Utilização de resíduos de rochas ornamentais na produção de cerâmica branca

The marble and granite waste come from the process of mining of those ornamental rocks for use in the building industry. Brazil is one of the largest producers of blocks or finished products of ornamental rocks, extracting about 5.2 tons / year. The largest national producers are the states of Espírito Santo, Minas Gerais and Bahia which account for 80% of the Brazilian production. However, the waste total amount during processing of these blocks reaches 40% of the total. The use of the waste produced by this industry in white ceramics could be a form of disposition, because these materials, are thrownasa mud directly at decantation ponds, wastelands or in rivers, without any treatment. The present work has as main purpose to study the influence that reject of the ornamental rocks on the physical and mechanical properties of white ceramics. X-Ray characterizations of raw materials by were performed X-Ray fluorescence, X-Ray diffraction, granulometric, thermogravimetric and thermodiferencial analysis, five formulations were made (0, 10, 20, 30, 40% in granite weight) wich were burned at three temperatures: 1100°C, 1150°C and 1200ºC with 60 minutes of sorling time. After sintering, the samples were submitted to different analyser absorption of water, linear retraction, apparent porosity, apparent specific mass, flexival stronght, and scanning were obtained microscopy. Compatible technological properties within the limits demanded for the production of porcelainized stoneware

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Pontas de pulverização e eletrificação das gotas na deposição da calda em plantas de crisântemo

O objetivo deste trabalho foi avaliar a deposição das gotas de pulverização, dotadas de carga elétrica (eletrostática), em comparação à técnica de pulverização convencional em crisântemo, com uso de diferentes pontas de pulverização. O experimento foi conduzido em delineamento inteiramente ao acaso, com oito tratamentos: combinação das pontas TXVK-3, AXI 110015, AXI 12002 TWIN e AXI 11003, com duas técnicas de pulverização (com e sem eletrostática), e quatro repetições. Cada repetição foi representada por 12 plantas, às quais foram afixados papéis do tipo mata-borrão na superfície abaxial e adaxial dos folíolos, e em duas posições da planta: ápice e base. Um corante marcador (Rodamina B) foi pulverizado na proporção de 5 g por 100 L d'água em cada um dos tratamentos. Os depósitos do marcador foram quantificados por fluorometria. As pontas com gotas de menor diâmetro mediano volumétrico (TXVK-3 e AXI 110015) apresentaram maiores depósitos na superfície abaxial da folha, quando se utilizou a pulverização eletrostática. Esse fato não foi observado, quando foram pulverizadas gotas com maior diâmetro mediano volumétrico e desprovidas de carga elétrica, nas diferentes partes da planta.

Identificação e caracterização de um isolado de Hydrangea ringspot virus em hortênsia no Estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Molecular and biological characterization of Lettuce mosaic virus (LMV) isolates reveals a distinct and widespread type of resistance-breaking isolate: LMV-Most

Lettuce mosaic virus (LMV) causes an economically important seedborne and aphid-transmitted disease of lettuce and ornamental crops worldwide. The genetic diversity among 73 LMV isolates was examined based on a 216-nucleotide sequence at the variable region encoding the NIb-coat protein junction, Three clusters of LMV isolates were distinguished: LMV-Yar, LMV-Greck, and LMV-RoW. In the latter cluster, two subgroups of isolates, LMV-Common and LMV-Most, accounted for a large proportion of the LMV isolates analyzed. These two subgroups included the seedborne isolates, consistent with this property contributing a selective advantage and resulting in widespread distribution. In addition to being seedborne, LMV-Most isolates overcome the two resistance genes commonly used in lettuce, mol(1) and mol(2), and thus represent a potential threat to lettuce cultivation. The complete sequence of an LMV-Most isolate (LMV-AF199) was determined, allowing a better definition of the genetic relationships among LMV-Most, LMV-Common, and an additional isolate of the LMV-RoW cluster.

CHARACTERIZATION of RALSTONIA SOLANACEARUM STRAINS FROM BRAZIL USING MOLECULAR METHODS and PATHOGENICITY TESTS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Macronutrientes em cultivares de gérbera sob dois níveis de fertirrigação

A gérbera de vaso é uma planta ornamental conhecida mundialmente; entretanto, dispõem-se de reduzido volume de informações sobre suas técnicas de cultivo, em especial a nutrição e adubação, fatores essenciais para ganhos na qualidade produtiva. O presente trabalho teve por objetivo avaliar o teor e o acúmulo de macronutrientes em quatro cultivares de gérbera sob dois níveis de fertirrigação. O experimento foi conduzido em casa de vegetação, de maio a julho de 2006, na UNESP em Botucatu. O mesmo foi instalado em blocos casualizados e constituído de um fatorial 4x2, sendo 4 cultivares de gérbera (Cherry, Golden Yellow, Salmon Rose e Orange) e 2 concentrações de solução nutritiva (50% e 100%), correspondendo respectivamente às condutividades elétricas de 0,92 e 1,76 dS m-1, no período vegetativo e 1,07 e 2,04 dS m-1, no reprodutivo. Os nutrientes foram aplicados via fertirrigação, realizada manualmente, uma vez ao dia. Ao final dos períodos vegetativo e reprodutivo foram quantificados no tecido vegetal, os teores e os acúmulos dos macronutrientes. As demandas destes nutrientes foram diferenciadas entre as cultivares e a concentração da solução apresentou um efeito marcante no teor e acúmulo de N, P, Ca, Mg e S na planta. Os maiores acúmulos foram registrados no terço final do ciclo de produção, apresentando a seguinte ordem de absorção: K>N>Ca>Mg>P>S (415, 327, 33, 32, 20 mg planta-1).

Acúmulo de nutrientes em gérbera de vaso em função de fontes e doses de potássio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Composição florística da comunidade infestante em gramados de Paspalum notatum no município de Assis, SP

Os gramados de Paspalum notatum são os mais disseminados no Brasil, constituindo diferentes locais e propósitos. A infestação por plantas daninhas acarreta perda de qualidade estética quando a finalidade do gramado é ornamental. Com o objetivo de caracterizar a comunidade infestante em gramados de P. notatum no município de Assis/SP, foi realizado entre os meses de junho e julho de 2004 um levantamento florístico em áreas ensolaradas e sombreadas, sob copas de árvores. Cem amostras de 0,50 x 0,50 m foram coletadas nas duas condições de luminosidade (50 em áreas ensolaradas e 50 em áreas sombreadas), a partir das quais foram calculados os parâmetros freqüência, densidade, abundância, freqüência relativa, densidade relativa, abundância relativa e índice de valor de importância. Ao todo, foram identificadas 45 espécies de plantas daninhas, distribuídas em 15 famílias; Asteraceae apresentou o maior número de espécies nas condições ensolaradas e sombreadas. As espécies mais importantes nas áreas ensolaradas foram: Oxalis latifolia > Desmodium incanum > Cyperus flavus > Cyperus diffusus > Cyperus brevifolius; e nas áreas sombreadas: C. brevifolius > Alternanthera tenella > D. incanum > Elephantopus mollis > C. flavus. Para 80,0% das amostragens, a massa seca total da parte aérea das espécies de plantas daninhas não sofreu influência das condições ensolarada ou sombreada, constituindo uma produção máxima de aproximadamente 150 kg ha-1 para ambas as condições.

O discurso do grotesco na mídia digital

This study presents our research on the discourse of the grotesque in digital media, specifically in two blogs. We rely on the theoretical-conceptual and methodological discourse analysis of the French School. We analyzed a set of posts in the following blogs: Eu Sou Ryca and Cleycianne, and we did it based on some propositions on the discourse of the grotesque by Mikhail Bakhtin (1999a), Muniz Sodré and Raquel Paiva (2002), Wolfgang Kayser (2003) and Mary Russo (2000). The expressions of the grotesque analyzed in the blogs Eu Sou Ryca and Cleycianne result predominantly in humorous effect, obtained by means of irony and parodization, which calls for ridicule and relegation, through a strong tension between the beautiful and the ugly, the socially acceptable and the aberration, the taste for the strange and the aesthetically striking. The grotesque appears initially as a significant feature of ornamental paintings found in Roman caves in the late fifteenth century, and today it can be seen permeating from sculptures, paintings, literary works, talk shows for television, videos hosted in cyberspace, specifically in the collective domain of weblogs. This work seeks to analyze how the discourse of the grotesque constitutes the humorous process in its insertion in cyberspace

Adaptabilidade de híbridos entre Gossypium barbadense E G. hirsutum N contendo o gene cry1Ac

Hybrids among transgenic plants and related species are expected to occur if they are sympatric and when there are not crossing barriers; as is the case, in Brazil, of cry1Ac transgenic cotton and Gossypium barbadense. This species has been maintained as dooryard plants, and should be preserved as a genetic resource. Hybrids were evaluated about traits related to fitness, leading to infer about its chances of survivor and selection. A barbadense genotype collected at the state of Mato Grosso was outcrossed to the variety DP 404, containing the gene cry1Ac, and to the isoline DP 404. All the F1 individuals and 122 among 170 F2 individuals expressed the toxin, and presented levels of resistance to pink bollworm (Pectinophora gossypiella) and cotton leafworm (Alabama argillacea) equivalent to the transgenic parent and superior to the isoline, barbadense or non transgenic hybrids. The percentage of germination and number of days to germinate did not differ among genotypes. Anthesis of the first flower and opening of the first cotton boll occurred earlier for herbaceous cotton and F1 hybrids than F2 population in average; all the populations presented a number of days to flower and opening of the first boll smaller then barbadense. The highest plants were barbadenses, and herbaceus the smallest, with F1 and F2 populations presenting intermediary heights. The number of seeds per plants were superior for F1 hybrids an herbaceous cotton, F2 populations were in average intermediary; the barbadense genotype produced the smallest number of seeds per plant. Pink bollworm, mainly, and also cotton leafworm, are important barbadense pests, so the transgene positive effect could favor the selection of hybrids, and hence G. hirsutum genome, against the maintenance of pure G. barbadense genome. The selection may be influenced by the plant uses: the smaller size of hybrids when compared to the barbadense may lead them to be differentiated from these parents to which medicinal properties are attributed; on the other hand, the greater boll production may favor hybrids maintenance with the purpose of producing lamp wicks, or use as an ornamental or swab

Zoneamento geoambiental como subsídio ao planejamento territorial municipal: estudo de caso para Currais Novos/RN

This paper presents the master plan and geoenvironmental zoning natures as instruments of environmental planning and management. The discussion of territory environmental planning is guided by two directions: at first the environmental elements involved in planning and the another is the implementation of these instruments at the municipal territory. To analyze the planning directed of the municipal territory we consider the fragments of its, represented by country and urban. The master plan inside of the Estatuto da Cidade (City Statute) and the geoenvironmental zoning are directed to territorial environmental planning. Regarding of the master plan the first challenge has been the spacial area that the plan can cover. It is necessary to prepare master plans that could include all the territory. The environmental zoning are directed for the territory totality.In this sense, the geoenvironmental zoning of the Currais Novos was done in the totality of the municipal territory and guided by the environmental physics variables. The geoenvironmental zoning sets in a planning and ordering of the territory instrument based in the landscape analysis. Therefore grounded in the Geosystems‟s Theory this work has like a main objective to propose a geoenvironmental zoning for the Currais Novos Municipality in RN. So, was used an analysis technique suggested for Bardin (2010) and the Currais Novos‟s physical environment characterization through of the fieldwork and cartographic data vectorization, beyond the image‟s treatment SRTM. The geoenvironmental systems definitions were based in the suggestion of Cestaro, et al. (2007) support in Bertrand (1968). For both were identified five geoenvironmental systems: Borborema Plateau, Residual plateau, Chapada da Serra de Santana, semiarid river valley and lagoon valley and eleven geoenvironmental subsystems: Borborema Plateau Western Slope, Isolated Massif of the Borborema Plateau, Residual Crest, Residual Massif, Erosional Scarp of the Chapada, flat top plateau, fluvial plains, temporary river of the semiarid and ornamental water or sluice

Estudo integrado geológico/tecnológico de rochas ornamentais: os granitos flores e jacarandá, RN

The main purpose of the present study is to integrate a geological and technological investigation of ornamental rocks of the Flores and Jacarandá granites, which are located near the Afonso Bezerra city, in the north central part of the Rio Grande do Norte State. The study area encompasses four litho-stratigrafic units: a Gneiss-Migmatitic Complex(cristalline basement), which is mainly composed of banded gneisses, usually deformed as mylonitic rocks and with several migmatic features, an Augen Gneiss, which occurs as an elongated body that constitutes the Jacarandá granite, a small granite stock, which presents a semi-circular form, named Flores granite, composed of pink, fine to medium coarse rocks, and fine to coarse alluvial sediments, which form extensive areas of large fluvial deposits. The technological characterization of the Flores and Jacarandá granites, carried out through several tests, has as the main purpose the determination of petrographic, physical, and mechanic parameters that allowed the characterization of these rocks. The test followed procedures recommended by Brazilian (ABNT Associação Brasileira de Normas Técnicas) and foreigner institutions (ASTM American Society for Testing and Materials). The petrografhic analysis indicated that the rocks investigated are granite sensu estrictu, summing an average 85-90% modal. The Flores granite is the more felsic rock, which presents mafic content ∼ 10% and monzonitic composition. The Jacarandá granite is an Augen Gneiss rock that presents sienogranitic composition and mafic modal content ∼ 15%. Several technological tests carried out (alterability, physical indices, velocity of ultrasonic wave propagation, uniaxial compression, flection resistence, Amsler desgaste, and resistence to freezing and heating) indicated that parameters and values were identical for both granites investigated. These parameters and values are consistent with the Brazilian and international standards for siliciclastic rocks of ornamental use, as well as other Brazilian ornamental granites. The analysis of all results indicates that both the Flores and Jacarandá granites present good quality, and that they are indicated for ornamental use of revetment interior and exterior of buildings

Digestibilidade de alimentos protéicos e energéticos para fêmeas de beta

Foram avaliados os coeficientes de digestibilidade aparente de MS, PB, energia bruta (EB) e EE de alimentos protéicos (farelo de soja e farinha de peixe) e energéticos (fubá de milho e farelo de trigo) para beta (Betta splendens). Fêmeas adultas foram alojadas em gaiolas e mantidas em dois aquários de fibra de vidro (30 peixes/aquário) para alimentação e dois para coleta de fezes, ambos de formato cônico e com capacidade para 30 L. Os resultados dos coeficientes de digestibilidade aparente de MS, PB, EB e EE foram, respectivamente, de 69,43; 72,52; 67,91 e 55,50% para farelo de soja; 60,67; 51,15; 75,55 e 58,26% para farinha de peixe; 63,88; 87,16; 77,61 e 50,40% para fubá de milho; e 61,06; 93,37; 58,17 e 65,51% para farelo de trigo. Os resultados obtidos neste estudo permitem otimizar a formulação de dietas práticas balanceadas, economicamente viáveis para a espécie.

In vitro growth of Brassocattleya orchid hybrid in different concentrations of KNO3, NH4NO3 and benzylaminopurine

Entre as maiores aplicações da cultura de tecidos de plantas está a propagação massal de mudas de plantas ornamentais. O objetivo deste trabalho foi avaliar o cultivo in vitro de um híbrido de orquídea Brassocattleya em diferentes concentrações de NH4NO3, KNO3 e BAP. Foram utilizadas sementes do híbrido de orquídea Brassocattleya 'Pastoral' e as plantas foram cultivadas em meio MS com redução pela metade das fontes de P, Mg e Ca e adição de 25 g L-1 de sacarose, 100 mg L-1 de mio-inositol, 1,5 g L-1 de carvão ativo e 6,5 g L-1 de ágar-ágar, sendo o pH ajustado para 5,8. Como tratamentos foram usados quatro concentrações dos sais NH4NO3 e KNO3 (2x; 1x; ½ e ¼ do meio MS) e três concentrações de BAP (0,0; 0,5 e 1,0 mg L-1). Avaliou-se a multiplicação, o crescimento em altura, massa fresca e seca, além dos teores de açucares redutores na massa seca das mudas. Observou-se grande influência das doses de NH4NO3 e KNO3 sobre o crescimento em altura das mudas, massa fresca e seca e teores de açucares redutores em Bc. ('Pastoral' x Auto). A dose de ¼ da utilizada no meio MS promoveu aumento significativo do crescimento das plantas. Para multiplicação, houve melhor resultado com a dose de ½ dos sais NH4NO3 e KNO3 utilizados no meio MS e 1,0 mg L-1 de BAP.