CFD-modeling and Experiments of insulation debris transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes important with regard to reactor safety research for PWR and BWR, when considering the long-term behavior of emergency core cooling systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb/impinge on the emergency core cooling systems. Open questions of generic interest are the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow and the particle load on strainers and corresponding pressure drop. A joint research project on such questions is being performed in cooperation between the University of Applied Sciences Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation of particle transport phenomena in coolant flow and the development of CFD models for its description. While the experiments are performed at the University at Zittau/Görlitz, the theoretical modeling efforts are concentrated at Forschungszentrum Dresden-Rossendorf. In the current paper the basic concepts for CFD modeling are described and feasibility studies including the conceptual design of the experiments are presented.

Numerical and experimental investigations for insulation particle transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes more important with regard to reactor safety research for pressurized and boiling water reactors, when considering the long-term behaviour of emergency core coolant systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of a disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb or impinge on the emergency core cooling systems. Open questions of generic interest are for example the particle load on strainers and corresponding pressure-drop, the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow. A joint research project on such questions is being performed in cooperation with the University of Applied Science Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation and the development of computational fluid dynamic (CFD) models for the description of particle transport phenomena in coolant flow. While the experiments are performed at the University Zittau/Görlitz, the theoretical work is concentrated at Forschungszentrum Dresden-Rossendorf. In the present paper, the basic concepts for computational fluid dynamic (CFD) modelling are described and experimental results are presented. Further experiments are designed and feasibility studies were performed.

Vulnerability and disobedience:new repertoires in French environmental protests

The emergence of the counter-globalisation movement in France has been accompanied by an apparent diversification of social protest repertoires. Protest events carried out by groups associated with a wide array of issues have been remarkable for their use of spectacular and novel actions, while civil disobedience campaigns have been prominent features of environmental and civil rights protests in particular. Drawing on a number of examples of contemporary environmental and global justice campaigns, opposing advertising, four-wheeled drive vehicles, nuclear energy and, especially, open field trials of genetically modified crops, this article discusses the rise of such new forms of protest, placing them in the wider context of transformations in protest repertoires in France. It identifies key examples of innovation, before discussing the twin processes of diffusion and domestication that shape them. It is argued that, although transnational agents and processes are key determinants of repertoire innovation, it is vital to identify the national, movement and sectoral contexts and discourses which enable the naturalisation and legitimisation of new action forms.

The Kim Dynasty and North-East Asian security:breaking the cycle of crises?

Purpose—This article considers North Korea and the notion of crisis, by linking historical development over the Korean peninsula to the conflict resolution literature, and investigates why despite a large number of destabilizing events, a war involving Pyongyang has yet to erupt. Design/methodology—This article uses historical data and a framework developed by Aggarwal et al., in order to highlight patterns of interaction between states such as the United States, North Korea and South Korea, organizations such as the United Nations, as well as processes such as the Six- Party Talks and the Agreed Framework. The article then develops a crisis framework based on conflict resolution and negotiation literature, and applies it to three North Korean administrations. Findings—Findings suggest that an open- ended understanding of time (for all parties involved on the peninsula) leads to an impossibility to reach a threshold where full- scale war would be triggered, thus leaving parties in a stable state of crisis for which escalating moves and de- escalating techniques might become irrelevant. Practical implications—It is hoped that this article will help further endeavors linking conflict resolution theoretical frameworks to the Korean peninsula security situation. In the case of the Korean peninsula, time has been understood as open-ended, leading parties to a lingering state of heightened hostilities that oscillates toward war, but that is controlled enough not to reach it. In-depth analysis of particular security sectors such as nuclear energy, food security, or missile testing would prove particularly useful in understanding the complexity of the Korean peninsula situation to a greater extent. It is hoped that this paper will help further endeavours linking conflict resolution theoretical frameworks to the Korean peninsula security situation. Originality/value—This research suggests that regarding the Korean peninsula, time has been understood as open- ended, leading parties to a lingering state of heightened.

Análisis de la reglamentación europea, promulgada a raíz de los accidentes nucleares, y la determinación de la emisión gamma en alimentos importados

Novel scientific and technological progress require to seek new sources of electricity. Such response is, inter alia, nuclear energy. Nuclear power stations currently produce around a third of the electricity and 14% of the energy consumed in the European Union. A thorough aspect in the use and development of nuclear energy as power source is safety. Nuclear facilities are designed so that the probability of an accident that may affect people and environment was very low. Reasonably, preventive emergency plans take place in the own nuclear facilities in order to mitigate and minimize the consequences, and otherwise another emergency nuclear plans take place outside facilities. Monitoring programs are also conducted in the nearby nuclear facilities, according to the Recommendation reached on 8th June 2000 by the European Commission on the application of Article 36 of the Euratom Treaty for the checking of the levels of radioactivity in the environment, in order to assess the exposure to the whole population. The main objectives of these plans are to check the presence and evolution of radioactive elements and the radiation levels in the environment; to determinate the causes of its increase, if succeed; to estimate the radiological risk to the population; to set corrected measures, if necessary; to ensure legal compliance on the premises and; to verify the suitability of effluent monitoring program to detect radionuclides leaks and transfer to the environment...

Usability of clay mixed red mud in Hungarian building material production industry

The naturally occurring radionuclide (²²⁶Ra,²³²Th and⁴⁰K) content of building Materials (NORM) contributes to the total radiation dose experienced by humans. In this survey 27 clay and 68 red mud samples were surveyed with gamma spectrometry and screened according to European Basic Safety Standards (BSS) I-index. It was found that average I-index of clays was 0.6 (0.4–0.8) less than the I-index of 1, which makes them suitable for building material production. The average I-index of red mud 2.3 (1.3–3.0). The maximal mixing ratio of red mud was calculated, varied between 12 and 39 %, with 23 % average.

Preparation of Excitation Sources to Portable X-Ray Spectrometer by Recovering 241am from Radioactive Lightning Conductor

With the prohibition of the use of radioactive lightning conductor in Brazil, this material passed to be collected and stored as radioactive waste in the waste deposits of The Brazilian National Nuclear Energy Commission (CNEN). The majority of these lightning conductor used as radioactive source 241Am with activity varying of 1 the 5 mCi. In this work are presented preliminary studies by recovering of 241Am through the electroplating technique, in order to posterior use as sources to portable X-rays fluorescence spectrometer. The 241Am sources have been removed from lightning conductor and dissolved in acid solution. The solution presented an activity of 0,6 Ci L-1. Small amounts of this solution were added to some electrolytes and tested in order to evaluate optimum electrolyte for deposition of 241Am. It was studied as electrolytes: HNO3 (0,2 mol L-1), NH4Cl (5,0 mol L-1) and a mixture of KCN and K2CO3 (in the rate of 2,0 g of each per liter). Yields of up to 90% were obtained applied a current density of 50 mA cm-2.

Collimation of deuterium / 3-helium fusion products for advanced spacecraft propulsion and power

Current space exploration has transpired through the use of chemical rockets, and they have served us well, but they have their limitations. Exploration of the outer solar system, Jupiter and beyond will most likely require a new generation of propulsion system. One potential technology class to provide spacecraft propulsion and power systems involve thermonuclear fusion plasma systems. In this class it is well accepted that d-He3 fusion is the most promising of the fuel candidates for spacecraft applications as the 14.7 MeV protons carry up to 80% of the total fusion power while ‘s have energies less than 4 MeV. The other minor fusion products from secondary d-d reactions consisting of 3He, n, p, and 3H also have energies less than 4 MeV. Furthermore there are two main fusion subsets namely, Magnetic Confinement Fusion devices and Inertial Electrostatic Confinement (or IEC) Fusion devices. Magnetic Confinement Fusion devices are characterized by complex geometries and prohibitive structural mass compromising spacecraft use at this stage of exploration. While generating energy from a lightweight and reliable fusion source is important, another critical issue is harnessing this energy into usable power and/or propulsion. IEC fusion is a method of fusion plasma confinement that uses a series of biased electrodes that accelerate a uniform spherical beam of ions into a hollow cathode typically comprised of a gridded structure with high transparency. The inertia of the imploding ion beam compresses the ions at the center of the cathode increasing the density to the point where fusion occurs. Since the velocity distributions of fusion particles in an IEC are essentially isotropic and carry no net momentum, a means of redirecting the velocity of the particles is necessary to efficiently extract energy and provide power or create thrust. There are classes of advanced fuel fusion reactions where direct-energy conversion based on electrostatically-biased collector plates is impossible due to potential limits, material structure limitations, and IEC geometry. Thermal conversion systems are also inefficient for this application. A method of converting the isotropic IEC into a collimated flow of fusion products solves these issues and allows direct energy conversion. An efficient traveling wave direct energy converter has been proposed and studied by Momota , Shu and further studied by evaluated with numerical simulations by Ishikawa and others. One of the conventional methods of collimating charged particles is to surround the particle source with an applied magnetic channel. Charged particles are trapped and move along the lines of flux. By introducing expanding lines of force gradually along the magnetic channel, the velocity component perpendicular to the lines of force is transferred to the parallel one. However, efficient operation of the IEC requires a null magnetic field at the core of the device. In order to achieve this, Momota and Miley have proposed a pair of magnetic coils anti-parallel to the magnetic channel creating a null hexapole magnetic field region necessary for the IEC fusion core. Numerically, collimation of 300 eV electrons without a stabilization coil was demonstrated to approach 95% at a profile corresponding to Vsolenoid = 20.0V, Ifloating = 2.78A, Isolenoid = 4.05A while collimation of electrons with stabilization coil present was demonstrated to reach 69% at a profile corresponding to Vsolenoid = 7.0V, Istab = 1.1A, Ifloating = 1.1A, Isolenoid = 1.45A. Experimentally, collimation of electrons with stabilization coil present was demonstrated experimentally to be 35% at 100 eV and reach a peak of 39.6% at 50eV with a profile corresponding to Vsolenoid = 7.0V, Istab = 1.1A, Ifloating = 1.1A, Isolenoid = 1.45A and collimation of 300 eV electrons without a stabilization coil was demonstrated to approach 49% at a profile corresponding to Vsolenoid = 20.0V, Ifloating = 2.78A, Isolenoid = 4.05A 6.4% of the 300eV electrons’ initial velocity is directed to the collector plates. The remaining electrons are trapped by the collimator’s magnetic field. These particles oscillate around the null field region several hundred times and eventually escape to the collector plates. At a solenoid voltage profile of 7 Volts, 100 eV electrons are collimated with wall and perpendicular component losses of 31%. Increasing the electron energy beyond 100 eV increases the wall losses by 25% at 300 eV. Ultimately it was determined that a field strength deriving from 9.5 MAT/m would be required to collimate 14.7 MeV fusion protons from d-3He fueled IEC fusion core. The concept of the proton collimator has been proven to be effective to transform an isotropic source into a collimated flow of particles ripe for direct energy conversion.

Physico-chemical properties of sol-gel synthesized titanosilicates for the uptake of radionuclides from aqueous solutions

Harnessing the power of nuclear reactions has brought huge benefits in terms of nuclear energy, medicine and defence as well as risks including the management of nuclear wastes. One of the main issues for radioactive waste management is liquid radioactive waste (LRW). Different methods have been applied to remediate LRW, thereunder ion exchange and adsorption. Comparative studies have demonstrated that Na2Ti2O3SiO4·2H2O titanosilicate sorption materials are the most promising in terms of Cs+ and Sr2+ retention from LRW. Therefore these TiSi materials became the object of this study. The recently developed in Ukraine sol-gel method of synthesizing these materials was chosen among the other reported approaches since it allows obtaining the TiSi materials in the form of particles with size ≥ 4mm. utilizing inexpensive and bulk stable inorganic precursors and yielded the materials with desirable properties by alteration of the comparatively mild synthesis conditions. The main aim of this study was to investigate the physico-chemical properties of sol-gel synthesized titanosilicates for radionuclide uptake from aqueous solutions. The effect of synthesis conditions on the structural and sorption parameters of TiSi xerogels was planned to determine in order to obtain a highly efficient sorption material. The ability of the obtained TiSis to retain Cs+, Sr2+ and other potentially toxic metal cations from the synthetic and real aqueous solutions was intended to assess. To our expectations, abovementioned studies will illustrate the efficiency and profitability of the chosen synthesis approach, synthesis conditions and the obtained materials. X-ray diffraction, low temperature adsorption/desorption surface area analysis, X-ray photoelectron spectroscopy, infrared spectroscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy was used for xerogels characterization. The sorption capability of the synthesized TiSi gels was studied as a function of pH, adsorbent mass, initial concentration of target ion, contact time, temperature, composition and concentration of the background solution. It was found that the applied sol-gel approach yielded materials with a poorly crystalline sodium titanosilicate structure under relatively mild synthesis conditions. The temperature of HTT has the strongest influence on the structure of the materials and consequently was concluded to be the control factor for the preparation of gels with the desired properties. The obtained materials proved to be effective and selective for both Sr2+ and Cs+ decontamination from synthetic and real aqueous solutions like drinking, ground, sea and mine waters, blood plasma and liquid radioactive wastes.

"Os Conflitos ambientais em Portugal (1974-2015): uma breve retrospectiva"

In this chapter, the authors made a survey of the research undertaken by social scientists and their reflections on environmental conflicts in Portugal. In these, a critical discourse has emerged concerning, on the one hand, the weak public environmental awareness, and, on the other, the progressive obliteration of environmental movements and their institutionalization throughout the creation of different environmental groups and the incorporation of the “environment” in legislation and in political discourse. In a brief retrospective, we review several conflicts taking into account different relevant factors: level of mobilization, media attention received, organization, impact, and ideological reference they have had in Portugal since the seventies. We have particularly highlighted the movement against nuclear energy and the construction of dams, the pollution caused by intensive breeding, the expansion of eucalyptus plantations, the conflicts against “wild” forms of mining, the business of toxic waste, the expansion of the economy of the concrete, the installation of landfills, and the defense of the natural heritage. This survey has considered three periods: the 1970s, marked by the emergence and performance of ecological movements of different ideological extraction; the second half of the 1980s, marked by the institutionalization of the environment and the imposition of a new legal framework with impact on environmental policies resulting from the integration into the European Economic Community; and finally, a third period, from the 1990s to present, marked by increasing environmental media coverage, with a particular emphasis on environmental conflicts in a context of an increasing liberalization of economic activities and the expansion of extraction and of the concrete economy. This is also the period where the environment emerges in disputes over the uses of the territory as economic and asset value. Most of these conflicts arise from the activities of local agents or national environmental groups that quickly gain strong local roots and sometimes even have some success. However, their impact on the national and Community legislation seems to be less relevant.