Impact of the introduction of machine gaming in Queensland on minor and major bingo

Material for this paper comes from as report commissioned by the Department of Family Services, Aboriginal and Islander Affairs. The report is the result of a multi strategy research project designed to assess the impact of gaming machines on the fundraising capacity of charitable and community organisations in Queensland. The study was conducted during the 1993 calendar year. The first Queensland gaming machine was commissioned on the 11 February, 1992 at 11.30 am in Brisbane at the Kedron Wavell Services Club. Eighteen more clubs followed that week. Six months later there were gaming machines in 335 clubs, and 250 hotels and taverns, representing a state wide total of 7,974 machines in operation. The 10,000 gaming machine was commissioned on the 18 March, 1993 and the 1,000 operational gaming machine site was opened on 18th February, 1994.

Brand loyalty in the Australian wine industry

Consumers are increasingly exposed to a wider range of wine brands as the industry is becoming vastly competitive. Using data from Australian wine consumers, the authors empirically test a model of antecedents of wine brand loyalty. The findings of this study show that wine knowledge and wine experience influence wine brand loyalty indirectly through wine brand trust and wine brand satisfaction. In addition, it is demonstrated that consumer satisfaction with a wine brand is the strongest driver of wine brand loyalty.

Management characteristics and the decision to internationalize : exploration of exporters vs. non-exporters within the Chilean wine industry

The objective of this study was to identify key factors differentiating between exporters and non-exporters in the Chilean wine industry. Based on survey data collected from 61 wineries, the findings show that the main barriers for non-exporters are the lack of financial resources, limited quantities of stock for market expansion, management’s lack of knowledge and experience, and the high cost of travelling and participating in trade shows. The results also show that managers have educational levels and international experience exceeding those of other comparable New World wineries. Finally, in developing their main international markets, Chilean wineries did not target psychically close markets as identified in previous wine industry studies

A simulated annealing algorithm for energy efficient virtual machine placement

Improving energy efficiency has become increasingly important in data centers in recent years to reduce the rapidly growing tremendous amounts of electricity consumption. The power dissipation of the physical servers is the root cause of power usage of other systems, such as cooling systems. Many efforts have been made to make data centers more energy efficient. One of them is to minimize the total power consumption of these servers in a data center through virtual machine consolidation, which is implemented by virtual machine placement. The placement problem is often modeled as a bin packing problem. Due to the NP-hard nature of the problem, heuristic solutions such as First Fit and Best Fit algorithms have been often used and have generally good results. However, their performance leaves room for further improvement. In this paper we propose a Simulated Annealing based algorithm, which aims at further improvement from any feasible placement. This is the first published attempt of using SA to solve the VM placement problem to optimize the power consumption. Experimental results show that this SA algorithm can generate better results, saving up to 25 percentage more energy than First Fit Decreasing in an acceptable time frame.

Energy-efficient virtual machine placement in data centers by genetic algorithm

Server consolidation using virtualization technology has become an important technology to improve the energy efficiency of data centers. Virtual machine placement is the key in the server consolidation. In the past few years, many approaches to the virtual machine placement have been proposed. However, existing virtual machine placement approaches to the virtual machine placement problem consider the energy consumption by physical machines in a data center only, but do not consider the energy consumption in communication network in the data center. However, the energy consumption in the communication network in a data center is not trivial, and therefore should be considered in the virtual machine placement in order to make the data center more energy-efficient. In this paper, we propose a genetic algorithm for a new virtual machine placement problem that considers the energy consumption in both the servers and the communication network in the data center. Experimental results show that the genetic algorithm performs well when tackling test problems of different kinds, and scales up well when the problem size increases.

Probability analysis of machine angle stability with non-gaussian wind power input

The security of power transfer across a given transmission link is typically a steady state assessment. This paper develops tools to assess machine angle stability as affected by a combination of faults and uncertainty of wind power using probability analysis. The paper elaborates on the development of the theoretical assessment tool and demonstrates its efficacy using single machine infinite bus system.

An analysis of construction productivity in Malaysia

The construction industry is an industry of major strategic importance. Its level of productivity has a significant effect on national economic growth. Productivity indicators are examined. The indicators consist of labour productivity, capital productivity, labour competitiveness, capital intensity and added value content of data, which are obtained from the published census/biannual surveys of the construction industry between the years 1999 and 2011 from the Department of Statistics of Malaysia. The results indicated that there is an improvement in the labour productivity, but the value-added content is declining. The civil engineering and special trades subsectors are more productive than the residential and non-residential subsectors in terms of labour productivity because machine-for-labour substitution is a more important process in those subsectors. The capital-intensive characteristics of civil engineering and special trade works enable these subsectors to achieve higher added value per labour cost but not the capital productivity. The added value per labour cost is lower in larger organizations despite higher capital productivity. However, the capital intensity is lower and unit labour cost is higher in the larger organizations.

Acquisition modelling for heavy engineering assets in mining industry

Each year, organizations in Australian mining industry (asset intensive industry) spend substantial amount of capital (A$86 billion in 2009-10) (Statistics, 2011) in acquiring engineering assets. Engineering assets are put to use in operations to generate value. Different functions (departments) of an organization have different expectations and requirements from each of the engineering asset e.g. return on investment, reliability, efficiency, maintainability, low cost of running the asset, low or nil environmental impact and easy of disposal, potential salvage value etc. Assets are acquired from suppliers or built by service providers and or internally. The process of acquiring assets is supported by procurement function. One of the most costly mistakes that organizations can make is acquiring the inappropriate or non-conforming assets that do not fit the purpose. The root cause of acquiring non confirming assets belongs to incorrect acquisition decision and the process of making decisions. It is very important that an asset acquisition decision is based on inputs and multi-criteria of each function within the organization which has direct or indirect impact on the acquisition, utilization, maintenance and disposal of the asset. Literature review shows that currently there is no comprehensive process framework and tool available to evaluate the inclusiveness and breadth of asset acquisition decisions that are taken in the Mining Organizations. This thesis discusses various such criteria and inputs that need to be considered and evaluated from various functions within the organization while making the asset acquisition decision. Criteria from functions such as finance, production, maintenance, logistics, procurement, asset management, environment health and safety, material management, training and development etc. need to be considered to make an effective and coherent asset acquisition decision. The thesis also discusses a tool that is developed to be used in the multi-criteria and cross functional acquisition decision making. The development of multi-criteria and cross functional inputs based decision framework and tool which utilizes that framework to formulate cross functional and integrated asset acquisition decisions are the contribution of this research.

A practical signal processing approach for condition monitoring of low speed machinery using Peak-Hold-Down-Sample algorithm

A simple and effective down-sample algorithm, Peak-Hold-Down-Sample (PHDS) algorithm is developed in this paper to enable a rapid and efficient data transfer in remote condition monitoring applications. The algorithm is particularly useful for high frequency Condition Monitoring (CM) techniques, and for low speed machine applications since the combination of the high sampling frequency and low rotating speed will generally lead to large unwieldy data size. The effectiveness of the algorithm was evaluated and tested on four sets of data in the study. One set of the data was extracted from the condition monitoring signal of a practical industry application. Another set of data was acquired from a low speed machine test rig in the laboratory. The other two sets of data were computer simulated bearing defect signals having either a single or multiple bearing defects. The results disclose that the PHDS algorithm can substantially reduce the size of data while preserving the critical bearing defect information for all the data sets used in this work even when a large down-sample ratio was used (i.e., 500 times down-sampled). In contrast, the down-sample process using existing normal down-sample technique in signal processing eliminates the useful and critical information such as bearing defect frequencies in a signal when the same down-sample ratio was employed. Noise and artificial frequency components were also induced by the normal down-sample technique, thus limits its usefulness for machine condition monitoring applications.

Safety impacts of alcohol and other drugs in construction : development of an industry policy and cultural change management program

There is increasing concern about the impact of employees‟ alcohol and other drug (AOD) consumption on workplace safety and performance, particularly within the construction industry. While most Australian jurisdictions have identified this as a critical safety issue, information is limited regarding the prevalence of AODs in the workplace and there is limited evidential guidance regarding how to effectively and efficiently address such an issue. The current research aims to scientifically evaluate the use of AODs within the Australian construction industry in order to reduce the potential resulting safety and performance impacts and engender a cultural change in the workforce - to render it unacceptable to arrive at a construction workplace with impaired judgement from AODs. The study will adopt qualitative and quantitative methods to firstly evaluate the extent of general AOD use in the industry. Secondly, the development of an appropriate industry policy will adopt a non-punitive and rehabilitative approach developed in consultation with employers and employees across the infrastructure and building sectors, with the aim it be adopted nationally for adoption at the construction workplace. Finally, an industry specific cultural change management program and implementation plan will be developed through a nationally collaborative approach. Final results indicate that a proportion of those sampled in the construction sector may be at risk of hazardous alcohol consumption. A total of 286 respondents (58%) scored above the cut-off cumulative score for risky or hazardous alcohol. Other drug use was also identified as a major issue. Results support the need for evidence-based, preventative educational initiatives that are tailored to the industry. This paper will discuss the final survey and interview results.

Improvising a future in the performing arts : a new strategy to help performance studies students successfully shift between academic culture, professional culture, industry and career?

If there is one thing performance studies graduates should be good at, it is improvising – play and improvisation are central to the contemporary and cultural performance practices we teach and the methods by which we teach them. Objective, offer, acceptance, advancing, reversing, character, status, manipulation, impression management, relationship management – whether we know them from Keith Johnson’s theatre theories or Erving Goffman’s theatre theories, the processes by which we play out a story, scenario or social situation to our own benefit are familiar. We understand that identity, action, interaction and its personal, aesthetic, professional or political outcomes are unpredictable, and that we need to adapt to changeable and uncertain circumstances to achieve our aims. Intriguingly, though, in a Higher Education environment that increasingly emphasises employability, skills in play, improvisation and self-performance are never cited as critical graduate attributes. Is the ability to play, improve and produce spontaneous new self-performances learned in the academy worth articulating into an ability to play, improvise and product spontaneous new self-performances after graduates leave the academy and move into the role of a performing arts professional in industry? A study of the career paths of our performance studies graduates over the past decade suggests that addressing the challenges they face in moving between academic culture, professional culture, industry and career in terms of improvisation and play principles may be very productive. In articles on performing arts careers, graduates are typically advised to find a market for their work, and develop career self-management, management and marketing skills, together with an ability to find, make and maintain relationships and opportunities for themselves. Transitioning to career is cast as a challenging process, requiring these skills, because performing arts careers do not offer the security, status and stability of other careers. Our data confirms this. In our study, though, we found that strategies commonly used to build the resilience, self-reliance and persistence graduates require – talking about portfolio careers, parallel careers, and portable, transferable or translatable skills, for example – can engender panic as easily as they engender confidence. In this paper, I consider what happens when we re-articulate some of the skills scholars and industry stakeholders argue are critical in allowing graduates to shift successfully from academy to industry in terms of skills like improvisation, play and self-performance that are already familiar, meaningful and much-practiced amongst performance studies graduates.

Media education, collaboration and industry : a case study of what a group of year 10 and 11 students value in a community of practice

This case study incorporated an analysis of a group of young people as media producers and placed young people’s perspectives of their media education learning at the core of the analysis. Communities of practice social learning theory provided an effective conceptual framework for investigating the nature of the participants’ involvement in a secondary school and creative industry partnership. The analysis of the data in this study indicated that the participants valued their learning by imagining, actively participating and belonging to a media education community of practice. By enabling young people to work directly with creative industries this school and industry partnership provided students with what they saw as valuable first-hand experience of professional expertise, that contributed to students’ understanding of their own and others’ identities.

Complicated working time arrangements : construction industry case study

This paper extends the understanding of working-time changes and work-life balance (WLB) through analyzing a case study where a reduction in working hours designed to assist the workforce in balancing work and nonwork life was implemented. An alliance project in the Australian construction industry was established initially with a 5-day working week, a departure from the industry-standard 6-day week. However, a range of factors complicated the success of this initiative, and the industry-standard 6-day working week was reinstated for the project. The authors argue that this case is valuable in determining the complex mix of influences that work against a wholesale or straightforward adoption of working-time adjustments and work-life balance practices. It is concluded that although the prevailing workplace culture is considered an important factor in the determination of working time, structural and workplace principles and practices may also be critical in working to secure the successful introduction of working-time reduction and work-life balance initiatives in the construction industry in the future.

Confronting the shortage of skilled and professional workers : A large scale industry-school partnership initiative

In most of the advanced economies, students are losing interest in careers especially in engineering and related industries. Hence, western economies are confronting a critical skilled labour shortage in areas of technology, science and engineering. The aim of this paper is to document how the organisational and institutional elements of one industry-school partnerships initiative – The Gateway Schools Program - contribute to productive knowledge sharing and networking. In particular this paper focuses on an initiative of an Australian State government in response to a perceived crisis around the skills shortage in an economy transitioning from a localised to a global knowledge production economy. The Gateway Schools initiative signals the first sustained attempt in Australia to incorporate schools into production networks through strategic partnerships linking them to partner organisations at the industry level. We provide case examples of how four schools operationalise the partnerships with the mining and energy industries and how these partnerships as knowledge assets impact the delivery of curriculum and capacity building among teachers. A program theory approach to analysis, informed by theoretical perspectives of Bailey (1994), Bagnall (2007) and Walsh (2004) was adopted. Each of these theorists provides a related but different perspective on the establishment, purpose, and effectiveness respectively of partnerships. Our ultimate goal is to define those characteristics of successful partnerships that do contribute to enhanced interest and engagement by students in those careers that are currently experiencing critical shortages.

Between formal and informal : the shakeout in China’s online video industry

While a rich body of literature in television and film studies and media policy studies has tended to focus on the media activities in the formal sector, we know much less about informal media activities, its influence on state policies, as well as the dynamics between the formal and the informal sectors. This article examines these issues with reference to a particularly revealing period following a large-scale government crackdown on peer-to-peer video sharing sites in China in 2008. By analyzing the aim and consequences of the state action, I point to the counter-productive effect in terms of cultural loss and the resurgence of offline piracy; and show the positive impact on forcing the informal into the formal sector, and pressuring the formal to innovate. Meanwhile, an increasing rapprochement between professional and user-created content leads to a new relationship between formal and informal sectors. This case demonstrates the importance of considering the dynamics between the two sectors. It also offers compelling evidence of the role of the informal sector in engendering state action, which in turn impacted on the co-evolution of the formal and the informal sectors.