Application of protein-phenolic based coating on tomatoes (Lycopersicum esculentum)

The aim of this study was to investigate the use of protein-phenolic based coating made from fermented rice bran on cherry tomatoes (Lycopersicum esculentum). Tests were performed with glycerol 3% (v/v), glycerol with protein-phenolic rice bran extract (5%), glycerol with protein-phenolic extract after 96 hours of fermentation (5%), and a control (without coating). The coated cherry tomatoes were kept at room temperature for 28 days. Mass loss, pH and acidity, total soluble solids, and carotenoids were determined every 96 hours. The coating made from the biomass extract reduced the carotenoid and acidity levels in the fruits studied by 17 and 21.1%, respectively, compared to the control. The coating proved an efficient barrier to water vapor with mass loss of 57% less than the control suggesting that it can be used as an alternative for vegetable tissue conservation.

Economic capital allocation

For my Licentiate thesis, I conducted research on risk measures. Continuing with this research, I now focus on capital allocation. In the proportional capital allocation principle, the choice of risk measure plays a very important part. In the chapters Introduction and Basic concepts, we introduce three definitions of economic capital, discuss the purpose of capital allocation, give different viewpoints of capital allocation and present an overview of relevant literature. Risk measures are defined and the concept of coherent risk measure is introduced. Examples of important risk measures are given, e. g., Value at Risk (VaR), Tail Value at Risk (TVaR). We also discuss the implications of dependence and review some important distributions. In the following chapter on Capital allocation we introduce different principles for allocating capital. We prefer to work with the proportional allocation method. In the following chapter, Capital allocation based on tails, we focus on insurance business lines with heavy-tailed loss distribution. To emphasize capital allocation based on tails, we define the following risk measures: Conditional Expectation, Upper Tail Covariance and Tail Covariance Premium Adjusted (TCPA). In the final chapter, called Illustrative case study, we simulate two sets of data with five insurance business lines using Normal copulas and Cauchy copulas. The proportional capital allocation is calculated using TCPA as risk measure. It is compared with the result when VaR is used as risk measure and with covariance capital allocation. In this thesis, it is emphasized that no single allocation principle is perfect for all purposes. When focusing on the tail of losses, the allocation based on TCPA is a good one, since TCPA in a sense includes features of TVaR and Tail covariance.

Promoting Healthy Lifestyles with Personalized, APOE Genotype Based Health Information: The Effects on Psychological-, Health Behavioral and Clinical Factors

There is an increasing demand for individualized, genotype-based health advice. The general population-based dietary recommendations do not always motivate people to change their life-style, and partly following this, cardiovascular diseases (CVD) are a major cause of death in worldwide. Using genotype-based nutrition and health information (e.g. nutrigenetics) in health education is a relatively new approach, although genetic variation is known to cause individual differences in response to dietary factors. Response to changes in dietary fat quality varies, for example, among different APOE genotypes. Research in this field is challenging, because several non-modifiable (genetic, age, sex) and modifiable (e.g. lifestyle, dietary, physical activity) factors together and with interaction affect the risk of life-style related diseases (e.g. CVD). The other challenge is the psychological factors (e.g. anxiety, threat, stress, motivation, attitude), which also have an effect on health behavior. The genotype-based information is always a very sensitive topic, because it can also cause some negative consequences and feelings (e.g. depression, increased anxiety). The aim of this series of studies was firstly to study how individual, genotype-based health information affects an individual’s health form three aspects, and secondly whether this could be one method in the future to prevent lifestyle-related diseases, such as CVD. The first study concentrated on the psychological effects; the focus of the second study was on health behavior effects, and the third study concentrated on clinical effects. In the fourth study of this series, the focus was on all these three aspects and their associations with each other. The genetic risk and health information was the APOE gene and its effects on CVD. To study the effect of APOE genotype-based health information in prevention of CVD, a total of 151 volunteers attended the baseline assessments (T0), of which 122 healthy adults (aged 20 – 67 y) passed the inclusion criteria and started the one-year intervention. The participants (n = 122) were randomized into a control group (n = 61) and an intervention group (n = 61). There were 21 participants in the intervention Ɛ4+ group (including APOE genotypes 3/4 and 4/4) and 40 participants in the intervention Ɛ4- group (including APOE genotypes 2/3 and 3/3). The control group included 61 participants (including APOE genotypes 3/4, 4/4, 2/3, 3/3 and 2/2). The baseline (T0) and follow-up assessments (T1, T2, T3) included detailed measurements of psychological (threat and anxiety experience, stage of change), and behavioral (dietary fat quality, consumption of vegetables, - high fat/sugar foods and –alcohol, physical activity and health and taste attitudes) and clinical factors (total-, LDL- HDL cholesterol, triglycerides, blood pressure, blood glucose (0h and 2h), body mass index, waist circumference and body fat percentage). During the intervention six different communication sessions (lectures on healthy lifestyle and nutrigenomics, health messages by mail, and personal discussion with the doctor) were arranged. The intervention groups (Ɛ4+ and Ɛ4-) received their APOE genotype information and health message at the beginning of the intervention. The control group received their APOE genotype information after the intervention. For the analyses in this dissertation, the results for 106/107 participants were analyzed. In the intervention, there were 16 participants in the high-risk (Ɛ4+) group and 35 in the low-risk (Ɛ4-) group. The control group had 55 participants in studies III-IV and 56 participants in studies I-II. The intervention had both short-term (≤ 6 months) and long-term (12 months) effects on health behavior and clinical factors. The short-term effects were found in dietary fat quality and waist circumference. Dietary fat quality improved more in the Ɛ4+ group than the Ɛ4- and the control groups as the personal, genotype-based health information and waist circumference lowered more in the Ɛ4+ group compared with the control group. Both these changes differed significantly between the Ɛ4+ and control groups (p<0.05). A long-term effect was found in triglyceride values (p<0.05), which lowered more in Ɛ4+ compared with the control group during the intervention. Short-term effects were also found in the threat experience, which increased mostly in the Ɛ4+ group after the genetic feedback (p<0.05), but it decreased after 12 months, although remaining at a higher level compared to the baseline (T0). In addition, Study IV found that changes in the psychological factors (anxiety and threat experience, motivation), health and taste attitudes, and health behaviors (dietary, alcohol consumption, and physical activity) did not directly explain the changes in triglyceride values and waist circumference. However, change caused by a threat experience may have affected the change in triglycerides through total- and HDL cholesterol. In conclusion, this dissertation study has given some indications that individual, genotypebased health information could be one potential option in the future to prevent lifestyle-related diseases in public health care. The results of this study imply that personal genetic information, based on APOE, may have positive effects on dietary fat quality and some cardiovascular risk markers (e.g., improvement in triglyceride values and waist circumference). This study also suggests that psychological factors (e.g. anxiety and threat experience) may not be an obstacle for healthy people to use genotype-based health information to promote healthy lifestyles. However, even in the case of very personal health information, in order to achieve a permanent health behavior change, it is important to include attitudes and other psychological factors (e.g. motivation), as well as intensive repetition and a longer intervention duration. This research will serve as a basis for future studies and its information can be used to develop targeted interventions, including health information based on genotyping that would aim at preventing lifestyle diseases. People’s interest in personalized health advices has increased, while also the costs of genetic screening have decreased. Therefore, generally speaking, it can be assumed that genetic screening as a part of the prevention of lifestyle-related diseases may become more common in the future. In consequence, more research is required about how to make genetic screening a practical tool in public health care, and how to efficiently achieve long-term changes.

Variable-speed-drive-based detection methods for problems in fluid handling systems

Fluid handling systems account for a significant share of the global consumption of electrical energy. They also suffer from problems, which reduce their energy efficiency and increase life-cycle costs. Detecting or predicting these problems in time can make fluid handling systems more environmentally and economically sustainable to operate. In this Master’s Thesis, significant problems in fluid systems were studied and possibilities to develop variable-speed-drive-based detection methods for them was discussed. A literature review was conducted to find significant problems occurring in fluid handling systems containing pumps, fans and compressors. To find case examples for evaluating the feasibility of variable-speed-drive-based methods, queries were sent to industrial companies. As a result of this, the possibility to detect heat exchanger fouling with a variable-speed drive was analysed with data from three industrial cases. It was found that a mass flow rate estimate, which can be generated with a variable speed drive, can be used together with temperature measurements to monitor a heat exchanger’s thermal performance. Secondly, it was found that the fouling-related increase in the pressure drop of a heat exchanger can be monitored with a variable speed drive. Lastly, for systems where the flow device is speed controlled with by a pressure measurement, it was concluded that increasing rotational speed can be interpreted as progressing fouling in the heat exchanger.

A mass spectrometric study of some pesticides /|nK. S. Subramanian. -- 260 St. Catharines, Ont. : [s. n.],

The fragmentation processes in the mass spectra of a series of organophosphorus, organochlorine, thio and dithiocarbamate as well as a number of miscellaneous pesticides have been studied i n detail by using the Bendix timeof- flight, MS-12 single-focussing and MS-30 double-focussing mass spectrometers. Interpretation of all the spectra have been presented; their mode s of dissociation elucidated, aided by metastable transitions wherever possible and the structures of the various f ragmentation species postulated wherever f easible. The fragmentation mechanisms are based on the concepts of inductive, resonance and steric ef~ects. Multiple bond cleavages accompanied by simultaneous bond formation and rearrangement reactions involving cycli c t r ansition states have clarified t he formation of various ions . Due emphasis has been placed on the effect of the functional groups or substituents in altering the mass spectral behaviour of the pesticides as they form the basis for the identifi cation of the otherwise identical pesticides. The organophosphorus pesticides which have been studied include i) the phosphates (eg: DDVP and Phosdrin ); ii) phosphorothionates (eg: Parathion, 0-2, 4 dichloro phenyl 0, O-diethyl thionophosphate); iii) phosphorothioites (eg: Tributyl phosphorotrithioite); i V) phosphorothioates (eg: Ethion) and v) phosphorodithioates (eg: Carbophenolthion). Cleavages and rearrangements of the ester moiety dominate the spectrum of phosdrin while that of DDVP is + dominated by t he fragmentation modes of the (OH30)2P=0 + moiety. Fragmentation §f the (CH30)2P=S characterises the spectrum of (OH30)2"P -Cl while cleavages of the + (C2H50 )2P=S species mark the spectra of parathion and 0-2, 4- di chlorophenyl O, O-diethyl thiophosphate. The 0(, cl eavages of the thioether f unction rather than + cleavages of the (C2H50)2P=S signify the spectrum of carbophenolthion. Tributyl phosphorotrithioite behaves more like an aliphatic hydrocarbon than like the corresponding phosphites. The isopropyl and butyl esters of 2, 4 dichlorophenoxy acetic acid show cleavage and rearrangement ions typical of an ester. In spite of its structural similari ty to pp' - DDT and pp' - DDD, Kalthane has a completely different mass spectral behaviour due to the influence of its hydroxyl function. The thiocarbamate pesticides studied include Eptam and Perbulate. Both are structurally similar but having different alkyl substituents on nitrogen and sulphur. This structurQlsimilarity leads to similar types of (N-C), (O-S) and (S-alkyl cleavages). However, perbulate differs from Eptam in showing a rearrangement ion at mle 161 and in forming an isocyanate ion as the base peak. In Eptam the base peak i s the alkyl ion. The dithiocarbamate, Vegadex, resembles the thiocarbamates in undergoing simple cleavages but it differs from them in having a weak parent ion; in the formation of its base peak and in undergoing a series of rearrangement reactions. The miscellaneous pesticides studied include 1-Naphthalene acetic aCid- methyl ester, Fiperonyl butoxide and Allethrin. The ester i s stable to electron impact and shows only fewer ions. Piper onyl butoxide, a polyether, shows characteristics of an et her, alcohol and aldehyde . Allethrin is regarded as an ester of the type R-C-O-R1 with n R being a substituted cyclopr opane moiety and o Rt, a substituted cyclopentenone mOiety. Accordingly it shows cleavage ions typical of an aliphatic ester and undergoes bond ruptures of the cyclic moieties to give unusual ions. Its base peak is an odd electron ion, quite contrary to expectations.

Fast atom bombardment mass spectrometry of the coordination complexes of the ligand 5, 5, 7, 12, 12, 14- hexamenthyl-1, 4, 8, 11-tetraazacycloteradecane

A number of metal complexes containing the ligand 5,5,7,12,12,14-hexamethyl-l,4,8,11-tetra-azatetradecane were synthesized and analyzed using electron impact (EI) and fast atom bombardment (FAB). The FAB mass spectra were obtained in positive and negative ion mode. FAB in the positive ion mode proved to be the most successful technique for the identification of these compounds. In the majority of cases the spectra obtained using positive ion FAB were structurally informative, although not all showed molecular (M+) or quasimolecular ([M+H]+) ions. The fragmentations observed were characteristic of the ligands, and were interpreted based on the chemistry of these compounds.

Investigations into the extraction and the determination of polycyclic aromatic hydrocarbons (PAHs) from water by solid-phase extraction and capillary gas chromatography/ mass spectrometry

Factors affecting the detennination of PAHs by capillary GC/MS were studied. The effect of the initial column temperature and the injection solvent on the peak areas and heights of sixteen PAHs, considered as priority pollutants, USillg crosslinked methyl silicone (DB!) and 5% diphenyl, 94% dimethyl, 1% vinyl polysiloxane (DBS) columns was examined. The possibility of using high boiling point alcohols especially butanol, pentanol, cyclopentanol, and hexanol as injection solvents was investigated. Studies were carried out to optimize the initial column temperature for each of the alcohols. It was found that the optimum initial column temperature is dependent on the solvent employed. The peak areas and heights of the PAHs are enhanced when the initial column temperature is 10-20 c above the boiling point of the solvent using DB5 column, and the same or 10 C above the boiling point of the solvent using DB1 column. Comparing the peak signals of the PAHs using the alcohols, p-xylene, n-octane, and nonane as injection solvents, hexanol gave the greatest peak areas and heights of the PAHs particularly the late-eluted peaks. The detection limits were at low pg levels, ranging from 6.0 pg for fluorene t9 83.6 pg for benzo(a)pyrene. The effect of the initial column temperature on the peak shape and the separation efficiency of the PARs was also studied using DB1 and DB5 columns. Fronting or splitting of the peaks was obseIVed at very low initial column temperature. When high initial column temperature was used, tailing of the peaks appeared. Great difference between DB! and.DB5 columns in the range of the initial column temperature in which symmetrical.peaks of PAHs can be obtained is observed. Wider ranges were shown using DB5 column. Resolution of the closely-eluted PAHs was also affected by the initial column temperature depending on the stationary phase employed. In the case of DB5, only the earlyeluted PAHs were affected; whereas, with DB1, all PAHs were affected. An analytical procedure utilizing solid phase extraction with bonded phase silica (C8) cartridges combined with GC/MS was developed to analyze PAHs in water as an alternative method to those based on the extraction with organic solvent. This simple procedure involved passing a 50 ml of spiked water sample through C8 bonded phase silica cartridges at 10 ml/min, dried by passing a gentle flow of nitrogen at 20 ml/min for 30 sec, and eluting the trapped PAHs with 500 Jll of p-xylene at 0.3 ml/min. The recoveries of PAHs were greater than 80%, with less than 10% relative standard deviations of nine determinations. No major contaminants were present that could interfere with the recognition of PAHs. It was also found that these bonded phase silica cartridges can be re-used for the extraction of PAHs from water.

Using genetic algorithms for the single allocation hub location problem

Hub location problem is an NP-hard problem that frequently arises in the design of transportation and distribution systems, postal delivery networks, and airline passenger flow. This work focuses on the Single Allocation Hub Location Problem (SAHLP). Genetic Algorithms (GAs) for the capacitated and uncapacitated variants of the SAHLP based on new chromosome representations and crossover operators are explored. The GAs is tested on two well-known sets of real-world problems with up to 200 nodes. The obtained results are very promising. For most of the test problems the GA obtains improved or best-known solutions and the computational time remains low. The proposed GAs can easily be extended to other variants of location problems arising in network design planning in transportation systems.

Application of thermal ion-molecule reactions in tackling spectroscopic inferences in inductively coupled plasma mass spectrometry

Part I: Ultra-trace determination of vanadium in lake sediments: a performance comparison using O2, N20, and NH3 as reaction gases in ICP-DRC-MS Thermal ion-molecule reactions, targeting removal of specific spectroscopic interference problems, have become a powerful tool for method development in quadrupole based inductively coupled plasma mass spectrometry (ICP-MS) applications. A study was conducted to develop an accurate method for the determination of vanadium in lake sediment samples by ICP-MS, coupled with a dynamic reaction cell (DRC), using two differenvchemical resolution strategies: a) direct removal of interfering C10+ and b) vanadium oxidation to VO+. The performance of three reaction gases that are suitable for handling vanadium interference in the dynamic reaction cell was systematically studied and evaluated: ammonia for C10+ removal and oxygen and nitrous oxide for oxidation. Although it was able to produce comparable results for vanadium to those using oxygen and nitrous oxide, NH3 did not completely eliminate a matrix effect, caused by the presence of chloride, and required large scale dilutions (and a concomitant increase in variance) when the sample and/or the digestion medium contained large amounts of chloride. Among the three candidate reaction gases at their optimized Eonditions, creation of VO+ with oxygen gas delivered the best analyte sensitivity and the lowest detection limit (2.7 ng L-1). Vanadium results obtained from fourteen lake sediment samples and a certified reference material (CRM031-040-1), using two different analytelinterference separation strategies, suggested that the vanadium mono-oxidation offers advantageous performance over the conventional method using NH3 for ultra-trace vanadium determination by ICP-DRC-MS and can be readily employed in relevant environmental chemistry applications that deal with ultra-trace contaminants.Part II: Validation of a modified oxidation approach for the quantification of total arsenic and selenium in complex environmental matrices Spectroscopic interference problems of arsenic and selenium in ICP-MS practices were investigated in detail. Preliminary literature review suggested that oxygen could serve as an effective candidate reaction gas for analysis of the two elements in dynamic reaction cell coupled ICP-MS. An accurate method was developed for the determination of As and Se in complex environmental samples, based on a series of modifications on an oxidation approach for As and Se previously reported. Rhodium was used as internal standard in this study to help minimize non-spectral interferences such as instrumental drift. Using an oxygen gas flow slightly higher than 0.5 mL min-I, arsenic is converted to 75 AS160+ ion in an efficient manner whereas a potentially interfering ion, 91Zr+, is completely removed. Instead of using the most abundant Se isotope, 80Se, selenium was determined by a second most abundant isotope, 78Se, in the form of 78Se160. Upon careful selection of oxygen gas flow rate and optimization ofRPq value, previous isobaric threats caused by Zr and Mo were reduced to background levels whereas another potential atomic isobar, 96Ru+, became completely harmless to the new selenium analyte. The new method underwent a strict validation procedure where the recovery of a suitable certified reference material was examined and the obtained sample data were compared with those produced by a credible external laboratory who analyzed the same set of samples using a standardized HG-ICP-AES method. The validation results were satisfactory. The resultant limits of detection for arsenic and selenium were 5 ng L-1 and 60 ng L-1, respectively.

Planification de la récolte et allocation des produits aux usines

L’industrie forestière est un secteur qui, même s’il est en déclin, se trouve au cœur du débat sur la mondialisation et le développement durable. Pour de nombreux pays tels que le Canada, la Suède et le Chili, les objectifs sont de maintenir un secteur florissant sans nuire à l’environnement et en réalisant le caractère fini des ressources. Il devient important d’être compétitif et d’exploiter de manière efficace les territoires forestiers, de la récolte jusqu’à la fabrication des produits aux usines, en passant par le transport, dont les coûts augmentent rapidement. L’objectif de ce mémoire est de développer un modèle de planification tactique/opérationnelle qui permet d’ordonnancer les activités pour une année de récolte de façon à satisfaire les demandes des usines, sans perdre de vue le transport des quantités récoltées et la gestion des inventaires en usine. L’année se divise en 26 périodes de deux semaines. Nous cherchons à obtenir les horaires et l’affectation des équipes de récolte aux blocs de coupe pour une année. Le modèle mathématique développé est un problème linéaire mixte en nombres entiers dont la structure est basée sur chaque étape de la chaine d’approvisionnement forestière. Nous choisissons de le résoudre par une méthode exacte, le branch-and-bound. Nous avons pu évaluer combien la résolution directe de notre problème de planification était difficile pour les instances avec un grand nombre de périodes. Cependant l’approche des horizons roulants s’est avérée fructueuse. Grâce à elle en une journée, il est possible de planifier les activités de récolte des blocs pour l’année entière (26 périodes).

Developmental trajectories of body mass index in early childhood : an 8-year longitudinal study

Trajectoires développementales de l’IMC durant l’enfance: Une étude longitudinale sur 8 ans. Introduction : L’obésité infantile, origine de nombreux problèmes de santé, représente un grand défi en santé publique. Récemment, l’importance d’étudier l’évolution du surpoids durant l’enfance ainsi que les facteurs de risques précoces pour l’obésité a été reconnue. Les trajectoires développementales d’indice de masse corporelle (IMC) chez les jeunes représentent une approche innovatrice qui nous permet de mieux comprendre cette problématique importante. Objectifs: 1) Identifier des trajectoires développementales distinctes de groupes d’enfants selon leur IMC durant l’enfance, et 2) Explorer les facteurs de risques précoces qui prédisent l’appartenance de l’enfant à la trajectoire d’IMC le plus élevé Hypothèses: 1) On s’attend à retrouver un groupe d’enfants qui suit une trajectoire d’IMC élevée durant l’enfance. 2) On s’attend à ce que certaines caractéristiques de la mère (ex : tabac pendant la grossesse et IMC élevé), soient associées à l’appartenance de l’enfant au groupe ayant la trajectoire «IMC élevé ». Méthodes: Estimation des trajectoires développementales d’IMC d’enfants, dans un échantillon populationnel (n=1957) au Québec (ELDEQ). Les IMC ont été calculés à partir de données fournies par les mères des enfants et recueillis chaque année sur une durée de 8 ans. Des données propres à l’enfant sa mère, ainsi que socioéconomiques, ont étés recueillies. Une régression logistique multinomiale a été utilisée pour distinguer les enfants avec un IMC élevé des autres enfants, selon les facteurs de risques précoces. Les programmes PROC TRAJ (extension de SAS), SPSS (version 16), et SAS (version 9.1.3) ont été utilisés pour ces analyses. Résultats: Trois trajectoires d’IMC ont étés identifiées : IMC « bas-stable » (54,5%), IMC « modéré » (41,0%) et IMC « élevé et en hausse » (4,5%). Le groupe « élevé et en hausse » incluait des enfants pour qui l’IMC à 8 ans dépassait la valeur limite pour l’obésité. Les analyses de régression logistique ont révélé que deux facteurs de risques maternels étaient significativement associés avec la trajectoire “en hausse” par rapport aux deux autres groupes : le tabac durant la grossesse et le surpoids maternel. Conclusions: Des risques d’obésité infantile peuvent êtres identifiés dès la grossesse. Des études d’intervention sont requises pour identifier la possibilité de réduire le risque d’obésité chez l’enfant en ciblant le tabac et le surpoids maternelle durant la grossesse. Mots clés: Indice de masse corporelle (IMC), obésité infantile, trajectoires développementales de groupe, facteurs de risque précoce, étude populationnelle, tabac pendant la grossesse, obésité maternelle.

Analytical strategies for the comprehensive profiling of histone post translational modifications by mass spectrometry and implications for functional analyses

Le long bio-polymère d'ADN est condensé à l’intérieur du noyau des cellules eukaryotes à l'aide de petites protéines appelées histones. En plus de leurs fonctions condensatrices,ces histones sont également la cible de nombreuses modifications post-traductionnelles(MPT), particulièrement au niveau de leur section N-terminale. Ces modifications réversibles font partie d’un code d’histones épi-génétique transmissible qui orchestre et module dynamiquement certains événements impliquant la chromatine, tels l’activation et la désactivation de gènes ainsi que la duplication et la réparation d’ADN. Ces modifications sont impliquées subséquemment dans la signalisation et la progression de cancers, tels que la leucémie. En conséquence, l'élucidation des modifications d’histones est importante pour comprendre leurs fonctions biologiques. Une méthodologie analytique a été mise au point en laboratoire pour isoler, détecter, et quantifier les MPT d’histones en utilisant une approche rapide à deux volets à l’aide d’outils bioinformatiques spécialisés. La méthodologie développée en laboratoire a été validée en utilisant des histones de souche sauvage ainsi que deux types d’histones mutants déficients en enzymes acétyltransferase. Des trois sources d’histones utilisées, la seule MPT qui a démontré un changement significatif est l’acétylation de l’histone H3 à lysine 56 (H3K56ac). L’expression et la stoechiométrie de cette MPT, issue de cellules de souche sauvage et de cellules mutantes, ont été déterminées avec précision et comparées. Les fonctions de balayage polyvalentes d'un instrument à trappe ionique quadrupôle linéaire hybride ont été utilisées pour améliorer la détection de protéines intactes. Le mode de balayage « enhanced multiply charged » (EMC) a été modifié pour contenir et détecter les ions de protéines intactes situées dans la trappe ionique linéaire. Ce mode de balayage nommé « targeted EMC » (tEMC) a permis de quadrupler le niveau de sensibilité (signal/interférence), et quintupler la résolution du mode de balayage conventionnel. De plus, la capacité de séparation des charges du tEMC a réduit de façon significative les effets de « space charge » dans la trappe ionique linéaire. La résolution supérieure du mode tEMC a permis de différencier plusieurs isoformes modifiées, particulièrement pour l’histone H3. L’analyse des peptides d’histones trypsiques à l’aide du mode de balayage « MRM » a permis le séquençage et la quantification de MPT avec un haut degré de précision. La seule MPT qui était sous-exprimée entre l’histone de souche sauvage et le mutant DOT1L fut la méthylation de l’histone H3 lysine 79(H3K79me1). Les effets de deux inhibiteurs d’enzymes HDAC (HDACi) sur l’expression de MPT d’histone ont été évalués en utilisant la méthodologie analytique mentionnée. Les histones extraites de cellules normales et cancéreuses ont été exposées à du Vorinostat(SAHA) ou du Entinostat (MS-275) pour une période de 24 à 72 heures. Deux histones furent principalement affectées, soit H3 et H4. Étonnamment, les mêmes effets n'ont pas été détectés lorsque les cellules normales ont été traitées avec le HDACi pour une période de 48 à 72 heures. Une méthode absolue de quantification avec une courbe d’étalonnage a été développée pour le peptide H3K56ac. Contrairement à certaines publications, nos résultats démontrent que cette MPT est présente dans les cellules mammifères avec une stoechiométrie très basse (< 0,1%) et n'est pas surexprimée de façon significative après le traitement au HDACi.

Detection and quantification of staphylococcus aureus enterotoxin B in food product using isotopic dilution techniques and mass spectrometry

L’entérotoxine B staphylococcique (SEB) est une toxine entérique hautement résistante à la chaleur et est responsable de plus de 50 % des cas d’intoxication d’origine alimentaire par une entérotoxine. L’objectif principal de ce projet de maîtrise est de développer et valider une méthode basée sur des nouvelles stratégies analytiques permettant la détection et la quantification de SEB dans les matrices alimentaires. Une carte de peptides tryptiques a été produite et 3 peptides tryptiques spécifiques ont été sélectionnés pour servir de peptides témoins à partir des 9 fragments protéolytiques identifiés (couverture de 35 % de la séquence). L’anhydride acétique et la forme deutérée furent utilisés afin de synthétiser des peptides standards marqués avec un isotope léger et lourd. La combinaison de mélanges des deux isotopes à des concentrations molaires différentes fut utilisée afin d’établir la linéarité et les résultats ont démontré que les mesures faites par dilution isotopique combinée au CL-SM/SM respectaient les critères généralement reconnus d’épreuves biologiques avec des valeurs de pente près de 1, des valeurs de R2 supérieure à 0,98 et des coefficients de variation (CV%) inférieurs à 8 %. La précision et l’exactitude de la méthode ont été évaluées à l’aide d’échantillons d’homogénat de viande de poulet dans lesquels SEB a été introduite. SEB a été enrichie à 0,2, 1 et 2 pmol/g. Les résultats analytiques révèlent que la méthode procure une plage d’exactitude de 84,9 à 91,1 %. Dans l’ensemble, les résultats présentés dans ce mémoire démontrent que les méthodes protéomiques peuvent être utilisées efficacement pour détecter et quantifier SEB dans les matrices alimentaires. Mots clés : spectrométrie de masse; marquage isotopique; protéomique quantitative; entérotoxines

House allocation via deferred-acceptance

We study the simple model of assigning indivisible and heterogenous objects (e.g., houses, jobs, offi ces, etc.) to agents. Each agent receives at most one object and monetary compensations are not possible. For this model, known as the house allocation model, we characterize the class of rules satisfying unavailable object invariance, individual rationality, weak non-wastefulness, resource-monotonicity, truncation invariance, and strategy-proofness: any rule with these properties must allocate objects based on (implicitly induced) objects' priorities over agents and the agent-proposing deferred-acceptance-algorithm.

On the design of customized risk measures in insurance, the problem of capital allocation and the theory of fluctuations for Lévy processes

Dans cette thèse, nous étudions quelques problèmes fondamentaux en mathématiques financières et actuarielles, ainsi que leurs applications. Cette thèse est constituée de trois contributions portant principalement sur la théorie de la mesure de risques, le problème de l’allocation du capital et la théorie des fluctuations. Dans le chapitre 2, nous construisons de nouvelles mesures de risque cohérentes et étudions l’allocation de capital dans le cadre de la théorie des risques collectifs. Pour ce faire, nous introduisons la famille des "mesures de risque entropique cumulatifs" (Cumulative Entropic Risk Measures). Le chapitre 3 étudie le problème du portefeuille optimal pour le Entropic Value at Risk dans le cas où les rendements sont modélisés par un processus de diffusion à sauts (Jump-Diffusion). Dans le chapitre 4, nous généralisons la notion de "statistiques naturelles de risque" (natural risk statistics) au cadre multivarié. Cette extension non-triviale produit des mesures de risque multivariées construites à partir des données financiéres et de données d’assurance. Le chapitre 5 introduit les concepts de "drawdown" et de la "vitesse d’épuisement" (speed of depletion) dans la théorie de la ruine. Nous étudions ces concepts pour des modeles de risque décrits par une famille de processus de Lévy spectrallement négatifs.