Experimental results on multicarrier SIMO HF communications

Achieving reliable communication over HF channels is known to be challenging due to the particularly hostile propagation medium. To address this problem, diversity techniques were shown to be promising. In this paper, we demonstrate through experimental results the benefits of different diversity strategies when applied to multi-input-multi-output (MIMO) multicarrier systems. The performance gains of polarisation, space and frequency diversities are quantified using different measurement campaigns.

Optimization of Arq Parameters of Stanag 5066 for the HFDVL Modem

The reliability of bidirectional communication link can be guaranteed with Automatic Repeat Request Procedures (ARQ). The standard STANAG 5066 describes the ARQ procedure for HF communications that can either be applied to existing HF physical layers modems or adapted to future physical layer designs. In this contribution the physical layer parameters of an HF modem (HFDVL), developed by the authors over the last decade, are chosen to optimize the performance of the ARQ procedure described in STANAG 5066. Besides the interleaving length, constellation size and coding type, the OFDM-based HFDVL modem permits the selection of the number of receiver antennas. It will be shown that this parameter gives additional degrees of freedom and permits reliable communication over low SNR HF communication links.

A hardware in the loop design methodology for FPGA system and its application to complex functions

In this work, a unified algorithm-architecture-circuit co-design environment for complex FPGA system development is presented. The main objective is to find an efficient methodology for designing a configurable optimized FPGA system by using as few efforts as possible in verification stage, so as to speed up the development period. A proposed high performance FFT/iFFT processor for Multiband Orthogonal Frequency Division Multiplexing Ultra Wideband (MB-OFDM UWB) system design process is given as an example to demonstrate the proposed methodology. This efficient design methodology is tested and considered to be suitable for almost all types of complex FPGA system designs and verifications.

Implementation of wireless communication based on Software Defined Radio

In current communication systems, there are many new challenges like various competitive standards, the scarcity of frequency resource, etc., especially the development of personal wireless communication systems result the new system update faster than ever before, the conventional hardware-based wireless communication system is difficult to adapt to this situation. The emergence of SDR enabled the third revolution of wireless communication which from hardware to software and build a flexible, reliable, upgradable, reusable, reconfigurable and low cost platform. The Universal Software Radio Peripheral (USRP) products are commonly used with the GNU Radio software suite to create complex SDR systems. GNU Radio is a toolkit where digital signal processing blocks are written in C++, and connected to each other with Python. This makes it easy to develop more sophisticated signal processing systems, because many blocks already written by others and you can quickly put them together to create a complete system. Although the main function of GNU Radio is not be a simulator, but if there is no RF hardware components,it supports to researching the signal processing algorithm based on pre-stored and generated data by signal generator. This thesis introduced SDR platform from hardware (USRP) and software(GNU Radio), as well as some basic modulation techniques in wireless communication system. Based on the examples provided by GNU Radio, carried out some related experiments, for example GSM scanning and FM radio station receiving on USRP. And make a certain degree of improvement based on the experience of some investigators to observe OFDM spectrum and simulate real-time video transmission. GNU Radio combine with USRP hardware proved to be a valuable lab platform for implementing complex radio system prototypes in a short time. RESUMEN. Software Defined Radio (SDR) es una tecnología emergente que está creando un impacto revolucionario en la tecnología de radio convencional. Un buen ejemplo de radio software son los sistemas de código abierto llamados GNU Radio que emplean un kit de herramientas de desarrollo de software libre. En este trabajo se ha empleado un kit de desarrollo comercial (Ettus Research) que consiste en un módulo de procesado de señal y un hardaware sencillo. El módulo emplea un software de desarrollo basado en Linux sobre el que se pueden implementar aplicaciones de radio software muy variadas. El hardware de desarrollo consta de un microprocesador de propósito general, un dispositivo programable (FPGA) y un interfaz de radiofrecuencia que cubre de 50 a 2200MHz. Este hardware se conecta al PC por medio de un interfaz USB de 8Mb/s de velocidad. Sobre la plataforma de Ettus se pueden ejecutar aplicaciones GNU radio que utilizan principalmente lenguaje de programación Python para implementarse. Sin embargo, su módulo de procesado de señal está construido en C + + y emplea un microprocesador con aritmética de coma flotante. Por lo tanto, los desarrolladores pueden rápida y fácilmente construir aplicaciones en tiempo real sistemas de comunicación inalámbrica de alta capacidad. Aunque su función principal no es ser un simulador, si no puesto que hay componentes de hardware RF, Radio GNU sirve de apoyo a la investigación del algoritmo de procesado de señales basado en pre-almacenados y generados por los datos del generador de señal. En este trabajo fin de máster se ha evaluado la plataforma de hardware de DEG (USRP) y el software (GNU Radio). Para ello se han empleado algunas técnicas de modulación básicas en el sistema de comunicación inalámbrica. A partir de los ejemplos proporcionados por GNU Radio, hemos realizado algunos experimentos relacionados, por ejemplo, escaneado del espectro, demodulación de señales de FM empleando siempre el hardware de USRP. Una vez evaluadas aplicaciones sencillas se ha pasado a realizar un cierto grado de mejora y optimización de aplicaciones complejas descritas en la literatura. Se han empleado aplicaciones como la que consiste en la generación de un espectro de OFDM y la simulación y transmisión de señales de vídeo en tiempo real. Con estos resultados se está ahora en disposición de abordar la elaboración de aplicaciones complejas.

Integración de un amplificador de RF de alto rendimiento con un amplificador de envolvente con red de cancelación de rizado mediante la técnica de EER

En este artículo se presenta la integración de un amplificador de envolvente de una etapa con un amplificador de clase E mediante la técnica de Kahn o Eliminación y restauración de envolvente (EER). Esta técnica se basa en la combinación de un amplificador de potencia conmutado de alto rendimiento alimentado por una fuente de alimentación modulada. El amplificador de envolvente se ha implementado con un convertidor reductor síncrono con red de cancelación de rizado, lo cual permite reducir la relación entre la frecuencia de conmutación y el ancho de banda de gran señal del amplificador de envolvente, que es uno de los factores de diseño más limitantes en esta aplicación. Para la mejora de la linealidad se ha usado la técnica de predistorsión realizándose una validación experimental. El amplificador de envolvente conmuta a 4MHz y el amplificador de clase E a 100MHz. El rendimiento total obtenido para una modulación de amplitud en cuadratura (QAM) es del 68%, con un relación de potencia del canal adyacente (ACPR) de 40dB. Para una modulación por multiplexación por división de frecuencias ortogonales (OFDM), se ha obtenido un rendimiento total del 57% y un ACPR de 32dB.1

Design of a Two-Phase buck converter with fourth-order output filter for envelope amplifiers of limited bandwidth

The use of techniques such as envelope tracking (ET) and envelope elimination and restoration (EER) can improve the efficiency of radio frequency power amplifiers (RFPA). In both cases, high-bandwidth DC/DC converters called envelope amplifiers (EA) are used to modulate the supply voltage of the RFPA. This paper addresses the analysis and design of a modified two-phase Buck converter optimized to operate as EA. The effects of multiphase operation on the tracking capabilities are analyzed. The use of a fourth-order output filter is proposed to increase the attenuation of the harmonics generated by the PWM operation, thus allowing a reduction of the ratio between the switching frequency and the converter bandwidth. The design of the output filter is addressed considering envelope tracking accuracy and distortion caused by the side bands arising from the nonlinear modulation process. Finally, the proposed analysis and design methods are supported by simulation results, as well as demonstrated by experiments obtained using two 100-W, 10-MHz, two-phase Buck EAs capable of accurately tracking a 1.5-MHz bandwidth OFDM signal.

Planificación de una red 4G

La intensa evolución tecnológica que está experimentando nuestra sociedad en las últimas décadas hace que se estén desarrollando continuamente nuevas tecnologías que proporcionan mejoras tanto en la calidad como en la seguridad del servicio, este es el caso del 4G. A día de hoy, en España, la cuarta generación de comunicaciones móviles se ve encabezada por LTE, mientras que LTE-Advanced sólo se está implantando en las principales ciudades de nuestro país durante los últimos meses. Por este motivo, se ha creído interesante realizar una planificación sobre una zona que, hasta el momento, no está cubierta por cobertura LTE-Advanced. Además hay que tener en cuenta la naturaleza del terreno en el que trabajaremos, ya que se aleja del suelo urbano que encontramos en las principales ciudades con LTE-Advanced, como Madrid, Barcelona o Valencia. El estudio de esta zona semirural es de gran interés ya que uno de los objetivos de la cuarta generación es hacer llegar conexión a internet de calidad a lugares en los que no puede llegar la fibra óptica, como por ejemplo estas zonas semirurales. Para añadir aún más interés en el estudio, se ha decidido utilizar la banda de 800 MHz para el despliegue de la red. Esta banda que anteriormente era utilizada para la transmisión TDT, recientemente ha quedado liberada, en el conocido como Dividendo Digital para su uso en comunicaciones móviles. La tecnología LTE-Advanced se está empezando a desplegar en esta banda aunque realmente hasta Noviembre del año 2015 no tendremos un uso real de la misma, por lo que en estos momentos las redes 4G están utilizando la banda de 2.6 GHz. La utilización de la banda de 800 MHz conllevará mejoras tanto al usuario como a las operadoras, las cuales iremos viendo a lo largo del desarrollo del proyecto. La planificación pasará por distintas fases de optimización y expansión en las que se analizaran tanto la parte radioeléctrica como su capacidad. Se analizaran señales del tipo RSRP, RSSI o RSRQ y para el análisis de capacidad se definirá un conjunto de usuarios, distribuidos adecuadamente por toda la zona, que permitirá estudiar en detalle la capacidad de nuestra red. Para finalizar, se realizarán varias pruebas que demostrarán lo importante que es la tecnología MIMO tanto en LTE como en LTE-Advanced. ABSTRACT. Nowadays, our society is experiencing an intense pace of technological evolution which causes the constant development of new technologies. In the network planning area, these new technologies are focused on improving both quality and safety of service, with the recent deployment of 4G technologies in our networks. This project focuses on Spain, where the fourth generation of mobile communications is led by LTE, because LTE-Advanced has only been deployed in the largest cities, so far. The goal of this project is to plan, deploy and simulate LTE-Advanced network, of an area that hasn´t yet been covered. Furthermore, it will be taken into account the nature of the terrain where the network will be developed, as it moves away from urban areas in the major cities with LTE-Advanced, including Madrid, Barcelona and Valencia. The study of these semi-rural areas is extremely important because one of the main objectives of the fourth generation technologies is to get high-speed internet access to places that can be reached through other technologies, such as optical fiber. In order to adjust to the actual needs, the project was developed for the 800 MHz band. Those frequencies used to be assigned for digital terrestrial TV, but they have recently been released through the Digital Dividend in 2015 to use with mobile communications. That is the reason why, the LTE-Advanced technology in Spain is starting to be deployed in those frequencies. Despite the freeing of the 800 MHz band, it is not allowed to use it until November 2015, so 4G networks are currently using the 2.6 GHz band. The use of the 800 MHz band will led to advantages and improvements to users and operators, which will be detailed over the project. Each step of the planning of the 4G network is detailed. It is analyzed the optimization and expansion of the network, based on the radio and capacity premises. RSRP, RSSI or RSRQ signals were analyzed and an analysis of the network capacity was carried out. Finally, several tests are developed to show the importance of MIMO in LTE and LTE-Advanced.

Estudo e implementação de sinais de excitação aplicados em identificação de sistemas multivariáveis.

Devido à crescente implementação do Controle Preditivo baseado em Modelo (MPC) em outros processos além de refino e plantas petroquímicas, que geralmente possuem múltiplas entradas e saídas, tem-se um aumento na demanda de modelos gerados por identificação de sistemas. Identificar modelos que representem fielmente a dinâmica do processo depende em grande medida das características dos sinais de excitação dos processos. Assim, o foco deste trabalho é realizar um estudo dos sinais típicos usados em identificação de sistemas, PRBS e GBN, em uma abordagem multivariável. O estudo feito neste trabalho parte das características da geração dos sinais individualmente, depois é feita uma análise de correlação cruzada dos sinais de entrada, observando a influência desta sobre os resultados de identificação. Evitar uma alta correlação entre os sinais de entrada permite determinar o efeito de cada entrada sobre a saída no processo de identificação. Um ponto importante no projeto de sinais de identificação de sistemas multivariáveis é a frequência dos mesmos para conseguir excitar os processos nas regiões de frequência de operação normal e assim extrair a maior informação dinâmica possível do processo. As características estudadas são avaliadas por meio de testes em três plantas simuladas diferentes, categorizadas como mal, medianamente e bem condicionadas. Estas implementações foram feitas usando sinais GBN e PRBS de diferentes frequências. Expressões para a caracterização dos sinais de excitação foram avaliadas identificando os processos em malha aberta e malha fechada. Para as plantas mal condicionadas foram implementados sinais compostos por uma parte completamente correlacionada e uma parte não-correlacionada, conhecido como método de dois passos. Finalmente são realizados experimentos de identificação em uma aplicação em tempo real de uma planta piloto de neutralização de pH. Os testes realizados na planta foram feitos visando avaliar os estudos de frequência e correlação em uma aplicaficção real. Os resultados mostram que a condição de sinais completamente descorrelacionados n~ao deve ser cumprida para ter bons resultados nos modelos identificados. Isto permite ter mais exibilidade na geração do conjunto de sinais de excitação.

Estimation of Time-Limited Channel Spectra From Nonuniform Samples

This paper deals with the estimation of a time-invariant channel spectrum from its own nonuniform samples, assuming there is a bound on the channel’s delay spread. Except for this last assumption, this is the basic estimation problem in systems providing channel spectral samples. However, as shown in the paper, the delay spread bound leads us to view the spectrum as a band-limited signal, rather than the Fourier transform of a tapped delay line (TDL). Using this alternative model, a linear estimator is presented that approximately minimizes the expected root-mean-square (RMS) error for a deterministic channel. Its main advantage over the TDL is that it takes into account the spectrum’s smoothness (time width), thus providing a performance improvement. The proposed estimator is compared numerically with the maximum likelihood (ML) estimator based on a TDL model in pilot-assisted channel estimation (PACE) for OFDM.

Changes in the vegetation and trade winds in equatorial Northwest Africa 140,000-70,000 yr B.P., as deduced from two marine pollen records

The deep-sea cores M 16415-2 and M 16416-2 at about 9°N off Sierra Leone were analysed palynologically for the time interval 140,000-70,000 yr B.P. Results were presented in absolute (pollen concentration and pollen influx) and relative diagrams (pollen percentage). In a previous study it was evidenced that in northwest Africa pollen is mainly transported to the Atlantic by wind, so that the efficiency of aeolian pollen transport (pollen flux) could be used to evaluate changes in the intensity of the northeast trade winds. The glacial episodes (represented by the oxygen isotope stages 6 and 4) are characterized by strong northeast trade winds, whereas the last interglacial (stage 5) is characterized by weak trade winds. The pollen influx diagram shows that the intensity of the trade winds increased slightly during the relatively cool intervals of stage 5 (viz. 5.4 and 5.2). Tropical forest had maximally expanded around 124,000 yr B.P. (stage 5.5), around 98,000 yr B.P. (transition of stage 5.3 to 5.2), and around 70,000 yr B.P. (first part of stage 4): an increasing delay of the response of tropical forest to global intervals with maximum temperature is apparent during the last interglacial. As tropical forests need continuous humidity, the record of tropical forest monitors changes in climatic humidity south of the Sahara. During the last interglacial, the southern boundary of the Sahara shifted only little: expansions and contractions of the tropical forest area are correlated with contra-oscillations of the grass-dominated savanna zone. Great latitudinal shifts of the desert savanna boundary, on the contrary, occurred during the penultimate glacial interglacial transition (around 128,000 yr B.P.) to the north, and during the last interglacial-glacial transition (around 65,000 yr B.P.) to the south.

La carcajada : drama en tres actos y en prosa ...[y otras obras]

Mode of access: Internet.

A low-complexity lattice-based low-PAR transmission scheme for DSL channels

This paper presents a new low-complexity multicarrier modulation (MCM) technique based on lattices which achieves a peak-to-average power ratio (PAR) as low as three. The scheme can be viewed as a drop in replacement for the discrete multitone (DMT) modulation of an asymmetric digital subscriber line modem. We show that the lattice-MCM retains many of the attractive features of sinusoidal-MCM, and does so with lower implementation complexity, O(N), compared with DMT, which requires O(N log N) operations. We also present techniques for narrowband interference rejection and power profiling. Simulation studies confirm that performance of the lattice-MCM is superior, even compared with recent techniques for PAR reduction in DMT.

Robust stability of sequential multi-input multi-output quantitative feedback theory designs

This paper re-examines the stability of multi-input multi-output (MIMO) control systems designed using sequential MIMO quantitative feedback theory (QFT). In order to establish the results, recursive design equations for the SISO equivalent plants employed in a sequential MIMO QFT design are established. The equations apply to sequential MIMO QFT designs in both the direct plant domain, which employs the elements of plant in the design, and the inverse plant domain, which employs the elements of the plant inverse in the design. Stability theorems that employ necessary and sufficient conditions for robust closed-loop internal stability are developed for sequential MIMO QFT designs in both domains. The theorems and design equations facilitate less conservative designs and improved design transparency.

Implementing ICA in blind multiuser detection

This paper introduces a blind multiuser detection algorithm for MIMO channels. The receiver is required to separate and recover the information signal of the desired user(s) based on independent component analysis (ICA) of the received sequence. The received sequence is assumed to be independent identically distributed. Experimental results show that the proposed blind ICA multiuser detection works well with a short symbol sequence, even if the channel time span is not accurately estimated. It is concluded that the proposed blind multiuser detection performs better than the conventional matched filters in a noisy environment.

Microphone and loudspeaker arrays for room acoustic measurements

A multichannel spherical speaker array allows, together with a spherical microphones array, the measurement of the MIMO (Multiple Input Multiple Output) acoustic impulse response of an environment capturing meaningful information about propagation of sound between source an receiver. The mathematical framework for extracting arbitrary directivity virtual microphones from real microphones array signals is recalled and the application of the same method to the speakers array to generate arbitrary directivity source is presented. A convenient solutions for the construction and calibration of speakers spherical array for measurement purposes is illustrated. The postprocessing technique developed to compute and visualize acoustic path between source and receiver from measured MIMO impulse response is discussed. Real word results from measurement in a small theater are shown.