Análise paramétrica e optimização estrutural utilizando o software comercial ANSYS

Dissertação para obtenção do Grau de Mestre em Engenharia Civil

Interfaces Cérebro-Computador Utilização do Emotiv EPOC para controlar software lúdico

Uma interface cérebro-computador (BCI) não é mais do que um dispositivo que lê e analisa ondas cerebrais e as converte em ações sobre um computador. Com a evolução das BCI e a possibilidade de acesso às mesmas por parte do público começou a ser possível o uso de BCIs para fins lúdicos. Nesse sentido nesta tese foi feito um estudo sobre interfaces cérebro-computador, o que são, que tipos de BCI existem, o seu uso para entretenimento, as suas limitações e o futuro deste tipo de interfaces. Foi ainda criado um software lúdico controlado por BCI (Emotiv EPOC) que é composto por um jogo tipo Pong e um reprodutor de música. O reprodutor de música através de BCI classifica e recomenda músicas ao utilizador. Com esta tese foi possível chegar à conclusão que é possível utilizar BCI para entretenimento (jogos e recomendação de conteúdos) apesar de se ter verificado que para jogos os dispositivos tradicionais de controlo (rato e teclado) ainda têm uma precisão muito superior.

O uso do software winplot na aprendizagem matemática em sala de aula: uma inovação pedagógica?

Esse trabalho tem como objetivo de pesquisar o uso do software Winplot nas aulas de matemática como instrumento auxiliar e fator de ruptura das práticas pedagógicas fundamentadas no paradigma fabril, criando ambientes favoráveis ao ensino e aprendizagem, dando maior ênfase a aprendizagem, proporcionando aos educandos serem construtores dos seus próprios conhecimentos, valorizando os seus significados, propiciando a formação de cidadãos críticos e autônomos e educadores como mediadores nesse processo. Para a realização desse trabalho de pesquisa foi adotada a metodologia qualitativa com fundamentos etnográficos, a observação participante e a utilização do diário de bordo eletrônico etnográfico que nos garantiu agilidade nos registros de campo, propiciando a descrição das ações reais de educador e educandos em função do uso desse software que assegurou o desejo dos educandos, educador e pesquisador nas mudanças das praxes pedagógicas que valorizam o educando como centro no processo de ensino e aprendizagem contribuindo para que a escola seja estimulada a adotar um currículo flexível propiciando uma educação contextualizada.

Software de gestão de manutenção como ferramenta de apoio à melhoria da eficiência da gestão de infraestruturas

Este trabalho académico surge no âmbito da realização da dissertação do Mestrado em Engenharia e Gestão Industrial. Tem como objetivo a melhoria da gestão do Departamento de Infraestruturas, numa empresa de produção de motores elétricos para a indústria automóvel, através da análise, implementação e melhoria de um software de gestão de manutenção, de forma a aumentar a eficiência do Departamento. Este estudo foi desenvolvido durante um estágio curricular na empresa Globe Motors Portugal Lda, localizada em Vila do Conde. Para sua sustentação, foi efetuada uma análise funcional, suportada por um Software de gestão de manutenção, de forma a perceber qual a importância que o mesmo tem no funcionamento do Departamento de Infraestruturas. Pretendeu-se compreender quais as vantagens e desvantagens da sua utilização. Posteriormente, implementou-se uma nova versão deste software, analisando-se os pontos fortes e as oportunidades de melhoria, de forma a tornar o Departamento de infraestruturas mais eficiente, através da utilização desta renovada ferramenta de trabalho. Como objetivo último, pretendeu-se à melhoria da organização e gestão do Departamento de infraestruturas, contribuindo para um desenvolvimento de toda a empresa, uma vez que comungamos a ideia de que só é possível ser competitivo, num mercado altamente exigente, através de processos eficientes, possibilitando a redução de custos a todos os níveis.

A Visual Programming Framework for Wireless Sensor Networks in Smart Home Applications

International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2015). 7 to 9, Apr, 2015. Singapure, Singapore.

Allocation of Parallel Real-Time Tasks in Distributed Multi-core Architectures supported by an FTT-SE Network

Distributed real-time systems such as automotive applications are becoming larger and more complex, thus, requiring the use of more powerful hardware and software architectures. Furthermore, those distributed applications commonly have stringent real-time constraints. This implies that such applications would gain in flexibility if they were parallelized and distributed over the system. In this paper, we consider the problem of allocating fixed-priority fork-join Parallel/Distributed real-time tasks onto distributed multi-core nodes connected through a Flexible Time Triggered Switched Ethernet network. We analyze the system requirements and present a set of formulations based on a constraint programming approach. Constraint programming allows us to express the relations between variables in the form of constraints. Our approach is guaranteed to find a feasible solution, if one exists, in contrast to other approaches based on heuristics. Furthermore, approaches based on constraint programming have shown to obtain solutions for these type of formulations in reasonable time.

A system model and stack for the parallelization of time-critical applications on many-core architectures

3rd Workshop on High-performance and Real-time Embedded Systems (HIRES 2015). 21, Jan, 2015. Amsterdam, Netherlands.

A framework for using real data with distributed low cost sensors

Currently, due to the widespread use of computers and the internet, students are trading libraries for the World Wide Web and laboratories with simulation programs. In most courses, simulators are made available to students and can be used to proof theoretical results or to test a developing hardware/product. Although this is an interesting solution: low cost, easy and fast way to perform some courses work, it has indeed major disadvantages. As everything is currently being done with/in a computer, the students are loosing the “feel” of the real values of the magnitudes. For instance in engineering studies, and mainly in the first years, students need to learn electronics, algorithmic, mathematics and physics. All of these areas can use numerical analysis software, simulation software or spreadsheets and in the majority of the cases data used is either simulated or random numbers, but real data could be used instead. For example, if a course uses numerical analysis software and needs a dataset, the students can learn to manipulate arrays. Also, when using the spreadsheets to build graphics, instead of using a random table, students could use a real dataset based, for instance, in the room temperature and its variation across the day. In this work we present a framework which uses a simple interface allowing it to be used by different courses where the computers are the teaching/learning process in order to give a more realistic feeling to students by using real data. A framework is proposed based on a set of low cost sensors for different physical magnitudes, e.g. temperature, light, wind speed, which are connected to a central server, that the students have access with an Ethernet protocol or are connected directly to the student computer/laptop. These sensors use the communication ports available such as: serial ports, parallel ports, Ethernet or Universal Serial Bus (USB). Since a central server is used, the students are encouraged to use sensor values results in their different courses and consequently in different types of software such as: numerical analysis tools, spreadsheets or simply inside any programming language when a dataset is needed. In order to do this, small pieces of hardware were developed containing at least one sensor using different types of computer communication. As long as the sensors are attached in a server connected to the internet, these tools can also be shared between different schools. This allows sensors that aren't available in a determined school to be used by getting the values from other places that are sharing them. Another remark is that students in the more advanced years and (theoretically) more know how, can use the courses that have some affinities with electronic development to build new sensor pieces and expand the framework further. The final solution provided is very interesting, low cost, simple to develop, allowing flexibility of resources by using the same materials in several courses bringing real world data into the students computer works.

Formal Contracts for Runtime Verification Support in the Ada Programming Language

Poster presented in The 28th GI/ITG International Conference on Architecture of Computing Systems (ARCS 2015). 24 to 26, Mar, 2015. Porto, Portugal.

A Modular Programming Approach for IoTBased Wireless Sensor Networks

Poster presented in 12th European Conference on Wireless Sensor Network (EWSN 2015). 9 to 11, Feb, 2015. Porto, Portugal.

A learning environment for robotic production line simulation

This paper presents a framework for a robotic production line simulation learning environment using Autonomous Ground Vehicles (AGV). An eLearning platform is used as interface with the simulator. The objective is to introduce students to the production robotics area using a familiar tool, an eLearning platform, and a framework that simulates a production line using AGVs. This framework allows students to learn about robotics but also about several areas of industrial management engineering without requiring an extensive prior knowledge on the robotics area. The robotic production line simulation learning environment simulates a production environment using AGVs to transport materials to and from the production line. The simulator allows students to validate the AGV dynamics and provides information about the whole materials supplying system which includes: supply times, route optimization and inventory management. The students are required to address several topics such as: sensors, actuators, controllers and an high level management and optimization software. This simulator was developed with a known open source tool from robotics community: Player/Stage. This tool was extended with several add-ons so that students can be able to interact with a complex simulation environment. These add-ons include an abstraction communication layer that performs events provided by the database server which is programmed by the students. An eLearning platform is used as interface between the students and the simulator. The students can visualize the effects of their instructions/programming in the simulator that they can access via the eLearning platform. The proposed framework aims to allow students from different backgrounds to fully experience robotics in practice by suppressing the huge gap between theory and practice that exists in robotics. Using an eLearning platform eliminates installation problems that can occur from different computers software distribution and makes the simulator accessible by all students at school and at home.

Scalable and Efficient Configuration of TimeDivision Multiplexed Resources

Consumer-electronics systems are becoming increasingly complex as the number of integrated applications is growing. Some of these applications have real-time requirements, while other non-real-time applications only require good average performance. For cost-efficient design, contemporary platforms feature an increasing number of cores that share resources, such as memories and interconnects. However, resource sharing causes contention that must be resolved by a resource arbiter, such as Time-Division Multiplexing. A key challenge is to configure this arbiter to satisfy the bandwidth and latency requirements of the real-time applications, while maximizing the slack capacity to improve performance of their non-real-time counterparts. As this configuration problem is NP-hard, a sophisticated automated configuration method is required to avoid negatively impacting design time. The main contributions of this article are: 1) An optimal approach that takes an existing integer linear programming (ILP) model addressing the problem and wraps it in a branch-and-price framework to improve scalability. 2) A faster heuristic algorithm that typically provides near-optimal solutions. 3) An experimental evaluation that quantitatively compares the branch-and-price approach to the previously formulated ILP model and the proposed heuristic. 4) A case study of an HD video and graphics processing system that demonstrates the practical applicability of the approach.

Ensemble: an innovative approach to practice computer programming

Currently, the teaching-learning process in domains, such as computer programming, is characterized by an extensive curricula and a high enrolment of students. This poses a great workload for faculty and teaching assistants responsible for the creation, delivery, and assessment of student exercises. The main goal of this chapter is to foster practice-based learning in complex domains. This objective is attained with an e-learning framework—called Ensemble—as a conceptual tool to organize and facilitate technical interoperability among services. The Ensemble framework is used on a specific domain: computer programming. Content issues are tacked with a standard format to describe programming exercises as learning objects. Communication is achieved with the extension of existing specifications for the interoperation with several systems typically found in an e-learning environment. In order to evaluate the acceptability of the proposed solution, an Ensemble instance was validated on a classroom experiment with encouraging results.