810 resultados para connected representation
Resumo:
The present work consists on the development and exploration of a knowledge mapping model. It is aimed in presenting and testing that model in an exploratory manner for the operationalization in theoretical terms and its practical application. For this proposal, it approaches ¿knowledge management¿ by three dimensions of management: processes control, results control and leadership. Assuming the inherently personal character of knowledge and admitting the impossibility for the management to command the individuals knowledge mental processes, this study states the possibility for management to control the organizations information processes, to state and to monitor the objectives and to lead people. Therefore, the developed tool searches to graphically represent the people¿s knowledge, which becomes, consequently, information. Also it evaluates the individual¿s maturity against the identified knowledge and prescribes, according to the Situational Leadership Theory, a style of leadership in compliance with the respective maturities. The knowledge map considered here translates the graphical representation of the relevant knowledge that is said to reach the objectives of the organization. That fact allows the results management for two reasons: first, the knowledge items are directly or indirectly connected to an objective and second, the knowledge map developed indicates a importance grade of the identified knowledge for the main objective stated. The research strategy adopted to explore the model of knowledge mapping and to test its applicability, also identifying its possible contributions and limitations, is the Actionresearch. Following the research strategy¿s prescribed stages, the knowledge map, as considered by this study, was applied in a software development company to hospitals, clinics and restaurants management which is called ¿Tergus Systems and Consulting¿. More precisely, the knowledge map was applied in the customer support company¿s area for hospitals. The research¿s empirical evidences had concluded that the model is applicable with low level of complexity, but with great demand of time. The more important contributions are related to the identification of the relevant knowledge to the department objectives in set with a prescription of the knowledge capture and transference necessities, as well as, the orientation for the appropriate leadership style for each subordinate related to the knowledge item in question.
Resumo:
o tema pesquisado: "O trabalhador do Setor Terciário - sua representação do cotidiano, do trabalho e da sociedade" - é uma forma de explicitação de minha prática concreta. Compreender o terciário, a partir da ótica das relações de produção, para desvendar, ao nível da representação, como funciona o fetiche, ao nível através das explicações produzidas e do próprio discurso do trabalhador ligado a esta área de produção não material. Inicia-se por discutir as conjunturas brasileiras de trinta (1930) a oitenta (1980), para entender a oscilação entre o nacionalismo e o liberalismo econômico, entre o desenvolvimento nacional e o desenvolvimento associado ao capital estrangeiro. Estudam-se, neste contexto, diferentes explicações para a expansão do terciário, passando pela estrutura de ocupações, pelos seus efeitos marginais e pela divisão social do trabalho, onde o desenvolvimento e o subdesenvolvimento encontram sua funcionalidade no capitalismo em escala mundial. O estudo nos leva a compreender que todos estes acontecimentos de natureza sócio-econômica se refletem, não como relação mecânica, mas enquanto íntima articulação entre o sócio-político e o econômico. E esta indissociabilidade está viva na representação que o trabalhador faz do seu cotidiano, do trabalho e da sociedade, ainda que não se dê conta e que não possa desvendar o fetiche, o qual, no seu discurso e na sua consciência, revela e encobre a realidade ao mesmo tempo.
Resumo:
This thesis develops and evaluates a business model for connected full electric vehicles (FEV) for the European market. Despite a promoting political environment, various barriers have thus far prevented the FEV from becoming a mass-market vehicle. Besides cost, the most noteworthy of these barriers is represented by range anxiety, a product of FEVs’ limited range, lacking availability of charging infrastructure, and long recharging times. Connected FEVs, which maintain a constant connection to the surrounding infrastructure, appear to be a promising element to overcome drivers’ range anxiety. Yet their successful application requires a well functioning FEV ecosystem which can only be created through the collaboration of various stakeholders such as original equipment manufacturers (OEM), first tier suppliers (FTS), charging infrastructure and service providers (CISP), utilities, communication enablers, and governments. This thesis explores and evaluates how a business model, jointly created by these stakeholders, could look like, i.e. how stakeholders could collaborate in the design of products, services, infrastructure, and advanced mobility management, to meet drivers with a sensible value proposition that is at least equivalent to that of internal combustion engine (ICE) cars. It suggests that this value proposition will be an end-2-end package provided by CISPs or OEMs that comprises mobility packages (incl. pay per mile plans, battery leasing, charging and battery swapping (BS) infrastructure) and FEVs equipped with an on-board unit (OBU) combined with additional services targeted at range anxiety reduction. From a theoretical point of view the thesis answers the question which business model framework is suitable for the development of a holistic, i.e. all stakeholder-comprising business model for connected FEVs and defines such a business model. In doing so the thesis provides the first comprehensive business model related research findings on connected FEVs, as prior works focused on the much less complex scenario featuring only “offline” FEVs.
Resumo:
In this paper I will investigate the conditions under which a convex capacity (or a non-additive probability which exhibts uncertainty aversion) can be represented as a squeeze of a(n) (additive) probability measure associate to an uncertainty aversion function. Then I will present two alternatives forrnulations of the Choquet integral (and I will extend these forrnulations to the Choquet expected utility) in a parametric approach that will enable me to do comparative static exercises over the uncertainty aversion function in an easy way.
Resumo:
The research topic of this paper is focused on the analysis of how trade associations perceive lobbying in Brussels and in Brasília. The analysis will be centered on business associations located in Brasília and Brussels as the two core centers of decision-making and as an attraction for the lobbying practice. The underlying principles behind the comparison between Brussels and Brasilia are two. Firstof all because the European Union and Brazil have maintained diplomatic relations since 1960. Through these relations they have built up close historical, cultural, economic and political ties. Their bilateral political relations culminated in 2007 with the establishment of a Strategic Partnership (EEAS website,n.d.). Over the years, Brazil has become a key interlocutor for the EU and it is the most important market for the EU in Latin America (European Commission, 2007). Taking into account the relations between EU and Brazil, this research could contribute to the reciprocal knowledge about the perception of lobby in the respective systems and the importance of the non-market strategy when conducting business. Second both EU and Brazilian systems have a multi-level governance structure: 28 Member States in the EU and 26 Member States in Brazil; in both systems there are three main institutions targeted by lobbying practice. The objective is to compare how differences in the institutional environments affect the perception and practice of lobbying, where institutions are defined as ‘‘regulative, normative, and cognitive structures and activities that provide stability and meaning to social behavior’’ (Peng et al., 2009). Brussels, the self-proclaimed "Capital of Europe”, is the headquarters of the European Union and has one of the highest concentrations of political power in the world. Four of the seven Institutions of the European Union are based in Brussels: the European Parliament, the European Council, the Council and the European Commission (EU website, n.d.). As the power of the EU institutions has grown, Brussels has become a magnet for lobbyists, with the latest estimates ranging from between 15,000 and 30,000 professionals representing companies, industry sectors, farmers, civil society groups, unions etc. (Burson Marsteller, 2013). Brasília is the capital of Brazil and the seat of government of the Federal District and the three branches of the federal government of Brazilian legislative, executive and judiciary. The 4 city also hosts 124 foreign embassies. The presence of the formal representations of companies and trade associations in Brasília is very limited, but the governmental interests remain there and the professionals dealing with government affairs commute there. In the European Union, Brussels has established a Transparency Register that allows the interactions between the European institutions and citizen’s associations, NGOs, businesses, trade and professional organizations, trade unions and think tanks. The register provides citizens with a direct and single access to information about who is engaged in This process is important for the quality of democracy, and for its capacity to deliver adequate policies, matching activities aimed at influencing the EU decision-making process, which interests are being pursued and what level of resources are invested in these activities (Celgene, n.d). It offers a single code of conduct, binding all organizations and self-employed individuals who accept to “play by the rules” in full respect of ethical principles (EC website, n.d). A complaints and sanctions mechanism ensures the enforcement of the rules and addresses suspected breaches of the code. In Brazil, there is no specific legislation regulating lobbying. The National Congress is currently discussing dozens of bills that address regulation of lobbying and the action of interest groups (De Aragão, 2012), but none of them has been enacted for the moment. This work will focus on class lobbying (Oliveira, 2004), which refers to the performance of the federation of national labour or industrial unions, like CNI (National Industry Confederation) in Brazil and the European Banking Federation (EBF) in Brussels. Their performance aims to influence the Executive and Legislative branches in order to defend the interests of their affiliates. When representing unions and federations, class entities cover a wide range of different and, more often than not, conflicting interests. That is why they are limited to defending the consensual and majority interest of their affiliates (Oliveira, 2004). The basic assumption of this work is that institutions matter (Peng et al, 2009) and that the trade associations and their affiliates, when doing business, have to take into account the institutional and regulatory framework where they do business.
Resumo:
No mundo, hoje, tudo está em movimento. Pessoas, objetos, valores, informação e imagens circulam cada dia mais intensa e extensamente em um ambiente social fluido, em rede e de riscos. Quando a mobilidade torna-se parte importante da experiência cotidiana e os deslocamentos físicos, geográficos, virtuais ou imaginativos tomam a frente nas relações e alteram radicalmente os modos de vida em todas as esferas - social, cultural, política e econômica -, nesse momento uma cultura da mobilidade se impõe e envolve a todos em novas possibilidades e experiências, assim como, em novos constrangimentos, riscos e discursos que devem ser estudados. O cada dia mais intenso imbricamento entre a cultura da mobilidade e o discurso publicitário constitui a base que sustenta a tese e que delineia as duas premissas fundamentais do estudo: a primeira, de que as coisas do mundo chegam até o sujeito apesar de sua imobilidade, por meio dos objetos, das informações e das imagens que circulam globalmente; e, a segunda premissa, de que a despeito de seu caráter comercial, persuasivo e de vendas, a publicidade também pode ser encarada como um bem cultural que expressa a cultura da qual faz parte. É na articulação destas duas premissas que reside o interesse primordial e o objeto de estudo da pesquisa: ao considerar o fazer publicitário como representação da sociedade, investigar, a partir da perspectiva do Paradigma das Novas Mobilidades, como o movimento é expresso discursivamente na publicidade das marcas globais. A interpretação do discurso publicitário global teve como objetivo validar a hipótese de que há um consumo de (i)mobilidade sendo feito quando o indivíduo sai em busca de objetos que, a partir de sua disponibilidade (ready-to-handness) e potencial de uso em relação ao ambiente (affordance), suportem sua (i)mobilidade cotidiana com certa estabilidade e menor risco. O locus da investigação é o Brasil e o estudo focou sua análise nos 32 anos relativos ao período de 1982 a 2014. Foram selecionados anúncios de marcas veiculados na revista Veja durante o período de três Copas do Mundo FIFA: de 1982, na Espanha; de 1998, na França; e de 2014, no Brasil, que cobrem o período proposto pela pesquisa.
Resumo:
SOUZA, Anderson A. S. ; SANTANA, André M. ; BRITTO, Ricardo S. ; GONÇALVES, Luiz Marcos G. ; MEDEIROS, Adelardo A. D. Representation of Odometry Errors on Occupancy Grids. In: INTERNATIONAL CONFERENCE ON INFORMATICS IN CONTROL, AUTOMATION AND ROBOTICS, 5., 2008, Funchal, Portugal. Proceedings... Funchal, Portugal: ICINCO, 2008.
Resumo:
The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity
Resumo:
The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity
Resumo:
In this work, we propose methodologies and computer tools to insert robots in cultural environments. The basic idea is to have a robot in a real context (a cultural space) that can represent an user connected to the system through Internet (visitor avatar in the real space) and that the robot also have its representation in a Mixed Reality space (robot avatar in the virtual space). In this way, robot and avatar are not simply real and virtual objects. They play a more important role in the scenery, interfering in the process and taking decisions. In order to have this service running, we developed a module composed by a robot, communication tools and ways to provide integration of these with the virtual environment. As welI we implemented a set of behaviors with the purpose of controlling the robot in the real space. We studied available software and hardware tools for the robotics platform used in the experiments, as welI we developed test routines to determine their potentialities. Finally, we studied the behavior-based control model, we planned and implemented alI the necessary behaviors for the robot integration to the real and virtual cultural spaces. Several experiments were conducted, in order to validate the developed methodologies and tools
Resumo:
The opening of the Brazilian market of electricity and competitiveness between companies in the energy sector make the search for useful information and tools that will assist in decision making activities, increase by the concessionaires. An important source of knowledge for these utilities is the time series of energy demand. The identification of behavior patterns and description of events become important for the planning execution, seeking improvements in service quality and financial benefits. This dissertation presents a methodology based on mining and representation tools of time series, in order to extract knowledge that relate series of electricity demand in various substations connected of a electric utility. The method exploits the relationship of duration, coincidence and partial order of events in multi-dimensionals time series. To represent the knowledge is used the language proposed by Mörchen (2005) called Time Series Knowledge Representation (TSKR). We conducted a case study using time series of energy demand of 8 substations interconnected by a ring system, which feeds the metropolitan area of Goiânia-GO, provided by CELG (Companhia Energética de Goiás), responsible for the service of power distribution in the state of Goiás (Brazil). Using the proposed methodology were extracted three levels of knowledge that describe the behavior of the system studied, representing clearly the system dynamics, becoming a tool to assist planning activities
Resumo:
The mirror has always been related to different symbols, usually connected to self-knowledge and truth. This is due to the fact that this object shows whoever looks oneself in it an image as close to reality as it is possible. On the other hand, the mirror is also associated to mysticism and to the supernatural for it can magically duplicate one who looks into it. This ambiguous characteristic turns the mirror into an element that is fantastic in itself and places it in the central position of our discussion. Therefore, in this study, we analyze the texts In a Glass Darkly, by Agatha Christie, The Oval Portrait, by Edgar Allan Poe, and The Picture of Dorian Gray, by Oscar Wilde, giving special attention to the study of the images and artificial representations of men: the mirror, as an ephemeral representation; and the portrait, as an attempt to eternize an ephemeral image. We also discuss themes such as jealousy, the double, and death in the several forms in which it appears in the texts: suicides, homicides, attempted murders, death in life (mourning, separation, and developmental phases) all of which are, somehow, related to the specular representations. The narrative resource of using a mirror to introduce the supernatural event, along with the theme of death in all the narratives we have studied, and the difficulty to place these texts within the pre-established genres led us to categorize them as being part of a hybrid genre that presents characteristics both of the fantastic and of the detective story which we have named fantastic-detective story
Resumo:
Common understanding about what freedom means has always been more or less related to the power to realize something intended, desired, a capability. Therefore, being free is commonly interpreted under the concept of free-will and the category of possibility to act. Although there are predecessors in History of Philosophy, Schopenhauer refuses the thesis of free will proposing otherwise the denial of willing (to live) as the ultimate possibility for human freedom, if not the only one left. The thesis that would make him famous was deeply misunderstood and so miscarried somewhat due to the way it was many times presented by the means of exotic examples wrapped in a mystical mood besides exaltations to Eastern traditions, which may satisfy anthropological curiosity instead of being capable to satisfy the reader in a philosophical way. It seems to result from Schopenhauer s thought a kind of pessimism against life. Otherwise, typical readings on the Schopenhauerian thesis are found full of inconsistencies once closely regarded, which blame does not belong to the author but to his interpreters. A new reading about the denial of willing as the ultimate possibility for human freedom demands a criticism on the inconsistencies and prejudgments deep grounded. For this, we firstly clarify the ways of understanding the willing nothing , which cannot be reduced to the mere refusal or conformism, being instead positively understood as a special manner of willing: the admission of oneself for the sake of one is. A few more than a century later The world as will and representation came to light, Heidegger proposes in his fundamental ontology that the proper being-free concerns to originary decision by which, in anguish of being suspended in nothingness, Dasein renders itself singular as the being who is in-a-world and to-death, concluding that the ultimate possibility of freedom is being-free-to-death. Developing the hypothesis that freedom, properly understood, concerns to nothingness as to indeterminate possibilities, we seek for a dialogue between Schopenhauer s thought and existential philosophy aiming to reconstitute and overcome Metaphysics tradition turning the question about freedom into a matter of Ontology. From the factual existence perspective, as we must show, every human activity (or inactivity) is ordinarily mediated by representations, in which me and world appear as distinct entities. So, each one among determininate individuals finds itself connected to the things in the world by interest, which proper concept must be sufficiently explored. Starting from this point, we may proceed to detailed analysis of usual representations of freedom aiming their destruction by Ontology and then reaching existential thesis according to Kierkegaard and Heidegger. Turning back to the analysis of Schopenhauer s work, we conclude existential understanding of freedom as will-to-be can also be found in Schopenhauer. In this way, denial of willing means ultimate freedom once the Will turns back to its own essence by suppressing the world as representation, which means the originary absolute indetermination of the extreme possibility to-be
Resumo:
Economic dispatch (ED) problems have recently been solved by artificial neural network approaches. Systems based on artificial neural networks have high computational rates due to the use of a massive number of simple processing elements and the high degree of connectivity between these elements. The ability of neural networks to realize some complex non-linear function makes them attractive for system optimization. All ED models solved by neural approaches described in the literature fail to represent the transmission system. Therefore, such procedures may calculate dispatch policies, which do not take into account important active power constraints. Another drawback pointed out in the literature is that some of the neural approaches fail to converge efficiently toward feasible equilibrium points. A modified Hopfield approach designed to solve ED problems with transmission system representation is presented in this paper. The transmission system is represented through linear load flow equations and constraints on active power flows. The internal parameters of such modified Hopfield networks are computed using the valid-subspace technique. These parameters guarantee the network convergence to feasible equilibrium points, which represent the solution for the ED problem. Simulation results and a sensitivity analysis involving IEEE 14-bus test system are presented to illustrate efficiency of the proposed approach. (C) 2004 Elsevier Ltd. All rights reserved.