Life cycle of Deccan trap magma chambers: A crystal scale elemental and strontium isotopic investigation

The Deccan Trap basalts are the remnants of a massive series of lava flows that erupted at the K/T boundary and covered 1-2 million km2 of west-central India. This eruptive event is of global interest because of its possible link to the major mass extinction event, and there is much debate about the duration of this massive volcanic event. In contrast to isotopic or paleomagnetic dating methods, I explore an alternative approach to determine the lifecycle of the magma chambers that supplied the lavas, and extend the concept to obtain a tighter constraint on Deccan’s duration. My method relies on extracting time information from elemental and isotopic diffusion across zone boundaries in individual crystals. I determined elemental and Sr-isotopic variations across abnormally large (2-5 cm) plagioclase crystals from the Thalghat and Kashele “Giant Plagioclase Basalts” from the lowermost Jawhar and Igatpuri Formations respectively in the thickest Western Ghats section near Mumbai. I also obtained bulk rock major, trace and rare earth element chemistry of each lava flow from the two formations. Thalghat flows contain only 12% zoned crystals, with 87 Sr/86Sr ratios of 0.7096 in the core and 0.7106 in the rim, separated by a sharp boundary. In contrast, all Kashele crystals have a wider range of 87Sr/86Sr values, with multiple zones. Geochemical modeling of the data suggests that the two types of crystals grew in distinct magmatic environments. Modeling intracrystalline diffusive equilibration between the core and rim of Thalghat crystals led me to obtain a crystal growth rate of 2.03x10-10 cm/s and a residence time of 780 years for the crystals in the magma chamber(s). Employing some assumptions based on field and geochronologic evidence, I extrapolated this residence time to the entire Western Ghats and obtained an estimate of 25,000–35,000 years for the duration of Western Ghats volcanism. This gave an eruptive rate of 30–40 km3/yr, which is much higher than any presently erupting volcano. This result will remain speculative until a similarly detailed analytical-modeling study is performed for the rest of the Western Ghats formations.

Integrated assessment of water conservation practices for sustainable management strategies

Miami-Dade County implemented a series of water conservation programs, which included rebate/exchange incentives to encourage the use of high efficiency aerators (AR), showerheads (SH), toilets (HET) and clothes washers (HEW), to respond to the environmental sustainability issue in urban areas. This study first used panel data analysis of water consumption to evaluate the performance and actual water savings of individual programs. Integrated water demand model has also been developed for incorporating property’s physical characteristics into the water consumption profiles. Life cycle assessment (with emphasis on end-use stage in water system) of water intense appliances was conducted to determine the environmental impacts brought by each practice. Approximately 6 to 10 % of water has been saved in the first and second year of implementation of high efficiency appliances, and with continuing savings in the third and fourth years. Water savings (gallons per household per day) for water efficiency appliances were observed at 28 (11.1%) for SH, 34.7 (13.3%) for HET, and 39.7 (14.5%) for HEW. Furthermore, the estimated contributions of high efficiency appliances for reducing water demand in the integrated water demand model were between 5 and 19% (highest in the AR program). Results indicated that adoption of more than one type of water efficiency appliance could significantly reduce residential water demand. For the sustainable water management strategies, the appropriate water conservation rate was projected to be 1 to 2 million gallons per day (MGD) through 2030. With 2 MGD of water savings, the estimated per capita water use (GPCD) could be reduced from approximately 140 to 122 GPCD. Additional efforts are needed to reduce the water demand to US EPA’s “Water Sense” conservation levels of 70 GPCD by 2030. Life cycle assessment results showed that environmental impacts (water and energy demands and greenhouse gas emissions) from end-use and demand phases are most significant within the water system, particularly due to water heating (73% for clothes washer and 93% for showerhead). Estimations of optimal lifespan for appliances (8 to 21 years) implied that earlier replacement with efficiency models is encouraged in order to minimize the environmental impacts brought by current practice.

Organizational Effectiveness Along Life-Cycle Stages: A Comparison Of Wendy's And McDonald's

"Perceptions of Organizational Effectiveness over Organizational Life Cycles" written by Kim S. Cameron and David S. Whetten, posits a theory regarding organizational effectiveness criteria change as firms develop along the life cycle continuum. Induced from observations obtained from a simulation game, the Cameron and Whetten theory is applied in this article to two real organizations, Wendy's and McDonald's, with the intention of demonstrating that this theory is applicable in "real life" situations.

Bioenergy and climate change mitigation : an assessment

Date of Acceptance: 08/05/2014 Acknowledgements The authors are indebted to Julia Römer for assisting with editing several hundred references. Helmut Haberl gratefully acknowledges funding by the Austrian Academy of Sciences (Global Change Programme), the Austrian Ministry of Science and Research (BMWF, proVision programme) as well as by the EU-FP7 project VOLANTE. Carmenza Robledo-Abad received financial support from the Swiss State Secretariat for Economic Affairs.

Bioenergy and climate change mitigation : an assessment

Date of Acceptance: 08/05/2014 Acknowledgements The authors are indebted to Julia Römer for assisting with editing several hundred references. Helmut Haberl gratefully acknowledges funding by the Austrian Academy of Sciences (Global Change Programme), the Austrian Ministry of Science and Research (BMWF, proVision programme) as well as by the EU-FP7 project VOLANTE. Carmenza Robledo-Abad received financial support from the Swiss State Secretariat for Economic Affairs.

The Life Cycle of Corporate Venture Capital

This paper establishes the life-cycle dynamics of Corporate Venture Capital (CVC) to explore the information acquisition role of CVC investment in the process of corporate innovation. I exploit an identification strategy that allows me to isolate exogenous shocks to a firm's ability to innovate. Using this strategy, I first find that the CVC life cycle typically begins following a period of deteriorated corporate innovation and increasingly valuable external information, lending support to the hypothesis that firms conduct CVC investment to acquire information and innovation knowledge from startups. Building on this analysis, I show that CVCs acquire information by investing in companies with similar technological focus but have a different knowledge base. Following CVC investment, parent firms internalize the newly acquired knowledge into internal R&D and external acquisition decisions. Human capital renewal, such as hiring inventors who can integrate new innovation knowledge, is integral in this step. The CVC life cycle lasts about four years, terminating as innovation in the parent firm rebounds. These findings shed new light on discussions about firm boundaries, managing innovation, and corporate information choices.

Seawater carbonate chemistry and effects of CO2 and their modulation by light in the life-cycle stages of the coccolithophore Emiliania huxleyi strains RCC 1216 and 1217 during experiments, 2012

The effects of ocean acidification on the life-cycle stages of the coccolithophore Emiliania huxleyi and their by light were examined. Calcifying diploid and noncalcifying haploid cells (Roscoff culture collection 1216 and 1217) were acclimated to present-day and elevated CO2 partial pressures (PCO2; 38.5 vs. 101.3 Pa, ., 380 vs. 1000 matm) under low and high light (50 vs. 300 mmol photons m-2 s-1). Growth rates as well as quotas and production rates of C and N were measured. Sources of inorganic C for biomass buildup were using a 14C disequilibrium assay. Photosynthetic O2 evolution was measured as a function of dissolved inorganic C and light by means of membrane-inlet mass spectrometry. The diploid stage responded to elevated PCO2 by shunting resources from the production of particulate inorganic C toward organic C yet keeping the production of total particulate C constant. As the effect of ocean acidification was stronger under low light, the diploid stage might be less affected by increased acidity when energy availability is high. The haploid stage maintained elemental composition and production rates under elevated PCO2. Although both life-cycle stages involve different ways of dealing with elevated PCO2, the responses were generally modulated by energy availability, being typically most pronounced under low light. Additionally, PCO2 responses resembled those induced by high irradiances, indicating that ocean acidification affects the interplay between energy-generating processes (photosynthetic light reactions) and processes competing for energy (biomass buildup and calcification). A conceptual model is put forward explaining why the magnitude of single responses is determined by energy availability.

Life-cycle modification in open oceans accounts for genome variability in a cosmopolitan phytoplankton

Emiliania huxleyi is the most abundant calcifying plankton in modern oceans with substantial intraspecific genome variability and a biphasic life cycle involving sexual alternation between calcified 2N and flagellated 1N cells. We show that high genome content variability in Emiliania relates to erosion of 1N-specific genes and loss of the ability to form flagellated cells. Analysis of 185 E. huxleyi strains isolated from world oceans suggests that loss of flagella occurred independently in lineages inhabiting oligotrophic open oceans over short evolutionary timescales. This environmentally linked physiogenomic change suggests life cycling is not advantageous in very large/diluted populations experiencing low biotic pressure and low ecological variability. Gene loss did not appear to reflect pressure for genome streamlining in oligotrophic oceans as previously observed in picoplankton. Life-cycle modifications might be common in plankton and cause major functional variability to be hidden from traditional taxonomic or molecular markers.

Life-cycle modification in open oceans accounts for genome variability in a cosmopolitan phytoplankton

Emiliania huxleyi is the most abundant calcifying plankton in modern oceans with substantial intraspecific genome variability and a biphasic life cycle involving sexual alternation between calcified 2N and flagellated 1N cells. We show that high genome content variability in Emiliania relates to erosion of 1N-specific genes and loss of the ability to form flagellated cells. Analysis of 185 E. huxleyi strains isolated from world oceans suggests that loss of flagella occurred independently in lineages inhabiting oligotrophic open oceans over short evolutionary timescales. This environmentally linked physiogenomic change suggests life cycling is not advantageous in very large/diluted populations experiencing low biotic pressure and low ecological variability. Gene loss did not appear to reflect pressure for genome streamlining in oligotrophic oceans as previously observed in picoplankton. Life-cycle modifications might be common in plankton and cause major functional variability to be hidden from traditional taxonomic or molecular markers.

Social media to support collaboration in the product life cycle of SMEs

Abstract : The use of social media tools to support small and medium-sized enterprises (SME) to support their business activities throughout the product life cycle (PLC) phases represents an interesting opportunity. SMEs operate in very competitive environments, and face significant challenges primarily caused by their size disadvantage. By nature, social media tools and platforms can enable them to overcome some of these challenges, as they are often very inexpensive, familiar and easy to use, allowing them to reach large audiences they would not be able to reach with traditional and expensive marketing initiatives. To provide solutions to this problem, this research identified three main objectives. The first objective was to draw a picture of the existing academic literature on the use of social media tools in the PLC context to better understand how these tools were studied and used in businesses, and for what purpose. Second, this research aimed at understanding how SMEs actually use social media tools to support their different business activities to identify the gap between academic research and actual business practices. Finally, based on the findings highlighted from the previous objectives, this research aimed at developing theory on this topic by proposing a conceptual framework of customer engagement enabled by social media. The conceptual framework aimed at answering general questions that emerged from the initial two objectives: Why do some SMEs use social media to support customer engagement, while others do not? Why do firms use different social media tools to support their customer engagement initiatives? Why does the scope of customer engagement initiatives (i.e., across different PLC phases) vary between SMEs? What are the potential outcomes of conducting customer engagement initiatives for the organizing firms? In order to achieve these research objectives, the methodology employed for this research is threefold. First, a systematic literature review was performed in order to properly understand how the use of social media tools in the PLC context had been studied. The final results consisted of 78 academic articles which were analyzed based on their bibliometric information and their content. Second, in order to draw the contrast between the academic publications and managerial reality of SMEs, six semi-structured interviews were conducted to understand how these firms actually use social media to support different activities in each of the PLC phases. Third, five additional semi-structured interviews were performed to gather a deeper understanding of this phenomenon and generate theory to support the proposed conceptual framework. The conceptual framework focuses on the degree of customer engagement, which is comprised of the scope (PLC phases) of customer engagement and the technology (social media tools) employed to support these initiatives. Two sets of antecedents were examined, firm motivators and firm impediments, as they could both potentially affect the scope and the social media tools used to support customer engagement initiatives. Finally, potential customer engagement outcomes for SMEs developing these initiatives were also examined. The semi-structured interviews lasted approximately 25-35 minutes, and were performed using an interview grid consisting of 24 open-ended questions. The interview grid was developed based on the findings of the systematic literature review, and this qualitative approach allowed for a rich understanding of the interviewed SMEs’ use of social media tools to support and engage customers in their different PLC activities. The main results highlighted by this project demonstrate that this field is relatively recent and sees constant increase in research interest since 2008. However, most of the academic research focuses on the use of social media tools to support innovation activities during the new product development process, while the interviewed firms almost exclusively used the tools to engage customers in the later phases of the PLC, primarily for promotion, customer service support, and business development activities. Interestingly, the interviewed firms highlighted several benefits of using social media tools to engage customers, some of which could help them overcome certain size disadvantages previously mentioned. These firms are in need of further guidelines to properly implement such initiatives and reap the expected benefits. Results suggest that SMEs are far behind both large companies and academic research in their use of social media to engage customers in different business activities. The proposed conceptual framework serves as a great tool to better understand their reality and eventually better support them in their social media and customer engagement efforts. However, this framework needs to be further developed and improved. This research project provides a 360-degree view of the phenomenon of the use of social media to support customer engagement for SMEs, by providing both a thorough systematic review of the academic research and an understanding of the managerial reality of SMEs behind this phenomenon. From this analysis, a conceptual framework is then proposed and serves as a stepping stone for future researchers who are interested in developing theory in this field.

Different approaches to municipal solid waste management in Brazil : case study Rio de Janeiro

Inadequate final disposal of municipal solid waste (MSW) is associated with significant greenhouse gas (GHG) emission, environmental, health and safety issues, space consumption, public health and developmental issues in general. The environmental impact of waste is mostly felt in developing countries, inadequate waste management and treatment solution, inadequate policies and outdated practices are some of the factors leading to the significantly high final disposal of waste in dumps in developing countries. Brazil and other developing countries are changing the status quo by adopting polices that will adequately address this problem of inadequate waste management and disposal. Life cycle analysis (LCA) identifies the potential environmental impact of a product though environmental impact assessment, International Organization for Standardization (ISO) created the ISO 14040 and ISO 14044 to serve as principle guidelines for conducting LCA. Various waste treatment solution was applied to identify the waste management solution with the least Global warming potential (GWP) for treating the MSW generated from the city of Rio de Janerio, while reducing significantly final waste disposed in landfill.

A life cycle framework for governance of Intermodal terminals; planning, operations and strategic management.

This chapter establishes a framework for the governance of intermodal terminals throughout their life cycle, based on the product life cycle. The framework covers the initial planning by the public sector, the public/private split in funding and ownership, the selection of an operator, ensuring fair access to all users, and finally reconcessioning the terminal to a new operator, managing the handover and maintaining the terminal throughout its life cycle. This last point is especially important as industry conditions change and the terminal's role in the transport network comes under threat, either by a lack of demand or by increased demand requiring expansion, redesign and reinvestment. Each stage of the life cycle framework is operationalised based on empirical examples drawn from research by the authors on intermodal terminal planning and funding, the tender process and concession and operation contracts. In future the framework can be applied in additional international contexts to form a basis for transport cost analysis, logistics planning and government policy.

Life cycle management of TVO nuclear power plant

Tämä diplomityö tutkii eri elinkaarihallinnan menetelmiä ja vertaa niitä TVO:n menetelmiin. Lisäksi TVO:n prosessin ongelmakohdat tunnistetaan ja niihin esitetään ratkaisuja. Vertailukohteina toimii ydinvoimateollisuuden lisäksi vesivoima, fossiiliset voimalaitokset sekä paperiteollisuus. Sähkön hinnan jatkaessa laskuaan on elinkaariajattelusta tullut ajankohtaista myös ydinvoimayhtiöille. Ydinvoimalaitoksien pitkän suunnitellun käyttöiän ansiosta laitoksen elinkaaren aikana voi tapahtua useita asioita, jotka vaikuttavat laitoksen investointitarpeisiin. Turvallisen sähköntuotannon varmistamiseksi eri laitososia on joko muokattava tai uusittava. Elinkaariajatteluun kuuluu tehokas laitoksen kunnon valvonta, laitoksen ikääntymiseen vaikuttavien ilmiöiden tunnistaminen, sekä ikääntymistä hillitsevien toimenpiteiden pitkän tähtäimen suunnittelu. Hyvällä ennakkosuunnittelulla pyritään varmistamaan se, että laitoksella voidaan tuottaa sähköä koko sen jäljellä olevan käyttöiän aikana. Kun tarpeiden tunnistus ja suunnittelu tehdään hyvissä ajoin mahdollistetaan myös investointien optimointi. Paras hyöty pyritään saamaan ajoittamalla oikeat investoinnit oikeaan aikaan.

Engraulis encrasicolus (Linnaeus, 1758): technical report about extraction and recognition of the digestive tract contents in early stages of the life cycle

The study of ichthyio-plankton stages and its relations with the environment and other organisms is therefore crucial for a correct use of fishery resources. In this context, the extraction and the analysis of the content of the digestive tract, is a key method for the identification of the diet in early larval stages, the determination of the resources they rely on and possibly a comparison with the diet of other species. Additionally this approach could be useful in determination on occurrence of species competition. This technique is preceded by the analysis of morphometric data (Blackith & Reyment, 1971; Marcus, 1990), that is the acquisition of quantitative variables measured from the morphology of the object of study. They are linear distances, count, angles and ratios. The subsequent application of multivariate statistical methods, aims to quantify the changes in morphological measures between and within groups, relating them to the type and size of prey and evaluate if some changes appear in food choices along the larvae growth.

Activity-based life cycle costing model for cost estimation and monitoring – Case: manned and autonomous dry bulk carrier

Recent developments in automation, robotics and artificial intelligence have given a push to a wider usage of these technologies in recent years, and nowadays, driverless transport systems are already state-of-the-art on certain legs of transportation. This has given a push for the maritime industry to join the advancement. The case organisation, AAWA initiative, is a joint industry-academia research consortium with the objective of developing readiness for the first commercial autonomous solutions, exploiting state-of-the-art autonomous and remote technology. The initiative develops both autonomous and remote operation technology for navigation, machinery, and all on-board operating systems. The aim of this study is to develop a model with which to estimate and forecast the operational costs, and thus enable comparisons between manned and autonomous cargo vessels. The building process of the model is also described and discussed. Furthermore, the model’s aim is to track and identify the critical success factors of the chosen ship design, and to enable monitoring and tracking of the incurred operational costs as the life cycle of the vessel progresses. The study adopts the constructive research approach, as the aim is to develop a construct to meet the needs of a case organisation. Data has been collected through discussions and meeting with consortium members and researchers, as well as through written and internal communications material. The model itself is built using activity-based life cycle costing, which enables both realistic cost estimation and forecasting, as well as the identification of critical success factors due to the process-orientation adopted from activity-based costing and the statistical nature of Monte Carlo simulation techniques. As the model was able to meet the multiple aims set for it, and the case organisation was satisfied with it, it could be argued that activity-based life cycle costing is the method with which to conduct cost estimation and forecasting in the case of autonomous cargo vessels. The model was able to perform the cost analysis and forecasting, as well as to trace the critical success factors. Later on, it also enabled, albeit hypothetically, monitoring and tracking of the incurred costs. By collecting costs this way, it was argued that the activity-based LCC model is able facilitate learning from and continuous improvement of the autonomous vessel. As with the building process of the model, an individual approach was chosen, while still using the implementation and model building steps presented in existing literature. This was due to two factors: the nature of the model and – perhaps even more importantly – the nature of the case organisation. Furthermore, the loosely organised network structure means that knowing the case organisation and its aims is of great importance when conducting a constructive research.