Esterification of stearic acid with p-cresol over modified Indian bentonite clay catalysts

The esterification of stearic acid with p-cresol using modified Indian bentonite clay catalysts has been reported. The reaction was studied over exchanged clays, acid activated clays, exchanged acid activated clays, aluminium pillared clay, aluminium pillared acid activated clay, molecular sieve Al-MCM-41, zeolite H beta, ZrO2, S-ZrO2, p-TSA, montmorillonite K10, and montmorillonite KSF in o-xylene for 6 h. The catalysts were characterized by X-ray diffraction and surface area measurements. The acidity was determined by n-butylamine back-titration method and DRIFTS after pyridine adsorption. Acid activated Indian bentonite (AAIB) was found to be a better catalyst compared to other catalysts in the esterification of stearic acid with p-cresol.

Clonal propagation of Phyllanthus amarus: A hepatoprotector

Background: The micropropagation protocol for Phyllanthus amarus, an important medicinal herb used widely for the treatment of hepatitis in ethnomedicinal systems, was standardized with shoot tip and single node explants. Materials and Methods: The micropropagation was carried out for the hyperproducing ecotype (phyllanthin content 463.828 ppm; hypophyllanthin content: 75.469 ppm) collected from Aanaikatti, Coimbatore, and grown in mist chamber, CPMB, TNAU. For micropropagation studies, the leaves were trimmed off and the shoot tips (6 mm long) and nodal segments (single node) were used for initiation. Results: Shoot tips and single node explants gave a maximum of 6.00 and 7.00 multiple shoots per explant with Benzyl Amino Purine (BAP) (1.0mg/L mg/L). Upon subculturing, a shoot length of around 7 cm with an average of eight internodes per shoot was observed after 20 days in the elongation medium supplemented with BAP (0.2 mg/Lmg/L) and Indole Acetic Acid (IAA) (2.0 mg/L). Seven to ten adventitious roots developed when the elongated microshoots were cultured in half strength MS medium with Indole Butyric Acid (IBA) (2.0 mg/Lmg/L) and NAA (1.0 mg/L mg/L) in 15-20 days after transfer. The rooted shoots acclimatized successfully to field conditions. Conclusion: A method for successful micropropagation of the valuable medicinal plant was established which will provide a better source for continuous supply of plants for manufacturing drugs.

Transport in nanoporous zeolites: Relationships between sorbate size, entropy, and diffusivity

Molecular dynamics simulations have been performed on monatomic sorbates confined within zeolite NaY to obtain the dependence of entropy and self-diffusivity on the sorbate diameter. Previously, molecular dynamics simulations by Santikary and Yashonath J. Phys. Chem. 98, 6368 (1994)], theoretical analysis by Derouane J. Catal. 110, 58 (1988)] as well as experiments by Kemball Adv. Catal. 2, 233 (1950)] found that certain sorbates in certain adsorbents exhibit unusually high self-diffusivity. Experiments showed that the loss of entropy for certain sorbates in specific adsorbents was minimum. Kemball suggested that such sorbates will have high self-diffusivity in these adsorbents. Entropy of the adsorbed phase has been evaluated from the trajectory information by two alternative methods: two-phase and multiparticle expansion. The results show that anomalous maximum in entropy is also seen as a function of the sorbate diameter. Further, the experimental observation of Kemball that minimum loss of entropy is associated with maximum in self-diffusivity is found to be true for the system studied here. A suitably scaled dimensionless self-diffusivity shows an exponential dependence on the excess entropy of the adsorbed phase, analogous to excess entropy scaling rules seen in many bulk and confined fluids. The two trajectory-based estimators for the entropy show good semiquantitative agreement and provide some interesting microscopic insights into entropy changes associated with confinement.

Diffusion of pentane isomers in faujasite-type zeolites : NMR and molecular dynamics study

Diffusion of pentane isomers in zeolites NaX has been investigated using pulsed field gradient nuclear magnetic resonance (PFG-NMR) and molecular dynamics (MD) techniques respectively. Temperature and concentration dependence of diffusivities have been studied. The diffusivities obtained from NMR are roughly an order of magnitude smaller than those obtained from MD. The dependence of diffusivity on loading at high temperatures exhibits a type I behavior according to the classification of Karger and Pfeifer 1]. NMR diffusivities of the isomers exhibit the order D(n-pentane) > D(isopentane) > D(neopentane). The results from MD suggest that the diffusivities of the isomers follow the order D(n-pentane) < D(isopentane) < D(neopentane). The activation energies from NMR show E-a(n-pentane) < E-a(isopentane) < E-a(neopentane) whereas those from MD suggest the order E-a(n-pentane) > (isopentane) > E-a(neopentane). The latter follows the predictions of levitation effect whereas those of NMR appears to be due to the presence of defects in the zeolite crystals. The differences between diffusivities estimated by NMR and MD are attributed to the longer time and length scales sampled by the NMR technique, as compared to MD. (C) 2012 Elsevier Inc. All rights reserved.

Effect of adsorbate loading on selectivity during adsorption of C/C and C/C n-alkane binary mixtures in silicalite

Adsorption experiments of mixtures of long chain alkanes into silicalite under liquid phase conditions show selectivity inversion and azeotrope formation. These effects are due to the subtle interplay between the size of the adsorbed molecules and pore topology of the adsorbent. In this study, the selective uptake of lighter component during liquid phase adsorption of C/C and C/C n-alkane binary mixtures in the zeolite silicalite is understood through configurational bias grand-canonical Monte Carlo molecular simulation technique and a coarse-grained siting analysis. The simulations are conducted under conditions of low and intermediate levels of loading. The siting pattern of the adsorbates inside the zeolite pores explain the selectivity as seen in experiments.

Potential Application of Adsorptive Media to Enhance Phosphorus Uptake in Stormwater Basins and Wetlands at Lake Tahoe : literature review. Report to the University of California Davis Tahoe Research Group

Phosphorus removal by wetlands and basins in Lake Tahoe may be improved through designing these systems to filter storm water through media having higher phosphorus removal capabilities than local parent material. Substrates rich in iron, aluminum and calcium oftentimes have enhanced phosphorus removal. These substrates can be naturally occurring, byproducts of industrial or water treatment processes, or engineered. Phosphorus removal fundamentally occurs through chemical adsorption and/or precipitation and much of the phosphorus can be irreversibly bound. In addition to these standard media, other engineered substrates are available to enhance P removal. One such substrate is locally available in Reno and uses lanthanum coated diatomaceous earth for arsenate removal. This material, which has a high positive surface charge, can also irreversibly remove phosphorus. Physical factors also affect P removal. Specifically, specific surface area and particle shape affect filtration capacity, contact area between water and the surface area, and likelihood of clogging and blinding. A number of substrates have been shown to effectively remove P in case studies. Based upon these studies, promising substrates include WTRs, blast furnace slag, steel furnace slag, OPC, calcite, marble Utelite and other LWAs, zeolite and shale. However, other nonperformance factors such as environmental considerations, application logistics, costs, and potential for cementification narrow the list of possible media for application at Tahoe. Industrial byproducts such as slags risk possible leaching of heavy metals and this potential cannot be easily predicted. Fly ash and other fine particle substrates would be more difficult to apply because they would need to be blended, making them less desirable and more costly to apply than larger diameter media. High transportation costs rule out non-local products. Finally, amorphous calcium products will eventually cementify reducing their effectiveness in filtration systems. Based upon these considerations, bauxite, LWAs and expanded shales/clays, iron-rich sands, activated alumina, marble and dolomite, and natural and lanthanum activated diatomaceous earth are the products most likely to be tested for application at Tahoe. These materials are typically iron, calcium or aluminum based; many have a high specific surface area; and all have low transportation costs. (PDF contains 21 pages)

Catalytic Cracking and Heat Sink Capacity of Aviation Kerosene Under Supercritical Conditions

Catalytic cracking of China no. 3 aviation kerosene using a zeolite catalyst was investigated under supercritical conditions. A three-stage heating/cracking system was specially designed to be capable of heating 0.8 kg kerosene to a temperature of 1050 K and pressure of 7.0 MPa with maximum mass flow rate of 80 g/s. Sonic nozzles of different diameters were used to calibrate and monitor the mass flow rate of the cracked fuel mixture. With proper experiment arrangements, the mass flow rate per unit throat area of the cracked fuel mixture was found to well correlate with the extent of fuel conversion. The gaseous products obtained from fuel cracking under different conditions were also analyzed using gas chromatography. Composition analysis showed that the average molecular weight of the resulting gaseous products and the fuel mass conversion percentage were a strong function of the fuel temperature and were only slightly affected by the fuel pressure. The fuel conversion was also shown to depend on the fuel residence time in the reactor, as expected. Furthermore, the heat sink levels due to sensible heating and endothermic cracking were determined and compared at varying test conditions. It was found that at a fuel temperature of similar to 1050 K, the total heat sink reached similar to 3.4 MJ/kg, in which chemical heat sink accounted for similar to 1.5 MJ/kg.

Produção in vitro e criopreservação de raízes de Cleome rosea Vahl (Capparaceae)

Cleome rosea é uma espécie nativa, de porte herbáceo, ocorrente em restingas brasileiras. Estudos recentes têm revelado o potencial medicinal da espécie para importantes propriedades farmacológicas, como por exemplo, as atividades anti-inflamatória, antigenotóxica, antiviral e antibacteriana. Porém, nos últimos anos, C. rosea não tem sido encontrada em várias regiões de seu ambiente natural, devido, principalmente, às ações antrópicas. Dessa forma, torna-se relevante o desenvolvimento de métodos de conservação que permitam o estudo e exploração das propriedades medicinais da espécie. O cultivo in vitro de raízes representa uma forma eficiente para produção de biomassa, devido ao rápido crescimento, produção estável de metabólitos, além de representar uma potencial fonte de explantes para a propagação em massa de diferentes espécies. O presente trabalho teve como objetivo a produção in vitro de culturas de raízes de C. rosea, associada à criopreservação, como forma de manutenção em longo prazo das culturas, monitorada através da análise de estabilidade genética. As culturas estabelecidas a partir de explantes radiculares de plantas propagadas in vitro de C. rosea demonstraram excelente capacidade de multiplicação de raízes em meio de cultura suplementado com o fitorregulador ANA, com manutenção dessa capacidade ao longo de sucessivas subculturas. Associado a esses resultados, o estabelecimento de protocolos de criopreservação pelo método de vitrificação resultou em elevados valores de frequência de recuperação do material após congelamento em nitrogênio líquido com as soluções de vitrificação PVS2 e PVS3. Os estudos de monitoramento da estabilidade genética, pela técnica de marcadores moleculares RAPD, revelaram a presença de polimorfismos significativos em uma das três culturas iniciadas a partir de raízes de C. rosea criopreservadas. Esses resultados demonstram as possibilidades de produção de raízes de C. rosea e conservação em longo prazo através da criopreservação, iniciando estudos inéditos para a espécie.

Análise de unidades de pré-purificação de ar por adsorção

Os principais constituintes do ar, nitrogênio, oxigênio e argônio, estão cada vez mais presentes nas indústrias, onde são empregados nos processos químicos, para o transporte de alimentos e processamento de resíduos. As duas principais tecnologias para a separação dos componentes do ar são a adsorção e a destilação criogênica. Entretanto, para ambos os processos é necessário que os contaminantes do ar, como o gás carbônico, o vapor dágua e hidrocarbonetos, sejam removidos para evitar problemas operacionais e de segurança. Desta forma, o presente trabalho trata do estudo do processo de pré-purificação de ar utilizando adsorção. Neste sistema a corrente de ar flui alternadamente entre dois leitos adsorvedores para produzir ar purificado continuamente. Mais especificamente, o foco da dissertação corresponde à investigação do comportamento de unidades de pré-purificação tipo PSA (pressure swing adsorption), onde a etapa de dessorção é realizada pela redução da pressão. A análise da unidade de pré-purificação parte da modelagem dos leitos de adsorção através de um sistema de equações diferenciais parciais de balanço de massa na corrente gasosa e no leito. Neste modelo, a relação de equilíbrio relativa à adsorção é descrita pela isoterma de Dubinin-Astakhov estendida para misturas multicomponentes. Para a simulação do modelo, as derivadas espaciais são discretizadas via diferenças finitas e o sistema de equações diferenciais ordinárias resultante é resolvido por um solver apropriado (método das linhas). Para a simulação da unidade em operação, este modelo é acoplado a um algoritmo de convergência relativo às quatro etapas do ciclo de operação: adsorção, despressurização, purga e dessorção. O algoritmo em questão deve garantir que as condições finais da última etapa são equivalentes às condições iniciais da primeira etapa (estado estacionário cíclico). Desta forma, a simulação foi implementada na forma de um código computacional baseado no ambiente de programação Scilab (Scilab 5.3.0, 2010), que é um programa de distribuição gratuita. Os algoritmos de simulação de cada etapa individual e do ciclo completo são finalmente utilizados para analisar o comportamento da unidade de pré-purificação, verificando como o seu desempenho é afetado por alterações nas variáveis de projeto ou operacionais. Por exemplo, foi investigado o sistema de carregamento do leito que mostrou que a configuração ideal do leito é de 50% de alumina seguido de 50% de zeólita. Variáveis do processo foram também analisadas, a pressão de adsorção, a vazão de alimentação e o tempo do ciclo de adsorção, mostrando que o aumento da vazão de alimentação leva a perda da especificação que pode ser retomada reduzindo-se o tempo do ciclo de adsorção. Mostrou-se também que uma pressão de adsorção maior leva a uma maior remoção de contaminantes.

Imidazolium-Based Organic Structure Directing Agents for the Synthesis of Microporous Materials

The central theme of this thesis is the use of imidazolium-based organic structure directing agents (OSDAs) in microporous materials synthesis. Imidazoliums are advantageous OSDAs as they are relatively inexpensive and simple to prepare, show robust stability under microporous material synthesis conditions, have led to a wide range of products, and have many permutations in structure that can be explored. The work I present involves the use of mono-, di-, and triquaternary imidazolium-based OSDAs in a wide variety of microporous material syntheses. Much of this work was motivated by successful computational predictions (Chapter 2) that led me to continue to explore these types of OSDAs. Some of the important discoveries with these OSDAs include the following: 1) Experimental evaluation and confirmation of a computational method that predicted a new OSDA for pure-silica STW, a desired framework containing helical pores that was previously very difficult to synthesize. 2) Discovery of a number of new imidazolium OSDAs to synthesize zeolite RTH, a zeolite desired for both the methanol-to-olefins reaction as well as NOX reduction in exhaust gases. This discovery enables the use of RTH for many additional investigations as the previous OSDA used to make this framework was difficult to synthesize, such that no large scale preparations would be practical. 3) The synthesis of pure-silica RTH by topotactic condensation from a layered precursor (denoted CIT-10), that can also be pillared to make a new framework material with an expanded pore system, denoted CIT-11, that can be calcined to form a new microporous material, denoted CIT-12. CIT-10 is also interesting since it is the first layered material to contain 8 membered rings through the layers, making it potentially useful in separations if delamination methods can be developed. 4) The synthesis of a new microporous material, denoted CIT-7 (framework code CSV) that contains a 2-dimensional system of 8 and 10 membered rings with a large cage at channel intersections. This material is especially important since it can be synthesized as a pure-silica framework under low-water, fluoride-mediated synthesis conditions, and as an aluminosilicate material under hydroxide mediated conditions. 5) The synthesis of high-silica heulandite (HEU) by topotactic condensation as well as direct synthesis, demonstrating new, more hydrothermally stable compositions of a previously known framework. 6) The synthesis of germanosilicate and aluminophosphate LTA using a triquaternary OSDA. All of these materials show the diverse range of products that can be formed from OSDAs that can be prepared by straightforward syntheses and have made many of these materials accessible for the first time under facile zeolite synthesis conditions.

Criação de mesoporos em zeólitas ZSM-5, mordenita e ferrierita e análise de seu efeito na reação de hidroisomerização do n-heptano

As zeólitas têm recebido grande atenção acadêmica e industrial devido às suas características ácidas e estruturais. A estrutura da zeólita pode ser utilizada para conduzir uma reação catalítica na direção do produto desejado, evitando assim reações paralelas. Porém, essa mesma estrutura cria restrições difusivas com relação ao acesso aos sítios ativos no interior dos microporos. Neste trabalho foram estudados dois métodos de criação de mesoporos (térmico e básico) com o intuito de modificar a acessibilidade aos sítios catalíticos das zeólitas. A reação de hidroisomerização do n-heptano foi selecionada para avaliar as zeólitas após a criação de mesoporosidade. O tratamento térmico (via calcinação em temperaturas elevadas) foi utilizado para as zeólitas do tipo ZSM-5, Mordenita e Ferrierita, tendo sido observado um aumento pouco significativo na mesoporosidade. Este tratamento promoveu, porém, uma significativa desaluminização das amostras, acompanhada da formação de quantidades importantes de espécies de Al extra-rede (ALER), o que se refletiu num bloqueio parcial dos mesoporos gerados e dos microporos preexistentes, e na redução na densidade de sítios ácidos das amostras. A ampliação da escala do tratamento térmico (aumento da quantidade tratada de 2 g para 30 g) não se mostrou reprodutível, gerando menos mesoporos do que o observado no preparo em pequena escala. O tratamento básico (via dessilicação por meio de NaOH), ao contrário do anterior, promoveu a formação de mesoporos gerando menos quantidade de ALER e se mostrou mais reprodutível quando da ampliação da escala. O desempenho dos catalisadores Pt/Al2O3+zeólita na reação de hidroisomerização do n-heptano foi influenciado pela densidade de sítios ácidos fortes e pela estrutura porosa da zeólita. Com relação ao efeito dos tratamentos térmico e básico sobre o desempenho dos catalisadores à base de ZSM-5, os resultados mostraram que o comportamento do catalisador submetido ao tratamento básico (Pt/Al2O3+BZSM-5/85-2) foi similar ao do tratado termicamente (Pt/Al2O3+TZSM-5/1000-2) com relação à distribuição de produtos na reação de hidroisomerização do n-heptano, particularmente com relação aos produtos leves e aos isômeros monorramificados. No entanto, a presença mais significativa de mesoporos na zeólita após tratamento básico (BZSM-5/85-2), se refletiu num leve favorecimento à formação dos isômeros birramificados

Transformação de metanol em olefinas leves catalisada por zeólitas HZSM-5

A reação de transformação de MeOH em olefinas leves foi investigada sobre zeólitas HZSM-5 com razões SiO2/Al2O3 (SAR) iguais a 30, 80 e 280. As propriedades ácidas e texturais da amostra com SAR 30 foram modificadas por impregnação com ácido fosfórico. A caracterização físico-química das amostras foi realizada empregando-se as técnicas de FRX, fisissorção de N2, DRX, DTP de NH3 e IV com adsorção de piridina. O desempenho catalítico das mesmas foi comparado tanto em condições reacionais similares (mesma T, pressão parcial de MeOH e WHSV) como em condições de isoconversão. Verificou-se, que quanto maior a SAR da zeólita, menor a densidade total e a força dos sítios ácidos presentes, sendo este efeito mais significativo para os sítios de Brönsted. O efeito do aumento da SAR favoreceu a estabilidade catalítica e a formação de olefinas leves, principalmente propeno. No caso das amostras contendo fósforo, foi observada uma redução linear na área específica BET e no volume de microporos com o aumento do teor de fósforo. Estes resultados, aliados aos obtidos por DRX, sugerem que a redução mais significativa na área específica e no volume de microporos pode ser associada à redução na cristalinidade e à formação de espécies amorfas contendo fósforo, que bloqueariam a estrutura porosa da zeólita. Não se observou alteração significativa na força dos sítios fracos, enquanto a força dos sítios fortes diminuiu significativamente. As amostras apresentando menor SAR e menor teor de fósforo foram mais ativas. Por outro lado, em condições de isoconversão de 916%, a amostra mais seletiva à formação de olefinas foi aquela com maior SAR. Dentre as amostras impregnadas, aquela contendo 4% de fósforo foi a mais seletiva a propeno, enquanto a que continha 6% foi mais seletiva a eteno. A amostra com SAR igual a 280 foi investigada variando-se a temperatura de reação (400, 500 e 540C) e a pressão parcial de metanol (0,038; 0,083 e 0,123 atm), através de um planejamento experimental do tipo Box-Benhnken (32). O rendimento otimizado em olefinas leves foi alcançado a 480C e 0,08 atm. O modelo proposto descreveu bem os dados experimentais e evidenciou a existência de uma faixa ótima de temperatura para maximização do rendimento em propeno e eteno, o qual foi também afetado pela pressão parcial de MeOH na faixa estudada. Palavras-chave: ZSM-5, olefinas, propeno, eteno, processo MTO, fósforo.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Cultura de tecidos, análise fitoquímica e avaliação da atividade biológica de Arachis villosulicarpa Hoehne

O amendoim cultivado (Arachis hypogaea) possui várias substâncias com capacidade antioxidante que apresentam efeitos benéficos para a saúde humana. Entretanto, a produção dessas substâncias ainda não foi observada em outras espécies do gênero. O objetivo deste trabalho foi o estabelecimento de sistemas de cultura in vitro para Arachis villosulicarpa, visando o desenvolvimento de alternativas para a produção metabólitos especiais. Segmentos nodais, internodais e foliares foram excisados de plantas in vitro e inoculados em meio MS suplementado com BAP, ANA, PIC ou 2,4-D. Os explantes apresentaram respostas distintas de acordo com o regulador de crescimento utilizado. Na presença de PIC, foi observada a formação de calos friáveis levemente oxidados em todos os explantes. Por outro lado, quando cultivados na presença de BAP ou 2,4-D, os explantes apresentaram a formação de calos compactos, com formação de brotos em diferentes taxas. Na presença de ANA, segmentos nodais e internodais não apresentaram resposta, enquanto que segmentos foliares apresentaram a formação de raízes adventícias em todas as concentrações testadas. Neste trabalho foi realizado uma avaliação comparativa da produção de metabólitos especiais e da atividade biológica em extratos de calos oriundos de folíolos inoculados em BAP 8,8 M, plantas in vitro e plantas ex vitro . Nas análises por meio do HPTLC e do HPLC foi possível demonstrar a diferença na produção de algumas substâncias e indicar a presença de flavonóides e polifenóis nos materiais analisados. Além disso, a partir das atividades biológicas foi possível identificar tanto a atividade antioxidante quanto a não mutagênica dos extratos. Dessa forma, estudos visando à detecção de metabólitos especiais em A. villosulicarpa podem expandir o conhecimento sobre as possibilidades de utilização de espécies do gênero Arachis.

Cultura de tecidos e conservação in vitro de Passiflora foetida L.

O gênero Passiflora ocorre principalmente em regiões de clima tropical, sendo o Brasil um importante centro de diversidade. Passiflora foetida L. é uma espécie silvestre que apresenta características de interesse ornamental e medicinal. O objetivo deste trabalho foi o estabelecimento de sistemas de cultura de tecidos e criopreservação para P. foetida. Explantes caulinares foram excisados de culturas primárias obtidas a partir de plântulas derivadas da germinação in vitro. Para isso foram inoculados em meio MSM, suplementado com diferentes concentrações de ANA, PIC, TDZ e BAP utilizado isoladamente ou em combinação com ANA, e mantidos na presença ou ausência de luz. Foi observada a produção de brotos, calos e raízes adventícias, de acordo com o tipo e a concentração do regulador de crescimento testado e da condição de cultura utilizada. A produção de plantas ocorreu via organogênese direta e indireta em resposta a BAP, enquanto que a formação de calos não morfogênicos foi observada a partir de ambos explantes em resposta a PIC. A produção de raízes adventícias ocorreu em resposta a ANA. Tendo em vista a produção de raízes observada em meio sólido, segmentos internodais foram inoculados em meio líquido suplementado com diferentes auxinas e mantidos em imersão contínua ou sobre pontes de papel de filtro. A maior taxa de multiplicação de raízes foi observada a partir de entrenós mantidos no sistema de ponte de papel de filtro, em resposta a ANA. Segmentos radiculares excisados das culturas primárias também foram utilizados visando à produção de brotos e a multiplicação de raízes. Contudo, apenas foi observada a formação de gemas, sem posterior desenvolvimento de brotos. Além disso, a capacidade proliferativa dos segmentos radiculares inoculados em meio suplementado com ANA foi menor que a obtida a partir dos entrenós cultivados nas mesmas condições. Neste trabalho, foram também testados diferentes protocolos de criopreservação para ápices caulinares de P. foetida por meio de vitrificação e encapsulamento-vitrificação. A recuperação de plantas pós-congelamento foi observada unicamente a partir de ápices encapsulados e expostos à solução de vitrificação PVS2 por 120 minutos. Tendo em vista o potencial medicinal já descrito para P. foetida, através dos diferentes sistemas de cultura desenvolvidos neste trabalho serão obtidos materiais para a avaliação de diferentes atividades biológicas.