toiveita ja arvostuksia, joiden avulla voidaan rakentaa silta teknisiin ominaisuuksiin ja niiden variointiin. Rinnakkaisena työnä lähinnä teknisestä näkökulmasta teki Lauri Manninen omaa tutkimustyötä. Tässä raportissa on teknisiä ominaisuuksia käsiteltäessä lainattu Mannisen työtä. Pientaloa suunniteltaessa on valittava mm. lämmitysjärjestelmä ja talotekniikan taso. Suomessa pientaloihin on tarjolla useita lämmitysjärjestelmävaihtoehtoja. Tunnetuimpia päälämmönlähteitä ovat maa, puu, pelletti, öljy, kaasu, sähkö ja kaukolämpö. Lämmitysjärjestelmän lisäksi teknisiin tiloihin sijoitetaan muuta talotekniikkaa. Tässä diplomityössä tarkastellaan eri lämmitysjärjestelmien nykytilannetta sekä mahdollisuuksien mukaan tulevaisuuden näkymiä. Työssä on käytetty lähdeaineistona kirjallisuutta, www-sivuja sekä haastatteluja. Työhön on haastateltu yksityisasiakkaita. Lämmitysjärjestelmien nykytilanteen ja tulevaisuuden näkymien sekä haastatteluissa esiin tulleiden asioiden avulla on pyritty kehittämään talotekniikkamarkkinoille uusia tuote- ja palvelukonsepteja. Diplomityössä on käsitelty lämmitysjärjestelmiä sekä talotekniikkaa markkinatilanteen ja asiakkaiden näkökulmasta. Tuloksena työssä esitetään alustava tuotteistussuunnitelma ja ideoita teknisen tilan kokonaispalvelun tuotteistamiseen.