Sleepless nights : the effect of socioeconomic status, physical activity, and lifestyle factors on sleep quality in a large cohort of Australian women

The aims of this study were to examine: (1) the association between sociodemographic and lifestyle factors and sleep quality in a population-based cohort of Australian women and (2) possible influence of reproductive status and mental and physical health factors on these associations. Data on 3,655 women (mean age046.6 years, range 34.3–67.4) were obtained from the Mater Hospital University of Queensland Study of Pregnancy for this cross-sectional study. Self-rated sleep quality was assessed using the Pittsburgh Sleep Quality Index. For the purpose of this study, two cutoff points (scores 5 and 10) were used to divide women into three categories: normal (65.2 %), moderately poor (26.4 %), and very poor sleep quality (8.5 %). Other covariates were measured at 21-year follow-up as well. After adjusting for reproductive status, mental and physical health, there were significant associations between moderately poor sleep quality and education and between very poor sleep quality and unemployment, both measures of socioeconomic status. In addition, work-related exertion was associated with increased rates of moderately poor sleep quality, whereas those women undertaking moderate exercise were less likely to experience very poor sleep quality. Independent associations between sociodemographic factors and exercise with moderately poor and very poor sleep quality were identified. These findings demonstrate the dynamic nature of the association between exercise/exertion, socioeconomic status, and sleep quality and highlight the importance of taking these into consideration when dealing with issues of poor sleep quality in women.

Improving power quality in low-voltage networks containing distributed energy resources

Severe power quality problems can arise when a large number of single-phase distributed energy resources (DERs) are connected to a low-voltage power distribution system. Due to the random location and size of DERs, it may so happen that a particular phase generates excess power than its load demand. In such an event, the excess power will be fed back to the distribution substation and will eventually find its way to the transmission network, causing undesirable voltage-current unbalance. As a solution to this problem, the article proposes the use of a distribution static compensator (DSTATCOM), which regulates voltage at the point of common coupling (PCC), thereby ensuring balanced current flow from and to the distribution substation. Additionally, this device can also support the distribution network in the absence of the utility connection, making the distribution system work as a microgrid. The proposals are validated through extensive digital computer simulation studies using PSCADTM

Information quality in social media : a conceptual model

Social Media (SM) is increasingly being integrated with business information in decision making. Unique characteristics of social media (e.g. wide accessibility, permanence, global audience, recentness, and ease of use) raise new issues with information quality (IQ); quite different from traditional considerations of IQ in information systems (IS) evaluation. This paper presents a preliminary conceptual model of information quality in social media (IQnSM) derived through directed content analysis and employing characteristics of analytic theory in the study protocol. Based in the notion of ‘fitness for use’, IQnSM is highly use and user centric and is defined as “the degree to which information is suitable for doing a specified task by a specific user, in a certain context”. IQnSM is operationalised as hierarchical, formed by the three dimensions (18 measures): intrinsic quality, contextual quality and representational quality. A research plan for empirically validating the model is proposed.

Designing a continuum of quality external cause of injury information in Queensland : from ambulance to hospital

This study is the first to employ an epidemiological framework to evaluate the ‘fit-for-purpose’ of ICD-10-AM external cause of injury codes, ambulance and hospital clinical documentation for injury surveillance. Importantly, this thesis develops an evidence-based platform to guide future improvements in routine data collections used to inform the design of effective injury prevention strategies. Quantification of the impact of ambulance clinical records on the overall information quality of Queensland hospital morbidity data collections for injury causal information is a unique and notable contribution of this study.

Improving the quality of fourth year civil engineering research projects through bibliographic instruction

Faculty and reference librarians at the Queensland University of Technology have collaborated in an attempt to improve the quality of literature reviews in civil engineering final -year research projects. This article describes the instructional program devised and the level of faculty support for the librarians' contribution, and presents survey results revealing how students could most benefit from BI and how the classroom collaboration affected student project work. The authors offer some observations about the possible impact of 81 in general, and on engineers in particular, which may provide a focus for future research.

Quality evaluation of Yin Chen Hao Tang extract based on fingerprint chromatogram and simultaneous determination of five bioactive constituents

A completely validated method based on HPLC coupled with photodiode array detector (HPLC-UV) was described for evaluating and controlling quality of Yin Chen Hao Tang extract (YCHTE). First, HPLC-UV fingerprint chromatogram of YCHTE was established for preliminarily elucidating amount and chromatographic trajectory of chemical constituents in YCHTE. Second, for the first time, five mainly bioactive constituents in YCHTE were simultaneously determined based on fingerprint chromatogram for furthermore controlling the quality of YCHTE quantitatively. The developed method was applied to analyze 12 batches of YCHTE samples which consisted of herbal drugs from different places of production, showed acceptable linearity, intraday (RSD <5%), interday precision (RSD <4.80%), and accuracy (RSD <2.80%). As a result, fingerprint chromatogram determined 15 representative general fingerprint peaks, and the fingerprint chromatogram resemblances are all better than 0.9996. The contents of five analytes in different batches of YCHTE samples do not indicate significant difference. So, it is concluded that the developed HPLC-UV method is a more fully validated and complete method for evaluating and controlling the quality of YCHTE.

Harmonic quality of multilevel cascade inverters with random carrier phase pulse width modulation

The output harmonic quality of N series connected full-bridge dc-ac inverters is investigated. The inverters are pulse width modulated using a common reference signal but randomly phased carrier signals. Through analysis and simulation, probability distributions for inverter output harmonics and vector representations of N carrier phases are combined and assessed. It is concluded that a low total harmonic distortion is most likely to occur and will decrease further as N increases.

Comparison of genomic DNA extraction techniques from whole blood samples : a time, cost and quality evaluation study

Genomic DNA obtained from patient whole blood samples is a key element for genomic research. Advantages and disadvantages, in terms of time-efficiency, cost-effectiveness and laboratory requirements, of procedures available to isolate nucleic acids need to be considered before choosing any particular method. These characteristics have not been fully evaluated for some laboratory techniques, such as the salting out method for DNA extraction, which has been excluded from comparison in different studies published to date. We compared three different protocols (a traditional salting out method, a modified salting out method and a commercially available kit method) to determine the most cost-effective and time-efficient method to extract DNA. We extracted genomic DNA from whole blood samples obtained from breast cancer patient volunteers and compared the results of the product obtained in terms of quantity (concentration of DNA extracted and DNA obtained per ml of blood used) and quality (260/280 ratio and polymerase chain reaction product amplification) of the obtained yield. On average, all three methods showed no statistically significant differences between the final result, but when we accounted for time and cost derived for each method, they showed very significant differences. The modified salting out method resulted in a seven- and twofold reduction in cost compared to the commercial kit and traditional salting out method, respectively and reduced time from 3 days to 1 hour compared to the traditional salting out method. This highlights a modified salting out method as a suitable choice to be used in laboratories and research centres, particularly when dealing with a large number of samples.

Visual guidance for fixed-wing unmanned aerial vehicles using feature tracking : application to power line inspection

This thesis presents novel vision based control solutions that enable fixed-wing Unmanned Aerial Vehicles to perform tasks of inspection over infrastructure including power lines, pipe lines and roads. This is achieved through the development of techniques that combine visual servoing with alternate manoeuvres that assist the UAV in both following and observing the feature from a downward facing camera. Control designs are developed through techniques of Image Based Visual Servoing to utilise sideslip through Skid-to-Turn and Forward-Slip manoeuvres. This allows the UAV to simultaneously track and collect data over the length of infrastructure, including straight segments and the transition where these meet.

Quality of life for older people in residential care is related to connectedness, willingness to enter care, and co-residents

Aim: To establish associations with quality of life (QOL) of older people in long-term residential care facilities in two New Zealand cities. Methods: The outcome measure of QOL was the Life Satisfaction Index. We used multiple linear regression to explore how broad categories of factors might contribute to QOL. Results: A total of 599 people (median age of 85 years; 74% women) participated. Response rates were 85% for facilities and 83% for residents. A resident's QOL was significantly related to the QOL of co-residents. QOL was higher for people who were more positive about entry to residential care, more physically able, and not depressed, and for those with more family and emotional support. Conclusion: Attending to the circumstances around entry to residential care may enhance QOL, as may promoting physical activity, treating depression and ensuring older people remain emotionally connected to their families. In choosing a facility, noting the QOL of co-residents is important.

Predictors of physical and mental health-related quality of life outcomes among myocardial infarction patients

Background Health-related quality of life (HRQoL) is an important outcome for patients diagnosed with coronary heart disease. This report describes predictors of physical and mental HRQoL at six months post-hospitalisation for myocardial infarction. Methods Participants were myocardial infarction patients (n=430) admitted to two tertiary referral centres in Brisbane, Australia who completed a six month coronary heart disease secondary prevention trial (ProActive Heart). Outcome variables were HRQoL (Short Form-36) at six months, including a physical and mental summary score. Baseline predictors included demographics and clinical variables, health behaviours, and psychosocial variables. Stepwise forward multiple linear regression analyses were used to identify significant independent predictors of six month HRQoL. Results Physical HRQoL was lower in participants who: were older (p<0.001); were unemployed (p=0.03); had lower baseline physical and mental HRQoL scores (p<0.001); had lower confidence levels in meeting sufficient physical activity recommendations (p<0.001); had no intention to be physically active in the next six months (p<0.001); and were more sedentary (p=0.001). Mental HRQoL was lower in participants who: were younger (p=0.01); had lower baseline mental HRQoL (p<0.001); were more sedentary (p=0.01) were depressed (p<0.001); and had lower social support (p=0.001). Conclusions This study has clinical implications as identification of indicators of lower physical and mental HRQoL outcomes for myocardial infarction patients allows for targeted counselling or coronary heart disease secondary prevention efforts. Trial registration Australian Clinical Trials Registry, Australian New Zealand Clinical Trials Registry, CTRN12607000595415. Keywords: Myocardial infarction; Secondary prevention; Cardiac rehabilitation; Telephone-delivered; Health-related quality of life; Health coaching; Tele-health

Open for Inspection? Julstar Pty Ltd v Lynch Morgan Lawyers [2012] QDC 272

In Julstar Pty Ltd v Lynch Morgan Lawyers [2012] QDC 272 Dorney QC DCJ considered whether an applicant for an assessment of all or part of their costs under s 335 of the Legal Profession Act 2007 (Qld) (LPA) must provide grounds on which they dispute the amount of the costs charged or their liability to pay them. His Honour also made an order for inspection of the solicitor’s file, despite a claimed lien for unpaid fees.

Quality assessment of service bundles for governmental one-stop portals : a literature review

Service bundles, in the context of e-government, are used to group services together that relate to a certain citizen need. These bundles can then be presented on a governmental one-stop portal to structure the available service offerings according to citizen expectations. In order to ensure that citizens utilise the one-stop portal and comprised service bundles for future transactions, the quality of these service bundles needs to be managed and maximised accordingly. Consequently, models and tools that focus on assessing service bundle quality play an important role, when it comes to increasing or retaining usage behaviour of citizens. This study focuses on providing a rigorous and structured literature review of e-government outlets with regards to their coverage of service bundle quality and e-service quality themes. The study contributes to academia and practice by providing a framework that allows structuring and classifying existing studies relevant for the assessment of quality for government portals. Furthermore, this study provides insights into the status quo of quality models that can be used by governments to assess the quality of their service bundles. Directions for future research and limitations of the present study are provided as well.

Effect of temperature distribution on predicting quality of microwave dehydrated food

During food drying, many other changes occur simultaneously, resulting in an improved overall quality. Among the quality attributes, the structure and its corresponding color influence directly or indirectly other properties of food. In addition, these quality attributes are affected by process conditions, material components and the raw structure of the foodstuff. In this work, the temperature distribution within food materials during microwave drying has been taken into consideration to observe its role in color modification. In order to determine the temperature distribution of microwave-dried food (apple), a thermal imaging camera has been used. The image acquired from the digital camera has been analysed using image J software in order to get the color change of fresh and dried apple. The results show that temperature distribution plays an important role in determining the quality of the food. The thermal imaging camera was deployed to observe the temperature distribution within food materials during drying. It is clearly observed from the higher value of (ERGB =102) and the uneven color change that uneven temperature distribution can influence customer perceptions of the quality of dried food. Simulation of a mathematical model of temperature distribution during microwave drying can make it possible to predict the colour and texture of the microwaved food.

Bending properties of Ag nanowires with pre-existing surface defects

Materials used in the engineering always contain imperfections or defects which significantly affect their performances. Based on the large-scale molecular dynamics simulation and the Euler–Bernoulli beam theory, the influence from different pre-existing surface defects on the bending properties of Ag nanowires (NWs) is studied in this paper. It is found that the nonlinear-elastic deformation, as well as the flexural rigidity of the NW is insensitive to different surface defects for the studied defects in this paper. On the contrary, an evident decrease of the yield strength is observed due to the existence of defects. In-depth inspection of the deformation process reveals that, at the onset of plastic deformation, dislocation embryos initiate from the locations of surface defects, and the plastic deformation is dominated by the nucleation and propagation of partial dislocations under the considered temperature. Particularly, the generation of stair-rod partial dislocations and Lomer–Cottrell lock are normally observed for both perfect and defected NWs. The generation of these structures has thwarted attempts of the NW to an early yielding, which leads to the phenomenon that more defects does not necessarily mean a lower critical force.