Application of low temperature plasmas for restoration/conservation of archaeological objects

The low-temperature low-pressure hydrogen based plasmas were used to study the influence of processes and discharge conditions on corrosion removal. The capacitive coupled RF discharge in the continuous or pulsed regime was used at operating pressure of 100-200 Pa. Plasma treatment was monitored by optical emission spectroscopy. To be able to study influence of various process parameters, the model corroded samples with and without sandy incrustation were prepared. The SEM-EDX analyzes were carried out to verify corrosion removal efficiency. Experimental conditions were optimized for the selected most frequent materials of original metallic archaeological objects (iron, bronze, copper, and brass). Chlorides removal is based on hydrogen ion reactions while oxides are removed mainly by neutral species interactions. A special focus was kept for the samples temperature because it was necessary to avoid any metallographic changes in the material structure. The application of higher power pulsed regime with low duty cycle seems be the best treatment regime. The low pressure hydrogen plasma is not applicable for objects with a very broken structure or for nonmetallic objects due to the non-uniform heat stress. Due to this fact, the new developed plasmas generated in liquids were applied on selected original archaeological glass materials.

Understanding changes in mobility & subsistence from terminal Pleistocene to Late Holocene in the highlands of New Guinea through intensity of lithic reduction, changing site types, and paleoclimate

Thesis (Ph.D.)--University of Washington, 2016-08

Finite element modeling of straightening of thin-walled seamless tubes of austenitic stainless steel

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

Finite element analysis of hot rolling in the blooming mill

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

Development of a model to predict the life of pneumatic conveyor bends subject to erosive wear

The erosion processes resulting from flow of fluids (gas-solid or liquid-solid) are encountered in nature and many industrial processes. The common feature of these erosion processes is the interaction of the fluid (particle) with its boundary thus resulting in the loss of material from the surface. This type of erosion in detrimental to the equipment used in pneumatic conveying systems. The puncture of pneumatic conveyor bends in industry causes several problems. Some of which are: (1) Escape of the conveyed product causing health and dust hazard; (2) Repairing and cleaning up after punctures necessitates shutting down conveyors, which will affect the operation of the plant, thus reducing profitability. The most common occurrence of process failure in pneumatic conveying systems is when pipe sections at the bends wear away and puncture. The reason for this is particles of varying speed, shape, size and material properties strike the bend wall with greater intensity than in straight sections of the pipe. Currently available models for predicting the lifetime of bends are inaccurate (over predict by 80%. The provision of an accurate predictive method would lead to improvements in the structure of the planned maintenance programmes of processes, thus reducing unplanned shutdowns and ultimately the downtime costs associated with these unplanned shutdowns. This is the main motivation behind the current research. The paper reports on two aspects of the first phases of the study-undertaken for the current project. These are (1) Development and implementation; and (2) Testing of the modelling environment. The model framework encompasses Computational Fluid Dynamics (CFD) related engineering tools, based on Eulerian (gas) and Lagrangian (particle) approaches to represent the two distinct conveyed phases, to predict the lifetime of conveyor bends. The method attempts to account for the effect of erosion on the pipe wall via particle impacts, taking into account the angle of attack, impact velocity, shape/size and material properties of the wall and conveyed material, within a CFD framework. Only a handful of researchers use CFD as the basis of predicting the particle motion, see for example [1-4] . It is hoped that this would lead to more realistic predictions of the wear profile. Results, for two, three-dimensional test cases using the commercially available CFD PHOENICS are presented. These are reported in relation to the impact intensity and sensitivity to the inlet particle distributions.

Nanostructured catalysts for the development of the hydrogen economy

La catalyse joue un rôle essentiel dans de nombreuses applications industrielles telles que les industries pétrochimique et biochimique, ainsi que dans la production de polymères et pour la protection de l’environnement. La conception et la fabrication de catalyseurs efficaces et rentables est une étape importante pour résoudre un certain nombre de problèmes des nouvelles technologies de conversion chimique et de stockage de l’énergie. L’objectif de cette thèse est le développement de voies de synthèse efficaces et simples pour fabriquer des catalyseurs performants à base de métaux non nobles et d’examiner les aspects fondamentaux concernant la relation entre structure/composition et performance catalytique, notamment dans des processus liés à la production et au stockage de l’hydrogène. Dans un premier temps, une série d’oxydes métalliques mixtes (Cu/CeO2, CuFe/CeO2, CuCo/CeO2, CuFe2O4, NiFe2O4) nanostructurés et poreux ont été synthétisés grâce à une méthode améliorée de nanocasting. Les matériaux Cu/CeO2 obtenus, dont la composition et la structure poreuse peuvent être contrôlées, ont ensuite été testés pour l’oxydation préférentielle du CO dans un flux d’hydrogène dans le but d’obtenir un combustible hydrogène de haute pureté. Les catalyseurs synthétisés présentent une activité et une sélectivité élevées lors de l’oxydation sélective du CO en CO2. Concernant la question du stockage d’hydrogène, une voie de synthèse a été trouvée pour le composét mixte CuO-NiO, démontrant une excellente performance catalytique comparable aux catalyseurs à base de métaux nobles pour la production d’hydrogène à partir de l’ammoniaborane (aussi appelé borazane). L’activité catalytique du catalyseur étudié dans cette réaction est fortement influencée par la nature des précurseurs métalliques, la composition et la température de traitement thermique utilisées pour la préparation du catalyseur. Enfin, des catalyseurs de Cu-Ni supportés sur silice colloïdale ou sur des particules de carbone, ayant une composition et une taille variable, ont été synthétisés par un simple procédé d’imprégnation. Les catalyseurs supportés sur carbone sont stables et très actifs à la fois dans l’hydrolyse du borazane et la décomposition de l’hydrazine aqueuse pour la production d’hydrogène. Il a été démontré qu’un catalyseur optimal peut être obtenu par le contrôle de l’effet bi-métallique, l’interaction métal-support, et la taille des particules de métal.

Development of a Real Time System in Algol 68.

For various reasons, many Algol 68 compilers do not directly implement the parallel processing operations defined in the Revised Algol 68 Report. It is still possible however, to perform parallel processing, multitasking and simulation provided that the implementation permits the creation of a master routine for the coordination and initiation of processes under its control. The package described here is intended for real time applications and runs in conjunction with the Algol 68R system; it extends and develops the original Algol 68RT package, which was designed for use with multiplexers at the Royal Radar Establishment, Malvern. The facilities provided, in addition to the synchronising operations, include an interface to an ICL Communications Processor enabling the abstract processes to be realised as the interaction of several teletypes or visual display units with a real time program providing a useful service.

Electronic Redesign of an Industrial Lift

This project, realized at the company ABER Ltd, describes the process followed for the developing of an electronic control system for a hydraulic elevator. The previous control system was based on relay logic, and the company wanted to change it to a microcontroller based technology. To do so, different approaches were studied and finally the selected technology for the development was the Raspberry Pi. After, the software needed for all the elevator types was developed, and the interface hardware was selected. In the end, several test were made to adjust the software and the hardware and to prove the good operation of the system.

The principle of least effort within the hierarchy of linguistic preferences: external evidence from English

The thesis is an investigation of the principle of least effort (Zipf 1949 [1972]). The principle is simple (all effort should be least) and universal (it governs the totality of human behavior). Since the principle is also functional, the thesis adopts a functional theory of language as its theoretical framework, i.e. Natural Linguistics. The explanatory system of Natural Linguistics posits that higher principles govern preferences, which, in turn, manifest themselves as concrete, specific processes in a given language. Therefore, the thesis’ aim is to investigate the principle of least effort on the basis of external evidence from English. The investigation falls into the three following strands: the investigation of the principle itself, the investigation of its application in articulatory effort and the investigation of its application in phonological processes. The structure of the thesis reflects the division of its broad aims. The first part of the thesis presents its theoretical background (Chapter One and Chapter Two), the second part of the thesis deals with application of least effort in articulatory effort (Chapter Three and Chapter Four), whereas the third part discusses the principle of least effort in phonological processes (Chapter Five and Chapter Six). Chapter One serves as an introduction, examining various aspects of the principle of least effort such as its history, literature, operation and motivation. It overviews various names which denote least effort, explains the origins of the principle and reviews the literature devoted to the principle of least effort in a chronological order. The chapter also discusses the nature and operation of the principle, providing numerous examples of the principle at work. It emphasizes the universal character of the principle from the linguistic field (low-level phonetic processes and language universals) and the non-linguistic ones (physics, biology, psychology and cognitive sciences), proving that the principle governs human behavior and choices. Chapter Two provides the theoretical background of the thesis in terms of its theoretical framework and discusses the terms used in the thesis’ title, i.e. hierarchy and preference. It justifies the selection of Natural Linguistics as the thesis’ theoretical framework by outlining its major assumptions and demonstrating its explanatory power. As far as the concepts of hierarchy and preference are concerned, the chapter provides their definitions and reviews their various understandings via decision theories and linguistic preference-based theories. Since the thesis investigates the principle of least effort in language and speech, Chapter Three considers the articulatory aspect of effort. It reviews the notion of easy and difficult sounds and discusses the concept of articulatory effort, overviewing its literature as well as various understandings in a chronological fashion. The chapter also presents the concept of articulatory gestures within the framework of Articulatory Phonology. The thesis’ aim is to investigate the principle of least effort on the basis of external evidence, therefore Chapters Four and Six provide evidence in terms of three experiments, text message studies (Chapter Four) and phonological processes in English (Chapter Six). Chapter Four contains evidence for the principle of least effort in articulation on the basis of experiments. It describes the experiments in terms of their predictions and methodology. In particular, it discusses the adopted measure of effort established by means of the effort parameters as well as their status. The statistical methods of the experiments are also clarified. The chapter reports on the results of the experiments, presenting them in a graphical way and discusses their relation to the tested predictions. Chapter Four establishes a hierarchy of speakers’ preferences with reference to articulatory effort (Figures 30, 31). The thesis investigates the principle of least effort in phonological processes, thus Chapter Five is devoted to the discussion of phonological processes in Natural Phonology. The chapter explains the general nature and motivation of processes as well as the development of processes in child language. It also discusses the organization of processes in terms of their typology as well as the order in which processes apply. The chapter characterizes the semantic properties of processes and overviews Luschützky’s (1997) contribution to NP with respect to processes in terms of their typology and incorporation of articulatory gestures in the concept of a process. Chapter Six investigates phonological processes. In particular, it identifies the issues of lenition/fortition definition and process typology by presenting the current approaches to process definitions and their typology. Since the chapter concludes that no coherent definition of lenition/fortition exists, it develops alternative lenition/fortition definitions. The chapter also revises the typology of phonological processes under effort management, which is an extended version of the principle of least effort. Chapter Seven concludes the thesis with a list of the concepts discussed in the thesis, enumerates the proposals made by the thesis in discussing the concepts and presents some questions for future research which have emerged in the course of investigation. The chapter also specifies the extent to which the investigation of the principle of least effort is a meaningful contribution to phonology.

Identification and characterisation of telomere regulatory and signalling pathways after induction of telomere dysfunction

Telomeres are DNA-protein complexes which cap the ends of eukaryotic linear chromosomes. In normal somatic cells telomeres shorten and become dysfunctional during ageing due to the DNA end replication problem. This leads to activation of signalling pathways that lead to cellular senescence and apoptosis. However, cancer cells typically bypass this barrier to immortalisation in order to proliferate indefinitely. Therefore enhancing our understanding of telomere dysfunction and pathways involved in regulation of the process is essential. However, the pathways involved are highly complex and involve interaction between a wide range of biological processes. Therefore understanding how telomerase dysfunction is regulated is a challenging task and requires a systems biology approach. In this study I have developed a novel methodology for visualisation and analysis of gene lists focusing on the network level rather than individual or small lists of genes. Application of this methodology to an expression data set and a gene methylation data set allowed me to enhance my understanding of the biology underlying a senescence inducing drug and the process of immortalisation respectively. I then used the methodology to compare the effect of genetic background on induction of telomere uncapping. Telomere uncapping was induced in HCT116 WT, p21-/- and p53-/- cells using a viral vector expressing a mutant variant of hTR, the telomerase RNA template. p21-/- cells showed enhanced sensitivity to telomere uncapping. Analysis of a candidate pathway, Mismatch Repair, revealed a role for the process in response to telomere uncapping and that induction of the pathway was p21 dependent. The methodology was then applied to analysis of the telomerase inhibitor GRN163L and synergistic effects of hypoglycaemia with this drug. HCT116 cells were resistant to GRN163L treatment. However, under hypoglycaemic conditions the dose required for ablation of telomerase activity was reduced significantly and telomere shortening was enhanced. Overall this new methodology has allowed our group and collaborators to identify new biology and improve our understanding of processes regulating telomere dysfunction.

From Hardware Processes to asynchronous circuits via petri nets: An Application to Arbiter Design

International audience

Extensão universitária e associativismo popular : um estudo a partir da educação ambiental crítica

Partimos do pressuposto que a universidade pública é um bem do povo e deve servir aos interesses da sociedade, sobretudo aos interesses daqueles cuja vida é ameaçada mediante as condições desiguais sob as quais a sociedade capitalista se funda. Entendemos que a extensão universitária é uma atividade da universidade e deve, como ensino e pesquisa, ser reconhecida como produtora de conhecimentos e não por trabalhos assistenciais, como se caracteriza, na realidade concreta, a extensão universitária analisada nesta dissertação. Com base nisso, o trabalho que se segue discorre sobre a relação de dependência das associações populares, ligadas ao movimento da economia popular solidária à extensão da Universidade Federal do Rio Grande – FURG, especificamente aquela realizada pelo Núcleo de Desenvolvimento Social e Econômico – NUDESE-FURG, da região de Rio GrandeRS. O objetivo do trabalho foi conhecer a relação entre o núcleo e as associações, problematizando-a com base em alguns princípios da Educação Ambiental Crítica (diálogo, totalidade, relação teoria/prática e participação social). O referencial que sustenta o trabalho articula autores da sociologia do trabalho, economia da educação, ecologia política, geografia crítica, todos, de alguma forma, ligados ao materialismo histórico como perspectiva de análise. O trabalho se caracteriza como um estudo de caso, onde os principais recursos perpassaram pela análise de documentos e, fundamentalmente, as entrevistas gravadas e transcritas na íntegra, pelas quais nosso estudo se baseia. A análise do material foi feita a partir dos pressupostos da análise crítica do discurso, a qual busca entrelaçar os pronunciamentos dos sujeitos com a totalidade social na qual o discurso está inscrito, possibilitando o alcance do significado concreto. O estudo demonstra que a extensão universitária desenvolvida pelo NUDESE-FURG tem características assistencialistas, cuja consequência prática é a realização de atividades para os trabalhadores associados (principalmente elaboração e gestão de projetos), impedindo que as associações desenvolvam suas ações sem depender do núcleo. Além disso, ao assumir recursos financeiros oriundos de projetos (via editais), as associações apenas transferem para o Estado a condição de dependência do intermediário, o que não extingue o problema, mas reafirma-o. Por isso, entendemos que a Educação Ambiental Crítica oferece, por meio dos princípios que utilizamos, um instrumento crítico importante ao estudo de processos e políticas que buscam a emancipação dos sujeitos. Isso porque, também, ao reconhecer a crise socioambiental que vivemos, fruto do modo de produção capitalista, dos conflitos existentes na sociedade (portanto dos diferentes interesses, concepções e valores em disputa), pela apropriação da riqueza produzida, podem-se possibilitar conhecimentos úteis dos trabalhadores das associações. Para que isso aconteça, defendemos o encontro da extensão universitária do NUDESE-FURG com a Educação Ambiental Crítica, caso a emancipação, de fato, esteja no horizonte das práticas deste núcleo, já que pelo estudo, nesta pesquisa, predomina dependência de tais grupos do NUDESE-FURG.

O Eu neuropsíquico : Ensaio sobre a consciência

Tese de Doutoramento em Psicologia Clínica apresentada ao ISPA - Instituto Universitário

Recrutamento e selecção na Tap Portugal

Mestrado em Gestão de Recursos Humanos

Novas tendências de gestão pública : a implementação de um programa de avaliação e desenvolvimento de competências numa unidade de serviços partilhados

É hoje consensual, entre as várias correntes da gestão, que a obtenção de vantagens competitivas depende em grande medida das estratégias de gestão de recursos humanos. Orientada para os aspectos estratégicos, a gestão por competências surge como uma abordagem capaz de integrar os objectivos das organizações com os objectivos individuais. Simultaneamente, as novas tendências da gestão pública apontam para a necessidade de desenvolver processos conducentes à melhoria contínua dos serviços prestados, introduzindo um maior rigor na informação de gestão. São princípios subjacentes a estas novas tendências a necessidade de redução de custos, o aumento da produtividade, a normalização de processos e sistemas e o desenvolvimento de centros de competência e inovação. Neste trabalho, de natureza essencialmente empírica, pretendemos ilustrar o processo de concepção e implementação de um Programa de Avaliação e Desenvolvimento de Competências que foi desenvolvido para uma Unidade de Serviços Partilhados, no âmbito de uma organização pública. ABSTRACT: lt is actually consensual between several theoretical approaches that the attainment of competitive advantages depends on strategies of human resource management. Guided for strategic aspects, competencies’ management appears as an approach capable of integrating organizations and individual's goals. Simultaneously, the new trends of public administration point out the necessity of developing continuous improvement processes, introducing a higher quality in the management information. The necessity of costs reduction, the increase of the productivity and the normalization of processes and systems, as well the development of competencies centers and innovation, are underlying principles to these new trends. ln this empirical work we intend to illustrate the process of conception and implementation of a Program of Evaluation and Development of Competencies, developed for a Unit of Shared Services, in a public organization.