Geology of the NW Indian Himalaya

This review paper deals with the geology of the NW Indian Himalaya situated in the states of Jammu and Kashmir, Himachal Pradesh and Garhwal. The models and mechanisms discussed, concerning the tectonic and metamorphic history of the Himalayan range, are based on a new compilation of a geological map and cross sections, as well as on paleomagnetic, stratigraphic, petrologic, structural, metamorphic, thermobarometric and radiometric data. The protolith of the Himalayan range, the North Indian flexural passive margin of the Neo-Tethys ocean, consists of a Lower Proterozoic basement, intruded by 1.8-1.9 Ga bimodal magmatites, overlain by a horizontally stratified sequence of Upper Proterozoic to Paleocene sediments, intruded by 470-500 Ma old Ordovician mainly peraluminous s-type granites, Carboniferous tholeiitic to alkaline basalts and intruded and overlain by Permian tholeiitic continental flood basalts. No elements of the Archaen crystalline basement of the South Indian shield have been identified in the Himalayan range. Deformation of the Himalayan accretionary wedge resulted from the continental collision of India and Asia beginning some 65-55 Ma ago, after the NE-directed underthrusting of the Neo-Tethys oceanic crust below Asia and the formation of the Andean-type 103-50 (-41) Ma old Ladakh batholith to the north of the Indus Suture. Cylindrical in geometry, the Himalayan range consists, from NE to SW, from older to younger tectonic elements, of the following zones: 1) The 25 km wide Ladakh batholith and the Asian mantle wedge form the backstop of the growing Himalayan accretionary wedge. 2) The Indus Suture zone is composed of obducted slices of the oceanic crust, island arcs, like the Dras arc, overlain by Late Cretaceous fore arc basin sediments and the mainly Paleocene to Early Eocene and Miocene epi-sutural intra-continental Indus molasse. 3) The Late Paleocene to Eocene North Himalayan nappe stack, up to 40 km thick prior to erosion, consists of Upper Proterozoic to Paleocene rocks, with the eclogitic and coesite bearing Tso Morari gneiss nappe at its base. It includes a branch of the Central Himalayan detachment, the 22-18 Ma old Zanskar Shear zone that is intruded and dated by the 22 Ma Gumburanjun leucogranite; it reactivates the frontal thrusts of the SW-verging North Himalayan nappes. 4) The late Eocene-Miocene SW-directed High Himalayan or ``Crystalline'' nappe comprises Upper Proterozoic to Mesozoic sediments and Ordovician granites, identical to those of the North Himalayan nappes. The Main Central thrust at its base was created in a zone of Eocene to Early Oligocene anatexis by ductile detachment of the subducted Indian crust, below the pre-existing 25-35 km thick NE-directed Shikar Beh and SW-directed North Himalayan nappe stacks. 5) The late Miocene Lesser Himalayan thrust with the Main Boundary Thrust at its base consists of early Proterozoic to Cambrian rocks intruded by 1.8-1.9 Ga bimodal magmatites. The Subhimalaya is a thrust wedge of Himalayan fore deep basin sediments, composed of the Early Eocene marine Subathu marls and sandstones as well as the up to 8'000 m-thick Miocene to recent Ganga molasse, a coarsening upwards sequence of shales, sandstones and conglomerates. The active frontal thrust is covered by the sediments of the Indus-Ganga plains.

Foreign trade traps in the european periphery: Spain, 1870-1913

In this article we research into the difficulties that foreign trade imposed onSpanish process of integration into the international economy in the years priorto the First World War. We start out by examining some features of the foreigntrade structure of the country. By means of an econometric analysis of importand export series, it is possible to observe the presence of a trend towards tradedeficit, which was in force when Spain grew at a rate similar to that of itstrading partners. We also check that, in the absence of these compensatorymechanisms, adjustment in foreign payments could be reached by means ofprotective measures and the exchange rate.

New Estimates of Regional GDP in Spain, 1860-1930

This paper presents a new regional database on GDP in Spain for the years 1860, 1900, 1914 and 1930. Following Geary and Stark (2002), country level GDP estimates are allocated across Spanish provinces. The results are then compared with previous estimates. Further, this new evidence is used to analyze the evolution of regional inequality and convergence in the long run. According to the distribution dynamics approach suggested by Quah (1993, 1996) persistence appears as a main feature in the regional distribution of output. Therefore, in the long run no evidence of regional convergence in the Spanish economy is found.

The determinants of industrial location in Spain, 1856-1929

Durant el segle XIX, l'economia espanyola va transitar per les primeres etapes de la industrialització. Aquest procés es va donar en paral·lel a la integració del mercat domèstic de béns i factors, en un moment en què les reformes liberals i la construcció de la xarxa ferroviària, entre d'altres, van generar una important caiguda en els costos detransport. Al mateix temps que es donava aquesta progressiva integració del mercat domèstic espanyol, es van produir canvis significatius en la pauta de localització industrial. D'una banda, hi hagué un augment considerable de la concentració espacial de la indústria des de mitjans de segle XIX i fins a la Guerra Civil, i d¿altra, un increment de l'especialització regional. Ara bé, quines van ser les forces que van generar aquests canvis? Des d¿un punt de vista teòric, el model de Heckscher-Ohlin suggereix que la distribució a l'espai de l¿activitat econòmica ve determinada per l'avantatge comparativa dels territoris en funció de la dotació relativa de factors. Al seu torn, els models de Nova Geografia Econòmica (NEG) mostren l'existència d'una relació en forma de campana entre el procés d'integració econòmica i el grau de concentració geogràfica de l'activitat industrial. Aquest article examina empíricament els determinants de la localització industrial a Espanya entre 1856 i 1929, mitjançant l'estimació d¿un model que combina els elements de tipus Heckscher-Ohlin i els factors apuntats des de la NEG, amb l'objectiu de contrastar la força relativa dels arguments vinculats a aquestes dues interpretacions a l'hora de modular la localització de la indústria a Espanya. L'anàlisi dels resultats obtinguts mostra que tant la dotació de factors com els mecanismes de tipus NEG van ser elements determinants que expliquen la distribució geogràfica de la indústria des del segle XIX, tot i que la seva força relativa va anar variant amb el temps.

An agency-oriented model to explain vine-growing specialization in the province of Barcelona (Catalonia, Spain) in the mid-nineteenth century

[cat] En aquest treball presentem un model per explicar el procés d’especialització vitícola assolit als municipis de la província de Barcelona, a mitjans del s. XIX,que cerca entendre com va sorgir històricament un avantatge comparatiu fruit d’un procés que esdevindria un dels punts de partida del procés d’industrialització a Catalunya. Els resultats confirmen els papers jugats pel impuls “Boserupià” de la població en un context d’intensificació de l’ús de la terra, i d’un impuls del mercat “Smithià” en un context d’expansió de la demanda per part de les economies atlàntiques. També es posa de manifest la importància de les dotacions agro-ecològiques i les condicions socioinstitucionals relacionades amb la desigualtat d’ingrés. La difusió de la vinya donà com a resultat unes comunitats rurals menys desiguals fins al 1820, tot i que aquesta desigualtat augmentà de nou a partir d'aleshores.

A comparison of the processes of institutionalisation of political economy in Spain and Italy (1860-1900)

[spa] El estudio de los procesos a través de los cuales la economía política se ha transformado en una disciplina académica es un área de creciente interés en la historia del pensamiento económico. Dicho estudio se ha abordado a través del análisis de la importancia de la economía política en un conjunto de instituciones, consideradas clave en la expansión de la economía en las sociedades occidentales en la segunda mitad del siglo XIX y primeras décadas del XX: universidades, sociedades económicas, publicaciones periódicas de contenido económico y los parlamentos nacionales. Este papel presenta una comparación entre los desarrollos del proceso de institutionalización de la economía política en España e Italia, a través del estudio de la presencia de esta disciplina en las instituciones mencionadas para el periodo 1860-1900. El objetivo es medir la posible existencia de una vía común en la institucionalización de la economía política en ambos países, como un primer paso hacia la elaboración de un modelo supranacional de institucionalización de la economía en este periodo.

Regional integration and specialisation patterns in Spain

The aim of this paper is to analyse how economic integration in Europe has affected industrial geographical concentration in Spain and explain what the driving forces behind industry location are. Firstly, we construct regional specialisation and geographical concentration indices for Spanish 50 provinces and 30 industrial sectors in 1979, 1986 and 1992. Secondly, we carry out an econometric analysis of the determinants of geographical concentration of industries. Our main conclusion is that there is no evidence of increasing specialisation in Spain between 1979 and 1992 and that the most important determinant of Spain¿s economic geography is scale economies. Furthermore, traditional trade theory has no effects in explaining the pattern of industrial concentration

Cotton manufacturers as bankers: the textile trade and credit in spain, 1840-1913

[cat] La historiografia ha assenyalat que en el segle XIX el crèdit que els fabricants cotoners catalans oferien als seus clients era de caràcter informal i, per tant, impossible de ser transferit al sistema bancari. Això hauria tingut un efecte negatiu en la rendibilitat de les empreses cotoneres. A partir de l’anàlisi de diversos arxius empresarials, així com de fonts judicials i notarials, aquest treball confirma aquesta descripció dels fets però proposa una interpretació més optimista. Els fabricants feien de banquers dels seus clients perquè eren els millor situats per a exercir aquesta funció. Havien construït una bona estructura d’informació, gestionaven eficientment el risc creditici i obtenien beneficis d’aquesta activitat.

The determinants of social spending in Spain (1880-1960): Is Lindert right?

[spa] El principal objetivo de este artículo se centra en analizar los orígenes del Estado de Bienestar en España a partir del marco teórico elaborado por Peter Lindert. Con este fin, se ofrece un análisis econométrico de los factores que determinaron la evolución del gasto social público en este país entre 1880 y 1960. Utilizando nueva evidencia cuantitativa, se construyó un panel de datos por quinquenios con el porcentaje de gasto social respecto al PIB desagregado en tres partidas: sanidad, seguridad social y beneficencia. El análisis permite insertar el caso español en el debate internacional y los resultados revelan interesantes singularidades de este país.

Why Italy and not Spain?: comparing two industrialization processes from a dissagregate time-series perspective

This study presents new evidence concerning the uneven processes of industrialization innineteenth century Spain and Italy based on a disaggregate analysis of the productivesectors from which the behaviour of the aggregate indices is comprised. The use of multivariate time-series analysis techniques can aid our understanding and characterization of these two processes of industrialization. The identification of those sectors with key rolesin leading industrial growth provides new evidence concerning the factors that governed thebehaviour of the aggregates in the two economies. In addition, the analysis of the existenceof interindustry linkages reveals the scale of the industrialization process, and wheresignificant differences exist, accounts for many of the divergences recorded in the historiography for the period 1850-1913.

Networks of people in specialty production: family firms in the iron and steel Wire industries in Spain (1870-2000)

Capital intensive industries in specialized niches of production have constituted solid ground for family firms in Spain , as evidenced by the experience of the iron and steel wire industries between 1870 and 2000. The embeddedness of these firms in their local and regional environments have allowed the creation of networks that, together with favourable institutional conditions, significantly explain the dominance of family entrepreneurship in iron and steel wire manufacturing in Spain, until the end of the 20 th century. Dominance of family firms at the regional level has not been not an obstacle for innovation in wire manufacturing in Spain, which has taken place even when institutional conditions blocked innovation and traditional networking. Therefore, economic theories about the difficulties dynastic family firms may have to perform appropriately in science-based industries must be questioned

Origin of siderite mineralisation in Petrova and Trgovska Gora Mts., NW Dinarides

The Petrova and Trgovska Gora Mts. (Gora=Mountain) are Variscan basement units incorporated into the northwestern Dinarides during the Alpine orogeny. They host numerous siderite-quartz-polysulphide, siderite-chalcopyrite, siderite-galena and barite veins, as well as stratabound hydrothermal-replacement ankerite bodies within carbonates in non-metamorphosed, flysch-like Permo-Carboniferous sequences. The deposits have been mined for Cu, Pb, Ag and Fe ores since Medieval times. Fluid inclusion studies of quartz from siderite-polysulphide-quartz and barite veins of both regions have shown the presence of primary aqueous NaCl-CaCl(2)+/- MgCl(2)-H(2)O +/- CO(2) inclusions. The quartz-sulphide stage of both regions show variable salinities; 2.7-26.2 wt% NaCl eq. for the Trgovska Gora region and 3.4-23.4 wt% NaCl eq. for the Petrova gora region, and similar homogenisation temperatures (100-230A degrees C). Finally, barite is precipitated from low salinity-low temperature solutions (3.7-15.8 wt % NaCl equ. and 115-145A degrees C). P-t conditions estimated via isochore construction yield formation temperatures between 180-250A degrees C for the quartz-sulphide stage and 160-180A degrees C for the barite stage, using a maximum lithostatic pressure of 1 kbar (cc. 3 km of overburden). The sulphur isotope composition of barite from both deposits indicates the involvement of Permian seawater in ore fluids. This is supported by the elevated bromium content of the fluid inclusion leachates (120-660 ppm in quartz, 420-960 ppm in barite) with respect to the seawater, indicating evaporated seawater as the major portion of the ore-forming fluids. Variable sulphur isotope compositions of galena, pyrite and chalcopyrite, between -3.2 and +2.7aEuro degrees, are interpreted as a product of incomplete thermal reduction of the Permian marine sulphate mixed with organically- and pyrite-bound sulphur from the host sedimentary rocks. Ore-forming fluids are interpreted as deep-circulating fluids derived primarily from evaporated Permian seawater and later modified by interaction with the Variscan basement rocks. (40)Ar/(39)Ar data of the detrital mica from the host rocks yielded the Variscan age overprinted by an Early Permian tectonothermal event dated at 266-274 Ma. These ages are interpreted as those reflecting hydrothermal activity correlated with an incipient intracontinental rifting in the Tethyan domain. Nevertheless, 75 Ma recorded at a fine-grained sericite sample from the alteration zone is interpreted as a result of later resetting of white mica during Campanian opening/closure of the Sava back arc in the neighbouring Sava suture zone (Ustaszewski et al. 2008).

Chagas Disease among the Latin American Adult population attending in a primary care center in Barcelona, Spain

Background/Aims: The epidemiology of Chagas disease, until recently confined to areas of continental Latin America, has undergone considerable changes in recent decades due to migration to other parts of the world, including Spain. We studied the prevalence of Chagas disease in Latin American patients treated at a health center in Barcelona and evaluated its clinical phase. We make some recommendations for screening for the disease. Methodology/Principal Findings: We performed an observational, cross-sectional prevalence study by means of an immunochromatographic test screening of all continental Latin American patients over the age of 14 years visiting the health centre from October 2007 to October 2009. The diagnosis was confirmed by serological methods: conventional in-house ELISA (cELISA), a commercial kit (rELISA) and ELISA using T cruzi lysate (Ortho-Clinical Diagnostics) (oELISA). Of 766 patients studied, 22 were diagnosed with T. cruzi infection, showing a prevalence of 2.87% (95% CI, 1.6-4.12%). Of the infected patients, 45.45% men and 54.55% women, 21 were from Bolivia, showing a prevalence in the Bolivian subgroup (n = 127) of 16.53% (95% CI, 9.6-23.39%). All the infected patients were in a chronic phase of Chagas disease: 81% with the indeterminate form, 9.5% with the cardiac form and 9.5% with the cardiodigestive form. All patients infected with T. cruzi had heard of Chagas disease in their country of origin, 82% knew someone affected, and 77% had a significant history of living in adobe houses in rural areas. Conclusions: We found a high prevalence of T. cruzi infection in immigrants from Bolivia. Detection of T. cruzi¿infected persons by screening programs in non-endemic countries would control non-vectorial transmission and would benefit the persons affected, public health and national health systems.

Factors influencing privatization of urban solid waste collection: some evidence from Spain

In this paper we analyse some of the organisational aspects of the urban solid waste collection and, in particular, the privatization modality of contracting out. We start by discussing some of the theoretical aspects of contracting out. We then specify and estimate an explanatory model on a sample of municipalities that we surveyed. Our purpose is twofold: on the one hand, we identify the economic factors at work when deciding to contract out the service and, on the other hand, we analyse the role of ideological factors in choosing between the public production of the service or contracting it out. The results show a significant effect of the demand for waste collection on contracting out. There also appears to be a neighbouring effect as the municipalities close to other cities that contract out are also more prone to do so. Finally, the decisions to contract seem to have been motivated by pragmatic rather than ideological reasons.

Geographical determinants of the creation of manufacturing firms: The regions of Spain

La complexitat dels mecanismes que determinen l'entrada i la sortida de signatures augmenta quan diferències geogràfiques de l'estructura de producció, la capital humana i l'atur són considerades. Variacions interregionals en la tarifa de les noves de signatures dintre de cada activitat industrial persisteixen durant els períodes llargs de temps, una circumstància que indica que hi ha determinants no-conjunturals en la capacitat de regions per a crear nous projectes industrials. Aquest estudi està preocupat amb l'establiment d'influència variables geogràfiques sobre la fundació de nous establiments de la fabricació. Les indústries (NEIX la R 25) en les regions espanyoles (el BOIG 2) han estat preses com les unitats d'anàlisis per al període 1980-1992