An Analysis of the Implementation and Perceived Effectiveness of the SchoolMAX Family Portal

ABSTRACT Title of Document: AN ANALYSIS OF THE IMPLEMENTATION AND PERCEIVED EFFECTIVENESS OF THE SCHOOLMAX FAMILY PORTAL Warren Wesley Watts, Doctor of Education, 2015 Directed By: Margaret J. McLaughlin, Ph.D. Department of Counseling, Higher Education and Special Education School districts have spent millions of dollars implementing student information systems that offer family portals with web-based access to parents and students. One of the main purposes of these systems is to improve school-to-home communication. Research has shown that when school-to-home communication is implemented effectively, parent involvement improves and student achievement increases (Epstein, 2001). The purpose of the study was to (a) understand why parents used or refrained from using the family portal and (b) determine what barriers to use might exist. To this end, this descriptive study identified the information parent users accessed in the SchoolMAX family portal, determined how frequently parents accessed the portal, and ascertained whether parents perceived an increase in communication with their children about academic matters after they began accessing the portal. Finally, the study sought to identify whether barriers existed that prevented parents from using the family portal. The inquiry employed three data sources to answer the aforementioned queries. These sources included (a) a survey sent electronically to 19,108 parents who registered online for the SchoolMAX family portal; (b) SchoolMAX portal usage data from the student information system for system usage between January 1, 2015 and June 30, 2015; and (c) a paper survey sent to 691 parents of students that had never used the SchoolMAX family portal in one elementary school, one middle school and one high school that were representative of other schools in the district. Survey results indicated that parents at all grade levels used the family portal. Usage data also confirmed that approximately 19% of the students had parents who monitored their progress through the family portal. Usage data also showed that parents were monitoring approximately 25% of students in secondary schools (6th – 12th grade) and 16% of students in elementary schools. Of the wide menu of resources available through the SchoolMAX family portal, parents used three areas most frequently: attendance, daily grades, and report cards. Approximately 70% of parents responded that their communication had improved with their children about academic matters since they started using the SchoolMAX family portal, and 90% of parents responded that the SchoolMAX family portal was an effective or somewhat effective tool. Parents also expressed interest in the addition of additional information to the SchoolMAX family portal. Specifically, the top three additions parents wanted to see included homework assignments, high stakes test scores, and graduation requirements. Parents also reported that 92% of them spoke to their children at least 2 to 3 times per week about academics. Due to the low response rate of the parent non-user survey, potential barriers to using the SchoolMAX family portal could not be addressed in this study. However, this issue may be a useful research topic in a future study. Keywords: school to home communication, student information systems, family portal, parent portal

THE PRICE SENSITIVITY OF DEMAND FOR HIGHER EDUCATION AMONG NON-TRADITIONAL STUDENTS

This dissertation examines the price sensitivity of demand for higher education among non-traditional students in the United States. Chapter 1 discusses the issues related to the demand for higher education. It presents the recent trends and reviews the literature addressing these issues. A major conclusion that emerges from this chapter is that the price sensitivity of demand for higher education appears to depend on the source of the variation in price and the characteristics of the students who face the price change. The baseline estimate for the price sensitivity of demand is that a $1,000 (in year 2000 dollars) decrease in tuition costs should result in a 4 percentage-point increase in enrollment for the traditional 18- to 24-year-old student. Chapter 2 examines the price sensitivity of demand for higher education for military spouses resulting from variation in tuition due to military-mandated moves across states. The data suggest that a $1,000 (in year 2000 dollars) decrease in the cost of 2-year schools is associated with a 1--1.5 percentage-point increase in the probability of attending college. This estimate is less than half the previous estimates due to in-state tuition price differences faced by the civilian 18- to 24-year-old population on a percentage-point basis. However, this represents a 7--10 percent increase for this population, and the magnitude of this metric is in line with previous estimates. This suggests tuition assistance can be an effective means of increasing enrollment for military spouses, but other barriers to education for this population may also need to be addressed. Chapter 3 examines the impact of a change in the tax treatment of savings set aside for higher education by those who decide to suspend their education and enter the workforce. The taxation of these funds appears to have increased the rate at which these funds are included in an employee's initial contract and the quantity of funds allocated. These results are counterintuitive if the tax preference was the primary reason for the savings plan. However, these results suggest the rationale for the savings plan was to offer targeted additional compensation to recruits with greater negotiating power. Taxation of funds previously set aside did not appear to have a statistically significant impact on their utilization. Point estimates of the price sensitivity of demand from changes in the out-of-pocket costs for higher education induced by the taxation of these funds were small and often not statistically significant. The results from this dissertation show responses to changes in the net cost of college that differ by the source of price variation and the population experiencing them. This is consistent with the previous literature. This dissertation contributes to the literature by providing estimates for the price sensitivity of demand for higher education to previously understudied non-traditional students.

UNPROVEN INNOVATION: IPADS IN K-12 ENVIRONMENTS

Nationally, the education sector spends more than 5 billion dollars annually on digital tools, “yet seldom are technology solutions factored into any viable equation for improving student academic achievement” (Moersch, 2014, p. ix). Consider the following case in point: In July 2014, Apple announced that in just 3 years, the company had sold more than13 million iPads to educational institutions worldwide (Cavanagh, 2014). Put into perspective, that represents more than 5.2 billion dollars spent by the education industry to purchase iPads, which is the equivalent of the annual salaries of 89,655 teachers (“High School Teacher: Salary,” 2014). Despite such vast expenditures, there have been very few attempts to evaluate the efficacy of these digital tools on improving academic achievement. This research involved a quantitative data review of participant (student and teacher) survey data to explore one of the country’s largest K-12 iPad implementation undertakings in an effort to identify (a) best practices and (b) lessons learned from implementing the iPad into K-12 educational environments. It should be noted that the school system forming the basis of this research already had administered and collated the surveys used in this study.

Les caisses d'entraide économique

Depuis l'année 1960, jusqu'au début des années '90, une institution financière, dite coopérative, s'est imposée sur le marché au Québec, accumulant durant cette période près de un milliard et demi de dollars (1 500 000 000,00 $) d'actifs. Presque jusqu'à sa "mort" coopérative, elle a connu des taux de croissance atteignant soixante pourcent (60%) par année. Beaucoup de personnes ont perdu des sommes importantes dans cette galère. L'image des coopératives en a pris pour son rhume et n'eût été du Mouvement Desjardins, nous doutons fort que la coopération aujourd'hui encore bénéficierait des mêmes appuis! Cette institution financière se nomme : le mouvement des caisses d'entraide économique. Pour éviter une situation semblable dans l'avenir, nous croyons pertinent de faire un retour dans le passé et d'analyser les comportements que ces caisses privilégiaient. À la lecture de ce travail, certains seront surpris de connaître les méthodes utilisées par elles et, à notre avis, le peu de dimension coopérative qu'on apportait avec les membres. Leur "faillite technique" en '81 a obligé le Gouvernement du Québec à réagir en conséquence. C'est alors que fut créé au Ministère des Institutions Financières un service d'inspection opérant avec des règles et des suivis relativement élaborés. On se rappelle qu'à cette époque aussi plusieurs banques à charte canadiennes ont connu des problèmes financiers majeurs, nécessitant l'intervention de l'État fédéral. Il a donc fallu des situations critiques avant qu'on apporte les correctifs requis, et cela même si le gouvernement de l'époque savait par un rapport secret depuis 1978, l'existence d'un problème potentiel! En 1979, alors que nous étions à l'emploi du Mouvement Desjardins, nous nous sommes intéressés à leurs techniques de ventes et à leur fonctionnement parce que certains dirigeants, gestionnaires et recruteurs des Caisses d'Entraide Économique laissaient courir le bruit que leur réseau était regroupé avec le Mouvement Desjardins, et aussi parce que leur agressivité causait des saignées de fonds très importantes dans les caisses populaires. On profitait ainsi de la grande crédibilité et confiance accordées à Desjardins pour accroître les ventes de leurs plans d'épargne. En collaboration avec certaines fédérations, nous avons compilé plusieurs informations pour fins d'analyse et de compréhension de leur système. Peu de temps après le début de ce travail, des problèmes majeurs au niveau de la liquidité, de la sécurité des fonds et de privilèges accordés à certains de leurs membres ont été soulevés au réseau TVA. Dès lors, étant donné la précarité de leur système financier, les membres n'avaient plus accès à leurs épargnes. La confiance en cette institution financière fut détruite presque sur le coup. […]

Development of ultra-high-performance concrete (UHPC) using waste glass materials ─ towards innovative eco-friendly concrete

Le béton conventionnel (BC) a de nombreux problèmes tels que la corrosion de l’acier d'armature et les faibles résistances des constructions en béton. Par conséquent, la plupart des structures fabriquées avec du BC exigent une maintenance fréquent. Le béton fibré à ultra-hautes performances (BFUP) peut être conçu pour éliminer certaines des faiblesses caractéristiques du BC. Le BFUP est défini à travers le monde comme un béton ayant des propriétés mécaniques, de ductilité et de durabilité supérieures. Le BFUP classique comprend entre 800 kg/m³ et 1000 kg/m³ de ciment, de 25 à 35% massique (%m) de fumée de silice (FS), de 0 à 40%m de poudre de quartz (PQ) et 110-140%m de sable de quartz (SQ) (les pourcentages massiques sont basés sur la masse totale en ciment des mélanges). Le BFUP contient des fibres d'acier pour améliorer sa ductilité et sa résistance aux efforts de traction. Les quantités importantes de ciment utilisées pour produire un BFUP affectent non seulement les coûts de production et la consommation de ressources naturelles comme le calcaire, l'argile, le charbon et l'énergie électrique, mais affectent également négativement les dommages sur l'environnement en raison de la production substantielle de gaz à effet de serre dont le gas carbonique (CO[indice inférieur 2]). Par ailleurs, la distribution granulométrique du ciment présente des vides microscopiques qui peuvent être remplis avec des matières plus fines telles que la FS. Par contre, une grande quantité de FS est nécessaire pour combler ces vides uniquement avec de la FS (25 à 30%m du ciment) ce qui engendre des coûts élevés puisqu’il s’agit d’une ressource limitée. Aussi, la FS diminue de manière significative l’ouvrabilité des BFUP en raison de sa surface spécifique Blaine élevée. L’utilisation du PQ et du SQ est également coûteuse et consomme des ressources naturelles importantes. D’ailleurs, les PQ et SQ sont considérés comme des obstacles pour l’utilisation des BFUP à grande échelle dans le marché du béton, car ils ne parviennent pas à satisfaire les exigences environnementales. D’ailleurs, un rapport d'Environnement Canada stipule que le quartz provoque des dommages environnementaux immédiats et à long terme en raison de son effet biologique. Le BFUP est généralement vendu sur le marché comme un produit préemballé, ce qui limite les modifications de conception par l'utilisateur. Il est normalement transporté sur de longues distances, contrairement aux composantes des BC. Ceci contribue également à la génération de gaz à effet de serre et conduit à un coût plus élevé du produit final. Par conséquent, il existe le besoin de développer d’autres matériaux disponibles localement ayant des fonctions similaires pour remplacer partiellement ou totalement la fumée de silice, le sable de quartz ou la poudre de quartz, et donc de réduire la teneur en ciment dans BFUP, tout en ayant des propriétés comparables ou meilleures. De grandes quantités de déchets verre ne peuvent pas être recyclées en raison de leur fragilité, de leur couleur, ou des coûts élevés de recyclage. La plupart des déchets de verre vont dans les sites d'enfouissement, ce qui est indésirable puisqu’il s’agit d’un matériau non biodégradable et donc moins respectueux de l'environnement. Au cours des dernières années, des études ont été réalisées afin d’utiliser des déchets de verre comme ajout cimentaire alternatif (ACA) ou comme granulats ultrafins dans le béton, en fonction de la distribution granulométrique et de la composition chimique de ceux-ci. Cette thèse présente un nouveau type de béton écologique à base de déchets de verre à ultra-hautes performances (BEVUP) développé à l'Université de Sherbrooke. Les bétons ont été conçus à l’aide de déchets verre de particules de tailles variées et de l’optimisation granulaire de la des matrices granulaires et cimentaires. Les BEVUP peuvent être conçus avec une quantité réduite de ciment (400 à 800 kg/m³), de FS (50 à 220 kg/m³), de PQ (0 à 400 kg/m³), et de SQ (0-1200 kg/m³), tout en intégrant divers produits de déchets de verre: du sable de verre (SV) (0-1200 kg/m³) ayant un diamètre moyen (d[indice inférieur 50]) de 275 µm, une grande quantité de poudre de verre (PV) (200-700 kg/m³) ayant un d50 de 11 µm, une teneur modérée de poudre de verre fine (PVF) (50-200 kg/m³) avec d[indice inférieur] 50 de 3,8 µm. Le BEVUP contient également des fibres d'acier (pour augmenter la résistance à la traction et améliorer la ductilité), du superplastifiants (10-60 kg/m³) ainsi qu’un rapport eau-liant (E/L) aussi bas que celui de BFUP. Le remplacement du ciment et des particules de FS avec des particules de verre non-absorbantes et lisse améliore la rhéologie des BEVUP. De plus, l’utilisation de la PVF en remplacement de la FS réduit la surface spécifique totale nette d’un mélange de FS et de PVF. Puisque la surface spécifique nette des particules diminue, la quantité d’eau nécessaire pour lubrifier les surfaces des particules est moindre, ce qui permet d’obtenir un affaissement supérieur pour un même E/L. Aussi, l'utilisation de déchets de verre dans le béton abaisse la chaleur cumulative d'hydratation, ce qui contribue à minimiser le retrait de fissuration potentiel. En fonction de la composition des BEVUP et de la température de cure, ce type de béton peut atteindre des résistances à la compression allant de 130 à 230 MPa, des résistances à la flexion supérieures à 20 MPa, des résistances à la traction supérieure à 10 MPa et un module d'élasticité supérieur à 40 GPa. Les performances mécaniques de BEVUP sont améliorées grâce à la réactivité du verre amorphe, à l'optimisation granulométrique et la densification des mélanges. Les produits de déchets de verre dans les BEVUP ont un comportement pouzzolanique et réagissent avec la portlandite générée par l'hydratation du ciment. Cependant, ceci n’est pas le cas avec le sable de quartz ni la poudre de quartz dans le BFUP classique, qui réagissent à la température élevée de 400 °C. L'addition des déchets de verre améliore la densification de l'interface entre les particules. Les particules de déchets de verre ont une grande rigidité, ce qui augmente le module d'élasticité du béton. Le BEVUP a également une très bonne durabilité. Sa porosité capillaire est très faible, et le matériau est extrêmement résistant à la pénétration d’ions chlorure (≈ 8 coulombs). Sa résistance à l'abrasion (indice de pertes volumiques) est inférieure à 1,3. Le BEVUP ne subit pratiquement aucune détérioration aux cycles de gel-dégel, même après 1000 cycles. Après une évaluation des BEVUP en laboratoire, une mise à l'échelle a été réalisée avec un malaxeur de béton industriel et une validation en chantier avec de la construction de deux passerelles. Les propriétés mécaniques supérieures des BEVUP a permis de concevoir les passerelles avec des sections réduites d’environ de 60% par rapport aux sections faites de BC. Le BEVUP offre plusieurs avantages économiques et environnementaux. Il réduit le coût de production et l’empreinte carbone des structures construites de béton fibré à ultra-hautes performances (BFUP) classique, en utilisant des matériaux disponibles localement. Il réduit les émissions de CO[indice inférieur 2] associées à la production de clinkers de ciment (50% de remplacement du ciment) et utilise efficacement les ressources naturelles. De plus, la production de BEVUP permet de réduire les quantités de déchets de verre stockés ou mis en décharge qui causent des problèmes environnementaux et pourrait permettre de sauver des millions de dollars qui pourraient être dépensés dans le traitement de ces déchets. Enfin, il offre une solution alternative aux entreprises de construction dans la production de BFUP à moindre coût.

Del sacrificio al ocio en Jalisco, México

El turismo religioso, turismo en espacios religiosos o las peregrinaciones, han crecido considerablemente, más de 30 millones de personas se desplazan anualmente en México sólo por motivación religiosa y se estima una derrama económica de 680 millones de dólares. Este trabajo pretende establecer la motivación de la visita de santuarios en seis localidades del estado de Jalisco y analizar si se relaciona con la idea de sacrificio y fe del peregrino o con el ocio y placer del turista dedicado a la experiencia y vivencia del fenómeno religiosos, así como el grado de transición entre recinto religioso y atractivo turístico., desde una perspectiva del turismo cultural, lo que enfrenta la idea de un turismo alternativo. Se puede afirmar que en Jalisco, con relación al turismo religioso, predomina la condición de peregrino (sacrificio) en los visitantes y los espacios sacros y sus contenidos culturales aún cumplen la función de generar entornos propicios para la veneración, la contemplación y la adoración.

Scheduling of track inspection and maintenance activities in railroad networks

The U.S. railroad companies spend billions of dollars every year on railroad track maintenance in order to ensure safety and operational efficiency of their railroad networks. Besides maintenance costs, other costs such as train accident costs, train and shipment delay costs and rolling stock maintenance costs are also closely related to track maintenance activities. Optimizing the track maintenance process on the extensive railroad networks is a very complex problem with major cost implications. Currently, the decision making process for track maintenance planning is largely manual and primarily relies on the knowledge and judgment of experts. There is considerable potential to improve the process by using operations research techniques to develop solutions to the optimization problems on track maintenance. In this dissertation study, we propose a range of mathematical models and solution algorithms for three network-level scheduling problems on track maintenance: track inspection scheduling problem (TISP), production team scheduling problem (PTSP) and job-to-project clustering problem (JTPCP). TISP involves a set of inspection teams which travel over the railroad network to identify track defects. It is a large-scale routing and scheduling problem where thousands of tasks are to be scheduled subject to many difficult side constraints such as periodicity constraints and discrete working time constraints. A vehicle routing problem formulation was proposed for TISP, and a customized heuristic algorithm was developed to solve the model. The algorithm iteratively applies a constructive heuristic and a local search algorithm in an incremental scheduling horizon framework. The proposed model and algorithm have been adopted by a Class I railroad in its decision making process. Real-world case studies show the proposed approach outperforms the manual approach in short-term scheduling and can be used to conduct long-term what-if analyses to yield managerial insights. PTSP schedules capital track maintenance projects, which are the largest track maintenance activities and account for the majority of railroad capital spending. A time-space network model was proposed to formulate PTSP. More than ten types of side constraints were considered in the model, including very complex constraints such as mutual exclusion constraints and consecution constraints. A multiple neighborhood search algorithm, including a decomposition and restriction search and a block-interchange search, was developed to solve the model. Various performance enhancement techniques, such as data reduction, augmented cost function and subproblem prioritization, were developed to improve the algorithm. The proposed approach has been adopted by a Class I railroad for two years. Our numerical results show the model solutions are able to satisfy all hard constraints and most soft constraints. Compared with the existing manual procedure, the proposed approach is able to bring significant cost savings and operational efficiency improvement. JTPCP is an intermediate problem between TISP and PTSP. It focuses on clustering thousands of capital track maintenance jobs (based on the defects identified in track inspection) into projects so that the projects can be scheduled in PTSP. A vehicle routing problem based model and a multiple-step heuristic algorithm were developed to solve this problem. Various side constraints such as mutual exclusion constraints and rounding constraints were considered. The proposed approach has been applied in practice and has shown good performance in both solution quality and efficiency.

Minimalist Hardware Architectures for Agent Tracking and Guidance

The philosophy of minimalism in robotics promotes gaining an understanding of sensing and computational requirements for solving a task. This minimalist approach lies in contrast to the common practice of first taking an existing sensory motor system, and only afterwards determining how to apply the robotic system to the task. While it may seem convenient to simply apply existing hardware systems to the task at hand, this design philosophy often proves to be wasteful in terms of energy consumption and cost, along with unnecessary complexity and decreased reliability. While impressive in terms of their versatility, complex robots such as the PR2 (which cost hundreds of thousands of dollars) are impractical for many common applications. Instead, if a specific task is required, sensing and computational requirements can be determined specific to that task, and a clever hardware implementation can be built to accomplish the task. Since this minimalist hardware would be designed around accomplishing the specified task, significant reductions in hardware complexity can be obtained. This can lead to huge advantages in battery life, cost, and reliability. Even if cost is of no concern, battery life is often a limiting factor in many applications. Thus, a minimalist hardware system is critical in achieving the system requirements. In this thesis, we will discuss an implementation of a counting, tracking, and actuation system as it relates to ergodic bodies to illustrate a minimalist design methodology.

Avances y desafíos de la agenda de cambio climático en la Zona Costero-Marina de El Salvador

Central America is one of the most vulnerable regions to the adverse effects of climate change, due to the rise of frequency and intensity that hydrometeorological phenomena have occurred in recent years. In El Salvador 484 people died and 800,000 more were affected because these extreme events and economic losses reached up to 6.711 million dollars. According to the climate projections over the next 50 years in the territory, is expected that extreme events such as droughts and rainfall will intensify. Within the last 30 years, July of 2014 is considered the one with less rainfall. Meanwhile, Tropical Depression 12E in 2011 provoked an outstanding rainfall average of 1,137 mm, affecting more than 500,000 people; most of them live in the coastal zone. The death of 34 people and living economic losses of 840.4 million was recorded, equivalent to 4% of GDP. El Salvador has policies, national plans and strategies aimed to reducing vulnerability, promoting adaptation to these changes and more effective risk management. This paper compiles the impacts of climate variability in El Salvador and the efforts of the State on adaptation to improve environmental and social resilience.

"Last-Mile" preparation for a potential disaster - Interdisciplinary approach towards tsunami early warning and an evacuation information system for the coastal city of Padang, Indonesia

Extreme natural events, like e.g. tsunamis or earthquakes, regularly lead to catastrophes with dramatic consequences. In recent years natural disasters caused hundreds of thousands of deaths, destruction of infrastructure, disruption of economic activity and loss of billions of dollars worth of property and thus revealed considerable deficits hindering their effective management: Needs for stakeholders, decision-makers as well as for persons concerned include systematic risk identification and evaluation, a way to assess countermeasures, awareness raising and decision support systems to be employed before, during and after crisis situations. The overall goal of this study focuses on interdisciplinary integration of various scientific disciplines to contribute to a tsunami early warning information system. In comparison to most studies our focus is on high-end geometric and thematic analysis to meet the requirements of smallscale, heterogeneous and complex coastal urban systems. Data, methods and results from engineering, remote sensing and social sciences are interlinked and provide comprehensive information for disaster risk assessment, management and reduction. In detail, we combine inundation modeling, urban morphology analysis, population assessment, socioeconomic analysis of the population and evacuation modeling. The interdisciplinary results eventually lead to recommendations for mitigation strategies in the fields of spatial planning or coping capacity. © Author(s) 2009.

Incidencia de las transferencias de remesas que se realizan a través de la Cooperativa Jardín Azuayo, en la expansión y democratización del crédito en la provincia del Azuay durante el período 2008-200|4

Históricamente, en el Ecuador, la Provincia del Azuay es la de mayor experiencia emigratoria hacia el exterior y la que se ha beneficiado de importantes flujos de remesas, mismas que se incrementaron notablementecon la emigración provocada por la crisis económica de finales de la década de los noventa, llegando a representar en el año 2014 USD$ 540 millones de dólares. Esto, sumado a la desconfianza en el sector bancario, generó el nacimiento y crecimiento de muchas Cooperativas de Ahorro y Crédito como es el caso de Jardín Azuayo, que se constituyó en el año 1993 a raíz del desastre de la Josefina. Además, las remesas que se transfieren a través de las cooperativas tienen un notable incremento, contribuyendo los aspectos mencionados a la expansión y democratización del crédito, y al desarrollo de la provincia. En la presente investigación se utilizó información secundaria, proveniente de la Superintendencia de Bancos y Seguros, Superintendencia de Economía Popular y Solidaria, Banco Central del Ecuador, Instituto Nacional de Estadísticas y Censos, Cooperativa de Ahorro y Crédito Jardín Azuayo, entre otros. Además se trabajó con una muestra de créditos concedidos por la Cooperativa Jardín Azuayo. Los resultados obtenidos permiten visualizar la expansión democratización del crédito yel verdadero destino de éste y proporcionan los elementos para el establecimiento de políticas que permitan el apoyo a las Cooperativas y a los sectores que requieren el financiamiento, especialmente para fines productivos.

Health spending, illicit financial flows and tax incentives in Malawi

This analysis examines the gaps in health care financing in Malawi and how foregone taxes could fill these gaps. It begins with an assessment of the disease burden and government health expenditure. Then it analyses the tax revenues foregone by the government of Malawi by two main routes • Illicit financial flows (IFF) from the country • Tax incentives. We find that there are significant financing gaps in the health sector; for example, government expenditure is United States Dollars (USD) 177 million for 2013/2014 while projected donor contribution in 2013/2014 is USD 207 million and the total cost for the minimal health package is USD 535 million. Thus the funding gap between the government budget for health and the required spending to provide the minimal package for 2013/2014 is USD 358 million. On the other hand we estimate that almost USD 400million is lost through IFF and corporate utilization of tax incentives each year. The revenues foregone plus the current government health spending would be sufficient to cover the minimal public health package for all Malawians and would help tackle Malawi’s disease burden. Every effort must be made, including improving transparency and revising laws, to curtail IFF and moderate tax incentives.

Application of a policy framework for the public funding of drugs for rare diseases

BACKGROUND: In many countries, decisions about the public funding of drugs are preferentially based on the results of randomized trials. For truly rare diseases, such trials are not typically available, and approaches by public payers are highly variable. In view of this, a policy framework intended to fairly evaluate these drugs was developed by the Drugs for Rare Diseases Working Group (DRDWG) at the request of the Ontario Public Drug Programs. OBJECTIVE: To report the initial experience of applying a novel evaluation framework to funding applications for drugs for rare diseases. METHODS: Retrospective observational cohort study. MEASURES: Clinical effectiveness, costs, funding recommendations, funding approval. KEY RESULTS: Between March 2008 and February 2013, eight drugs were evaluated using the DRDWG framework. The estimated average annual drug cost per patient ranged from 28,000 to 1,200,000 Canadian dollars (CAD). For five drugs, full evaluations were completed, specific funding recommendations were made by the DRDWG, and funding was approved after risk-sharing agreements with the manufacturers were negotiated. For two drugs, the disease indications were determined to be ineligible for consideration. For one drug, there was insufficient natural history data for the disease to provide a basis for recommendation. For the five drugs fully evaluated, 32 patients met the predefined eligibility criteria for funding, and five were denied based on predefined exclusion criteria. CONCLUSIONS: The framework improved transparency and consistency for evaluation and public funding of drugs for rare diseases in Ontario. The evaluation process will continue to be iteratively refined as feedback on actual versus expected clinical and economic outcomes is incorporated. © 2014 Society of General Internal Medicine.

Estimação e compensação de não linearidades inerentes aos atuadores dos processos industriais

The oscillations presents in control loops can cause damages in petrochemical industry. Canceling, or even preventing such oscillations, would save up to large amount of dollars. Studies have identified that one of the causes of these oscillations are the nonlinearities present on industrial process actuators. This study has the objective to develop a methodology for removal of the harmful effects of nonlinearities. Will be proposed an parameter estimation method to Hammerstein model, whose nonlinearity is represented by dead-zone or backlash. The estimated parameters will be used to construct inverse models of compensation. A simulated level system was used as a test platform. The valve that controls inflow has a nonlinearity. Results and describing function analysis show an improvement on system response

Uso de espectrometria de massa por ionização e dessorção a laser assistida por matriz : tempo de voo (MALDI-TOF MS) para formação de bibliotecas e caracterização da ocupação nodular em soja por estirpes de Bradyrhizobium

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Programa de Pós-Graduação em Biologia Microbiana, 2016.