Certificação ISO 9001 e Gestão de Recursos Humanos: precedentes e consequentes: estudo de caso das Unidades de Serviços Certificadas da Universidade do Minho

Dissertação de mestrado em Gestão de Recursos Humanos

Establishing the prevalence of hypertension. Influence of sampling criteria

OBJECTIVE: To compare the prevalence of systemic hypertension in two different populations: a representative sample of the adult urban population of Porto Alegre, and individuals who sought blood pressure measurement in a hypertension prevention and control campaign. METHODS: A cross-sectional study was carried out involving a representative sample of the adult urban population of Porto Alegre and a population sample obtained from a hypertension prevention and control campaign, which included all the individuals who sought the blood pressure assessment unit at the Hospital das Clínicas in Porto Alegre. The following parameters were investigated: history of hypertension, use of antihypertensive drugs, age, and sex. Adjustments for age and sex in the prevalence rates were performed to make them comparable. RESULTS: Hypertension prevalence, defined as values > or = 160/95mmHg or treatment with antihypertensive drugs, was higher in the campaign sample (42%) as compared with the population sample (24%). Among those who were aware of their hypertensive condition and were under medication, 54% of the campaign sample and 62% of the representative population sample maintained their pressure levels <160/90mmHg. CONCLUSION: Prevalence rates of hypertension differed a lot in the campaign sample and in the representative population sample, showing that the sampling criterion may influence assessment of risk factors and bias the association between risk factors and health aggravations.

Fontan Operation and the Cavopulmonary Technique: Immediate and Late Results According to the Presence of Atrial Fenestration

OBJECTIVE: To compare immediate and late results in patients with or without fenestration who underwent cavopulmonary anastomosis so that we could assess the efficiency of the technique. METHODS: Sixty-two patients underwent surgery between 1988 and 1999, 41 with fenestration (group I -G I) and 21 without fenestration (group II -G II). Tricuspid atresia was prevalent in group I (23-56%) and single ventricle was prevalent in group II (14-66%). Mean ages at the time of operation were 7.3 years in group I and 7.6 in group II. At late follow-up, mean ages were 10.6 years in group I and 12.8 years in group II. RESULTS: Immediate and late mortality were 7.3% in G-I and 4.7% in G-II. Significant pleural effusion occurred in 41.4% of G-I patients and in 23.8% of G-II patients. Significant pericardial effusion occurred in 29.2% and 14.2%, respectively, in groups I and II. Central venous pressure was greater in G-II, 17.7 cm in H2O, as opposed to 15 cm in G-I. Hospital stay was similar between the groups, 26.3 and 21.8 days, respectively. Cyanosis and arterial insaturation occurred in 5 patients, and 4 patients were in functional class II, all from G-I. At late follow-up, 58 (93.5%) were in functional class I. Sinus rhythm was present in 94%, and pulmonary perfusion was similar in both groups. Eleven patients who underwent spirometry had good tolerance to physical effort. CONCLUSION: Atrial fenestration did not improve the immediate or late follow-up of patients who underwent cavopulmonary anastomosis, and is, therefore, dispensable.

Using one-year claim development to chose a large claim reserving technique

Mestrado em Ciências Actuariais

Los objetos técnicos y los organismos tecnificados. Reflexiones filosóficas, estéticas y políticas sobre la técnica. Technical objects and technified organisms. Philosophical, aesthetical and political approaches on technique

El presente proyecto se propone como parte inicial de una investigación sobre la relación entre naturaleza/cultura/técnica. Tradicionalmente la naturaleza y la cultura se han considerado como ámbitos diferenciados y opuestos. Y es en esta distinción donde la técnica adquiere un lugar central. El pensamiento occidental sobre la técnica ha recibido diversas interpretaciones: desde una subordinación con respecto al conocimiento verdadero (episteme) en la filosofía clásica, un optimismo sobre la técnica como posibilidad de dominación de la naturaleza en el Renacimiento y la Ilustración, y la ambigüedad y desasosiego romántico (Mitcham, 1979). Durante el siglo XX se distinguen dos posiciones antagónicas sobre la técnica. Por un lado, una actitud “crítica” donde pueden identificarse los trabajos de filósofs de diferentes tradiciones como Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) y la Escuela de Frankfurt. Por otro lado, una filosofía de la técnica “ingenieril” que consiste en el análisis de la tecnología como un paradigma de pensamiento y acción humana. Esta dicotomía ha sido interpretada por Eco como “apocalípticos e integrados”. Más allá de las mencionadas diferencias, lo que tienen en común ambas posiciones es que parten de una dicotomía entre cultura y naturaleza. Nuestra perspectiva rechaza esta dicotomía, por el contrario, evidenciamos una creciente imbricación entre ambas donde las fronteras entre una y otra se hacen difusas. La noción de “objeto técnico” propuesta por Simondon (2007) hace referencia a la inserción del objeto técnico en la cultura, donde debe reconocerse la “realidad humana” presente en el mismo. Ahora bien, esto no significa “humanizar el objeto técnico”, sino más bien indagar sobre el lugar que este ocupa en la cultura como también establecer su relación con la naturaleza. En el siglo XVII el hombre mismo es reinterpretado como máquina (La Mettrie, 2000). En la actualidad pueden identificarse dos tendencias en la concepción de la técnica: los «humanos-máquinas» y las «máquinas-humanas», en otras palabras, la disposición del humano hacia la máquina y la tendencia de la máquina hacia lo humano. No obstante, ambas posiciones siguen manteniendo una distinción taxonómica entre el cuerpo –o lo orgánico- y lo maquínico, lo que implica una consideración de esta relación de manera extrínseca. Frente a esta tensión Haraway propone el concepto de cyborg: «un organismo cibernético» (1995). Los desarrollos tecnológicos han producido una modificación tal en la vida de los seres orgánicos en los cuales ya no puede concebirse su cuerpo independientemente de la tecnología. Esto conduce a replantear la distinción entre “animales/hombres/máquinas”, entendiendo a los mismos como expresiones de naturaleza, cultura y tecnología respectivamente. Nuestra investigación parte de la hipótesis que la técnica diluye diferencias de orden natural y cultural a través de los objetos técnicos que son productos culturales. La estética se ocupa de la percepción sensible del mundo no puede eludir su dimensión técnica. Al margen de la crítica a la “Industria cultural” consideramos relevante la aproximación de Benjamin al problema de la técnica porque aborda la imbricación antes mencionada en el campo de la percepción. Según Benjamin la irrupción de la técnica al mismo tiempo que posibilita una estetización de la política que confluye en el fascismo como punto extremo también abre la posibilidad de desmontar la ideología del progreso infinito (1967). Una integración entre aproximaciones estéticas y políticas a la técnica Flusser (1983) propone la “caja negra” como metáfora de la técnica contemporánea. Su propuesta es la “apertura de la caja negra” que consiste en tomar conocimiento del funcionamiento del dispositivo. Nuestra propuesta de investigación aborda la técnica desde una consideración filosófica/estética/política, donde redefiniremos la técnica partiendo de la imbricación entre cultura y naturaleza. This project will set the basis for a sustained research on the relation nature/culture/technique. They have been traditionally considered as separate and even opposite fields. And it is on the brink of this distinction where technique plays a central role. In Western thought technique has received many interpretations since the beginnings of philosophy: from a subordination to true knowledge (episteme) in classic philosophy, or the optimism which sees in technique the possibility of dominating nature in the Renaissance and in the Enlightenment, to the Romantic ambiguity and uneasiness towards technological change (Mitcham, 1979). During the twentieth century two opposed approach on technique prevail. On one hand, a “critical” attitude such defines the work of philosophers of different traditions such as Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) and the Frankfurt School. On the other hand there is an “engineering” philosophy of technique that consists in the analisis of technology as a paradigm to understand human action and thought. Besides their differences, both positions have in common a dichotomy between nature and culture. We reject such dichotomy. On the contrary we consider there is a growing intertwinement between both which blurs the borders of the concepts. Simondon’s notion of “technical object” refers to the insertion of the technique in culture where the “human reality” in it must be recognised. This does not imply “humanising the technical object”, but investigate on the role it plays on culture and establishing its relation to nature. To articulate this relation we will work with unorthodox approaches on technique such as Benjamin (1967), Flusser (1983) and others. The hypothesis of our project is that the traditional distinction of “animal/man/machine” must be re-thought, therefore raising the question on the blurring line between nature, culture and technique and its effects in philosophy, politics and aesthetics.

Statistical analysis in multivariate sampling

Magdeburg, Univ., Fak. für Mathematik, Diss., 2011

Technique and clinical applications of double balloon enteroscopy for the evaluation of small bowel diseases

Magdeburg, Univ., Med. Fak., Diss., 2012

Identification technique of mechanism-based constitutive model for cast iron under thermo-mechanical loads

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015

Influence of seasons and sampling strategy on assessment of bioaerosols in sewage treatment plants in Switzerland

An assessment of sewage workers' exposure to airborne cultivable bacteria, fungi and inhaled endotoxins was performed at 11 sewage treatment plants. We sampled the enclosed and unenclosed treatment areas in each plant and evaluated the influence of seasons (summer and winter) on bioaerosol levels. We also measured personal exposure to endotoxins of workers during special operation where a higher risk of bioaerosol inhalation was assumed. Results show that only fungi are present in significantly higher concentrations in summer than in winter (2331 +/- 858 versus 329 +/- 95 CFU m(-3)). We also found that there are significantly more bacteria in the enclosed area, near the particle grids for incoming water, than in the unenclosed area near the aeration basins (9455 +/- 2661 versus 2435 +/- 985 CFU m(-3) in summer and 11 081 +/- 2299 versus 2002 +/- 839 CFU m(-3) in winter). All bioaerosols were frequently above the recommended values of occupational exposure. Workers carrying out special tasks such as cleaning tanks were exposed to very high levels of endotoxins (up to 500 EU m(-3)) compared to routine work. The species composition and concentration of airborne Gram-negative bacteria were also studied. A broad spectrum of different species within the Pseudomonadaceae and the Enterobacteriaceae families were predominant in nearly all plants investigated. [Authors]

Studies on survival, biological activities and behavior of Biomphalaria glabrata, the host snail of Schistosomiasis, submitted to increased hydrostatic pressure: a technique

To study changes in survival, in biological activities and behavior of planorbids submitted to increased hydrostatic pressure, we developed a technique using two transparent chambers and a hydraulic piston. The apparatus permitted renewal of the liquid medium without substantial variations in pressure, thus eliminating excretion products and maintaining the desired O2 level and thereby permitting us to evaluate the effects of pressure independently of the occurrence of anoxia. Pressure was maintained without any contact of the liquid medium with compressed air, a situation which reproduced with relative fidelity what occurs in nature and assured the presence of the same amounts of gases in the two observation chambers (Control and Experimental). Biomphalaria glabrata was found to be able to survive at least 48 hours when submitted to 49.02 x 10**4 Pa (equivalent to a water depth of 48.8 m), continuing to day egg masses and showing few behavioral changes when compared with the control group.

Consequences of the multipatient use of a single-patient capillary blood sampling device (CBSD)

Introduction/objectives: Multipatient use of a single-patient CBSD occurred inan outpatient clinic during 4 to 16 months before itsnotification. We looked for transmission of blood-bornepathogens among exposed patients.Methods: Exposed patients underwent serology testing for HBV,HCV and HIV. Patients with isolated anti-HBc receivedone dose of hepatitis B vaccine to look for a memoryimmune response. Possible transmissions were investigatedby mapping visits and sequencing of the viral genomeif needed.Results: Of 280 exposed patients, 9 had died without suspicionof blood-borne infection, 3 could not be tested, and 5declined investigations. Among the 263 (93%) testedpatients, 218 (83%) had negative results. We confirmeda known history of HCV infection in 6 patients (1 coinfectedby HIV), and also identified resolved HBVinfection in 37 patients, of whom 18 were alreadyknown. 2 patients were found to have a previouslyunknown HCV infection. According to the time elapsedfrom the closest previous visit of a HCV-infected potentialsource patient, we could rule out nosocomial transmissionin one case (14 weeks) but not in the other (1day). In the latter, however, transmission was deemedvery unlikely by 2 reference centers based on thesequences of the E1 and HVR1 regions of the virus.Conclusion: We did not identify any transmission of blood-bornepathogens in 263 patients exposed to a single-patientCBSD, despite the presence of potential source cases.Change of needle and disinfection of the device betweenpatients may have contributed to this outcome.Although we cannot exclude transmission of HBV, previousacquisition in endemic countries is a more likelyexplanation in this multi-national population.

Les traces de pneumatiques en sciences forensiques : de l'analyse chimique à l'évaluation de la force probante

This work is focused on the development of a methodology for the use of chemical characteristic of tire traces to help answer the following question: "Is the offending tire at the origin of the trace found on the crime scene?". This methodology goes from the trace sampling on the road to statistical analysis of its chemical characteristics. Knowledge about the composition and manufacture of tread tires as well as a review of instrumental techniques used for the analysis of polymeric materials were studied to select, as an ansi vi cal technique for this research, pyrolysis coupled to a gas Chromatograph with a mass spectrometry detector (Py-GC/MS). An analytical method was developed and optimized to obtain the lowest variability between replicates of the same sample. Within-variability of the tread was evaluated regarding width and circumference with several samples taken from twelve tires of different brands and/or models. The variability within each of the treads (within-variability) and between the treads (between-variability) could be quantified. Different statistical methods have shown that within-variability is lower than between-variability, which helped differentiate these tires. Ten tire traces were produced with tires of different brands and/or models by braking tests. These traces have been adequately sampled using sheets of gelatine. Particles of each trace were analysed using the same methodology as for the tires at their origin. The general chemical profile of a trace or of a tire has been characterized by eighty-six compounds. Based on a statistical comparison of the chemical profiles obtained, it has been shown that a tire trace is not differentiable from the tire at its origin but is generally differentiable from tires that are not at its origin. Thereafter, a sample containing sixty tires was analysed to assess the discrimination potential of the developed methodology. The statistical results showed that most of the tires of different brands and models are differentiable. However, tires of the same brand and model with identical characteristics, such as country of manufacture, size and DOT number, are not differentiable. A model, based on a likelihood ratio approach, was chosen to evaluate the results of the comparisons between the chemical profiles of the traces and tires. The methodology developed was finally blindly tested using three simulated scenarios. Each scenario involved a trace of an unknown tire as well as two tires possibly at its origin. The correct results for the three scenarios were used to validate the developed methodology. The different steps of this work were useful to collect the required information to test and validate the underlying assumption that it is possible to help determine if an offending tire » or is not at the origin of a trace, by means of a statistical comparison of their chemical profile. This aid was formalized by a measure of the probative value of the evidence, which is represented by the chemical profile of the trace of the tire. - Ce travail s'est proposé de développer une méthodologie pour l'exploitation des caractéristiques chimiques des traces de pneumatiques dans le but d'aider à répondre à la question suivante : «Est-ce que le pneumatique incriminé est ou n'est pas à l'origine de la trace relevée sur les lieux ? ». Cette méthodologie s'est intéressée du prélèvement de la trace de pneumatique sur la chaussée à l'exploitation statistique de ses caractéristiques chimiques. L'acquisition de connaissances sur la composition et la fabrication de la bande de roulement des pneumatiques ainsi que la revue de techniques instrumentales utilisées pour l'analyse de matériaux polymériques ont permis de choisir, comme technique analytique pour la présente recherche, la pyrolyse couplée à un chromatographe en phase gazeuse avec un détecteur de spectrométrie de masse (Py-GC/MS). Une méthode analytique a été développée et optimisée afin d'obtenir la plus faible variabilité entre les réplicas d'un même échantillon. L'évaluation de l'intravariabilité de la bande de roulement a été entreprise dans sa largeur et sa circonférence à l'aide de plusieurs prélèvements effectués sur douze pneumatiques de marques et/ou modèles différents. La variabilité au sein de chacune des bandes de roulement (intravariabilité) ainsi qu'entre les bandes de roulement considérées (intervariabilité) a pu être quantifiée. Les différentes méthodes statistiques appliquées ont montré que l'intravariabilité est plus faible que l'intervariabilité, ce qui a permis de différencier ces pneumatiques. Dix traces de pneumatiques ont été produites à l'aide de pneumatiques de marques et/ou modèles différents en effectuant des tests de freinage. Ces traces ont pu être adéquatement prélevées à l'aide de feuilles de gélatine. Des particules de chaque trace ont été analysées selon la même méthodologie que pour les pneumatiques à leur origine. Le profil chimique général d'une trace de pneumatique ou d'un pneumatique a été caractérisé à l'aide de huitante-six composés. Sur la base de la comparaison statistique des profils chimiques obtenus, il a pu être montré qu'une trace de pneumatique n'est pas différenciable du pneumatique à son origine mais est, généralement, différenciable des pneumatiques qui ne sont pas à son origine. Par la suite, un échantillonnage comprenant soixante pneumatiques a été analysé afin d'évaluer le potentiel de discrimination de la méthodologie développée. Les méthodes statistiques appliquées ont mis en évidence que des pneumatiques de marques et modèles différents sont, majoritairement, différenciables entre eux. La méthodologie développée présente ainsi un bon potentiel de discrimination. Toutefois, des pneumatiques de la même marque et du même modèle qui présentent des caractéristiques PTD (i.e. pays de fabrication, taille et numéro DOT) identiques ne sont pas différenciables. Un modèle d'évaluation, basé sur une approche dite du likelihood ratio, a été adopté pour apporter une signification au résultat des comparaisons entre les profils chimiques des traces et des pneumatiques. La méthodologie mise en place a finalement été testée à l'aveugle à l'aide de la simulation de trois scénarios. Chaque scénario impliquait une trace de pneumatique inconnue et deux pneumatiques suspectés d'être à l'origine de cette trace. Les résultats corrects obtenus pour les trois scénarios ont permis de valider la méthodologie développée. Les différentes étapes de ce travail ont permis d'acquérir les informations nécessaires au test et à la validation de l'hypothèse fondamentale selon laquelle il est possible d'aider à déterminer si un pneumatique incriminé est ou n'est pas à l'origine d'une trace, par le biais d'une comparaison statistique de leur profil chimique. Cette aide a été formalisée par une mesure de la force probante de l'indice, qui est représenté par le profil chimique de la trace de pneumatique.