973 resultados para Si microstrip and pad detectors
Resumo:
The electrical and electroluminescence (EL) properties at room and high temperatures of oxide/ nitride/oxide (ONO)-based light emitting capacitors are studied. The ONO multidielectric layer is enriched with silicon by means of ion implantation. The exceeding silicon distribution follows a Gaussian profile with a maximum of 19%, centered close to the lower oxide/nitride interface. The electrical measurements performed at room and high temperatures allowed to unambiguously identify variable range hopping (VRH) as the dominant electrical conduction mechanism at low voltages, whereas at moderate and high voltages, a hybrid conduction formed by means of variable range hopping and space charge-limited current enhanced by Poole-Frenkel effect predominates. The EL spectra at different temperatures are also recorded, and the correlation between charge transport mechanisms and EL properties is discussed.
Resumo:
Postprint (published version)
Resumo:
A mathematical model of the voltage drop which arises in on-chip power distribution networks is used to compare the maximum voltage drop in the case of different geometric arrangements of the pads supplying power to the chip. These include the square or Manhattan power pad arrangement, which currently predominates, as well as equilateral triangular and hexagonal arrangements. In agreement with the findings in the literature and with physical and SPICE models, the equilateral triangular power pad arrangement is found to minimize the maximum voltage drop. This headline finding is a consequence of relatively simple formulas for the voltage drop, with explicit error bounds, which are established using complex analysis techniques, and elliptic functions in particular.
Resumo:
ABSTRACT 'The Duologue of King/Governor Pāyāsi' ("Long Discourses") has long been recognised as a source for the proto-materialism current at the time of the Buddha. What needs to be stressed is the significance of the text as a pointer to the development of Logic in India. Perception (observation and experiment employing the joint method of agreement and difference), which is an accepted method of experimental enquiry, and reasoning from analogy, which can lead at best to a probable conclusion - these two are the only means employed to settle the dispute concerning the existence of the other-world. The Jain version of the same duologue-cum-parable, though varying in minor details regarding the name and identity of the monk refuting the king/governor, contains the same contrast, namely, perception versus analogical reasoning. There can be little doubt that the original parable was conceived with a view to asserting the existence of the other-world. In the Kaṭha Upaniṣad (sixth century BCE), an earlier Brahmanical text, however, instead of argument by analogy, verbal testimony (śabda) was invoked to settle the same point. Naciketas is assailed by doubt about the existence of a person after his or her death. The authority of Yama, the Pluto of Indian mythology, is invoked to convince him that the other-world does exist. Thus, the three parables taken together exhibit three means of knowledge in operation: verbal testimony and argument by analogy pitted against perception.
Resumo:
Local features are used in many computer vision tasks including visual object categorization, content-based image retrieval and object recognition to mention a few. Local features are points, blobs or regions in images that are extracted using a local feature detector. To make use of extracted local features the localized interest points are described using a local feature descriptor. A descriptor histogram vector is a compact representation of an image and can be used for searching and matching images in databases. In this thesis the performance of local feature detectors and descriptors is evaluated for object class detection task. Features are extracted from image samples belonging to several object classes. Matching features are then searched using random image pairs of a same class. The goal of this thesis is to find out what are the best detector and descriptor methods for such task in terms of detector repeatability and descriptor matching rate.
Resumo:
Planar, large area, position sensitive silicon detectors are widely utilized in high energy physics research and in medical, computed tomography (CT). This thesis describes author's research work relating to development of such detector components. The key motivation and objective for the research work has been the development of novel, position sensitive detectors improving the performance of the instruments they are intended for. Silicon strip detectors are the key components of barrel-shaped tracking instruments which are typically the innermost structures of high energy physics experimental stations. Particle colliders such as the former LEP collider or present LHC produce particle collisions and the silicon strip detector based trackers locate the trajectories of particles emanating from such collisions. Medical CT has become a regular part of everyday medical care in all developed countries. CT scanning enables x-ray imaging of all parts of the human body with an outstanding structural resolution and contrast. Brain, chest and abdomen slice images with a resolution of 0.5 mm are possible and latest CT machines are able to image whole human heart between heart beats. The two application areas are presented shortly and the radiation detection properties of planar silicon detectors are discussed. Fabrication methods and preamplifier electronics of the planar detectors are presented. Designs of the developed, large area silicon detectors are presented and measurement results of the key operating parameters are discussed. Static and dynamic performance of the developed silicon strip detectors are shown to be very satisfactory for experimental physics applications. Results relating to the developed, novel CT detector chips are found to be very promising for further development and all key performance goals are met.
Resumo:
Les facteurs de risque des maladies cardiovasculaires, telle, que la détérioration du profil lipidique, deviennent plus prononcés après la ménopause, ce qui fait de la maladie coronarienne, l’une des principales causes de décès chez les femmes ménopausées. Une proportion importante de femmes prennent du poids après la ménopause en particulier dans la région abdominale entraînant par conséquent des perturbations métaboliques. Des données récentes suggèrent également que l’absence des œstrogènes observée à la ménopause favorise le développement de la stéatose hépatique. Cette dernière a été incriminée pour incriminée dans le développement de la résistance à l'insuline, et est de ce fait considérée comme une composante hépatique du syndrome métabolique. Il est impératif d'établir des stratégies visant à contrecarrer l'accumulation de graisse dans le foie et l’accroissement du tissu adipeux chez les femmes ménopausées, en tenant compte que l'utilisation de l'hormonothérapie substitutive est de nos jours moins soutenue. Les quatre études de la présente thèse ont été conduites pour tenter de fournir des informations sur le traitement et la prévention de l’augmentation de la masse graisseuse et de la stéatose hépatique qu’entraîne la suppression des œstrogènes, à travers les modifications du mode de vie (diète et exercice physique) chez la rate ovariectomizée (Ovx); un modèle animal de la ménopause. Dans les deux premières études nous nous sommes concentrés sur l’augmentation de la masse graisseuse et sa reprise suite à une perte de poids. Dans la première étude, nous avons montré que les rates Ovx qui ont suivi un programme de restriction alimentaire (FR) ont diminué significativement (P < 0.01) leur poids corporel, leur contenu en graisses intra-abdominales ainsi que leurs triacylglycérols (TAG) hépatiques, comparativement aux rates Ovx nourries à la diète normale. De plus, l’entraînement en résistance (RT) a prévenu la reprise de poids corporel ainsi que l’accroissement du tissu adipeux et l’accumulation de lipides dans le foie des rates Ovx, après l’arrêt du régime amaigrissant. Les résultats de la deuxième étude ont confirmé l'efficacité de la restriction alimentaire associée à l’entraînement en résistance (FR + RT) dans la réduction du poids corporel, des lipides dans le foie et le tissu adipeux chez les rates Ovx. Tenant compte des résultats de notre première étude, l’entraînement en résistance seulement a constitué un atout pour atténuer le poids corporel et la masse grasse reprise par les rates Ovx suite à un programme de perte de poids (FR + RT); bien que l'impact ait été moindre comparé au maintien seul de la restriction alimentaire. De la même manière que la supplémentation en œstrogènes, les résultats de la troisième étude indiquent que l'entraînement en endurance mené concurremment avec l’ovariectomie a significativement atténué l'accumulation de lipides dans le foie ainsi que dans le tissu adipeux. Toutefois, l’entraînement en endurance effectué avant l'ovariectomie n'a pas protégé contre l'accumulation des graisses qu’entraîne l'ovariectomie, si celui-ci est interrompu après l'ovariectomie. Enfin, pour compléter les résultats antérieurs, nous avons montré dans la quatrième étude que l’expression des gènes impliqués dans la synthèse de lipide; SREBP-1c, SCD-1, ChREBP, et ACC dans le foie a augmenté après le retrait des œstrogènes, tandis qu’une diminution (P < 0.01) des niveaux d'ARNm de PPAR-α a été observée. De plus, l'expression hépatique des gènes des cytokines pro-inflammatoires incluant IKKβ, IL-6 ainsi que le contenu protéinique de NF-кB étaient augmentés (P < 0.01) chez les rates Ovx par rapport aux rates ayant subi une Ovx simulée (Sham). Toutes ces perturbations ont été améliorées avec la supplémentation en œstrogènes seulement, ainsi qu'avec l'entraînement en endurance seulement. Dans l'ensemble, nos résultats indiquent que l'exercice physique (en résistance ou en endurance) a un impact significatif sur la réduction de l'accumulation des lipides dans le foie et dans le tissu adipeux des rates Ovx. De plus, chez les rates Ovx, l’entraînement en endurance mimerait les effets des œstrogènes sur l'expression des gènes impliqués dans l'accumulation de lipides et l’inflammation préclinique dans le foie.
Resumo:
Chemical bath deposition (CBD)is one of the simplest, very convient and probably the cheapest method for thin film preparation. Photovoltaic is the cleanest and the most efficient mode of conversion of energy to electrical power. Silicon is the most popular material in this field. The present study on chemical bath deposited semiconducting copper selenide and iron sulfide thin films useful for photovoltaic applications. Semiconducting thin films prepared by chemical deposition find applications as photo detectors, solar control coatings and solar cells. Copper selenide is a p-type semiconductor that finds application in photovolitics. Several heterojunction systems such as Cu2-xSe/ZnSe (for injection electro luminescence), Cu2Se/AgInSe2 and Cu2Se/Si (for photodiodes), Cu2-xSe/CdS, Cu2-xSe/CdSe, CuxSe/InP and Cu2-xSe/Si for solar cells are reported. A maximum efficiency of 8.3% was achieved for the Cu2-xSe/Si cell, various preparation techniques are used for copper selenide like vacuum evaporation, direct reaction, electrodeposition and CBD. Instability of the as-prepared films was investigation and is accounted as mainly due to deviation from stoichiometry and the formation of iron oxide impurity. A sulphur annealing chamber was designed and fabricated for this work. These samples wee also analysed using optical absorption technique, XPS (X-ray Photoelectron Spectroscopy) and XRD.(X-Ray Diffraction).The pyrite films obtained by CBD technique showed amorphous nature and the electrical studies carried out showed the films to be of high resistive nature. Future work possible in the material of iron pyrite includes sulphur annealing of the non-stochiometric iron pyrite CBD thin films in the absence of atmospheric oxygen
Resumo:
A new method for enhancing the 2.1 VSWR impedance bandwidth of microstrip antennas is presented. Bandwidth enhancement is achieved by loading the microstrip antenna by a ceramic microwave dielectric resonator (DR). The validity of this technique has been established using rectangular and circular radiating geometries. This method improves the bandwidth of a rectangular microstrip antenna to more than 10% (= 5 times that of a conventional rectangular microstrip antenna) with an enhanced gain of I dB
Resumo:
compact multihand planar octagonal-shaped microstrip antenna simultaneously suitable for mobile communication and blue tooth application is presented. The antenna provides sufficient isolation benveen the two operating bands and an area reduction of -29 % with respect to a circular patch operating in the same band
Resumo:
A dual-port dual-polarized compact microstrip antenna for avoiding cross coupling between the two frequency bands is proposed and analyzed. This antenna offers channel isolation better than 25 dB, and is more compact compared to a conventional rectangular patch. Analytical equations for calculating the resonant frequencies at both ports are also presented. The theoretical calculations are verified using experimental results
Resumo:
In this paper, microstrip lines magnetically coupled to splitring resonators (SRRs) are conquved to electromagnetic bundgup (EBG) nr,rrostrip lines in terns q/ their stop-heard penjbrnmrnce and dimensions. In bath types o/ trunsmis•siou lines, signal propagation is inhibited in it certain jequency bwuL For EBG microstrip lines, the central frequency of such a forbidden band is determined by the period of the structure, whereas in SRR-hased microstrip lines the position of the frequency gap depends on the quasi-static resonant frequency of the rings. The main relevant conrributiun of this paper is to provide a tuning procedure to control the gap width in SRR microstrip lines, and to show that by using SRRs, device dimensions ale much smaller than those required by EBGs in order to obtain similar stop-banal performance. This has been demonstrated by fill-wave electromagnetic simulations and experimentally verified from the characterization ql two fabricated microstrip lines: one with rectangular SRRs etched on the upper substrate side, and the other with a periodic perturbation cf'strip width. For similar rejection and 1-(;H,. gap width centered at 4.5 Gllz, it has been found that the SRR microstrip line is•,fve times shorter. In addition, no ripple is appreciable in the allowed band for the .SRR-hared structure, whereas due to dispersion, certain mismatch is expected in the EBG prototype. Due to the high-frequency selectivity, controllable gap width, and small dimensions, it is believed that SRR coupled to planar transmission lines can have an actual impact on the design of stop-band filters compatible with planar technology, and can be an alternative to present solutions based on distributed approaches or EBG
Resumo:
Propagation of electromagnetic waves through a microstrip line with 2D electromagnetic baud gap (EBG) structures of different geometrical shapes in the ground plane is investigated in this paper. Using transmission-line theory, the design equations for EBG structures are calculated. The measured, numerical. and simulated results are in gone) agreement
Resumo:
The thesis is the outcome of the experimental and theoretical Investigations on novel feeding techniques for bandwidth enhancement of microstrip patches. The new feeding techniques provide bandwidth enhancement without deteriorating the radiation characteristics of the antenna. The antenna is analysed using finite Difference Time Domain (FDTD) method. The predicated results are compared with the experimental results and excellent agreement is observed. The results are also verified using IE3D simulation software. The antenna is suitable for personal and broadband communications.